Loading Issue in PSA..
Hi Xperts,
when i am loading the data in PSA.it takes longer time.
And when i am checking in ST22.i am getting this dump message,
"DBIF_RSQL_SQL_ERROR CX_SY_OPEN_SQL_DB"
Error text message,
CALL FUNCTION 'RSDU_DB_COMMIT'. "Commit falls duprec bei insert!
c_lines = 0.
SORT g_t_u BY
KEY_DPCW03TDP
KEY_DPCW03TDT
KEY_DPCW03TDU
KEY_DPCW03TD1
KEY_DPCW03TD2
KEY_DPCW03TD3
KEY_DPCW03TD4
INSERT (l_facttab) FROM TABLE g_t_u.
c_lines = sy-dbcnt.
Check requid if no inconsistency is happened********************
CALL FUNCTION 'RSM_INFOCUBE_WRITE_CHECK'
EXPORTING
i_infocube = 'DPCW03TD'
i_rnsid = i_req_sid
EXCEPTIONS
write_not_allowed = 1
i have created the generic data source by using infoset queries(having two different data sources).
And i have successfully transported the data sources to quality.Now when i am executing the infopackage.i am getting the above error in monitor screen.
i have also got some other error messages when loading to PSA.
The messages are,
TSV_TNEW_OCCURS_NO_ROLL_MEMORY
CALL_FUNCTION_SEND_ERROR
CALL_FUNCTION_REMOTE_ERROR
OBJECTS_TABLES_NOT_COMPATIBLE
OBJECTS_OBJREF_NOT_ASSIGNED---CX_SY_REF_IS_INITIAL.
HI,.
DBIF_RSQL_SQL_ERROR CX_SY_OPEN_SQL_DB is an Error related to table space.
Sytem will show this error is your table space is less.
This can happen if
1. multiple loads are running on same table.
or
2. There exist old log files in table which should be cleared on regular interval
Ask your DBA team to increase the table space and schedule the load again.
regards,
Tate.
Similar Messages
-
Data Loading issues in PSA and Infocube
Hi team,
i am loading data into PSA and from there into info cube via a DTP,
when i load data into PSA all 6000 records are transfered to PSA and process is completed sucessfully,
When i execute the DTP to load data into info cube the data load process is completed sucessfully but when i observe
the "manage" tab i see
"Transferred 6000 || Added Records 50"
i am not able to get as why only 50 records are loaded into infocube and if some records are rejected where can i find them and the reason for that,
kindly assist me in understanding this issue,
Regards
bshi,
The records would have got aggregated based on common values.
if in source u had
custname xnumber kf1
R 56 100
R 53 200
S 54 200
after aggregation u will have
custname kf1
R 300
S 200
if u do not have xnumber in your cube.
Hope it is clear now.
Regards,
Rathy -
Hi Xperts,
when i am executing the infopackage in monitor screen i am getting error messgae.
"CALL_FUNCTION_REMOTE_ERROR".
As i am unable to load the data into PSA.
can any one please help me on this?
Regards,
satishHi Satish,
Please check the connection between the BW & the source system. Goto your source system> Right click> check.
If there is any error, check with the Basis people.
Hope it helps!
Regards,
Pavan -
Error in loading data from PSA to masterdataTables by using ProcessManually
Hello,
While loading Attribute master data to Masterdata tables, the data is loaded successfully to PSA but when I clicked process manually tab in the monitor screen to load the Attribute master data to Masterdata tables it is showing error.
Can anyone pls help me in solving this issue.
Thanks,
SoujanyaHi Soujanya,
If it is a SAP BI 7 data flow, in order to load data from PSA to the InfoObject master data tables, you have to run the corresponding DTP.
On the other hand, if it is a SAP BW 3.x data flow, the InfoPackage should be configured so as to update data to subsequent targets (that is to say, the InfoObject).
Finally, take into account that if the DataSource provides duplicate records, the DTP or the InfoPackage (depending on the dataflow version) should be configured in order to deal with it. Otherwise, you could receive error messages during data load.
I hope this helps you.
Regards,
Maximiliano -
Data Load Issue "Request is in obsolete version of DataSource"
Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
SamitHi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu. -
How to load data from PSA in BI 7.0
Hi,
Gurus
I'm trying to load data from PSA to my InfoObject masterdata but I can't get the change mode, so I change the processing to data Target.Right now its on PSA only
I will reward poaints
Regards
AlexHi,
I am just a beginner in 7.0, i had the same issue I loaded the master data in PSA but couldn't load in Data target i.e. info object (correct me if my understanding of your problem is wrong).
Try these steps:
1) Create and activate Transformation.
2) Create and activate DTP first then in DTP itself in <b>Execute tab</b> click "execute" ,go to infoobject right click on the info object you have created and select "maintain info object" , the datas will be loaded into info object
*Please assign points if useful. -
SAP Mobile Sales 2.0 delta load issue for Sales Orders
Hello,
we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
Background
Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
Settings and troubleshooting so far
We don't have any limitations for sales orders in CRM Sales Mobile configuration.
We've run delta loads for all objects in transaction SDOE_LOAD.
MAS_CUSTOMIZATION etc seem fine.
We've re-run initial load for sales orders from CRM.
In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
Checked steps suggested in discussion
SAP CRM 2.0 initial load issue
Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
If I change one of those historical sales orders in the backend, it gets sent to the device.
If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.First Doubt i got clarify by my self as we can go with Unwired Runtime option .
But i still have doubt in :
2. How can i Modifying the Main Menu for iOS.
i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
Same how can i do for iphone/ipad. -
Hello all,
I am using Oracle 6i for report and oracle10g for the database.I have created a matrix report in oracle Report but which report taking so much time to show the output it almost taking more than 10 minutes,at the same time that query executed within 1 minute in toad which used in matrix report.
kindly guide me how to solve the loading issue.I did not used any formula column in my report,all the values are taking from query.
But I used different types of format trigger in my report for the coloring purpose.Does it make any problem? -
Long time to load data from PSA to DSO -Sequential read RSBKDATA_V
Hi ,
It is taking long time to load data from PSA to DSO. It is doing Sequential read on RSBKDATA_V and table contents no data .
we are at - SAPKW70105. It started since yesterday . There is no changes in system parameters.
Please advice.
Thanks
NileshHi Nilesh,
I guess the following SAP Note will help you in this situation.
[1476842 - Performance: read RSBKDATA only when needed|https://websmp107.sap-ag.de/sap/support/notes/1476842]
Just note that the reference to Support Packages is wrong. It is also included in SAP_BW 701 06. -
Hi,
right now there are nearly 50 requests in my PSA. I want to load entire data from PSA to ODS at a time. Ours is 3.x flow. I m able to load one request at a time. Can anyone help me to load all requests at atime?
Please give me step by step.Hi Narendra,
First of all all the records are unable to pick up at a time i single attempt due to. follow the reason
It is not possible to load all the PSA requests' to target at a time.Because records picks up from PSA to Data target one by one due dependencies of routine run on the data transfer up to the extent. anyway if you can do this thing the process of loading the requests' one by one, offcourse it is totally depends upon manual .
Hope you are understood the scenario.
Regards,
Vamsi Krishna Chandolu -
Load fails while running a Process Chain even before loading to the PSA.
Hi Experts,
We are working on BI 7.0 and ECC 6.0 on an IS-U Project.
We are loading Transaction Data using Process Chains. Data load is failing even before loading to the PSA and the error message is as below:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Inbound Processing
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Had anyone come across this type of error, if so, what could be the reason of failure and probable solution.
Your time is very much appreciated.
Thanks in Advance.
Best Regards,
Chandu.Hi,
It might be a network connection between the source system and BW? Can you get your Basis colleague to look into the connection?
Hope this helps.
Cheers,
Gimmo -
Error when i am loading data from PSA to ODS
hai Gurus
Very good morning
Actually i am loading data from PSA to ODS.
But when i am loading data i am getting the error InfoObject/BIC/0REFER_DOC does not contain ALPHA -CONFORMING VALUE 0.
Can anybody help me to solve the problem and reload the data
Thanks & Regards
JayavardhanHi,
Lacs of postings are there in this forum on this topic. Searching teh forum is the best option for u now.
With rgds,
Anil Kumar Sharma .P -
Urgent : Error while loading data from PSA to DSO
Hi,
I am working on 7.0.
When i look for data into PSA then i have 1 date field which is containing data in proper date format. This date field is mapped with 0CALMONTH & 0CALYEAR for which i have written routine and directly assigned to 0DOC_DATE .
I have written a start routine to do some modifications in SOURCE_PACKAGE.
But When i am loading data from PSA to DSO its giving below error:
" Exception wrong_date ; see long text RSTRAN 303
Diagnosis
An exception wrong_date was raised while executing function module
RST_TOBJ_TO_DERIVED_TOBJ .
System Response
Processing the corresponding record has been terminated.
Procedure
To analyze the cause, set a break point in the program of the
transformation at the call point of function module
RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
investigate the cause. "
I am not getting why this error is coming up
pls guide me !!you can map the code to DOC_DATE .
The code is used to read from any date and convert that into Fiscal year/period.
Try this code.
data: l_fiscyear type t009b-bdatj.
call function 'FISCPER_FROM_CALMONTH_CALC'
exporting
id_date = COMM_STRUCTURE-doc_date
iv_periv = 'V9'
importing
ev_fiscyear = l_fiscyear.
result value of the routine
RESULT = l_fiscyear. -
Index.php loading issue
I finished and uploaded a new site in .php.
I have a graphics loading issue only with IE.
The js accordion with images will not reload after returning to the home page.
Anyone out thier that can shed some light on this?
http://carpetcleaningsantabarbarapro.com/index.php
Thank you in advance
CrissymarieKen might be on to something. The current release of jQuery is 1.7.2 which is compatible with jQuery Cycle.
For the latest core library, you can link to jQuery's CDN like so:
<script type="text/javascript" src="http://code.jquery.com/jquery-latest.min.js"></script>
You have some improperly nested <h3> tags around your lists on lines 170 and 191. To keep your code error free, simply delete the heading tags.
Finally, as a courtesy to your site visitors, consider adding a cookie so people don't have to watch the Flash Spokesperson every time they go to your home page. The link below shows how:
http://alt-web.com/DEMOS/cookie-test-show-hide-flash-intro.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/ -
I am having an issue where the data that drives a tilelist
works correctly when the tile list is not loaded on the first page
of the application. When it is put on a second page in a viewstack
then the tilelist displays correctly when you navigate to it. When
the tilelist is placed in the first page of the application I get
the correct number of items to display in the tilelist but the
information the item renderer is supposed to display, ie a picture,
caption and title, does not. The strange thing is that a Tree
populates correctly given the same situation. Here is the sequence
of events:
// get tree is that data for the tree and get groups is the
data for the tilelist
creationComplete="get_tree.send();get_groups.send();"
<mx:HTTPService showBusyCursor="true" id="get_groups"
url="[some xml doc]" resultFormat="e4x"/>
<mx:XMLListCollection id="myXMlist"
source="{get_groups.lastResult.groups}"/>
<mx:HTTPService showBusyCursor="true" id="get_tree"
url="[some xml doc]" resultFormat="e4x" />
<mx:XMLListCollection id="myTreeXMlist"
source="{get_tree.lastResult.groups}"/>
And then the data provider of the tilelist and tree are set
accordingly. I tried putting moving the data calls from the
creation complete to the initialize event thinking that it would
hit earlier in the process and be done by the time the final
completion came about but that didn't help either. I guess I'm just
at a loss as to why the tree works fine no matter where I put it
but the TileList does not. It's almost like the tree and the
tilelist will sit and wait for the data but the item renderer in
the tilelist will not wait. Which would explain why clicking on the
tile list still produces the correct sequence of events but the
visual component of the tilelist is just not working right. Anyone
have any ideas?Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.
Maybe you are looking for
-
I have a MacBook 13" Intel. I want to connect it to a LG 50" HDMI plasma TV so as to use Front Row on the bigger screen. i bought mini DVI to HDMI cable and HDMI cable,now its connected but the tv screen show only mackbook desktop picture n nothin on
-
Installed new version of iTunes and now my library is gone.
I installed the latest version of iTunes when I got a prompt on opening iTunes. When the installation was complete, all of my music was gone. I found my library and thought I imported it to my library correctly, but every time I quit iTunes, the next
-
Cannot connect to the Service Manager portal WCF service - Error when opening SM Portal
Greetings, I have tried everything I can think of to resolve this issue and I have tried all suggestions I have found on Technet. Basically, I had the SM Portal working on a test VM. I am ready to use it in production but it is not working. I delet
-
How can I "proxy edit:" a high-definition project?
This is an undocumented process, created by the always amazing Robert Johnston, and a good solution if you find that editing HDV and AVCHD video natively puts too much stress on your system's resources. Proxy editing temporarily substitutes a sort of
-
Hi all, I am looking for source system field in FCH8 or F-44 transactions. Can any one let me know what would be this field. Thanks Khan