Local SMTP/POP servers for Windows

Hi Guyz,
I know many of you would have got a similar situation..I need to write a code for sending and receiving emails. But I need a local smtp/pop server to test my code while development. I cannot use yahoo or any internet mail accounts as I do not have internet facilty at work. And I cannot use my company's mail server for sending due to security issues. But I can use them to receive the emails.
So I am looking for mail server for windows which I can use for testing during my development which should be free or open source(ofcourse) and light wieght(does not accupty much CPU utilization and memory).
Thanks,
Gokul

Hello,
I am in same situation like you.
If it's possible then plz send me your source code.
It's very very urgent.

Similar Messages

SMTP SSL Settings for Windows Livemail 2011

Hi
I'm trying to set up my mum's email settings but can't send emails out. I get two messages when I check or uncheck the SSL authentication boxes under the Tools - Advanced tab. These are apparently conflicting error message 530 and 250 (see below) one telling me to check th ebox for SSL authntication and then one saying the BT server doesn't support SSL servers. I have tried various combinations of checks and unchecks under the Server and Advanced tabs. Broadband Desktop gives up and sulks with script errors when I tried autofix. Any suggestions?
UNCHECKED:
The message could not be sent because the server rejected the sender's e-mail address. The sender's e-mail address was '**********@btinternet.com'.
Subject 'Test 3'
Server Error: 530
Server Response: 530 authentication required - Your email could not be sent. To fix this you must make a simple change to your email (known as SMTP authentication). For advice visit www.btyahoo.com/smtp
Server: 'mail.btinternet.com'
Windows Live Mail Error ID: 0x800CCC78
Protocol: SMTP
Port: 25
Secure(SSL): No
CHECKED:
The server does not support a SSL connection.
Subject 'Test 3'
Server Error: 250
Server Response: 250 8BITMIME
Server: 'mail.btinternet.com'
Windows Live Mail Error ID: 0x800CCC7D
Protocol: SMTP
Port: 25
Secure(SSL): Yes
Solved!
Go to Solution.

Magenta wrote:
Hi
I'm trying to set up my mum's email settings but can't send emails out. I get two messages when I check or uncheck the SSL authentication boxes under the Tools - Advanced tab. These are apparently conflicting error message 530 and 250 (see below) one telling me to check th ebox for SSL authntication and then one saying the BT server doesn't support SSL servers. I have tried various combinations of checks and unchecks under the Server and Advanced tabs. Broadband Desktop gives up and sulks with script errors when I tried autofix. Any suggestions?
UNCHECKED:
The message could not be sent because the server rejected the sender's e-mail address. The sender's e-mail address was '**********@btinternet.com'.
Subject 'Test 3'
Server Error: 530
Server Response: 530 authentication required - Your email could not be sent. To fix this you must make a simple change to your email (known as SMTP authentication). For advice visit www.btyahoo.com/smtp
Server: 'mail.btinternet.com'
Windows Live Mail Error ID: 0x800CCC78
Protocol: SMTP
Port: 25
Secure(SSL): No
CHECKED:
The server does not support a SSL connection.
Subject 'Test 3'
Server Error: 250
Server Response: 250 8BITMIME
Server: 'mail.btinternet.com'
Windows Live Mail Error ID: 0x800CCC7D
Protocol: SMTP
Port: 25
Secure(SSL): Yes
Hi. Welcome to the forums.
You are indeed not clicking the correct item in Windows Live Mail. You need to set the Secure (SSL) to no (i.e. untick that option), but make sure that (in the Servers tab/Outgoing Mail Servers) My server requries authentication is ticked.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

How I can disable Firefox from browsing Local drives of servers for remote desktop users in Windows Server 2008 R2 SP1??

Hi ..
Recently I came across a security hazard in firefox. it displays C and D rives content when "C:\" or "D:\" is typed in browser address bar. is there any workaround for restricting domain users to restrict this on firefox 12 ??
Thanks

Hiya,
It could sound like that one indeed. There are a few options to go for, however it should be fairly easy to find out :)
Create a test GPO and apply to a limited amount of users. GPUpdate and verify that the GPO has been applied using rsop.msc
Then open the application to test and see if it has the desired effect. You might need to change more than one setting, depending on the application and desired behavior.

Accessing local files in Safari for Windows

I am trying to access local files, such as .doc and .pdf files. I have tried
file://server/dir/dir/file.pdf, and various numbers of slashes, but all result in Failed to open page messages.
Any ideas? IE can do this, Firefox won't (easily).
Chris

If you wish to view "local" files in any browser just drag the file icon to an empty browser window.
The "file:///blah/blah" stuff and a URL has ended for security issues.

Setting mail with Cox (or other services with different servers for pop and smtp)

My Cox mail account uses different servers for pop and smtp (my personal ISP 1&1 does too).
The mail applet on my Blackberry Curve 8330 with Verizon does not allow to define different servers for pop and smtp, and further, for SSL smtp mail, the port is fixed at 995 and cannot be changed, while Cox (and 1&1) want to use 587 or something like that.
As a result, I can only receive mail with these services.
I also have yahoo mail, which works fine, so I can send mail with it and it is not a life-and-death situation, but I would like to be able to just reply to email sent to my Cox address.
I called Verizon and they said BlackBerry provides the mail access through their servers and the applet, so there is nothing they can do.
Is there a way to set it such that I can not only receive but also send mail through either of these services?
Thanks in advance,
Didier
PS: Other than that, the Curve on Verizon rocks!!! so much better down here than AT&T it's not even funny.

OK, thank you for the input.
The problem I have with this solution is like the one I have now using yahoo.
There are 2 problems:
1) mailing lists want the mail to come from the account that is subscribed, so if the cox account is subscribed, I can't contribute from the blackberry, and if the blackberry account is subscribed, I don't get my mail in Outlook. Neither is good for me.
2) people who send me mail to the Cox account and get replies from me from the blackberry continue responding to the account that can send from the blackberry (not Cox), and from that point on I do not have that mail on the computer.
The issue of having two copies is no big deal, I just delete the mail I do not need. I would rather have two than none.
Really, Blackberry should modify the email service so that they directly support mail systems like those of Cox and 1&1. I am sure there are others. They should also allow the use of another port for SSL than 995. I have not seen anyone using 995 for SSL.
Until recently, I had a BB provided by my employer, and we had a BES, and that worked really well. I would like to emulate as much of that functionality as possible without having to pay somebody another $10 or $20 a month just for the priviledge of having an account on a private BES server.
Anyway, thanks for the exchange and suggestions.
Didier

Apple software update for windows box that pops up changed to diff.language

Hey, Everyone. The little window that pops up for "apple software update for windows" and lets me know when I have an update for itunes, quicktime, etc. has changed languages. Now it shows up in Spanish. My itunes, quicktime, etc. are all in English, as well as my OS (Win XP,SP3) so I don't know how that one application could have changed. Luckily I can understand Spanish but just wondering if there's a way to change it back.
Thanks!

Hi Troy,
I had the same issue as you. All of a sudden the Software Update window was in swedish. After uninstalling and reinstalling ASU a few times I realised there was no need for it at all. All you have to do is go to Control Panel, Clock Language and Region, Regional and Language Options, Administrative, and then Change System Locale. I changed mine back to English (United States), restarted and voila, it was fixed! I hope this works for you too.
EDIT: Just noticed you are running XP. I am on Vista but it shouldn't be too different I suppose.
Message was edited by: Ben B Cruz

Jabber for Windows 9.2.5 Local Contacts

Hi Guys,
     By default, Jabber for Windows 9.2.5, when searching for contacts, it first lists the local Outlook contacts, and then it shows the list of Corportate Directory Contacts.
     Is there a way to show only LDAP contacts?? I don't want the list of local contacts to be available.
Best Regards,

In jabber 9.2 you should be able to change this behavior from the client as well.
http://tools.cisco.com/squish/c5cB2
Local Contacts in Microsoft Outlook
Cisco Jabber for Windows lets users search for and add local contacts in Microsoft Outlook.
To search for local contacts in Microsoft Outlook with the client, users must have profiles set in Microsoft Outlook. In addition, users must do the following:
    Select File > Options.
    Select the Integration tab.
    Select either None or Microsoft Outlook.
To add local Microsoft Outlook contacts to contact lists in the client, local contacts must have instant message addresses in Microsoft Outlook.
To show contact photos in the client interface, local contacts in Microsoft Outlook must have instant message addresses.
To communicate with local contacts in Microsoft Outlook using the client, local contacts must have the relevant details. To send instant messages to contacts, local contacts must have an instant message address. To call contacts in Microsoft Outlook, local contacts must have phone numbers.
An additional step if needed. If you add this line to the XML and the Outlook contacts still show, you may want to delete the cache in order to remove locally cached contacts.
This cache can be found under:
%USER_PROFILE%\AppData\Roaming\Cisco\Unified Communications\Jabber\CSF\
Hope this helps as well!

How to change font size and window size for a pop-up Message Window?

Hello,
I am trying to display a very important message to alert our tester or any user when there is an emergency and they have to stop the test they are doing. I really desire to use larger message window/fonts to do this.
I have tried Display Message To User and converted it to SubVI, but no luck yet. I thought SubVI might work. But when it's displayed, the original Pop-up Message Window sat right on the SubVI panel. When I then clicked OK to close the Message Window, it closed the SubVI panel as well.
Are Text Indicator and its Visible Node the only way to make this happen? If yes, could someone teach me how to pause the program execution like Display Message To User when the program is waiting for user to click OK to continue?
Thanks So Much!
Shun

Hello,
Why don't you create your own vi and customize it.
See the attached example made for you
Software developer
www.mcm-electronics.com
PS: Don't forget to rate a good anwser ; )
Currently using Labview 2011
PORTUGAL
Attachments:
Main4.vi ‏7 KB
messagebox.vi ‏15 KB

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

I upgraded to iOS8.1.3, and now when I attempt to backup my iPad to iTunes for Windows, it keeps popping up an error message

H. I upgraded to iOS8.1.3, and now when I attempt to backup my iPad to iTunes for Windows, it keeps popping up an error message "not enough space on the computer". There is over 130Gb of space! I have updated iTunes, but no change. Is it an issue in the iOS update? Or am I doing something wrong?
Would appreciate your guidance...
<Subject Edited by Host>

When you upgraded, itunes should have put a copy of the itunes library database in a folder named *Previous iTunes Libraries* . If you upgraded itunes today it will show as
iTunes Library 2010-02-28.itl
Use these directions to get it back
http://support.apple.com/kb/TS1967
Since I am not sure of your setup, look for the "Previous" folder on both your C: and F: drives.

Best practices for setting up virtual servers on Windows Server 2012 R2

I am creating a Web server from scratch with Windows Server 2012 R2. I expect to have a host server, and then 3 virtual servers...one that runs all of the web apps as a web server, another as a Database Server, and then on for session state. I
expect to use Windows Server 2012 R2 for the Web Server and Database Server, but Windows 7 for the session state.
I have an SATA2 Intel SROMBSASMR RAID card with battery back up that I am attaching a small SSD drive that I expect to use for the session state, and an IBM Server RAID M1015 SATA3 card that I am running Intel 520 Series SSD's that I expect to
use for Web server and Database server.
I have some questions. I am considering using the internal USB with a flash drive to boot the Host off of, and then using two small SSD's in a Raid 0 for the Web server (theory being that if something goes wrong, session state is on a different drive), and
then 2 more for the Database server in a RAID 1 configuration.
please feel free to poke holes in this and tell me of a better way to do it.
I am assuming that having the host running on a slow USB drive that is internal has no effect on the virtual servers after it is booted up, and the virtual servers are booted up?
DCSSR

I am creating a Web server from scratch with Windows Server 2012 R2. I expect to have a host server, and then 3 virtual servers...one that runs all of the web apps as a web server, another as a Database Server, and then on for session state. I
expect to use Windows Server 2012 R2 for the Web Server and Database Server, but Windows 7 for the session state.
I have an SATA2 Intel SROMBSASMR RAID card with battery back up that I am attaching a small SSD drive that I expect to use for the session state, and an IBM Server RAID M1015 SATA3 card that I am running Intel 520 Series SSD's that I expect to
use for Web server and Database server.
I have some questions. I am considering using the internal USB with a flash drive to boot the Host off of, and then using two small SSD's in a Raid 0 for the Web server (theory being that if something goes wrong, session state is on a different drive), and
then 2 more for the Database server in a RAID 1 configuration.
please feel free to poke holes in this and tell me of a better way to do it.
I am assuming that having the host running on a slow USB drive that is internal has no effect on the virtual servers after it is booted up, and the virtual servers are booted up?
There are two issues about RAID0:
1) It's not as fast as people think. So with a general purpose file system like NTFS or ReFS (choice for Windows is limited) you're not going to have any great benefits as there are very low chances whole RAID stripe would be updated @ the same time (I/Os
need to touch all SSDs in a set so 256KB+ in a real life). Web server workload is quite far away from sequential reads or writes so RAID0 is not going to shine here. Log-structures file system (or at least some FS with logging capabilities, think about ZFS
and ZIL enabled) *will* benefit from SSDs in RAID0 properly assigned.
2) RAID0 is dangerous. One lost SSD would render whole RAID set useless. So unless you build a network RAID1-over-RAID0 (mirror RAID sets between multiple hosts with a virtual SAN like or synchronous replication solutions) - you'll be sitting on a time bomb.
Not good :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

MacAir - error message "This version of itunes has not been correctly localized for this language. Please run the english version" Saw other answers for windows users, I have a MacAir. never used any other language but English

Trying to open iTunes - get an error message saying "This version of itunes has not been correctly localized for this language. Please run the english version" Saw other answers for windows users, I have a MacAir. never used any other language but English so I have no clue what the problem is. I just want to update my phone and back it up.

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

Photoshop CS4 Help Window Pops Up For No Reason

This same thing was happening in Photoshop CS3 and I could never figure out why. I figured that since CS4 was coming out, I would buy it, stop using CS3 and the problem would be solved, well it's not. So far, I'm happy with the new program but for some reason, out of nowhere, while working on a photo, the Photoshop Help window (which opens as a web browser window) will pop up for no reason! Today, it popped up over 6 or 7 times and I nearly had to crash the program to get it to stop. I figured this problem would have been solved with the new version since the same thing was happening in CS3 but it hasn't. I'm running a Windows XP-based machine that I built myself about 2 years ago. I have a 512mb ATI Raedon X1650 video card and have 4GB of RAM so this machine has far more than enough power to run the program. I updated my video and mouse drivers prior to installing the program. Anyone else have this problem?

Thanks for pointing that out. It really happens very rarely, but when it happens, it's quite a huge annoyance.
Well I have about 3,5GB RAM on a Windows Vista 32 Bit system (hence just 3,5 instead of the full 4GB), with the OpenGL options activated, and maybe over 100GB of free HD space (that'll never be a problem, but since swapping is not used by all modules, I often bump into RAM problems when using tools like auto-aligning layers or stitching panoramas) and 2,5Ghz core duo on a notebook. The Windows swap file is also "just" 4GB...but I found more than 4GB to be a bit extreme.
RAM usage is set to 56% right now (916MB), cache levels is set to 6
After restart, everything runs fine again, I hope the help screens leave me alone.
I didn't know this is since v. 7! I worked with all versions since 5.0 and since becoming a freelancer also bought every version since 6.0 except 7. I only experienced this bug in this and the previous version. Maybe my hardware doesn't keep pace with PS anymore

Local Database Options for Windows Store Apps

I am looking to create an application that will allow for entry of data from a user and write it to a database file system locally within the application.
I am new to Windows Store type app development and are a senior developer for ERP systems for the enterprise which have rich databases and client apps that are built with a MVC type configuration. The app communicates with the database which is on the DB
server (Oracle, IBM DB2, or SQL Server) and writes to the file system.
For my startup applications I would like to have a simple CRUD type interface that writes to a DB that is part of the application and does not require a connection to a file server or DB server. Internally I would like something with a few tables,
etc.. that I can write to and then report from locally.
In the Windows 8x development world, what is the best method and technology to use for Store Apps for this scenario? What is the best approach?
Mike

There is SQLite for Windows RT and Windows Phone.
Search "SQLite" in vs extensions and updates

Console Window keeps popping up for one second then vanishes before I can read it

a console window (with white letters on a black background) keeps popping up for 1 second and then vanishes before i have time to read it - How can i
stop that, or how can i capture what is written on the console before it disappears (so that I can troubleshoot it)?
I use as x64-bit Windows 8 pro Lenovo T430s.
Thanks in advance,

Thanks Andre,
I ran ProcMon and went to the ProcessTree window, but could not find any cmd.exe there (and hence could not see the commandline). (I also watched the video about ProcMon).
The closest I could find in the ProcessTree window was conhost.exe, with commandline showing:
\??\C:\windows\system32\conhost.exe 0x4
I saved the capture trace, at:
http://sdrv.ms/14Dfvjs
Do you see any other leads in there that I could work on?
In the result column, I noticed some "buffer overflow" and "name not found", many associated with "tunmgr.exe" the Blackberry Link Communications Manager.
I also noticed that in the ProcessTree Window, the only two process lines with an End Time are tunmgr.exe and conhost.exe.
the respective command lines are:
for tunmgr.exe:
"C:\Program Files (x86)\Common Files\Research In Motion\Tunnel Manager\tunmgr.exe" -Embedding"
for conhost.exe:
\??\C:\Windows\system32\conhost.exe 0xffffffff
- could that be it?
If so, how could one fix that ?

Local SMTP/POP servers for Windows

Similar Messages

Maybe you are looking for