Loading multiple projects

I upgraded from CP4 to CP5 in order to be able to load a rather large project that I have.
It's at 377 slides in total using Optimized output.
I even tried making smaller projects and published them to the same directory but can't get the projects to load from one antoher.
What am I missing?

i have tried with optional client installed on another VM (not a citrix one) on the same network as the database (all the servers are on a remote hosted environment) and get intermittent results. Sometimes they open again ok and then more often than not there is the delay in opening (hits 98% and then just gets stuck at that point for a few minutes). It even comes up (Not Responding) on the window at times.
The database session is inactive so it is as if the client is crunching the data but its got me stumped at this stage.
Its logged with Oracle Support who havent got an answer yet.

Similar Messages

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around....
Hi Guys, I upgraded from FCPX 10.0.6 to 10.0.78 and discovered to my immense frustration that many of my 100+ FCPX projects would not load.
Symptom:
FCPX 10.0.7 appears to hang ("spinning beachball") with either high CPU% on a single core or with 1-2% CPU busy (activity monitor.app) when a FINAL CUT PROJECT is selected. No logs error information in /var/logs ..hmm
notices that the "status circle" spins around endlessly.
Actvity Monitor.app shows "Final Cut Pro (Not Responding)
and also I notice in some cases that an OEM filter ("NEAT VIDEO NOISE REDUCTION") is in progress to be loaded. FCPX V10.0.7 must be FORCED QUITtted to remove it from system.
History: Upgraded FCPX from V10.0.6 to V10.0.07.
"FINAL CUT EVENTS" and "FINAL CUT PROJECTS" on a single file system on SAS 16TB disk array (768MB/sec read via AJA system test) and 60% utilised capacity… FCP EVENTS has 400 events in it .. some 5.2TB of Prores essence etc .. all works fine! (i.e. the storage system is first class and is NOT the issue)
32GB of RAM on MAC PRO 2009 Nehalem 16 x Vcore with ATI 5780 card and ATTO HBA's (i.e. plenty of resources!)
As usual with any "upgrade" to FCPX 10.0.? all the EVENT objects need to be upgraded. In my case this takes an hour or two.. so I do that when asleep.
After experiencing above, I restored the FCPX EVENTS LIbrary of that file system from LTO4 tape archive (BRU-PE ) and still had the same issues as above.
WORKAROUND:
FORCEd QUIT FCPX V10.0.7
RENAMEd "/volumes/some_file_system_volume/Final Cut Projects" to "/volumes/some_file_system_volume/Final Cut Projects_original"
created (make) a new "/volumes/some_file_system_volume/Final Cut Projects" (use finder)
For each project !!! in "/volumes/some_file_system_volume/Final Cut Projects_original", (do one project at a time!!!)
MOVE "/volumes/some_file_system_volume/Final Cut Projects_original/one_fcpx_projext_nnnn_folder" to "/volumes/some_file_system_volume/Final Cut Projects"
Make sure you move ONLY one project at a time. If you have a subfolder of projects, please do each project one at a time (serially!)
Launch FCPX V10.0.7 and BE PATIENT!!! .. DONT click or fiddle with the UI.. it seems when you intervene it locks up as well…
Let FCPX V10.0.7 settle….
select the project you just added above and RELINK any objects it needs. Thumbnails and proxies will be rendered again.. just be patient
wait until ALL the rendering as stopped.
QUIT FCPX V10.0.7
(now if FCPX locks up, just force it out and start again as above).
repeat for all projects in "/volumes/some_file_system_volume/Final Cut Projects_original" (go to step 4 ad do until all projects moved)
When all is COMPLETED MAKE SURE YOU ARCHIVE an instance (or make a backup ) of "/volumes/some_file_system_volume/Final Cut Projects"
If this procedure has worked the folder "/volumes/some_file_system_volume/Final Cut Projects_original" will have zero (nill, none) projects in it.
I have managed to restore ALL my "/volumes/some_file_system_volume/Final Cut Projects" this xmas between drinking etc. I'm satisfied that its all ok.
Other issues:
use DISK WARRIOR or TT PRO 6 to make sure that the file system volume where your "/volumes/some_file_system_volume/Final Cut Projects" are is physically ok. I noticed some entries in file system's volume table that represented objects in "/volumes/some_file_system_volume/Final Cut Projects" were at fault when I used these utilities… FWIW.
SUMMARY: yes this took ages to d, however luckily I had everything in at least 3 instances in an archive which has saved me many time in the old FCP& and prior days… it was just a matter of time to put it back together.
I put this outage down to may be my own impatience when I first fired up FCPX 10.0.7 after the upgrade.
I'm interested if this workaround is helpful to others and in addtiion if others have a more satisfactory remedy.
HTH
warwick
Hong Kong

Hi Eb, yeah I could not see any "memory leak" or unusual consumption of REAL memory whose less availability would cause excessive PAGEing and SWAPping as seen in the Activty Monitor.app
I watch this carefully especially the use of REAL MEMORY by 3rd Paryy apps. BTW there are a few that cause ALLOCATED but NOT USED memory (blue in the A.M.app UI). Simply a unix PURGE command can release that memory and help clean up the PAGE and VM swap files (its alleged!).
Yes, you may be might with the element of "Luck" involved. I would add though, that having MULTIPLE project displaying in the STORYLINE window and loading always caused my FCP 10.0.7 jam up at startup with h symtoms and observations I described.
TIP: I might also add that for a super speedy launch of FCPX one may also emply setting each PROJECT's UI to show only AUDIO thus negating the need to contstruct or reneder out a PREVIEW ui in each clip in the storyline.
Your/Apples suggestion of the movememt (rename) of "Final Cut Pro Projects" to "Final Cut Pro Projects Hidden" is similar to what I proposed above to stop FCPX 10.0.7 accessing and building it up at startup. This workaround has been useful inthe past as well.
ALso one might also get the stick out and remove (delete/rm) the ~/Library/Saved Application State/com.apple.FinalCut.savedState in one's home ~/Library so that FCPX wont do such a neat job reinstating FCPX last time you crashed it... This has been helpful also in diagnosing my issues.
Lastly I have noticed that:
impatience clicking on the FCPX UI when in the unstable state causes it to lock up with NO visible CPU% busy.... as if its waiting on something which is usually me MEMTERMing it via FORCE QUIT and
the projects where I have employed the NEAT VIDEO Noise Reduction OEM filter for FCPX seem to exasserbate the PROJECT loading issues when several PROJECTS are available at FCPX startup time.
As of yesterday I have some 400+ EVENTS Final Cut Pro Events and 130+ projects of varying compexites in a single file system on Final Cut Pro Projects all working fine and as good as gold again!
Oh and one more thing, I had to RE-RENDER many projects of them again... strange as the FCP PROJECT library was renstated from a recent LTO archive as of V10.0.6 FCPX.. strange that...I would have expected if the projects and events were 10.0.6/7 compatable as proposed by Tom, that this would not be necessary... hmm straneg that
I'll monitor this thread.
Thanks for your comments lads!

Making multiple projects into one SCORM

I have made multiple Captivate 5 projects that need to transform into one SCORM Module on my moodle LMS website, and count as one SCORM Quiz/Test. I've tried to even load multiple projects in one zip, but it failed to jump to the other projects when I had them all linked together leaving only this: "loading..." when I click the button to open project on the SCORM package. Please Help... Thanks...

I'm assuming here that your questions are related to the fields in the Quiz Preferences in Captivate.
The Objective ID is the same for all reporting elements in a given module. The Interaction ID Prefix just helps to distinguish which particular module your question data came from if you happen to be viewing it on drilldown inside your LMS. As long as it's not the same prefix as for other modules, it should be fine.
In the Multi-SCORM Packager dialog, the information you add to the fields will be written to the imsmanifest.xml file for the overall package:
Identifier is to provide an ID for your course that will be unique in your LMS. This will also be used to generate the filename of the final zip file.
Title is the name of the course.
Description may or may not be required by your LMS. Test and see. In some LMSs this info gets displayed to the user when viewing a synopsis of the course.
Version is the version of the package. I actually use the date reversed for my versioning (20110520a) with a letter on the end in case I output more than one version on a given day.
Duration is important to add. Some LMSs won't regard your package as compliant without this.
Subject is not something I've generally worried about, but it doesn't hurt to put a brief phrase on what the course topic material is about (e.g. Health and Safety)

How to load multiple .wrl (VRML) files?

Hi all,
I need to load four components of a coffee table into the virtual universe, the four components are top, base, left leg and right leg. I use four parts not one whole single object because in this way when I change the size of this furniture, I can make the thickness of the edges fixed, which is a must. The four parts consist a table correctly in the design software TopSolid, but when I load the four .wrl ojbect files seperately in the application, they cannot compose a table correctly. I guess the reason is the four components have been resized and translated automatically in the VRML loader. I have reviewed the source code of the VRML loader and some related source code but not be able to find where the auto resize code is.
I have used four Wavefront .obj files instead to do another technical demonstration, if I disable the ObjectFile.RESIZE flag, and just scale the four parts by myself using the same scale factor, I can get a perfect coffee table, with every part in correct location. But my supervisor insist on using VRML .wrl files in our project.
I hope someone can give me some kind instructions or advises on how to do it in VRML97 loader (https://j3d-vrml97.dev.java.net/).
Any help will be highly appreciated.

Answered here : http://www.java.net/forum/topic/javadesktop/java-desktop-technologies/java-3d/trying-load-multiple-wrl-vrml-files-same

Problem in Loading Multiple image in Single Sprite/MovieClip

Hi All,
I am having a killing problem in loading multiple images in single movie clip/sprite using a separate class.
Here is the ImageLoader.as class
package com.project.utils{
    import com.project.*;
    import com.project.utils.*;
    import flash.events.EventDispatcher;
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.events.ProgressEvent;
    import flash.display.Loader;
    import flash.events.IOErrorEvent;
    import flash.net.URLLoader;
    import flash.events.MouseEvent;
    import flash.net.URLRequest;
    import flash.display.Bitmap;
    public class ImageLoader extends EventDispatcher {
        public var imgloader:Loader;
        public var imgMc:MovieClip;
        public var imgObject:Object;
        public var loaded:Number;
        public function ImageLoader():void {
            imgMc = new MovieClip();
            imgObject = new Object();
            imgloader = new Loader();
        public function loadImage(imgHolder:MovieClip, imgObj:Object):void {
            imgMc = new MovieClip();
            imgObject = new Object();
            imgloader = new Loader();
            imgMc = imgHolder;
            imgObject = imgObj;
            imgloader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoad);
            imgloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onImgLoadProgress);
            imgloader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,onImageLoadFailed);
            imgloader.load(new URLRequest(imgObj.FilePath));
        private function onImgLoad(Evt:Event):void {
            var image:Bitmap = Bitmap(Evt.target.content);
            try {
                imgMc.removeChildAt(0);
            } catch (error:Error) {
            imgMc.addChild(image);
            try {
                if (imgObject.URL != undefined) {
                    imgMc.buttonMode = true;
                    imgMc.removeEventListener(MouseEvent.CLICK, onImageClicked);
                    imgMc.addEventListener(MouseEvent.CLICK, onImageClicked);
            } catch (err:Error) {
            dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD"));
        private function onImageClicked(evt:MouseEvent):void {
            trace("Image Attrs:"+imgObject.URL +" Target "+imgObject.Target);
        private function onImgLoadProgress(Evt:ProgressEvent):void {
            if (Evt.bytesLoaded>0) {
                loaded = Math.floor((Evt.bytesLoaded*100)/Evt.bytesTotal);
                dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_PROC",loaded));
        private function onImageLoadFailed(Evt:IOErrorEvent):void {
            trace("Image Loading Failed");
            dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_FAIL"));
Here I am loading some images using the above class in a for loop, like
            for (var i=0; i < 3; i++) {
                //imgLoader=new ImageLoader;
                imgLoader.addEventListener("CustomEvent.ON_IMGE_LOAD",onImageLoad);
                var target:MovieClip=videolist_mc["list" + mcCount + "_mc"];
                target.list_mc.visible=false;
                var imgObj:Object=new Object;
                imgObj.FilePath=list[i].Thumbnail;
                imgObj.Url=list[i].Url;
                imgObj.Target=list[i].Target;
                target.list_mc.urlObj=new Object ;
                target.list_mc.urlObj=imgObj;
                imgLoader.loadImage(target.list_mc.imgholder_mc,imgObj);
                target.list_mc.lable_txt.htmlText="<b>" + list[i].Label + "</b>";
                target.list_mc.imgholder_mc.buttonMode=true;
                target.list_mc.imgholder_mc.addEventListener(MouseEvent.CLICK,onItemPressed);
                mcCount++;
In this case, the ImageLoader.as works only on the last movie clip from the for loop. For example, if i am trying to load three image in three movie clips namely img_mc1,img_mc2 and img_mc3 using the for loop and ImageLoader.as, I am getting the image loaded in the third movie clip only img_mc.
See at the same time, If i uncomment onething in the for loop that is
//imgLoader=new ImageLoader;
its working like a charm. But I know creating class objects in a for loop is not a good idea and also its causes some other problems in my application.
So, help to get rid out of this problem.
Thanks
-Varun

package com.project.utils{
    import com.project.*;
    import com.project.utils.*;
    import flash.events.EventDispatcher;
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.events.ProgressEvent;
    import flash.display.Loader;
    import flash.events.IOErrorEvent;
    import flash.net.URLLoader;
    import flash.events.MouseEvent;
    import flash.net.URLRequest;
    import flash.display.Bitmap;
    public class ImageLoader extends EventDispatcher {
        public var imgloader:Loader;
        public var imgMc:MovieClip;
        public var imgObject:Object;
        public var loaded:Number;
        public function ImageLoader():void {
// better add you movieclip to the stage if you want to view anything added to it.
            imgMc = new MovieClip();
            imgObject = new Object();
            imgloader = new Loader();
        public function loadImage(filepath:String):void {
            imgloader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoad);
            imgloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onImgLoadPr ogress);
            imgloader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,onImageLoadF ailed);
            imgloader.load(new URLRequest(filepath));
        private function onImgLoad(Evt:Event):void {
            var image:Bitmap = Bitmap(Evt.target.content);
            try {
                imgMc.removeChildAt(0);
            } catch (error:Error) {
            imgMc.addChild(image);
            try {
                if (imgObject.URL != undefined) {
                    imgMc.buttonMode = true;
                    imgMc.removeEventListener(MouseEvent.CLICK, onImageClicked);
                    imgMc.addEventListener(MouseEvent.CLICK, onImageClicked);
            } catch (err:Error) {
            dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD"));
        private function onImageClicked(evt:MouseEvent):void {
            trace("Image Attrs:"+imgObject.URL +" Target "+imgObject.Target);
        private function onImgLoadProgress(Evt:ProgressEvent):void {
            if (Evt.bytesLoaded>0) {
                loaded = Math.floor((Evt.bytesLoaded*100)/Evt.bytesTotal);
                dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_PROC",loaded));
        private function onImageLoadFailed(Evt:IOErrorEvent):void {
            trace("Image Loading Failed");
            dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_FAIL"));
Here I am loading some images using the above class in a for loop, like
            for (var i=0; i < 3; i++) {
                var imgLoader:ImageLoader=new ImageLoader();
                imgLoader.addEventListener("CustomEvent.ON_IMGE_LOAD",onImageLoad);
                var target:MovieClip=videolist_mc["list" + mcCount + "_mc"];
                target.list_mc.visible=false;
                var imgObj:Object=new Object;
                imgObj.FilePath=list[i].Thumbnail;
                imgObj.Url=list[i].Url;
                imgObj.Target=list[i].Target;
                target.list_mc.urlObj=new Object ;
                target.list_mc.urlObj=imgObj;
                imgLoader.loadImage(pass the image file's path/name);
                target.list_mc.lable_txt.htmlText="<b>" + list[i].Label + "</b>";
                target.list_mc.imgholder_mc.buttonMode=true;
                target.list_mc.imgholder_mc.addEventListener(MouseEvent.CLICK,onItemPressed);
                mcCount++;

What does "Error 10" mean? "An error occurred while loading your project. 10"

Does anyone know what "Error 10" means? For the first time, I'm getting a message that says, "An error occurred while loading your project. 10". I'm getting this message when I try to open a project that I created yesterday.
I'm using Adobe Premiere 6 on a Windows 7 machine. I have over 20 gigs of open space on the drive with all the project and support files. And this machine with 2 gigs of RAM never has a problem opening other similar Premeire project files with even more still images plugged in.
All of my Premiere project files have always opened with no problem. A similar file that this project file was created from with all the same base elements still opens with no problem.
This file almost finishes the "Loading Project - checking files..." process, but then I get the error message.
I had also saved a duplicate backup file for the project in question and it will not open either, so I believe that rules out a corrupt file... it is only this one project that I created yesterday that will not open. This project file is only about 5.7 megabytes in size.
This file has many still images plugged in to it, but all the same images are plugged in to another base file that still opens correctly.
I've also tried closing all other apps to save memory but I still get the error. I've also tried opening this problem file from within the application and I still get the same error message.
I read some troubleshooting information on the Adobe website about files that give error messages that will not open and it recommended adjusting the size of the virtual memory paging file in the system settings to twice the amount of RAM that is installed instead of being on the automatic setting, so I followed the instruction verbatim and restarted my machine and I still get the error message.
I've also read other troubleshooting info on the Adobe site that recommends to "delete the application preferences file" and "recreate the plugin cache file", but I'm not sure if "Error 10" indicates that those things are the correct procedures to use.
I could re-create this project file, but it has many tricky cutting and motion setting edits that will be difficult to reproduce and it took me a full day to create this project file.
Also, yesterday before initially closing this file, I was able to successfully render a test version to an AVI file and that video file plays fine, but neither the original project file nor the duplicate will open... I'm always getting the "An error occurred while loading your project. 10" after the file almost finishes the "Loading Project - checking files..." process... it almost finishes opening but then I get the error message.
Thanks for any input on this problem. You can see the error message screenshot below.
digi

Thanks Bill... me too.
After writing to Dennis Radeke on an Adobe.com blog about this and getting his very limited response, I wrote to him quoting something I read on the wiki page that you sent me the link to...
Adobe blog:
http://http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html#co mment-2701
Wiki page link that you gave me:
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
Here's what my response today was...
Thanks for your reply DR.
My old version of Premiere 6 works perfectly on Windows 7. I’ve created over a thousand different Premiere project files on this 5 year-old PC that was updated to Windows 7 last year.
All of my other Premiere 6 files open and maintain their original editability and all the features in this ancient version of Premiere work very well.
I own and use mostly Mac machines but I have one 5 year-old PC with a 160 gig hard drive with Windows 7 that I run Premiere 6 on because it’s a thousand dollar program that I had from 10 years ago that I didn’t want to repurchase. Buying a newer PC 5 years ago was far less expensive than buying a new copy of Premiere. Some people seem to think, “Wow, just buy a new version of the software for a thousand dollars and a new computer with a 5 Terabyte hard drive.”, but that isn’t always the reality of some peoples financial situation.
With 20 gigs of open HD space, all of my previous, even more complex Premiere 6 files still open and edit just fine. It is only this one file that I created Thursday that won’t re-open after closing it for the first time. Since the backup copy of that file won’t open either, and all the support files open, play and work in other previous project files, I’m thinking that there is some glitch that happened when saving this file that is corrupting it now, making it unable to be re-opened.
Based on prior advice on multiple topics about Premiere 6 from people on the Adobe forum who use only newer versions of Premiere, most information that applies to the brand new Premiere Pro CS5 still seems to apply to the old Premiere 6.
I found that holding down Shift-Option while opening Premiere 6 trashes the preferences file. This became my work around since I can’t locate the preferences file based on your path noted (in your blog) nor via the other prefs file path published on the Adobe website.
But unfortunately, trashing the prefs file, resetting the plugin cache file, increasing the virtual memory paging file size, importing the problem project file in to a new project, nor anything else is working to allow this file to open.
Now I’m looking in to XML:Wrench to see if that can find the corruption in this file, but I’ve had a malware warning from one download source and the xmlwrench.com website says their download is only a demo version, but no price is listed… this seems somewhat strange and possibly deceptive.
But I read something on an Premiere Pro wiki page , quoted below, at this URL, that seems to be pertinent, and though my version of Premiere may be ancient, it seems that, according to this user’s concerns, Adobe is still having problems with current versions of Adobe software creating corrupt files…
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
QUOTE:
“Can someone please advise – why on EARTH we should have to download XML Wrench and manually fix a corrupt Adobe project??? This is something common to all the Adobe “Support” forums on issues like this, and the many others that plague Adobe’s product (and I’m not being a mindless troll – I’ve been forced to use it for years so I do know the usability and other issues it has): it seems that people are excited because they’ve found a “fix” (which is more like a work-around) – purely because they’re understandably ecstatic that all their hard work isn’t comPLETEly lost.
However, Adobe should be making sure their product isn’t so buggy! This issue should be fixed (as just one example). Adobe should be finding out what causes the corruption in the first place and fixing it. And whether it’s some other codec on the system that’s caused it is no excuse – their software should have better error management built into it. I’ve seen other issues where an Adobe support representative has happily replied: “oh, that’s a known issue since version [3 versions back] – don’t worry, most users are aware of the work around for it: just select and move all of the items in your timeline each time you open the project and you’ll be fine!”
I’m sorry to rant on – but can some other users please explain the above to me? (i.e. why aren’t more people annoyed about this and complaining to Adobe to fix these things).”
UNQUOTE
All of this coming from an experienced user of Adobe products complaining about needing XML:Wrench to fix corrupt Adobe files seems relevant.
In addition, why does no one, including the Adobe knowledge base, have any info about what “An error occurred while loading your project. 10″ means?… why isn’t there a database that identifies Adobe error numbers by the simple number itself? The only info I was able to find identifying “Error 10″ on the Adobe site was a software installation error, not a project loading error.
Now I find myself chasing a clean download of XML:Wrench in order to hopefully fix this corrupt file. Whether I’m using Premiere 6 on a 160 gig hard drive with 20 gigs of open space or Premiere Pro CS5 on a 5 Terabyte hard drive with 3 Terabytes of open space, the problems, according to other users, seem to be the same as ever with corrupt Adobe Premiere files, based on what I’ve been reading across the internet.

How to load multiple CSV files into oracle in one go.

Hi,
I have project requirement like: I'll be getting one csv file as one record for the source table.
So i need to know is there any way by which I can load multiple csv in one go. I have searched a lot on net about external table.(but problem is I can only use one consolidate csv at a time)
and UTL_FILE same thing consolidate file is required here to load.
but in my scenario I'll have (1000+) csv files(as records) for the table and it'd be hectic thing to open each csv file,copy the record in it and paste in other file to make consolidate one.
Please help me ..it's very new thing for me...I have used external table for , one csv file in past but here I have to user many file.
Table description given below.
desc td_region_position
POSITION_KEY             NUMBER     Primary key
POSITION_NAME      VARCHAR2(20)
CHANNEL                     VARCHAR2(20)
LEVEL                     VARCHAR2(20)
IS_PARTNER             CHAR(1)
MARKET_CODE             VARCHAR2(20)
CSV file example:
POSITION_KEY|POSITION_NAME|CHANNEL|LEVEL|IS_PARTNER|MARKET_CODE
123002$$FLSM$$Sales$$Middle$$Y$$MDM2203
delimeter is -- $$my database version as follows:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
"CORE     10.2.0.5.0     Production"
TNS for IBM/AIX RISC System/6000: Version 10.2.0.5.0 - Productio
NLSRTL Version 10.2.0.5.0 - ProductionEdited by: 974253 on Dec 10, 2012 9:58 AM

if your csv files have some mask, say "mask*.csv" or by file "mask1.csv" and "mask2.csv" and ...
you can create this.bat file
FOR %%c in (C:\tmp\loader\mask*.csv) DO (
   c:\oracle\db\dbhome_1\BIN\sqlldr <user>@<sid>l/<password> control=C:\tmp\loader\loader.ctl data=%%c
   )and C:\tmp\loader\loader.ctl is
OPTIONS (ERRORS=0,SKIP=1)
LOAD DATA
APPEND
INTO TABLE scott.td_region_position
FIELDS TERMINATED BY '$$' TRAILING NULLCOLS
( POSITION_KEY,
     POSITION_NAME ,
     CHANNEL,
     LVL,
     IS_PARTNER,
     MARKET_CODE
)test
C:\Documents and Settings\and>sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Mon Dec 10 11:03:47 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: scott
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select * from td_region_position;
no rows selected
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Pr
oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
C:\Documents and Settings\and>cd C:\tmp\loader
C:\tmp\loader>dir
Volume in drive C has no label.
Volume Serial Number is F87F-9154
Directory of C:\tmp\loader
12/10/2012 10:51 AM    <DIR>          .
12/10/2012 10:51 AM    <DIR>          ..
12/10/2012 10:55 AM               226 loader.ctl
12/10/2012 10:38 AM               104 mask1.csv
12/10/2012 10:39 AM               108 mask2.csv
12/10/2012 10:57 AM               151 this.bat
               4 File(s)            589 bytes
               2 Dir(s)   4,523,450,368 bytes free
C:\tmp\loader>this.bat
C:\tmp\loader>FOR %c in (C:\tmp\loader\mask*.csv) DO (c:\oracle\db\dbhome_1\BIN\
sqlldr user@orcl/password control=C:\tmp\loader\loader.ctl data=%c )
C:\tmp\loader>(c:\oracle\db\dbhome_1\BIN\sqlldr user@orcl/password control=C
:\tmp\loader\loader.ctl data=C:\tmp\loader\mask1.csv )
SQL*Loader: Release 11.2.0.1.0 - Production on Mon Dec 10 11:04:27 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Commit point reached - logical record count 1
C:\tmp\loader>(c:\oracle\db\dbhome_1\BIN\sqlldr user@orcl/password control=C
:\tmp\loader\loader.ctl data=C:\tmp\loader\mask2.csv )
SQL*Loader: Release 11.2.0.1.0 - Production on Mon Dec 10 11:04:28 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Commit point reached - logical record count 1
C:\tmp\loader>sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Mon Dec 10 11:04:46 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: scott
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select * from td_region_position;
POSITION_KEY POSITION_NAME        CHANNEL              LVL                  I
MARKET_CODE
      123002 FLSM                 Sales                Middle               Y
MDM2203
      123003 FLSM1                Sa2les               M2iddle              Y
MDM22203
SQL>

Purchase Orders_ Multiple projects not permitted on a single purchase order

Hi Guru
Please assist:
We are using the MM & PS for Purchase Requisition, the Account Assignment N and the buyers created PO with different Network numbers on one Purchase Order,
I want to delete the purchase order and i am getting the message Multiple projects not permitted on a single purchase order
How do i delete this PO, i have tried the delivery complete and final invoice tick its not working
Regards
Susan

The Apple Configurator tool robbed my school of @ 60×4 apps.
Here's my mistake. I bought all the apps needed for the whole school in one lump sum. i.e. 350 copies of Pages. Then happily went to Configurator and loaded the spreadsheet. Installed on all the student iPads. Then need the remaining licenses to gift to the teachers and @ 30 for the cart. NOPE! Once they are loaded in to Configurator you can never get them back. Apple said, “sorry”.
I did this for the iWorks suite, iPhoto, & neu.Annotate before I realized what was happening.
This is what to do, in short. From the VPP account, buy the number needed for exactly what you need, just make sure, it's over 20, even if you only need 11, 20 copies is cheaper than 11 because they are half off at 20 or more. Get the spreadsheet generated by the VPP site for the 20 then buy for the next cart or site, it will generate a new spreadsheet of 20 you can give to the computer and its copy of Configurator.
https://schoolipads.wordpress.com/2013/03/23/vpp-configurator-multiple-carts-or- locations/

Creating & Combining Multiple Projects Query

My IT team has asked me to determine whether I can create and
merge multiple projects to reduce likelihood of "issues" resulting
from use and loading of very large files. Currently, my project is
at 93 MB. I anticipate that it will roughly triple in size within
the next year to year and a half.
I've never had to do this before and I just need a bit of
reassurance that this can be done, easily, without creating a huge
strudel.
I can across two tech notes indicating different approaches
to this challenge: ID: rb_11942 and rb_1940 (
http://www.adobe.com/go/rb_1940).
There will undoubtedly be a large number of cross project
links and a substantial index (when all projects are combined).
I would appreciate any input you might have to offer before I
launch this effort.

Hmmm - how do I put this diplomatically? Let's try this -
would the IT guys accept your guidance on how to configure their
server farm? Nope. So why do they (off the diplomatic path for just
a wee bit) stick their noses into how you do your job? (ok, back
on).
I can only offer my experience here. I have a knowledge base
compiled in WebHelp, for which the project environment is almost a
GB. My compiled Help for our application is produced from an
environment that contains about 133MB.
Given that I have a fairly fiesty laptop, with 2GB RAM and
oodles of disk space, where both projects reside, I have few issues
with working in "large" projects. Both deliverables compile and /
or publish in about 5 minutes or less.
I guess my point is, if it ain't broke, don't make it more
difficult to work with just because an IT guy says so. Skip the
strudel.
(I love my IT guys, by the way - they don't mess around with
what I do, and listen patiently when I tell them what equipment
they should buy - LOL)

How to load a project with Eclipse

Ok, I'm new to eclipse, and I know this may seem like a dumb question, but how do you load a project you've already been working on? I don't see any "open project" menu item to click on in Eclipse, all I see are "new..." everything.

Ithink the problem here may be that you are thinking in Visual Studio while trying to use Eclipse.
In Eclipse, the workspace is a sort of "mini-environment" (for want of a better phrase) in which you develop you application. You can have many projects within each workspace (you are prompted for the workspace when you start Eclipse, so you can have multiple workspaces). Projects are merely directories at the filesystem level).
I would suggest that you simply import all your projects into your workspace and then you can switch between then by clicking on the project - an Eclipse project is not really analogous to a VS project (I think - haven't used VS much and not for some time). The idea is that projects in Eclipse are really application modules

Loading multiple swf's in runtime and playing them one after other

Hi,
I am looking for help in loading multiple swf's as a playlist and playing them one after other on top of the other, so here even we have to play with display list for the visiblity.
Tried to load single files but not getting for multiple files, what will be the event with which the dynamically loaded swf switch to other.These file names will be mentioned in XML file.
Please let me know your thoughts and will be greatfull if anybody can help with the script or any kind of tutorials.

Hi,
First of all am thanking you for showing your kind intrest towards this thread, and appreciate for spending time to work out this issue.
I will explain you in deatil the issue what am facing,I am working on a project where basically dealing with flv player and videos, am trying to play multiple flv videos of a 3d human character who is speaking out a number like 3550.
Here we are using multiple video files and joining them like videos where character says 3 then 1000 then 5 then 50.
The issue here is after every video there is a fraction of second where the character is disappearing from the stage which we can't afford because all the numbers have to be played at once to show it as one single digit.
So thought of trying swf's instead of flv so that we can omit the gap between the numbers, but even in this swf's also having same issue for a fraction of second the character is missing from the stage.
I am looking for a solution to this, either the way can work out as flv or swf.For flv am trying to edit some player where we can remove the delay between the clips.
I am attaching new swf where the character is speaking 3 numbers like 3,1000,40.You can notice there is a flicker between the swf's.
Can we use Display list with which we can omit that gap.
Looking for your thoughts and help.
Thank you

Help with loading multiple images via LoadVars

Hello everybody.
I need a hand loading multiple images using the LoadVars
method with a text file. I can get it to load 1 image but not
anymore than that. I am aware of other methods like using
components but I am looking for a method where I can access and
change all data from 1 text file (there will be text variable text
within the file aswell to, but I am more concerned with the images
at the moment).
Anyway on to the issue. I have created a much simple .fla
file that outlines my problem.
The movie contains 3 layers:
- top layer contains AS
- middle layer contains an empty movie clip with the
instance name of mcImage1
- bottom layer contains an empy movie clip with the instance
name of mcImage2
The AS layer contains the following code:
imagedata = new LoadVars()
imagedata.load("data.txt")
imagedata.onLoad = function(ok){
if(ok){
mcImage1.loadMovie(this.Image1)
mcImage2.loadMovie(this.Image2)
} else trace("Problem Loading")
In the same folder of my .swf file I have a text file called
data.txt which contains the following
&Image1=image1.gif
&Image2=image2.gif
Also in the same folder of my .swf file I have two images
image1.gif and image2.gif.
When I run the flash the image2.gif is imported correctly.
image1.gif does not appear.
You can download my source files and all images here
http://www.myrealpage.com/projects/var_test/var_test.zip
Any help that can be shed on this problem is much
appreciated.
Thanks
Matt

Glad to help. It is just that I see so many folks who have
two different parts of a problem smushed together – each
problem isn't so hard on its own, but together they are difficult
to wrap your head around. Always try and break down each step of
the problem and it will help you in the end.
That being said, I'm not quite so sure on this next problem.
I don't do so much timeline stuff along with the Actionscript. I
can get tricky. So this I don't quite have as much of clear mental
picture of what you are describing. But here are some questions
that I would ask – either of myself if I was doing it or of
you.
Is there a stop() on frame one to wait for the
LoadVars.onLoad? Does the onLoad then say to play?
If not, what happens if we get to Frame 10 before the
LoadVars has even finished? That could be a problem.
Remember that the LoadVars object is an actual object that
will exist until it is deleted or removed in various ways. You can
access it at any time after it is loaded. The onLoad event handler
is just that thing you want to happen immediately after it is
loaded.
So my design would probably be.
LoadVars on Frame 1.
Where I am stopped.
In the onLoad handler load the first image and tell the
timeline to play
On frame 10, the LoadVars object will still exist (unless
you've deleted it)
Get the variable out of the LoadVars and load the image.
If you want to check this. Put a stop() in frame 10 and run
it in the testing environment. When it gets to that frame, go to
the debug menu and List Variables. You should see that your
LoadVars object is still there.
Does that answer your question or am I totally missing the
point?

Best way to save a vi that is used in multiple projects?

Hello,
I have an archive of vi's that I use in multiple projects. As an example, I store all my vi's in a folder called 'Archive'. When I start a new project, I make a new directory, say 'Proj A', and then I drag copies of the original vi's from 'Archive' into 'Proj A'. When I launch Proj A, labview always loads the files from their original location ('Archive') instead of 'Proj A'.
Is there a better or more proper way? I heard LV8.0 may take care of this issue.
Thanks,
Tony.
P.S. I apologize for posting two blank threads a few minutes back. Can't figure out how to delete them.
Message Edited by TonyO on 10-13-2005 02:02 PM

User.lib as mentioned by the others is the way to go if you have no issues reagarding sharing the contents of user.lib across multiple machines. The complications I have seen with this is that if I move an application to my customer's machine and some of the VI's were stored in user.lib the application will not find them unless I thought ahead and pulled out the parts the app needs. I also do not want to give away my entire re-use library everytime I include one of the containded functions.
If you just want to pull out elements from your collection then templates can be of some use.
If you need to selectively pull out parts of your archieve for use when required, then a "Tree.VI" can help. A Tree.VI is a VI that contains all of the top level and dynamixally loaded VI's used by the function to operate correctly. By opening the Tree.VI and doing a "Save with options"... single prompt preserve hiarchy... the requred VI's are copied to the new location and saved with the relative paths adjusted to point at the new location. This takes care of the cross linking issues.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

A Question on the Non-Destructive nature of HD...Multiple Projects from 1?

Hello,
I've been toiling with a sublime but slowish G3 iBook for years. Finally I get into a G4 Aluminum. I've been in iMovie 4 and have found myself very comfortable with it.
But, our school has HD from iLife 06. Slick!
I make home movies each month. And each month's file (Say, March) ends up being in the ballpark of 30 GB. As I make a movie I delete scenes, chop, edit, blend... etc, and when I'm done, I've got a 5 minute movie that's 2 GB in size. Great for archiving on DVD as an iMovie Data.
Then I go back to the external drive, transfer the same March 30 GB file, make another movie from it and wittle it down.
Each movie can have different or similar clips, the point is I end up with about 4 to 5 movies from each month.
I would like to use HD 06 (provided it will work on my G4 867, will it?). I would like to use it, but can't imagine how it would load up my 100GB harddrive. I like to be working on several movies at the same time, provided the Harddrive space allows it.
So now that the reader kind of understands my usage, here is my qwestion... Will iMovie HD allow me to take March's 30 GB file for example, keep it on the harddrive, and make multiple movies from that file. Inotherwords, March resides on the laptop and 5 seperate movies are being created from that same 30 GB file, at the same time....?
Or, would I have to re-transfer March and make another movie from that sepreate file?
I can resign myself from making Data back ups of the iMovie file.... if HD will work in this multiple project from 1 file manner.
Thanks for reading this long question. I'm a teacher and tend to be verbose.
Thanks,
Dave

David,
Each separate movie would need to contain the media used in it.
So when you use the Save As command you essentially create two copies of the same project including all the underlying media.
iMovie HD 6 should run on your G4. You can see full system requirements here:
http://www.apple.com/ilife/systemrequirements.html
Matt

How do I use edge commons composition loader to load multiple compositions with a next and back button?

I am working on an interactive book and have set up each page as a separate composition in edge.
I am using the edge commons JS library to load multiple compositions into a main composition.
You can see how this works here: Edge Commons - Extension Library for Edge Animate and Edge Reflow | EdgeDocks.com
The way the edge commons tutorial is set up requires a button for each composition i want to load. I am interested in loading multiple compositions with a "next" and "back" button, and a "swipe left, "swipe right" gesture on the content symbol that each composition is loaded into. I also need the swipe features on the content symbol not to interfere with the interactive elements on the loaded composition.
Please suggest a solution that will work without adding additional scripts beyond edge commons and jquery.

Sort of. I'm using this code inside an action for a button symbol. But it doesn't work perfectly. Trying to debug it.
Let me know if you have any luck.
//Check to see if pageCounter already exists
if (typeof EC.pageCounter === 'undefined') {
// it doesn't exist so initialize it to first page
EC.pageCounter = 2;
//check if the page is only 1 digit -- patch for single digit
if (EC.pageCounter < 9) {
// it is, so we need to pad a 0 on the front.
EC.pageCounterString = "0" + EC.pageCounter;
//e.g. 01 ...09,11,12,13....115,222352,,....
else {
EC.pageCounterString = EC.pageCounter;
EC.loadComposition(EC.pageCounterString + "/publish/web/" + EC.pageCounterString + ".html", sym.$("container"));
EC.pageCounter = EC.pageCounter + 1;
//TODO for back -1

Loading multiple projects

Similar Messages

Maybe you are looking for