LOB Appx Deployment issue with Configuration Manager 0x80073CF9

Hi,
trying to deploy a ModernUI LOB App with Config Manager 2012. After downloading the content to ccmcache, installation starts and ends up with error message 0x80073CF9.
AppDiscovery.log:
Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5" AND Revision = 1)"
AppDiscovery 23.04.2015 14:01:11
6148 (0x1804)
Performing detection of app deployment type SicherUndWeg.Windows - Windows app package (*.appx, *.appxbundle)(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5, revision 1) for user.
AppDiscovery 23.04.2015 14:01:11
6148 (0x1804)
Working with Package: 0bbc1bc5-a8eb-4bc0-9fbe-2a6141b7c835_2015.416.1305.4090_neutral_~_vv150cwvqh76c
AppDiscovery 23.04.2015 14:01:11
6148 (0x1804)
+++ Application NOT Discovered [AppDT Id: ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5, Revision: 1]
AppDiscovery 23.04.2015 14:01:12
6148 (0x1804)
+++ Did not detect app deployment type SicherUndWeg.Windows - Windows app package (*.appx, *.appxbundle)(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5, revision 1) for S-1-5-21-2924055433-2284826678-407803137-85917.
AppDiscovery 23.04.2015 14:01:12
6148 (0x1804)
ActionType - Install will use Content Id: Content_c458dc52-e321-40be-ab2f-a4599c387c7b + Content Version: 1 for AppDT "SicherUndWeg.Windows - Windows app package (*.appx, *.appxbundle)" [ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5],
Revision - 1 AppDiscovery
23.04.2015 14:01:13 6148 (0x1804)
ActionType - Install will use Content Id: Content_c458dc52-e321-40be-ab2f-a4599c387c7b + Content Version: 1 for AppDT "SicherUndWeg.Windows - Windows app package (*.appx, *.appxbundle)" [ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5],
Revision - 1 AppDiscovery
23.04.2015 14:01:13 6148 (0x1804)
Method EnforceApp failed with error 80073CF9
AppDiscovery 23.04.2015 14:01:15
6148 (0x1804)
CAppProvider::ExecMethodAsync failed. Error 80073cf9
AppDiscovery 23.04.2015 14:01:15
6148 (0x1804)
CITaskMgr.log
Initiating task ContentDownload for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1 (SicherUndWeg.Windows - Windows app package (*.appx, *.appxbundle)) for target: S-1-5-21-2924055433-2284826678-407803137-85917,
consumer: {9C03F93F-11ED-4E9A-B3C0-C2CB8F056002}
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
Initiating content download : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.ContentDownload)
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
Contents already available. CITaskMgr
23.04.2015 14:01:13 6940 (0x1B1C)
Contents download already in Success state : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.ContentDownload)
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
State transition to (Success), Param(0) : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.ContentDownload)
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
State transition to (Success), Param(0) : CTaskConsumer(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.{3C50E03E-1849-4371-820E-695BD2986F91})
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
Already completed state (Success) : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.ContentDownload)
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
Release task ContentDownload for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1 for target: S-1-5-21-2924055433-2284826678-407803137-85917, consumer {9C03F93F-11ED-4E9A-B3C0-C2CB8F056002}
CITaskMgr 23.04.2015 14:01:13
6616 (0x19D8)
Release task ContentDownload for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/Application_0e314ec1-b991-4c77-a980-58183b18d83f.1 for target: S-1-5-21-2924055433-2284826678-407803137-85917, consumer {A542B598-30EC-4690-A462-4EA1958EA7C6}
CITaskMgr 23.04.2015 14:01:13
6616 (0x19D8)
Release task ContentDownload for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/RequiredApplication_0e314ec1-b991-4c77-a980-58183b18d83f.1 for target: S-1-5-21-2924055433-2284826678-407803137-85917, consumer {F0354997-44B3-428F-9F46-2D7FF9EE5933}
CITaskMgr 23.04.2015 14:01:13
6616 (0x19D8)
Initiating task Enforce for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1 (SicherUndWeg.Windows - Windows app package (*.appx, *.appxbundle)) for target: S-1-5-21-2924055433-2284826678-407803137-85917,
consumer: {0FC6DA00-8B41-458A-BDF2-130128CAFF57}
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
Submitted new MTC request 0a4ea4a5-a0b6-4c41-95a4-0f89861f545f
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
State transition to (WaitSerialize), Param(0) : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.Enforce)
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
State transition to (WaitSerialize), Param(0) : CTaskConsumer(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.{3C50E03E-1849-4371-820E-695BD2986F91})
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
Sending ack to MTC for task 0a4ea4a5-a0b6-4c41-95a4-0f89861f545f
CITaskMgr 23.04.2015 14:01:13
6604 (0x19CC)
Starting Enforcement : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.Enforce)
CITaskMgr 23.04.2015 14:01:13
6604 (0x19CC)
Initiated application enforcement. : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.Enforce)
CITaskMgr 23.04.2015 14:01:13
6604 (0x19CC)
State transition to (InProgress), Param(0) : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.Enforce)
CITaskMgr 23.04.2015 14:01:13
6604 (0x19CC)
State transition to (InProgress), Param(0) : CTaskConsumer(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.{3C50E03E-1849-4371-820E-695BD2986F91})
CITaskMgr 23.04.2015 14:01:13
6604 (0x19CC)
Application enforcement completed : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.Enforce)
CITaskMgr 23.04.2015 14:01:15
9060 (0x2364)
Enforcement completion state Failure : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.Enforce)
CITaskMgr 23.04.2015 14:01:15
9060 (0x2364)
State transition to (Failure), Error(0x80073cf9) : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.Enforce)
CITaskMgr 23.04.2015 14:01:15
9060 (0x2364)
State transition to (Failure), Param(-2147009287) : CTaskConsumer(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.{3C50E03E-1849-4371-820E-695BD2986F91})
CITaskMgr 23.04.2015 14:01:15
9060 (0x2364)
Active enforcement task with MTC Id 0a4ea4a5-a0b6-4c41-95a4-0f89861f545f not found
CITaskMgr 23.04.2015 14:01:15
5632 (0x1600)
Release task Enforce for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1 for target: S-1-5-21-2924055433-2284826678-407803137-85917, consumer {0FC6DA00-8B41-458A-BDF2-130128CAFF57}
CITaskMgr 23.04.2015 14:01:15
2972 (0x0B9C)
Release task Enforce for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/Application_0e314ec1-b991-4c77-a980-58183b18d83f.1 for target: S-1-5-21-2924055433-2284826678-407803137-85917, consumer {550FED48-B73A-4CDA-9CCD-895F4A39BE60}
CITaskMgr 23.04.2015 14:01:15
2972 (0x0B9C)
Release task Enforce for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/RequiredApplication_0e314ec1-b991-4c77-a980-58183b18d83f.1 for target: S-1-5-21-2924055433-2284826678-407803137-85917, consumer {C47690C7-AD25-496D-9880-96439013C199}
CITaskMgr 23.04.2015 14:01:15
2972 (0x0B9C)
Any Ideas?

Are you using Windows 8 Enterprise? If so, did you configure the AllowAllTrustedApps
key?
For more information see:
http://blogs.technet.com/b/ryanan/archive/2014/05/16/sideloading-windows-8-appx-applications-via-configmgr.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

Issues with Configuration Manager

Hi,
I have recently installed Peoplesoft on my windows laptop. But when I created a different Windows User on the same laptop my configuration manager doesn't take any configuration values. Looks like its not even saving the profile even when I do an Import.
I have given the Windows Administrator access to the new user, created PS_HOME, ORACLE_HOME,ORACLE_SID (all path variables in the new user profile) .
I have also tried pscfg -clean and tried reinstalling the configuration manager but nothing works.
Did anyone face similar problem before? Any help is really appreciated.
Thanks,
MK
Edited by: user13348341 on Oct 11, 2010 7:35 AM

I remember having a similar problem like this before. Even though i gave the user admin rights to the machine it still gave me problems. Not sure how admin rights work but it's not full rights as expected for whatever reason. I think I used the "Run As" option in the end to get round the problem. If you right mouse click on the menu item, one of the options should be "Run As". Run config manager as Administrator and see if that works.

MDT integrated with Configuration manager

Hi Team,
Just wondering if it is suggested not to open or use MDT console workbench once its been integrated with configuration manager?
I been using it for a while and never faced any issues. I believe it should be fine to use the MDT and configuration manager both even after they been integrated. I generally use MDT workbench for building image and then use Configuration
manager MDT based TS to deploy it. I don't see any technical risk. Any advice\best practice? Thanks.
Regards,

There should be no problem opening up the MDT console on a machine with ConfigMgr installed, they are separate programs.
Keith Garner - keithga.wordpress.com

Issue with configuring Hyperion HUB 7.1.2 with SQLSERVER 2005

Hello Experts,
One of my customer has an issue with configuring Hyperion HUB 7.1.2 with SQLSERVER 2005.
"We are trying to configure the SQL server 2005 database with Hyperion hub and we are unable to get the cofiguration completed. We suspect the driver class (hyperion.jdbc.sqlserver.SQLServerDriver) used in the domain.xml (path \Hyperion\HyperionHub\7.2.1\deployments\Tomcat\4.1.30\) is not helping to connect with sql server 2005. We would appreciate if you can provide new driver class which we can included while deploying the app under the web server."
Please suggest. Thanks in advance
Regards,
Sonu

Hi
Please redeploy only the Web Server under shared service. It has to be redeployed once EPMA and others are configured.
Thanks
Rupak
Mantra to Win | WinMantras.com | http://hyperion.winmantras.com

Issues with Messaging Manager in ATG 10

Hi,
We are facing an issue with messaging manager. In weblogic we have configured datasource as 'coreDataSource', somehow MessagingManager is looking for coreDataSource_shop and throwing error that Datasource is not available?
How to resolve this? I am using ATG 10.3 and Weblogic 10.3.5.
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager     limbo : error querying for messages     CONTAINER:atg.repository.RepositoryException; SOURCE:java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_RMFAIL start() failed on resource 'coreDataSource_shop': XAER_RMFAIL : Resource manager is unavailable
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager     oracle.jdbc.xa.OracleXAException
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1110)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:240)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.jdbc.wrapper.VendorXAResource.start(VendorXAResource.java:50)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.jdbc.jta.DataSource.start(DataSource.java:729)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1231)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1164)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:285)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:522)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:449)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1599)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1503)
Thanks
Gopi

still the issue is exist.
At one point of time, Database is not able to provide connection for coreDataSource. After that shop is trying to get connection from JNDI coreDataSource_shop, which is not available in weblogic.

Streamlined Client Management and VDI with Configuration Manager 2012

Hi,
There is an interesting blog about managing ConfigMgr 2012 Clients in a VDI environment.
http://blogs.technet.com/b/server-cloud/archive/2011/11/15/streamlined-client-management-and-vdi-with-configuration-manager-2012.aspx
But I didn't find any way or description in the blog on how to prepare the client in the base image used for VDI. Do we still have to make the client unique before shutting down the base image? Or will this be done automatically?
Are these new attributes (IsVirtual, IsMachineChangesPersistent ...) enabled by default?
Thanks!
Gr. Cédric.

No this is handled by ConfigMgr post SP1
Are these new attributes (IsVirtual, IsMachineChangesPersistent ...) enabled by default?
For XenDesktop -no you will need to enable them in the client settings (not sure for other virtual
solutions)
In the SCCM Console go to the Administration workspace; click Client Settings. Right click the Default Client Settings and choose Properties
Choose Hardware Inventory and click Set Classes.
Click the Add button and then click Connect.
Enter the computer name of a master image device that has the SCCM client installed.
Enter root\ccmvdi as the WMI namespace and click Connect.
Select CCM_DesktopMachine. Click Ok.
Cheers
Paul | sccmentor.wordpress.com

Having issues with profile manager on 10.9 loosing users/device assignments.

I'm having issues with profile manager on 10.9 loosing users/device assignments. Luckly I only have arround 70 devices added so far. The first time it happened I thought it was just a freak thing, but it has just happened again. What I find weird is nothing on the server was changed, no devices added. So when this happens my users phones lose access to email, because I'm using variables, which rely on the user being assigned to the device. Anyone know how to fix this, and if not. Does anyone know how to backup and restore just profile manager in 10.9. Thanks.

I enabled all users in my AD "Domain Users" group access to "Profile Manager". I had also initially enabled "Profile Manager" access for a few individual users. Those users did not loss the device assignments. I'm not absolutely sure why/if allowing access for a group is causing this issue. Enabling access for each person would be very time consuming.... Maybe adding access to the individual users is importing that user into OD?

Issues With Football Manager Live

Over the last few days I have had issues with Football Manager Live for which I have played for a year with no issues. At around 7 pm the game just died, yet I have no trouble playing any other online games that require more bandwidth. I read the FML forums and there are lots of people saying they have the same issues with BT. Can anyone please provide a solution? Many thanks

Hi James,
Thanks for the post and welcome to the forum.
Have you been able to play Football Manager online again? There could be a number of reasons for the game drop out but I think broadband speed would be a good place to start.
Please run a speed test via www.speedtester.bt.com and post your results here, this will give us a clear picture of how your connection is running and if there are any issues. At the very least we can rule out broadband speed being the cause.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

CS6 deployment error with Application Manager Enterprise 3.1 Edition

Hello everyone,
I am currently trying to create a DesignWebPremium and Master Collection CS6 deployment package with AMEE 3.1 (Application Manager Enterprise Edition) on Windows 7 EE x64 without any luck.
I keep getting the following error log:
11/16/2012 06:35:51[INFO] AdobePackageBuilder - Build Version - 3.1.105.0
11/16/2012 06:35:51[INFO] AdobePackageBuilder - Logging Level verbosity Set to 4
11/16/2012 06:35:55 [INFO] AdobePackageBuilder - Successfully retrieved TargetName from OptionXML.
11/16/2012 06:35:57 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
11/16/2012 06:35:59 [INFO] AdobePackageBuilder - Copying the content of 1 disk
11/16/2012 06:37:31 [ERROR] AdobePackageBuilder - Failed to create Setup.ini file for Acrobat Customized Wizard.
11/16/2012 06:37:32 [ERROR] AdobePackageBuilder - Failed to create the zip file.
11/16/2012 06:37:32 [ERROR] AdobePackageBuilder - Error zipping PkgConfig.xml.
so I thought I could be smart and just take out Acrobat from the install package, but still no luck:
11/15/2012 07:39:41[INFO] AdobePackageBuilder - Build Version - 3.1.105.0
11/15/2012 07:39:41[INFO] AdobePackageBuilder - Logging Level verbosity Set to 4
11/15/2012 07:39:46 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
11/15/2012 07:39:48 [INFO] AdobePackageBuilder - Copying the content of 1 disk
11/15/2012 07:42:10 [ERROR] AdobePackageBuilder - Failed to create the zip file.
11/15/2012 07:42:10 [ERROR] AdobePackageBuilder - Error zipping PkgConfig.xml.
I have tried creating the deployment package as both 32-Bit, 64-Bit, including updates and not including them, running AMEE 3.1 with administrative access and without - it just doesn't work...
I'll be grateful for any constructive help.

Hi,
I just did come across this error today, and thought of sharing with the solution. This error is due to insufficient previlages of user, while he is trying to configure the hyperion Products. So all you have to do to solve this is, while you try to configure, right click on the configuration utility and run as administrator, and do the configuration as usual.This would solve this issue. I did not have this issue with Windows 2003 Server, but faced this while installing on Windows 2008 Server.
Thanks,
Leo Jose.

Deployment issue with Planning & EPMA 11.1.2.0

Hi
I installed the following applications of Hyperion suite:
Essbase
EPMA
CalcManager
Planning
During configuring i configured each product separately since i wanted to configure separate DB for each of them.
The configuration went with no issues. But now when i log-in into workspace and go to Navigate, i only see administer.
There is no option for EPMA and Planning applications.
Did i miss any step?
I have used IIS as my webserver because Oracle HTTP gave me some error while deploying (unable to initiate OPMN). Is it some issue with IIS
I ahve installed my applications on Win XP SP3, IIS 5.1 and its a 32bit machine

Did you reconfigure the web server after you finished configuring all of the products?

Deployment issue with EPMA & Planning in 11.1.2

Hi
I installed the following applications of Hyperion suite:
Essbase
EPMA
CalcManager
Planning
During configuring i configured each product separately since i wanted to configure separate DB for each of them.
The configuration went with no issues. But now when i log-in into workspace and go to Navigate, i only see administer.
There is no option for EPMA and Planning applications.
Did i miss any step?
I have used IIS as my webserver because Oracle HTTP gave me some error while deploying (unable to initiate OPMN). Is it some issue with IIS
I have installed my applications on Win XP SP3, IIS 5.1 and its a 32bit machine

Hi
Please redeploy only the Web Server under shared service. It has to be redeployed once EPMA and others are configured.
Thanks
Rupak
Mantra to Win | WinMantras.com | http://hyperion.winmantras.com

Issue with Power management MSI Gforce GTX 770

Hello,
I contact you since I have bought one month ago a GForce GTX 770
I do not have the serial Number but could havez a look at it quickly if needed
I have since the beginning recurrent issues with the graphic cards and require support.
System Windows 7 64 bits
Last official Pilots up to date 335.23
I also tryed the provided drivers 331.21 (9.18.13.3182 more precisely)
Issue
When the graphic cards is reauired high demands (in case of high GPU demand for games) the nvidia driver is crashing (nvlddmkm.sys). Sometimes windows recovers, sometimes not, the system is fully dead and only windows restore function could help restarting the system and restore stable driver set.
Quote
Nom du journal :System
Source : nvlddmkm
Date : 17[SLASH]05[SLASH]2014 14:50:50
ID de l’événement :14
Catégorie de la tâche :Aucun
Niveau : Erreur
Mots clés : Classique
Utilisateur : N[SLASH]A
Ordinateur : Fabien-PC
Description :
La description de l’ID d’événement 14 dans la source nvlddmkm est introuvable. Le composant qui a déclenché cet événement n’est pas installé sur l’ordinateur local ou l’installation est endommagée. Vous pouvez installer ou réparer le composant sur l’ordinateur local.
Si l’événement provient d’un autre ordinateur, les informations d’affichage doivent être enregistrées avec l’événement.
Les informations suivantes étaient incluses avec l’événement :
[BSLASH]Device[BSLASH]Video7
CMDre 00000000 00000474 ff1fe205 00000007 00000000
XML de l’événement :
[XMLIN]Event xmlns="..."[XMLOUT]
[XMLIN]System[XMLOUT]
[XMLIN]Provider Name="nvlddmkm" [SLASH][XMLOUT]
[XMLIN]EventID Qualifiers="49322"[XMLOUT]14[XMLIN][SLASH]EventID[XMLOUT]
[XMLIN]Level[XMLOUT]2[XMLIN][SLASH]Level[XMLOUT]
[XMLIN]Task[XMLOUT]0[XMLIN][SLASH]Task[XMLOUT]
[XMLIN]Keywords[XMLOUT]0x80000000000000[XMLIN][SLASH]Keywords[XMLOUT]
[XMLIN]TimeCreated SystemTime="2014-05-17T12:50:50.254312800Z" [SLASH][XMLOUT]
[XMLIN]EventRecordID[XMLOUT]3277[XMLIN][SLASH]EventRecordID[XMLOUT]
[XMLIN]Channel[XMLOUT]System[XMLIN][SLASH]Channel[XMLOUT]
[XMLIN]Computer[XMLOUT]Fabien-PC[XMLIN][SLASH]Computer[XMLOUT]
[XMLIN]Security [SLASH][XMLOUT]
[XMLIN][SLASH]System[XMLOUT]
[XMLIN]EventData[XMLOUT]
[XMLIN]Data[XMLOUT][BSLASH]Device[BSLASH]Video7[XMLIN][SLASH]Data[XMLOUT]
[XMLIN]Data[XMLOUT]CMDre 00000000 00000474 ff1fe205 00000007 00000000[XMLIN][SLASH]Data[XMLOUT]
[XMLIN]Binary[XMLOUT]0000000002003000000000000E00AAC00000000 000000000000000000000000000000000000000 00[XMLIN][SLASH]Binary[XMLOUT]
[XMLIN][SLASH]EventData[XMLOUT]
[XMLIN][SLASH]Event[XMLOUT]
Sorry for the replacements of XML and slashes stuff but it can t validate and can't validate either the code tag...
Result
Impossible to play games such as Diablo 3 Reaper of Souls without having a crash every 5-15 min...
Impossible to run 3Dmark tests until the end. It somehow crashes sooner or later.
In low charge the driver never crash.
Tests I did
Based on this new computer (everything is new into it)
- Power supply seems to be the cause, thus i tested a more powerful one (520w to 700w) same result
- i changed the card of PCI express plug on the mother board which did not do anything
- I reinstalled fully win 7 and did the minimum installs such as antivirus and graphic drivers from nvidia. same result
- I updated Power supply windows settings to high performance in order to disable auto adaptative voltage from the system. same result
- I updated as well power supply nvidia option to best performances which did not solved the issue as well.
Tests I did not do, since they are intrusive
Update the Bios ? did not know if you have a more recent one
My bios version is NV282MS.3A0
Downclock the graphic card
I will soon extract the card to put it in another computer to validate that this the card[SLASH]pilot that is having issue:
What should I do to have a clear evidence of the issue which could be either the card itself, of the bios which does not manage properly the power consumption ?? How can I send you useful logs ? Is there is a diagnostic tool to provide you with better data to dig in ?
I am stucked and unable to use properly this nez configuration ...
Thanks in advance for your help
best regards
Fabien

Okay, some more hints to graphic Card issue ...
- Tested qnd Confirmed with another Games GTA4 Same Crash
- Board Bios already up to date.
- GTX770 has been put into an old computer, and the new one got a HD5850
Comparison of confs (changes in bold)
New Computer
Board: MSI B85-G43 Gaming
Bios: Version 1.0
VGA: Radeon HD5850
PSU: Antec 520W
Intel Core i5 Quad 4570K (Haswell) 3.20GHz [C0] Family 6 Model 60 (3C) Stepping 3 Revision 17
MEM: Corsair Vengeance 2x4gb
HDD: 1To SSHD
COOLER: Corsair CWC-9060007-WW Water Cooler
OC: No
OS: Windows 7 x64 Ultimate V6.01 Build 7601 Service Pack 1
Old Coputer
VGA: MSI GeForce GTX 770 BIOS NV282MS.3A0 80.04.e6.00.1e
N770 TF 2GD5/OC sn 602-V282-41SC14-02009565
PSU: Cooler Master 700W Silent Pro
Intel Core 2 Duo @2Ghz
MEM: Corsair 4x1gb
HDD: 500Go
OC: No
OS: Windows 7 x86 Ultimate V6.1 Build 7600
Note that both GTX770 tests have been done with same provided MSI drivers
Result
1 Old Computer with GTX770
Crash reproduced after a full 3D Mark
My idea is that the computer itself is old and do not ask so much the GPU to work. Hard to reach the full power requirement. It has also a small 1280x1024 screen. But problem finally reproduced... so Issue lies in the Graphic Card
2 New computer with old Radeon
3D Mark fully launched multiple time without any crash
Another hint saying Graphic Card has issue.
Now a few questions :
- Does the NVidia Bios flash changes the guarantee on it ? I mean the CG is new, I do not want to lose the guarantee.
Thanks a lot for your time.
Best regards

OSD with Configuration Manager Clients and PKI certifications

My team and I had just set up PKI Certs on our System Center 2012 R2 Server. We want the opportunity to utilize Out Of Band Management, but we also would like to make our OSD available to the following "Only Configuration Manager Clients." I have
done some testing and have found that without PKI enabled we have been able to use this feature. Once we enabled PKI we could only perform OSD through PXE or Boot Media.
Is there a way to have PKI enabled but also allow OSD's to be available through "Only Configuration Manager Clients"?

Thanks for the reply, I will relay the info concerning OOB. It is not necessarily a technical problem we are running into, more of an inconvenience. OSD works great as long as you make your TS deployment available through Boot media or PXE. Our end goal
is to create a zero touch environment. To do this I was thinking of making the TS available only configuration manager clients. With PKI I loose that capability and it forces me to use boot media or PXE.
Is there a way to have PKI enabled and still be able to deploy TS with only configuration manager clients, and no other deployment method?
Thank you again.

System Center - Service Manager Connecting with Configuration Manager

Hi,
I have System Center 2012 R2 - Service Manager and Configuration Manager (CM) installed, and i have created a connector from Service Manager (SM) to CM which imports data from CM. the question that i have is that is there two way communication
of the data between SM and CM.
Second question that i have is if i have created some change request in the SM, will it show up in the CM as what needs to be completed.
Thanks

wow, that's a big question.
Service Manager is a representational object database. there are objects in the database that represent objects in your environment. Most things in service manager are either Work Items (incident, change request, service request, etc) or config items (servers,
databases, software, users, domains, printers, locations, budget centers, purchase orders, workstations, hard drives, network cards, switches, business services, etc). there are a few other classifications, but for now, lets just deal with those two.
there are also relationships between those objects, showing how those objects interconnect. For instance, say i report a problem. in the database, the user config item object that represents me is related to the incident work item object that represents
my issue by the relationship System.WorkItemAffectedUser, Affected User.
the advantage of this approach is twofold: first, the Affect user on an incident isn't just a text field, it's actually the full object that represents me. so you can click on me and see everything about me that the system knows, and follow other relationships
to see my manager, etc. Second, because everything is related to the full object, i don't need to duplicate any info on the incident, just reference the related object.
So to address your first question, it does everything your IT environment does, assuming you tell it about it.
to your second question, it has whatever information you tell it. Here is where Connectors come into play. the AD connectors can get you Users, Computers, Printers, etc. the Config Manager connector will get you detailed systems info, hardware, and
software (if you have Asset Intelligence turned on). the Ops Manager will get you a lot more info about the systems, Service Maps, health state, etc. And then there's
Provance makes a lot of money selling the DMP to let Orgs import data from vendors. not to mention their Asset lifecycle stuff, or Cireson's for that matter.
TL;DR - a lot.

T430s Issues with Power Manager

Just to note, I don't have the big issue with the DCC and FCC not matching up that seems to be plaguing many of the T430s users. I do have a Panasonic battery, FYI.
So I got my T430s late August and for the past few weeks, I've been noticing that I lose about 1% of battery a day even though it is plugged into AC.
I also have a problem with the laptop not going into non-AC mode when I pull the adaptor out of the socket. It remains on AC mode, which drains the battery more than it should be. I have to physically go into the power manager and change it to a power saving mode for it to change down. This doesnt happen all the time but it does happen quite frequently. My default power setting is default "Power source optimized"
My Power Manager firmware is 6.36 (I think this is the latest one)
Anyone else having these issues? Any firmware upgrades that should fix this problem?

'afternoon...
Welcome to the community.
Not sure if it will help out, but please check to be sure you also have the latest Power Management driver installed. You can find it in your driver matrix. I don't have the link immediately at hand or I would post it.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

LOB Appx Deployment issue with Configuration Manager 0x80073CF9

Similar Messages

Maybe you are looking for