LOCAL_ENTRY_NOT_FOUND error in BW3.1c
I recently transported a custom ODS object to production enivronment. I now get an abap dump when I use tcode RSA11.
Dump has msg of LOCAL_ENTRY_NOT_FOUND error.....
log text:
Source code extract
000010 METHOD read_from_db.
000020
000030 DATA: l_s_rsdodsoloc TYPE rsdodsoloc.
000040
000050 r_exists_on_db = rs_c_true.
000060 * read ods object from DB
000070 SELECT SINGLE * FROM rsdodsoloc
000080 INTO l_s_rsdodsoloc
000090 WHERE odsobject = n_odsobject.
000100 IF sy-subrc <> 0.
000110 * read primary table
000120 SELECT SINGLE odsobject FROM rsdodso
000130 INTO (l_s_rsdodsoloc-odsobject)
000140 WHERE odsobject = n_odsobject.
000150 IF sy-subrc = 0.
000160 * create local entry (i.e. ODS object is deactivated)
000170 CALL METHOD cl_rsd_odso=>insert_local_entry(
000180 i_odsobject = n_odsobject ).
000190 * read ods object from DB
000200 SELECT SINGLE * FROM rsdodsoloc
000210 INTO l_s_rsdodsoloc
000220 WHERE odsobject = n_odsobject.
000230 IF sy-subrc <> 0.
> MESSAGE x000(r7) WITH 'LOCAL_ENTRY_NOT_FOUND'.
000250 ENDIF.
000260 ELSE.
000270 r_exists_on_db = rs_c_false.
I see that the transport got a warning msg, but both dev and test client are ok. after transport, I checked that ods was active, but since initial load into ods from flat file (which has ended in failure due to same abap dump) I was able to notice that ods was inactive. Since seeing that, I tried to go into the ods in production and got the abap dump. Now whenever I use tcode RSA11 or try to get to any infoprovider from the admin workbench, I get the same abap dump.....
Has anyone seen this before? What can be done to correct this?
The transport warning is:
Application component DM of DataSource 8ZREBUD does not exist
Message no. R8418
Diagnosis
You tried to assign a DataSource to the application component DM. This application component is, however, not entered in the RODSAPPL table as an application component.
but the DM application component does already exist in production and it is in the RODSAPPL table.....
And I did try re-transporting the ods just to see if that would fix it, but it had the same transport warning and I still get teh abap dumps in production client....
Please help if you can.
Marc
This has happend a number of times. the first time, we had multiple instances of the client, so I logged via a different instance and ran the tcode, it then cleared whatever error and I was ok.
The other times I ran the t-code in debug mode and trapped where the dump occurred. I then changed the sy-subrc = 0 and it bypassed the error
Similar Messages
-
Error in BW3.5 query execution
Hi,
I am trying to execute BW3.5 reports and facing below error on them.
*Specify a value for variable 0P_FPER
System error in program SAPLRRK0 and form APPEND_KHANDLE_1-01- *
I executed same in Dev. system and error remains same.
Specify a value for variable 0P_FPER : this is a SAP exit variable maintaining in Fiscal year Object where these properties are Optional and not selected Read for input (Checked in Dev.)
*System error in program SAPLRRK0 and form APPEND_KHANDLE_1-01- * : verified this issue in SAP market place and we have adequate OSS notes in SAP system.
Let me know any further information required?
It is apreciated any one could help on this and very very urgent for us.
Thanks,
PraveenHi,
check following thread
http://forums.sdn.sap.com/thread.jspa?threadID=141178
also try looking at following options
1. try to generate query in RSRT and see if it runs
2. Put breakpoint on some exit variable in query and try debugging the query through RSRT again.
see if there is any specific sap note if 1 and 2 doesn't solve your issue.
Thanks and regards
Kiran -
BW3.5: Error message when trying to activate the transfer rule
When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
ArunabhaHi Roberto,
Thanks for yoyur prompt reply, I would try to follow the instruction, but at the same time please note that previously we had no issue in activating the transfer structure. I would like to see the log in the source system, but don't know how to and which transaction to use etc. any help would be appreciated.
Thanks
ARUN -
Error when creating R/3 source system in BW3.5
I HAVE CREATED SOURCE SYTEM FOR R/3 TO PERFORM EXTRACTION IN BW-3.5.
AFTER I DID ALL THE BASIC SETTING LIKE CREATING LOGICAL SYSTEM AND ASSIGNING CLIENT AND CREATING RFC DISTINATIONS.
I TRY TO CREATE SOURCE SYSTEM BY RIGHT CLICKING ON SOURCE SYSTEM ROOT NODE AND SELECTED THE OPTION SAP SYSTEM FROM RELEASE 3.0D(MANUAL CREATION) AND ENTERED
RFC DISTINATION : (LOGICAL SYSTEM ID OF R/3)
LOGICAL SYSTEM NAME: (LOGICAL SYSTEM ID OF R/3)
SOURCE SYSTEM NAME: (R/3 SOURCE SYSTEM)
ERROR MESSAGE -- NO:447
BASIC TYPE ZSBA005 DOES NOT EXITS
ACTIVATION OF SOURCE SYSTEM FAILED
PLEASE HELP ME IN THIS ISSUE..
CHEERS
AMAR.Hi,
Kindly do not type completely in CAPS.
Take a look at SAP Note 140276 to correct errors in source system assignment.
BR/
Mathew. -
SAP BW3.0 - Oracle service startup error
Hi everyone,
I am not sure whether or not this is a right place to put my question..
We have installed the SAP BW 3.0 on QA system. But yesterday onwards, it started giving an error message while starting one of oracle services before logon to sap-bw.
It says ora81http error: terminated unexpectedly; I know it is related to oracle. I posted in oracle related forums didnot get any reply.
Any experience/reason with this and possible resolution? Gurus, Please help me out..
The points will be rewarded..
thanks,
ghoshHi
That particular service you can stop using service manager. There is no harm.
Don't forget to award points if I am right!!
Regs
Gopi. -
SAPGUI 710 + BW3.x run-time error
Hi all,
I'm having a problem that is driving me completely crazy. I have a combination of systems available (Windows XP or Vista and Office 2003 or 2007) and they are all causing the same error for me.
As I write this I am using Windows Vista with SAPGUI 710 and office 2003, however as mentioned before the same error occurs with SAPGUI 710 and XP for me (different machines)
I have installed 710 with all the options from the files:
50083078_2
50083078_4
50083078_5
As instructed from the distribution center. I then installed support package 1 (gui710_1-10002995).
When I run BEx Analyzer 3.x, create a new query, and try to restrict a characteristic using a variable (in this case a selection option) as i drag the variable from the available list to the selection i get several of these messages:
Run-time error '-2147417848 (80010108)':
Automation error
The object invoked has disconnected from its clients.
Followed by:
Run-time error '440':
Automation error
Searches for these have yield me no results for 710 in combination with Vista or XP.
Thanks in advance.
DezVidya,
Goto http;//service.sap.com click on SAP Support Portal, you are going to need an 'S' number to login. Once you have logged in goto 'Help & Support', 'Search for SAP Notes' and in the top right where it says 'Number' enter the note number.
Cheers,
Dez -
Error while activating Process Chains
Hi all,
while activating the Process Chains, i am getting the following error "Job BI_PROCESS_PSAPROCESS could not be scheduled. Termination with returncode 8"
when i double click on the error msg, i got the following help msg: "
<i>Message no. RSPC065
Diagnosis
Program RSPROCESS is to be scheduled as job BI_PROCESS_PSAPROCESS under user ALEREMOTE.</i>
Can any one please show some way to solve this problem? please do this favor, i have been suffering with error for a long time.
Points will be given
Thanks
GaneshHi,
Just analyze the error message that you get while activating the PC, don't give any server name.If you are trying to run process chain using Flat file, it won't work,
and you should have source system R/3 or you have own datasources in BW system itself at that toime you can use PC to extract data. If your source system is Flat ile, it won't work. other wise you should place your flat file in application server, using AL11 tcode.
<b>OSS : 511475</b>
<b>Symptom</b>
You cannot schedule or perform any batch jobs with the BW or source system background user.
The error RSPC 065 occurs in the process chains:"Job could not be scheduled, termination with return code 8"
<b>Other terms</b>
RSPC065
<b>Reason and Prerequisites</b>
The user type is
"CPIC" up to 4.6B
"Communication" as of 4.6C
This user type may not execute or start any batch jobs, irrespective of the user authorizations.
<b>Solution</b>
Set the type of background user to
"Background" up to 4.6B
"System" as of 4.6C
This user type corresponds to the "Communication" type and may also perform background functions.
Through the Customizing, the BW user is automatically created by mistake as a communication user.Depending on your BW system release, you can solve this problem as follows:
BW 2.0B
Import Support Package 24 for 2.0B (BW2.0B patch24 or SAPKW20B24) into your BW system. The Support Package is available once note 456551 with the short text "SAPBWNews BW 2.0B Support Package 24", which describes this Support Package in more detail, has been released for customers.
BW 2.1C
Import Support Package 16 for 2.1C (BW2.1C patch16 or SAPKW21C16) into your BW system. The Support Package is available once note 456566 with the short text "SAPBWNews BW 2.1C Support Package 16" has been released for customers.
BW 3.0A
Import Support Package 8 for 3.0A (BW3.0A patch08 or SAPKW30A08) into your BW system. The Support Package is available once note 452632 with the short text "SAPBWNews BW 3.0A Support Package 08" has been released for customers.
<b></b> -
Error while executing the WorkBook
Hi,
While executing WorkBook, I am facing an error "A critical program error has occured. The program will now terminate.Please refer to the trace for further information".
When I check in the trace, the error description is "System.NullReferenceException: Object reference not set to an instance of an object."
Can someone plese guide me on how to solve this issue !!
Thanks & Regards
Seshendra ReddyHi,
Make sure you have .NET framework 2.0 with latest Service Packs installed on your system. Also try and see if you will be able to run the report by having more selections for restricting the data to a minimum. This is because, BI 7, uses more memory than what BW3.5 used to use. This inturn results in some reports not to run for same selection for which we could get back result in BW3.5
Thanks,
KR
Edited by: KR on Jan 20, 2009 3:59 PM -
Error while Migrating the custom routines in Transformations
Dear All,
I am in the process of migrating BW 3.5 to BI 7.0.I migrated the Standard cubes and DSO's from BW3.5 to BI 7.0 flow successfully.
But while migrating the transformations which are having the custom routines,I am facing the below errors.
The data object "COMM_STRUCTURE" does not have a component called BIC/ZGROSSPRI".But the routine contains BIC/ZGROSSPRI.
I tried to change the BW 3.5 terminology to BI 7.0 terminology.(Like COMM_STRUCTURE replaced by SOURCE_FIELDS).But unable to solve.There are nearly 20 custome routines written in all transformations.
Can any one guide me who faced the same tyepe of problem?
Thanks & Regards,
DinakarHI,
We need to include Source and Target see the below article.
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
How to Correct Routines in Transformations
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20correct%20routines%20in%20transformations.pdf
Thanks
Reddy -
Error on page from BW 3.5's default web template
Hi Guru's,
We have a problem in our new BWD BW 3.5 environment where we are getting the "error on page" error from SAP-generated code and we arent sure why.
On our old BWT BW 3.0b platform, we have been using a modified version of the 0query_template called Z_QUERY_TEMPLATE. We did a system copy of BWT to BWD, our new BW 3.5 platform. At that point in time we would see our old BW 3.5 default template for queries that we ran. We wanted to see what the new default web template looked like in BW 3.5. We found where we could remove the Z_QUERY_TEMPLATE from the Web Adhoc Analysis web template setting so we could see the new features of the BW 3.5 default BEx query designer template instead of our old BW 3.0b default template.
Now when we run a query through the BW 3.5 query designer on BWD, we are using BW3.5s default template. The prompt web page is fine. No errors on page messages.
However, the initial presentation of the query results displays okay, but shows "error on page" in the message bar at the bottom of the displayed page. As soon as we do any navigation on those query results that error on page goes away. If we navigate back to the initial presentation, all is still okay. If we use the context menu to go back to start, we again get the error on page.
This error on page does not happen in BQ2 (our new BW 3.5 QA environment copied from our old BW 3.0b QA environment where we had not yet changed the default BEx Query Designer template to be Z_QUERY_TEMPLATE). We have tried several queries and in each case, we get errors on page in BWD, but not in BQ2. We used ultraedit to compare the view source output from the equivalent web pages from BWD and BQ2 and the only difference is the validity date of the data. There are no other differences in the javascript code generated by BW in the two platforms.
The statement that Internet Explorer is saying is the problem is the same in each of the cases we have checked and that is:
SAPBWSetFocus(anchor);
Error: Object expected
Code: 0
Its in the set_tab() function.
<script type="text/javascript">
<!--
/* Calls the online Documentation via technical QueryName */
function callquerydoc() {
var docustart= '/sap/bw/doc/meta/fldmeta/default?tlogo=elem&objnm=' + document.getElementById('querydoc').innerHTML;
SAPBWOpenWindow(docustart,'Documentation',800,600);
/* Sets the displayed tab */
/* Check, which items of the Array check_items is not hidden.
Change the style of the HTML tag with id Group+Area/Group+Link */
function set_tab() {
if (!(navigator.appVersion.substring(0,1) == '4' && navigator.appName == 'Netscape')) {
var check_items = new Array('GR1Toolbar','GR2Chart','GR3TECommon','GR4Broadcaster');
for (i=0;i<check_items.length;i++) {
hidden = true;
prop = SAPBWGetItemProp(check_items<i>);
if (prop != null){
for(j=1;j<prop.length;j++){
if (prop[j][0] == "HIDDEN") hidden = (prop[j][1] == "X");
anchor_item = document.getElementById(check_items<i>.substring(0,3)+'Area').firstChild;
if (hidden) {
document.getElementById(check_items<i>.substring(0,3)+'Area').className='SAPBEXTbsTab';
anchor_item.title = 'Inactive Tab Page:' + ' ' + anchor_item.title;
else {
document.getElementById(check_items<i>.substring(0,3)+'Area').className='SAPBEXTbsTabSel';
anchor_item.title = 'Active Tab Page:' +' ' + anchor_item.title;
} /* if */
} /* for */
/* Set the BexHeader invisible when running as IView */
if (SAPBWGetProperty('RUNS_AS_IVIEW')) {
document.getElementById('bexheader').style.visibility='hidden';
document.getElementById('bexheader').style.display='none';
anchor = window.location.hash.substring(1,50);
<b>SAPBWSetFocus(anchor);</b>
} /*function */
-->
</script>
Because the error goes away as soon as we navigate Im thinking some object isnt being created or initialized, but since the view source code of these pages are identical Im wondering if there is some code that should be executing before this page that is not happening in BWD for some reason.
Any help will be much appreciated.
Thanks,
JeriHeike,
Thanks for your help in this. BWD and BQ2 are both on the same SP. SAP_BW release 350 level 10 (SAPKW35010) with BI_CONT at release 352 level 5 (SAPKIBIEP5).
I invalidated the server cache following your instructions and tried again, but am still having the same problem in BWD. The initial display gets the "Done, but with errors on page" message until any navigation is done.
I am using IE 6.0.2900.2180.xpsp_sp2_rtm.040803-2158 when I execute queries on both BWD and BQ2.
Please, do you have any other suggestions?
Thanks,
Jeri -
Getting error with Web Templates in BI 7.0
Hi Everyone,
We have upgraded BW3.5 to BW7.0. When we are executing any Web Template in browser we are getting this error-
RSBOLAP 018 Java system error:call FM RSWR_TEMPLATE_PROCESS_PROXY to ProgId CHWSXID01.....
For your information we have installed EP Usage and BI on the portal but Portal is not configured to the BI. Is it necessary to configure Portal to the BI?
After this when we are login to the portal we are getting this error-
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Cannot find BI master system
com.sap.ip.bi.base.service.connection.ConnectionException: Cannot find BI master system
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemAlias(GenericConnectionPool.java:81)
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemConnection(GenericConnectionPool.java:60)
at com.sap.ip.bi.base.application.impl.Application.createService(Application.java:459)
at com.sap.ip.bi.base.application.impl.Application.getProperty(Application.java:679)
at com.sap.ip.bi.base.application.impl.Application.startApplicationStep(Application.java:279)
Details: Full Exception Chain
System Environment
Server
BI Java Release: 7 - Patch level: 0000000013 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP unknown
Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Hewlett-Packard Company - 1.4.2 1.4.2.14-070618-19:48-PA_RISC2.0W PA2.0W (aCC_AP)
Operating System HP-UX - PA_RISC2.0W - B.11.11
Deployed SCAs
SCA Version SP Patch Compiled Deployed
ADSSAP 7.00 13 0 2007-08-12 01:18:54 CEST 2007-11-17 02:43:53 CET
BASETABLES 7.00 13 0 2007-08-12 01:36:38 CEST 2007-11-17 01:22:45 CET
BI-BASE-S 7.00 13 0 2007-08-12 12:03:10 CEST 2007-12-08 09:58:16 CET
BI-IBC 7.00 13 0 2007-08-12 12:03:28 CEST 2007-12-08 09:58:26 CET
BI-REPPLAN 7.00 13 0 2007-08-09 07:49:39 CEST 2007-12-08 10:01:05 CET
BI-WDALV 7.00 13 0 2007-08-09 07:49:47 CEST 2007-12-08 09:58:55 CET
BIWEBAPP 7.00 13 0 2007-08-12 12:05:56 CEST 2007-12-08 09:43:55 CET
BI_MMR 7.00 13 0 2007-08-12 01:37:49 CEST 2007-11-17 02:44:46 CET
BI_UDI 7.00 13 0 2007-08-11 19:04:00 CEST 2007-11-17 02:46:49 CET
CAF 7.00 13 0 2007-08-09 09:23:15 CEST 2007-11-17 02:53:13 CET
CAF-KM 7.00 13 0 2007-08-09 07:54:22 CEST 2007-12-08 10:21:28 CET
CAF-UM 7.00 13 0 2007-08-09 09:23:24 CEST 2007-11-17 02:54:18 CET
CORE-TOOLS 7.00 13 0 2007-08-12 01:41:21 CEST 2007-11-17 01:19:15 CET
EP-PSERV 7.00 13 0 2007-09-06 14:03:50 CEST 2007-12-08 10:02:22 CET
EP-WDC 7.00 13 0 2007-08-12 12:41:08 CEST 2007-12-08 10:03:50 CET
EPBC 7.00 13 0 2007-08-12 12:37:44 CEST 2007-12-08 08:07:23 CET
EPBC2 7.00 13 0 2007-08-12 12:38:06 CEST 2007-12-08 10:03:56 CET
JLOGVIEW 7.00 13 0 2007-08-12 00:16:00 CEST 2007-11-17 01:19:52 CET
JSPM 7.00 13 0 2007-08-12 00:17:00 CEST 2007-12-06 16:41:39 CET
KM-KW_JIKS 7.00 13 0 2007-08-12 01:45:19 CEST 2007-11-17 02:54:37 CET
KMC-BC 7.00 13 0 2007-08-12 12:41:47 CEST 2007-12-08 10:05:28 CET
KMC-CM 7.00 13 0 2007-08-12 12:43:04 CEST 2007-12-08 10:06:52 CET
KMC-COLL 7.00 13 0 2007-08-12 12:43:35 CEST 2007-12-08 10:07:49 CET
LM-PORTAL 7.00 13 0 2007-08-09 07:58:38 CEST 2007-12-08 10:07:59 CET
LM-SERVICE 6.40 10 0 2004-12-23 01:42:43 CET 2007-11-17 01:18:14 CET
LM-TOOLS 7.00 13 0 2007-09-06 10:46:34 CEST 2007-11-17 03:05:32 CET
NET-PDK 7.00 13 0 2007-08-12 12:45:34 CEST 2007-12-08 09:51:51 CET
RTC 7.00 13 0 2007-08-12 12:48:07 CEST 2007-12-08 09:51:56 CET
RTC-STREAM 7.00 13 0 2007-08-12 12:48:07 CEST 2007-12-08 10:08:05 CET
SAP-EU 7.00 13 0 2007-08-09 08:01:01 CEST 2007-12-08 10:19:31 CET
SAP-JEE 7.00 13 0 2007-08-12 01:53:11 CEST 2007-11-17 01:24:19 CET
SAP-JEECOR 7.00 13 0 2007-09-07 08:23:34 CEST 2007-11-17 01:27:06 CET
SAP_JTECHF 7.00 13 0 2007-08-12 01:56:44 CEST 2007-11-17 01:28:18 CET
SAP_JTECHS 7.00 13 0 2007-08-12 01:59:51 CEST 2007-11-17 02:32:48 CET
UMEADMIN 7.00 13 0 2007-08-09 09:39:47 CEST 2007-11-17 03:06:23 CET
UWLJWF 7.00 13 0 2007-08-12 12:52:23 CEST 2007-12-08 10:08:51 CET
VCBASE 7.00 13 0 2007-08-12 12:52:34 CEST 2007-12-08 10:22:05 CET
VCFLEX 7.00 13 0 2007-08-12 12:53:39 CEST 2007-12-08 10:21:32 CET
VCFRAMEWORK 7.00 13 0 2007-08-12 12:53:51 CEST 2007-12-08 10:21:42 CET
VCKITBI 7.00 13 0 2007-08-12 12:23:20 CEST 2007-12-08 10:22:10 CET
VCKITGP 7.00 13 0 2007-08-12 12:53:51 CEST 2007-12-08 10:22:15 CET
VCKITXX 7.00 13 0 2007-08-12 12:53:51 CEST 2007-12-08 10:22:19 CET
WDEXTENSIONS 7.00 13 0 2007-08-09 08:05:30 CEST 2007-12-08 10:24:17 CET
Full Exception Chain
Log ID 00306EF4B9BB0076000000120000327700044245C894263C
com.sap.ip.bi.base.service.connection.ConnectionException: Cannot find BI master system
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemAlias(GenericConnectionPool.java:81)
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemConnection(GenericConnectionPool.java:60)
at com.sap.ip.bi.base.application.impl.Application.createService(Application.java:459)
at com.sap.ip.bi.base.application.impl.Application.getProperty(Application.java:679)
at com.sap.ip.bi.base.application.impl.Application.startApplicationStep(Application.java:279)
at com.sap.ip.bi.base.application.impl.Application.initialization(Application.java:259)
at com.sap.ip.bi.base.application.ApplicationFactory.createApplication(ApplicationFactory.java:172)
at com.sap.ip.bi.base.application.ApplicationFactory.createApplication(ApplicationFactory.java:65)
at com.sap.ip.bi.webapplications.runtime.impl.Page.constructPage(Page.java:942)
at com.sap.ip.bi.webapplications.runtime.impl.Page.<init>(Page.java:761)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.createPage(Controller.java:511)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:972)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:864)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:488)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:22)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Helpful answers will be rewarded....
Thanks and Regards,
PankajSingle Sign On is optional.
What would happen is that the user that's using the Web Application Designer will have to have access to Portals, and the portal Sign On screen will appear once that user executes a Web Template.
It also depends on the Portal Strategy and the Security Strategy of your client. For example, the portal may only grant access to those used IDs in the Active Directory, so if your BEx WAD user is not defined in Active Directory that user will not have access to portals, and will not be able to execute the Web Template.
Cheers. -
'L_CHAVL_IN' Error while Activating Update Rules.
Hi All,
when i am tring to activate my update rules, it is giving error, field "L_CHAVL_IN' in unknown. I dont have that field in my objects.
i found that field in 'Progarm' for the update rules. that field is used in the exit of one of the feild in the update rules.
Please give me a solution how to solve this.
Regards,
Ramana.Check the following SAP Note (# 782858)
<b>Symptom</b>
When you activate the update rules, the system issues a syntax error: 'Syntax error: Field "L_CHAVL_IN" is unknown'.
<b>Other terms</b>
Syntax error; generation; l_chavl_in; update rules
<b>Reason and Prerequisites</b>
This is a program error. The error only occurs under the following circumstances:
You generate an optimized update rule;
An alpha conversion is required.
<b>Solution</b>
BW 3.0B
Import Support Package 25 for BW 3.0B (BW3.0B Support Package 25 or SAPKW30B25) into your BW system. The Support Package will be available once note 0723254 with the short text, "SAPBWNews BW3.0B Support Package 25", which describes the Support Package in more detail, is released for customers.
BW 3.10 Content
Import Support Package 19 for BW 3.10 (BW3.10 Support Package 19 or SAPKW31019) into your BW system. The Support Package will be available once note 0723261 with the short text, "SAPBWNews BW 3.1 Content Support Package 19", which describes the Support Package in more detail, is released for customers.
BW 3.50
Import Support Package 10 for BW 3.5 (BW3.50 Support Package 10 or SAPKW35010) into your BW system. The Support Package will be available oncenote 0763336 with the short text, "SAPBWNews BW Support Package 10 NetWeaver'04 stack 10", which describes the Support Package in more detail, is released for customers.
Assign pts if helpful.<b></b> -
System Copy - ABAP export using R/3 load -- RSCP ERROR: Altername NameTab
Hi all,
I am trying to export BW3.5 system using sapinst (R/3 load method). In the phase of executing export jobs , I am getting the error in SAPSSEXC.log by mentioning it as altername too old.
The log files are below.
RSCP ERROR: Altername NameTab too old
E:\usr\sap\BWA\SYS\exe\run/R3load.exe: START OF LOG: 20090209061745
E:\usr\sap\BWA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#22 $ SAP
E:\usr\sap\BWA\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
Compiled Feb 19 2008 23:17:57
E:\usr\sap\BWA\SYS\exe\run/R3load.exe -datacodepage 1100 -e C:\Program Files\sapinst_instdir\NW04\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPSSEXC.cmd -l C:\Program Files\sapinst_instdir\NW04\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPSSEXC.log -loadprocedure fast
(DB) INFO: connected to DB
(GSI) INFO: dbname = "hsotname "
(GSI) INFO: vname = "MSSQL "
(GSI) INFO: hostname = "hostname "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "hostname"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 16 (Mod 2 Step 3)"
(GSI) INFO: instno = "0020239136"
(NT) Error: DOKCLU: normal NameTab from 20041108162211 younger than alternate NameTab from 20010201171049!
(SYSLOG) INFO: k CQF : DOKCLU&20010201171049&20041108162211& rscpgdio 47
(RSCP) ERROR: -
3-
(RSCP) ERROR: code: 64 RSCPECALL
(RSCP) ERROR: Altername NameTab too old
(RSCP) ERROR: module: rscpgdio location: 47 line: 2964
(RSCP) ERROR: TSL01: CQF p3: DOKCLU&20010201171049&20041108162211&
(RSCP) ERROR: -
myCluster (55.18.Exp): 897: received return code 64 from rscpCheckNTTimeStamps.
myCluster (55.18.Exp): 898: suspicious create timestamp of alternate nametab encountered.
myCluster (55.18.Exp): 902: create timestamps of nametab: 20041108162211; alternate nametab: 20010201171049.
myCluster (55.18.Exp): 294: error when retrieving physical nametab for table DOKCLU.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(DB) INFO: disconnected from DB
E:\usr\sap\BWA\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\BWA\SYS\exe\run/R3load.exe: END OF LOG: 20090209061749
Then I have followed the note and i have modified the environment variable with the value
I18N_IGNORE_ABAP_FEATURE = 20080303_N1148541
Kindly advice me on the same.Please give all your suggestions to ovecome from this error.
System Environments
SAP : BW 3.5
Database: MSSql 2005
OS: 64 Bit Ms Windows 2003 server
Regards
VijayDear,
Please check your Database is connected or not ,this is very critical error in the database.
please go through the SAP notes 738858 and 978244.
Warm Regards.
Mohammed Hassan Naveed -
Display Error Message in BW Report based on Customer Exit Variable
Hi
I need to display an error message in the BW report based on the value of a customer exit variable - i was able to do this successfully in BW3.5 using the below code.
WHEN 'ZUPN'. "Here ZUPN is the customer exit variable
IF i_step = 1.
<check for condition -- if successful, variable flag = 1, else variable flag = 0>
IF flag = 0.
MESSAGE e157(00). "Error Message
ENDIF.
ENDIF.
I have upgraded my system to BI 7.0 now. Whenever the variable check is not successful, it displays a blank screen instead of the error message in the report. Please advice if we need to change the code and how ??Bhanu,
Thanks for u r reply.This warning message appears every time i execute the report through portal.
Any idea ?
Regards
Mano -
Load from ODS into InfoCube gives TIME-OUT runtime error after 10 minutes ?
Hi all,
We have a full load from ODS into InfoCube and it was working fine till the last week upto with 50,000 records. Now, we have around 70,000+ records and started failing with TIME_OUT runtime error.
The following is from the Short Dump (ST22):
The system profile "rdisp/max_wprun_time" contains the maximum runtime of a
program. The current setting is 600 seconds. Once this time limit has been exceeded, the system tries to terminate any SQL statements that are currently being executed and tells the ABAP processor to terminate the current program.
The following are from ROIDOCPRMS table:
MAXSIZE (in KB) : 20,000
Frequency : 10
Max Processes : 3
When I check the Data Packages under 'Details' tab in Monitor, there are four Data Packages and the first three are with 24,450 records. I will right click on each Data Package and select 'Manual Update' to load from PSA. When this Manual Update takes more than 10 minutes it is failing with TIME_OUT again.
How could I fix this problem, PLEASE ??
Thanks,
Venkat.Hello A.H.P,
The following is the Start Routine:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BIC/AZCPR_O0400, /BIC/AZCPR_O0100, /BIC/AZCPR_O0200.
DATA: material(18), plant(4).
DATA: role_assignment like /BIC/AZCPR_O0100-CPR_ROLE, resource like
/BIC/AZCPR_O0200-CPR_BPARTN.
$$ end of global - insert your declaration only before this line -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
INCLUDE STRUCTURE /BIC/CS8ZCPR_O03.
TYPES:
RECNO LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
WITH HEADER LINE
WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING RECORD_ALL LIKE SY-TABIX
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
clear DATA_PACKAGE.
loop at DATA_PACKAGE.
select single /BIC/ZMATERIAL PLANT
into (material, plant)
from /BIC/AZCPR_O0400
where CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID
and ( MATL_TYPE = 'ZKIT' OR MATL_TYPE = 'ZSVK' ).
if sy-subrc = 0.
DATA_PACKAGE-/BIC/ZMATERIAL = material.
DATA_PACKAGE-plant = plant.
modify DATA_PACKAGE.
commit work.
endif.
select single CPR_ROLE into (role_assignment)
from /BIC/AZCPR_O0100
where CPR_GUID = DATA_PACKAGE-CPR_GUID.
if sy-subrc = 0.
select single CPR_BPARTN into (resource)
from /BIC/AZCPR_O0200
where CPR_ROLE = role_assignment
and CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID.
if sy-subrc = 0.
DATA_PACKAGE-CPR_ROLE = role_assignment.
DATA_PACKAGE-/BIC/ZRESOURCE = resource.
modify DATA_PACKAGE.
commit work.
endif.
endif.
clear DATA_PACKAGE.
endloop.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
Thanks,
Venkat.
Maybe you are looking for
-
hi ! i was wondering if someone has come up with a way of getting ical to show entire years. maybe a little help programm from the depths of the mac community ? thanks ! pia
-
Page navigation in Acrobat does not match page numbers in the document
I have a document in both Framemaker format (server.book) and PDF (server.pdf). When I view the pdf file in Adobe Acrobat, the page numbers appear correctly on the document itself, but up in the Page Navigation window within Acrobat the pages number
-
Logging Standards and ADF Application Log File on Standalone WLS
Hi Experts, I am using JDev - 11.1.1.5.0 and WLS - 10.3 Is ADF Logger the standard logger to be used in an ADF Application? If Yes, how to configure it? During development I simply used "System.out.println" for log messages and I was able to see the
-
Accessing SQL Server from Oracle
I found an article: http:www.databasejournal.com/features/oracle/article.php/3442661 It shows how to setup a connection from Oracle to SQL Server. I am new to Oracle Using SQL Loader and PL/SQL. I would like to use the SQL Loader in Oracle to load a
-
Standard SAP code is calling HTTP - want it to call HTTPS
We have recently switched our environment to HTTPS however some SAP code such as this: FORM get_url USING p_application CHANGING p_url. DATA: lw_application_name TYPE string. lw_application_name = p_application. CALL METHOD cl