Local client copy cancelled

hi experts
i installed ECC-6.0 with oracle10.2.0.1.after installation i applied all patches (basis-14,abap-14,bw-16,appl-12fin_basis12)then i scheduled client copy 000 to 101 some time it was canceled the corresponding log is 
Client copy from 29.10.2008 11:39:54
System ID............................ KDV
Target client........................ 101
R/3 Release.......................... 700
  Basis Support Package...............SAPKB70014
Host................................. KARVY-DEV
Start in background............. .....X
User................................. SAP*
Parameter
Source client........................ 000
Source client user masters............000
Copier profile:.......................SAP_ALL
Table selection
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Test mode (without database update).. R
Start analysis of system 11:39:54
/GC1/CC_EXIT_CLIENT_DELETION executed         0(        0) entries copied
Exit program /GC1/CC_EXIT_CLIENT_DELETION successfully executed 11:40:09
Start of exit /SAPCND/CC_COND_TABLE_MATCH
/SAPCND/CC_COND_TABLE_MATCH executed         0(        0) entries copied
Exit program /SAPCND/CC_COND_TABLE_MATCH successfully executed 11:40:10
Client Copy called in Test mode -> Return.
/SAPCND/CC_GROUP_WS_AA executed         0(        0) entries copied
Exit program /SAPCND/CC_GROUP_WS_AA successfully executed 11:40:10
Start of exit /SAPCND/CC_INCLUDE_TABLES
End of exit /SAPCND/CC_INCLUDE_TABLES
/SAPCND/CC_INCLUDE_TABLES executed       108(        0) entries copied
Exit program /SAPCND/CC_INCLUDE_TABLES successfully executed 11:40:11
ADDR_CLIENTCOPY_SELECT_TABLES executed        26(        0) entries copied
Exit program ADDR_CLIENTCOPY_SELECT_TABLES successfully executed 11:40:12
EFG_FORM_CC_EXIT_BEFORE executed         0(        0) entries copied
Exit program EFG_FORM_CC_EXIT_BEFORE successfully executed 11:40:13
Start of deletion methods for client 101
Table K9RKI48050002 is deleted, not copied
Table K9RKI48050003 is deleted, not copied
Table KX9RABA0000108 is deleted, not copied
Table TABADRH is deleted, not copied
Table TABADRS is deleted, not copied
Table TABADRSF is deleted, not copied
Table TABADRST is deleted, not copied
Table TABADRX is deleted, not copied
Table UCF001C is deleted, not copied
Table UCF001G is deleted, not copied
Table UCF001T is deleted, not copied
Table UCF0020 is deleted, not copied
Table UCF0021 is deleted, not copied
Table UCF0022 is deleted, not copied
Table UCF0023 is deleted, not copied
Table UCF002C is deleted, not copied
Table UCF002T is deleted, not copied
Table UCF0032 is deleted, not copied
Table UCF003C is deleted, not copied
Table UCF003G is deleted, not copied
Table UCF003T is deleted, not copied
Table UCF0040 is deleted, not copied
Table UCF0041 is deleted, not copied
Table UCF0042 is deleted, not copied
Table UCF0043 is deleted, not copied
Table UCF004C is deleted, not copied
Table UCF004T is deleted, not copied
Table UCF1000 is deleted, not copied
Table UCF1001 is deleted, not copied
Table UCF1002 is deleted, not copied
Table UCF2300 is deleted, not copied
Table UCF2301 is deleted, not copied
Table UCF2310 is deleted, not copied
Table UCF2311 is deleted, not copied
Table UCF3000 is deleted, not copied
Table UCF3001 is deleted, not copied
Table UCF3010 is deleted, not copied
Table UCF4000 is deleted, not copied
Table UCF4001 is deleted, not copied
Table UCF4002 is deleted, not copied
Table UCF5000 is deleted, not copied
Table UCF5001 is deleted, not copied
Table UCF5002 is deleted, not copied
Table UCF5010 is deleted, not copied
Table UCF600C is deleted, not copied
Table UCF6010 is deleted, not copied
Table UCF6020 is deleted, not copied
Table UCF6030 is deleted, not copied
Table UCF6050 is deleted, not copied
Table UCF6100 is deleted, not copied
Table UCF6110 is deleted, not copied
Table UCF6120 is deleted, not copied
Table UCF6130 is deleted, not copied
Table UCF6140 is deleted, not copied
Table UCF6150 is deleted, not copied
Table UCF6160 is deleted, not copied
Table UCF6170 is deleted, not copied
Table UCF6180 is deleted, not copied
Table UCF6200 is deleted, not copied
Table UCF620C is deleted, not copied
Table UCF620T is deleted, not copied
Table UCF6210 is deleted, not copied
Table UCF6300 is deleted, not copied
Table UCF6310 is deleted, not copied
Table UCF7100 is deleted, not copied
Table UCF7101 is deleted, not copied
Table UCF7102 is deleted, not copied
Table UCF7110 is deleted, not copied
Table UCF7300 is deleted, not copied
Table UCF7400 is deleted, not copied
Table UCF7410 is deleted, not copied
Table UCF7500 is deleted, not copied
Table UCF900C is deleted, not copied
Table UCF9010 is deleted, not copied
Table UCFE01T is deleted, not copied
Table UCFE020 is deleted, not copied
Table UCFE02T is deleted, not copied
Table UCFE03G is deleted, not copied
Table UCFE03T is deleted, not copied
Table UCFE04G is deleted, not copied
Table UCFE04T is deleted, not copied
Table UCFE050 is deleted, not copied
Table UCFE05G is deleted, not copied
Table UCFE05T is deleted, not copied
Table UCFE060 is deleted, not copied
Table UCFE06G is deleted, not copied
Table UCFE06T is deleted, not copied
Table UCFE070 is deleted, not copied
Table UCFE080 is deleted, not copied
Table UCFE081 is deleted, not copied
Table UCFI00C is deleted, not copied
Table UCFI10T is deleted, not copied
Table UCFI200 is deleted, not copied
Table UCFI210 is deleted, not copied
Table UCFT000 is deleted, not copied
Table UCFT001 is deleted, not copied
Table UCFT002 is deleted, not copied
Table UCFV000 is deleted, not copied
Table UCFV200 is deleted, not copied
Table UCFV201 is deleted, not copied
Table UCFV202 is deleted, not copied
Table UCFV20G is deleted, not copied
Table UCFV21G is deleted, not copied
Table UCFV21T is deleted, not copied
Table UCFV220 is deleted, not copied
Table UCFV22T is deleted, not copied
Table UCI1101 is deleted, not copied
Table UCI1201 is deleted, not copied
Table UCI2100 is deleted, not copied
Table UCL2011 is deleted, not copied
Table UCL201G is deleted, not copied
Table UCL201T is deleted, not copied
Table UCM0010 is deleted, not copied
Table UCM0011 is deleted, not copied
Table UCM0012 is deleted, not copied
Table UCM0013 is deleted, not copied
Table UCM0014 is deleted, not copied
Table UCM0015 is deleted, not copied
Table UCM0016 is deleted, not copied
Table UCM001T is deleted, not copied
Table UCM002C is deleted, not copied
Table UCM002T is deleted, not copied
Table UCM0030 is deleted, not copied
Table UCM0031 is deleted, not copied
Table UCM0032 is deleted, not copied
Table UCM0033 is deleted, not copied
Table UCM003C is deleted, not copied
Table UCM003T is deleted, not copied
Table UCM1000 is deleted, not copied
Table UCM1001 is deleted, not copied
Table UCM100G is deleted, not copied
Table UCM100T is deleted, not copied
Table UCM600C is deleted, not copied
Table UCM600T is deleted, not copied
Table UCMA100 is deleted, not copied
Table UCMA101 is deleted, not copied
Table UCMA10C is deleted, not copied
Table UCMA10T is deleted, not copied
Table UCMI100 is deleted, not copied
Table UCMI10C is deleted, not copied
Table UCMI10T is deleted, not copied
Table UCMI200 is deleted, not copied
Table UCMI210 is deleted, not copied
Table UCMI220 is deleted, not copied
Table UCMT010 is deleted, not copied
Table UCMT01C is deleted, not copied
Table UCMT01T is deleted, not copied
Table UCMT100 is deleted, not copied
Table UCMT10C is deleted, not copied
Table UCMT10T is deleted, not copied
Table UCMV01T is deleted, not copied
Table UCRX01C is deleted, not copied
Table UCRX02G is deleted, not copied
Table UCS0100 is deleted, not copied
Table UCS0102 is deleted, not copied
Table UCS0103 is deleted, not copied
Table UCS0104 is deleted, not copied
Table UCS0105 is deleted, not copied
Table UCS0106 is deleted, not copied
Table UCS0107 is deleted, not copied
Table UCS0108 is deleted, not copied
Table UCS010T is deleted, not copied
Table UCS0110 is deleted, not copied
Table UCS01A0 is deleted, not copied
Table UCS01A1 is deleted, not copied
Table UCS01A2 is deleted, not copied
Table UCS01A3 is deleted, not copied
Table UCS020T is deleted, not copied
Table UCT100G is deleted, not copied
Table UCT100T is deleted, not copied
Table UCT101C is deleted, not copied
Table UCT101T is deleted, not copied
Table UCT2001 is deleted, not copied
Table UCT200G is deleted, not copied
Table UCT200T is deleted, not copied
Table UCT2010 is deleted, not copied
Table UCT2011 is deleted, not copied
Table UCT2012 is deleted, not copied
Table UCT2013 is deleted, not copied
Table UCT2014 is deleted, not copied
Table UCT2015 is deleted, not copied
Table UCT2016 is deleted, not copied
Table UCT3000 is deleted, not copied
Table UCT300G is deleted, not copied
Table UCT4000 is deleted, not copied
Table UCT400G is deleted, not copied
Table UCT8000 is deleted, not copied
Table UCT800G is deleted, not copied
Table UCT8010 is deleted, not copied
Table UCT8011 is deleted, not copied
Table UCT8012 is deleted, not copied
Table UCT8013 is deleted, not copied
Table UCT8014 is deleted, not copied
Table UCT8015 is deleted, not copied
Table UCT8016 is deleted, not copied
Table UCT801G is deleted, not copied
Table UCT801T is deleted, not copied
Table UGMD_BACK is deleted, not copied
FINB_TR_CC_EXIT executed       212(       13) entries copied
Exit program FINB_TR_CC_EXIT successfully executed 11:40:22
Exit program CLIENTCOPY_SELECT_TEXTID_ALL successfully executed 11:40:23
what is the solution for this

Hi,
Ho, what u r planning to do.Did u take online or ofline backup before u applied SP.
If you took better you restore.
One think, did you check the tablespace of your system..
if not chk it?
Regards
MLN

Similar Messages

  • Unable to do the Local Client Copy

    Hi, Experts
    I have created a new client, and i have logged on that client and doing the local client copy. When I see the client copy log the client copy got cancelled.
    When i check the log i am getting a error saying "The System's Time Zone Cannot be Determined. Enter it Using STZAC."
    The time zone maintained in INDIA.
    Thanks & Regards

    Hello
    Perform some checks
    Please make sure that SAP time is same as the time on the operating system
    Also make sure that u maintain time in the original client i.e the client which u r copying
    Also I would recommend that you first delete the new client,then maintain all setting for time zone through the note 667169 and then again try client copy
    hope it help
    Rohit

  • Local client copy error very..very......urgent

    Hi experts,
    while i am performing local client copy in background mode from 000 to 200
    it is terminattin and it showing the below error
    Target Client           200
    Source Client                   000
    Copy Type               Local Copy
    Profile                 SAP_CUST
    Status                  Cancelled
    User                    SAP*
    Start on                10.05.2008 / 14:53:00
    Last Entry on           10.05.2008 / 14:53:51
    Statistics for this Run
    - No. of Tables                 0 of     53448
    - Copied Lines                  0
    Check System Log (SM21)
    arnings and Errors
    Table Name       Component Package
    /1FB/MD___3M0001           DDIC Error        (See SE14)
    /1FB/MD___3M0002           DDIC Error        (See SE14)
    /1FB/MD___3M0003           DDIC Error        (See SE14)
    /1FB/MD___3M0004           DDIC Error        (See SE14)
    /1FB/MD___3M0005           DDIC Error        (See SE14)
    /1FB/MD___3M0006           DDIC Error        (See SE14)
    /1FB/MD___3M0007           DDIC Error        (See SE14)
    /1FB/MD___3M0008           DDIC Error        (See SE14)
    /1FB/MD___3M0009           DDIC Error        (See SE14)
    /1FB/MD___3M000A           DDIC Error        (See SE14)
    /1FB/MD___3M000B           DDIC Error        (See SE14)
    /1FB/MD___3M000C           DDIC Error        (See SE14)
    /1FB/MD___3M000D           DDIC Error        (See SE14)
    /1FB/MD___3M000E           DDIC Error        (See SE14)
    /1FB/MD___3M000F           DDIC Error        (See SE14)
    /1FB/MD___3M000G           DDIC Error        (See SE14)
    /1FB/MD___3M000H           DDIC Error        (See SE14)
    and when i checkd in system log in sm21 it is showing
    he transaction has been terminated.  This may be caused by a
    ermination message from the application (MESSAGE Axxx) or by an
    rror detected by the SAP System due to which it makes no sense to
    roceed with the transaction.  The actual reason for the termination
    s indicated by the T100 message and the parameters.
    plz......any one can help me
    cheers
    deepak

    Actually it is problem with my database
    recently i restored my database after that i performd client copy
    when i am doing it above error showed in scc3 i checked the system log in that i found oracle error for that i reused my temp datafile using sql commands
    SQL:>alter tablespace PSAPTEMP 'path of the file' add tempfile reuse;
    finally i finished the my client copy with out any error
    regards
    deepak

  • Local client copy with warnings and errors

    Hi ,
    I am doing a local client copy and is still running . There are a few large tables which have not been copied successfully and is shown under "Warnings and Error". The tables show "Program Cancel (See SM21)". In SM21 , I find the workprocess was disconnected from the database.
    Now my questions is , once all the remaining tables complete , will I be given an option to repeat the copy for the failed tables only. The system is 6 TB and it is running for more than 15 days now.
    Please suggest.
    Regards
    Ratnajit

    will I be given an option to repeat the copy for the failed tables only
    No, it doesn't ask you to repeat copy only for failed tables.
    The system is 6 TB and it is running for more than 15 days now
    What is the requirement to do such BIG client copy?
    Regards,
    Nick Loy

  • Local client copy error - Table "BKPF" not edited due to excessive number

    Hi,
    I am performing a local client copy on our ECC 6.0 system. Client copy took more than 12 hours and its still in progress with 7 tables still to be copied. Logs in SCC3 -
    ===
    2 ETA163 Table "BKPF" not edited due to excessive number of errors
    2 ETA057 WARNING: Cancelled several times
    2 ETA163 Table "COEP" not edited due to excessive number of errors
    3 ETA311 Process "00002" started on server "sfrndevsap15"
    (time: "17:20:51")
    2 ETA297 Error: Table "ONROV" error in DDIC - Check table with SE14
    2 ETA057 WARNING: Cancelled several times
    2 ETA163 Table "FAGLFLEXA" not edited due to excessive number of errors
    3 ETA311 Process "00003" started on server "sfrndevsap15"
    (time: "17:20:52")
    4 ETA346 "FAGLFLEXC :"" 0 0 0 DEL.""
    0 0 17:20:52"
    2 ETA057 WARNING: Cancelled several times
    2 ETA163 Table "HRP1001" not edited due to excessive number of errors
    3 ETA311 Process "00004" started on server "sfrndevsap15"
    (time: "17:20:52")
    4 ETA346 "VSAFVU_CN :"" 0 86123 0 DEL.""
    0 29 17:21:21"
    2 ETA057 WARNING: Cancelled several times
    2 ETA163 Table "PCL4" not edited due to excessive number of errors
    ===
    Please help ASAP, as this is effecting our testing team.  I have tried to copy individual tables also using a transport request number and SCC1 to copy it to the target client.  This is also taking quite a long time.
    Thanks in advance,
    Abdul

    Hi Abdul,
    What does your system log say ?
    Check this SAP Note
    Note 579783 - CC ERROR: Loss of data - table not copied
    run the report RSCC_VERIFY to check if the table is consistent within the source client.
    SAP will only provide support for RSCC_VERIFY messages if there is a specific problem in an application in the target client that can be assigned immediately to the messages.
    RSCC_VERIFY is delivered with SAPKB46B49, SAPKB46C35 and SAPKB46D24. In older releases, you can create the report in the ABAP editor (transaction SE38) in accordance with the attached advance correction. Use the development class or the STRM package for this.
    Regards,
    Siddhesh

  • Client Copy- Cancelled

    Hi,
    I am doing a local client copy with SAP_ALL profile on ECC 6.0 (Kernal 700 Patch- 133). After creating a new client, i started the client copy with sap* user with SCCL t-code.
    After some time, the client copy got cancelled and  it gave a SYSTEM_CORE_DUMP in ST22.
    "Error in the SAP kernel.
    The current ABAP "SAPLSDBI_DYNSQL" program had to be terminated because the
    ABAP processor detected an internal system error."
    Do you think I have to upgrade the kernal to patch level 185 for this error or it can be solved by some other ways.
    Please suggest.
    Regards,
    Jitender

    Do you think I have to upgrade the kernal to patch level 185 for this error or it can be solved by some other ways.
    Kernel upgrade is not required only for this activity, as you are allready in 133. First of all check the space at file system on OS level and remove the core dump, then run the check db and see the space available on database, then perform a test run and at last execute the local client copy
    Regards,
    Subhash

  • Condition record's not getting copied in local client copy !!!

    Hi ALL,
    I have a one question/doubt regarding local client copy.
    Our functional team creates condition type (for e.g.: thru FV11 for MM) in one client (golden), when I take client copy of that client with SAP_All profile, but condition type is not getting copied in the new client.
    I found for Sap notes, in one note it was suggested that change documents are not copied with any profiles.
    I found in FV11, there is one option, Send Condition, thru which we can send by Logical systems, but its giving error msg u201CNo relevant partner system DEVCLNT300 exists for output category COND_A
    Message no. VJ000u201D
    Can u pls suggest proper way to copy/transport condition record in new client created?
    Regards,
    C  Singh.

    Please refer below link
    http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm
    Regards,
    Pavan

  • Local Client Copy taking too much time

    Hi All,
    I recently done a system refresh of my Quality server (restore PRD backup to QUA Server)
    After that I have created a new client and has initiated a local client copy after the test run
    went successful.
    Then after reading approximately 4500 table it has got stuck and I saw in SM50 that table "ACCTCR"
    was running since approximately 56000 seconds.
    Then I run the program 'BTCTRNS1" to clean the work processes.
    After that I again restarted the local client copy in restart mode.
    Now since last 3 hours I can see in SM50 that table u201CACCTCR" is being sequentially ready for approx 500(under Actions) seconds and then delete for 15 seconds (under actions).
    I also found that table size is also not increasing as well as same table is being sequentially read for 500 sec and then deleted for 15 seconds (under Actions in sm50) and program is also same.
    This is happening since last 3 hours now.
    Under SCC3 I can see the status as processing reset.
    Does anyone face this issue ever? And can anyone suggest is everything is running OK or there is
    some problem.
    Your suggestions will be highly appreciated.
    Regards,
    PG

    Hello,
    Did you recalculate full DB statistics after the last system copy from PRD to QA ?
    This is very often forgotten, leading to long elapse times in select statements.
    Check via DB20 on table ACCTCR from when latest DB statistics date.
    Eventually rebuild all indexes from ACCTCR, this can be done online via ABAP RSANAORA if you are running Oracle.
    You can also perform an SQL trace on the current running process to see if the select from the client copy is running correctly.
    I also know that ACCTCR is a table containing transactional data and most of the time it contains a lot of data.
    II suppose you are running a client copy with profile SAP_ALL on QA based on a copy of PRD ?
    This means that you will end up with 2 production clients in QA ?
    Is your QA system sized for this ?
    Another question that you can ask your client, is data from ACCTCR really needed on QA on both clients.
    If not it is maybe better to start an archiving based on SAP Note :
    Note 83076 - MM_ACCTIT: Archiving programs for ACCTIT, ACCTHD, ACCTCR
    Followed by a new client copy.
    Success.
    Wim

  • Can we create a local client copy for the RFID Client in discovery Box

    Can we create a local client copy for the RFID(400 Client) in the Discovery Box,and if created which profile we have to select for the client and also at a time we can work on these both client or not  .

    This isn't possible with Live Mail.  Acrobat has an add-in for Outlook (which you've used), but there is no similar function for Live Mail.

  • Need Help!! Errors during Local Client Copy

    Doing a Local Client Copy and getting these error messages in the log:
    Table Name       Component          Package
    /1CN/CMFSAPH0FOR                    DDIC Error        (See SE14)
    /1CN/CMFSAPH1FDT                    DDIC Error        (See SE14)
    /1CN/CMFSAPH1FFX                    DDIC Error        (See SE14)
    /1CN/CMFSAPH2TGR                    DDIC Error        (See SE14)
    /1CN/CMFSAPH2TRM                    DDIC Error        (See SE14)
    /1CN/CMFSAPH3TCT                    DDIC Error        (See SE14)
    /1CN/CMFSAPH3TUS                    DDIC Error        (See SE14)
    /1CN/CMFSAPH4TFX                    DDIC Error        (See SE14)
    /1CN/CMFSAPH4TQU                    DDIC Error        (See SE14)
    Then I go to SE14 then put the name of the tables then click CHECK >> DATABASE OBJECT and then as the result I get:
    "Table is not created in the database"
    If I go down to the database level and look within the Oracle database dba_tables the tables and objects exists within the database but SAP is unable to recognize them.  All objects were imported with a Oracle Data Pump dump file and now I just need help in getting SAP to recognize the tables.
    Edited by: Adam Gendle on Feb 19, 2010 12:29 AM

    Hi,
    Its showing inconsistency between ABAP Dictionary and the database.
    Have you run Test-Run before performing actual client copy ?
    Please check the Consistency of affected Tables.
    SE11 -> Display Table -> Utilities -> Database Object -> Check
    (check DB Object as well as Run time Object)
    Please refer this [SAP Note 686357 - Table pool length incorrect after Unicode conversion|https://service.sap.com/sap/support/notes/686357] to get more information. The relevant solution is mentioned there if the pool tables having inconsistency with VARDATA field.
    Also refer SAP Note 1171306 - Error with pooled tables when copying a client.
    Regards,
    Bhavik G. Shroff

  • Local client copy Error

    I have fresh installed ECC 6.0 with HP UX. I want to do local client copy.but it give error
    lient copy from 03.02.2009 23:20:18
    ystem ID............................ QAS
    arget client........................ 900
    /3 Release.......................... 700
    Basis Support Package...............SAPKB70009
    ost................................. quality
    tart in background............. .....X
    ser................................. SAP*
    arameter
    ource client........................ 000
    ource client user masters............000
    opier profile:.......................SAP_ALL
    able selection
    ustomizing data .....................X
    ith application data................ X
    nitialize and recreate......... X
    hange documents are not copied
    est mode (without database update).. R
    thanks
    Manu

    thanks for your reply.I have set my INDIA time in 001
    But during client copy it gives  system Log
    Details Page 2 Line 9 RSLG0001 - SAP Analysis of the Central System Log       1
    Time     SAP instance   Type Nr  Clt User TCode Program Terminal Package Grp N Text
    18:16:23 quality_QAS_00 BTC  008 900 SAP*                        SBAC    BY  4 Database error 24909 at SEL access to ta
    Details
    Recording at local and central time........................ 05.02.2009 18:16:23
    Task...... Process                      User...... Terminal Session TCode Program Cl Problem cl         Package
    04523      Background Processor No. 008 SAP*                      1               K  SAP Web AS Problem SBAC
    Module nam Line SQL functi Table Name
    dbrepo     2655 SEL        REPOLOAD
    Documentation for system log message BY 4 :
    After the attempt to access a database table the database system has
    returned an error code which indicates that the operation concerned
    could not be performed successfully.
    The text of the system log message shows the error number, an
    identification of the operation and the name of the table concerned.
    The following abbreviations are used for the database operations:
    CLC - Closing a database cursor
    CRT - Creating a table on the database
    DEL - Deleting table entries
    EXE - Immediate execution of a database operation
    FET - Reading one or several records of a database cursor
    INS - Inserting one or several records into a database table
    PRE - Executing a PREPARE operation
    SEL - Executing a database selection
    UPD - Changing one or several records in a database table
    echnical details
    File Offset RecFm System log type    Grp N variable message data
       1 135000 g     Database SQL Error BY  4 24909 SELREPOLOAD                                   dbrepo  2655
    Plesae suggest
    RAJ

  • Local Client Copy Error : Completed w. Dictionary Errors

    Hi,
    I have performed local client copy in the ECC 6.0 system.I mean SAP Netweaver 7.0 EHP1.I have selected source system 100 and target system 200 and profile is SAP_CUST with my User ID in 200 client having SAP_ALL,SAP_NEW.In the SCC3 throws error i,.e, Completed w. Dictionary Errors.The client 200 is newly created in the system.
    Target Client             200
    Source Client           100
    Copy Type               Local Copy
    Profile                      SAP_CUST
    Status                      Completed w. Dictionary Errors
    User                        I998769
    Start on                   06.12.2009 / 12:47:59
    Last Entry on          06.12.2009 / 14:00:12
    Statistics for this Run
    - No. of Tables            56872 of     58391
    - Deleted Lines           5705995
    - Copied Lines            5770444
    Warnings and Errors
    Table Name             Component          Package
    A001                   SD-MD-CM           DDIC Error        (See SE14)
    A004                   SD-MD-CM           DDIC Error        (See SE14)
    A005                   SD-MD-CM           DDIC Error        (See SE14)
    A006                   SD-MD-CM           DDIC Error        (See SE14)
    A007                   SD-MD-CM           DDIC Error        (See SE14)
    A009                   SD-MD-CM           DDIC Error        (See SE14)
    A010                   SD-MD-CM           DDIC Error        (See SE14)
    A012                   SD-MD-CM           DDIC Error        (See SE14)
    A015                   SD-MD-CM           DDIC Error        (See SE14)
    Nearly about 1520 tables are not copied from the source client and there is no dumps for that.Please,find below for the file log information which is highlighted in red color in log.
       Start of post-processing by application exits 13:57:48
       Automatic postprocessing of client 200 was incorrect -> long text
       Post-processing required for FINB_TR_CC_EXIT_TARGET
       Validation/substitution: Programs should be regenerated
       Selected tables           :         58.391
       Copied data in kBytes  :      2.933.491
       Deleted data in kBytes :      2.845.416
       Program ended with error or warning, return code: W
       Runtime (seconds)         :          4.333
       End of processing: 14:00:12
    Kindly,help me how to resolve the issue and provide relavent notes which is applicable to my error as per the SAP release.

    Hi,
    We encounter the same problem with different A***-tables. The problem is that these seem to be pooled tables. I had a look at sap note 1248769 and it mentions that the reconstruct-option is only liable for transparent tables. This seems to be right, as the option "Reconstruct" is greyed out in tx SE14 when we try to.
    Any other options?
    Jan
    PS. Sorry for hijacking the thread, but it seems the topic starter is still looking for an answer as well
    Edit: Found another SAP Note which seems relevant: 1171306. This note has the following segment in it:
    If you still want to remove the inconsistency, you can proceed as described in the following.  However, the table must be empty for you to be able to do this (you can check this with the report NROWS:  start the report NROWS, enter DVPOOLTEXT for "Table 1" on the selection screen and choose Execute.)
    1. Call transaction SE14.
    2. Edit DVPOOLTEXT.
    3. Delete the database table.
    4. Create a database table.
    If the pool is not empty and the data is required, it must be unloaded in advance and then read again after you have recreated the table.
    Ofcourse we would like to preserve our data in the tables. Let's take a look at an example in our system: Table A017. This table has encountered the DDIC error during client copy. We have performed the following analysis actions on it:
    Report NROWS mentions 116.390 entries for table A017.
    In SE16 table A017 has 0 entries.
    In SE14 I have performed two checks: The runtime object seems ok. When I check database object in SE14 the system returns the following message: "Table is not created in database".
    Any tips?
    Edited by: Jan Laros on Sep 8, 2010 2:25 PM

  • Local Client Copy Error in Post-Processing

    Hello All,
    We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice. Also performed the update statistics on db.
    All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
    Table Name                  Component       Package
    /SAPCND/CC_GROUP_WS_NG      AP-PRC-CON      Post-Processing Required
    Following entires in the file logs are displayed:
    Begin of GEN_STATUS Update
    Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
    No fields in structure /1CN/WS_ID_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
    No fields in structure /1CN/WS_IS_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
    No fields in structure /1CN/WS_ED_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
    No fields in structure /1CN/WS_ES_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
    No fields in structure /1CN/WS_UI_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Begin of GEN_STATUS Update
    Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
    Can anyone guide me the best way forward.
    Thanks,
    Antarpreet

    Hello Gagan,
    I am facing the errors in table /SAPCND/CC_GROUP_WS_NG belonging to component AP-PRC-CON. It says post processing required.
    The oss note says about component FINB-TR-DERIVATION.
    I am not sure whether it is good to run the steps as mentioned in oss note 1235955.
    Thanks for your response and look forward to further help.
    Regards,
    Antarpreet

  • Local Client Copy error in post processing phase

    Hello All,
    We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice.
    All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
    Table Name                  Component       Package
    /SAPCND/CC_GROUP_WS_NG      AP-PRC-CON      Post-Processing Required
    Following entires in the file logs are displayed:
    Begin of GEN_STATUS Update
    Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
    No fields in structure /1CN/WS_ID_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
    No fields in structure /1CN/WS_IS_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
    No fields in structure /1CN/WS_ED_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
    No fields in structure /1CN/WS_ES_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
    No fields in structure /1CN/WS_UI_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Begin of GEN_STATUS Update
    Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
    Can anyone guide me the best way forward.
    Thanks,
    Antarpreet

    Hi,
    You need not worry at all as this is not a warning (although marked
    so in message), and its just an information so you are better able to run
    the job RGUGBR00 in SE38 with all the options mentioned in message above
    marked.
    Regards,
    Aidan

  • Local client copy for delta changes

    Hello Support,
    We have requirement of copying data(local client copy) of last one month. This is a rrepetitiveactivity and has to be done once in every month.
    For example, in DEV we have 3 clients 200, 210 clients. They make changes in 200 client and these changes has to be reflected in 210 clients. For changing 1 month data we can't perform client copy with SAP_ALL.
    I have an idea that we can perform local client copy using TDMS 4.0 but can we do delta client copy?
    So, my question here is
    1. Can we perform client copy for specific selected data(by date, for eg last 30days) without deleting existing data?
    2. We have step 'Start Deletion of Data in Receiving System' in Time Based Reduction scenario, can we skip this and continue proceed with client copy?
    Thanks,
    Uday.

    Hello Uday,
    SAP TDMS Time based reduction package copies the whole of master data and customization data along with the transactional data being filtered based on the Data Slice Date Provided.
    SAP TDMS cannot be used for a Delta Copy to copy only a months data keeping the existing data in the system. If the requiremnt is to run every month, you could give an approritate slice date and transfer the whole data again using SAP TDMS which would include the latest one month data as well.
    It is not recommended to skip the step "Data deletion in Receiver system" and then execute the SAP TDMS package. This can lead to issue during the transfer.
    Regards,
    Sreejith Rajashekaran

Maybe you are looking for

  • Cannot Upload a file from local system

    Hi, I am trying to send an email with an attachment from an JSP form using javamail in a STRUTS action class. I uploaded the JSP form and action class to my web server (Unix with JBOSS) and now the email is not sent and I receive the following error

  • Firefox will not download to my computer. tried 4 times

    I could NOT get firefox to update. I tried downloading it, but it would NOT download after 4 tries. Can you E-mail me a copy to [email address removed by moderator], - so that I can try to directly load it into my computer. I believe this is due to a

  • Forbidden  You don't have permission to access / virtualhostname / filename .html on this server.

    Hello Everyone I've just configured Apache on my Newly upgraded Mountain Lion on Macbook Pro 13. Steps i followed to activate apache, php and mysql on my macbook pro is as follows: http://coolestguyplanettech.com/downtown/install-and-configure-apache

  • ScrollPane woes 2

    Hi, I try to attach a ScrollPane to a TextField with some text, but I have 2 bugs: The scrollBar is shown inside Flash testing movie environment, but not on the server, even when the text is long enough for a scrollbar. Even if there is no scrollbar,

  • ADF MOBILE: Storing images into sqlite DB

    Can someone please show me how to store and retrieve images and other file types into the local sqliteDB. I know I have to use blobs, but what is the process of converting a file into a blob and converting a blob into a specific file (an image or pdf