LocalDrive, remoteDrive error being logged to Windows Application event log
Post Author: yday
CA Forum: Data Integration
Hi all,We are finding the following error messages being constantly logged to the Windows application event log:Event ID: 4096Source: Data Integrator"The error: localDrive: LocalDrive1; localDriveValue: "andEvent ID: 4096
Source: Data Integrator
"The error: remoteDrive: RemoteDrive1; remoteDriveValue: "Another user noted as having the same problem in the old BO Support Forum:http://support.businessobjects.com/forums/message.asp?fid=568&mid=171195 We are also running Data Quality XI R2 (11.5.1.0) on the same server. This problem has been happening for as long as I can remember. It does not appear to cause any jobs to fail, but we would like to resolve this to prevent error messages being logged to computer management. Can anyone suggest a solution? Product: Data Integrator XI R2
Version: 11.7.0.0
Patches Applied: None
Operating System(s): Windows Server 2003 w SP1
Database(s): Oracle 10gR2
Error Messages: remoteDrive, localDrive error (as above)Steps to Reproduce: Restart the job server and the error appearsThanks and regards,York DAY
Post Author: yday
CA Forum: Data Integration
Ben,
I have just installed DI 11.7.2.0 and it is still an issue! The bug has not been listed in the release notes in either the resolved issues section, or the known issues section.
Australia support told me it would be fixed in the next service release. This was well before 11.7.2.0 was released.
I've opened another support case as I closed the last one, believing it was resolved. From our perspective, it is not even being shown as a known issue with the product at this stage - so I will be keeping my support issue open this time until I see it is fixed.
My support case number is 302810798 FYI.
Rgds,York
Similar Messages
-
Constant event error being logged during video capture
I recently upgraded my version of Premiere Pro to version CS4. When I now perform a video capture from my DV Device, I get the following error logged in the event window: "file is busy, and couldn't be updated". Until the first logging, there is no RED X in the bottom right corner. Upon the first log, the RED X appears in the bottom right corner.
As far as I can tell, the event error occurs immediately after a scene download has been completed and the next scene is initiated.
The camera I am using is a MiniDV camera (not HD) and it is not listed in the device table within Premiere (Panasonic PV-GS500). I have Premiere's device set to Standard Panasonic and have also tried each of the Alternatives (1,2,3,4 and 5).
Can anyone please help me understand what this error/event means as Adobe is somewhat prehistoric when it comes to providing definitions.Several possible causes:
1. You are not running as administrator or with administrative rights.
2. You use Win7 and your firewire driver is not the 'Legacy' one. See Adobe Forums: Can not capture under Win7
3. Background processes are getting in the way.
Possible solution:
Try Scenalyzer Live for capturing SD material. Better, more reliable and with more features than CS4. -
Hi all,
I am using System Center 2012 R2 Operations Manager with the Key Management Service Management Pack at version 6.0.7234.0, and I keep receiving the following alert in Operations Manager:
"Idle Minutes Monitor Alert:
Key Management Service (KMS) inactivity exceeded threshold
Knowledge:
Summary:
The purpose of this rule is to alert system administrators to a possible KMS or network outage. This rule monitors the end-to-end operation of KMS activation. A notification event is created by KMS if no activation or renewal requests were logged by KMS
(activity event 12290) in the specified time interval. In addition to new activations, periodic renewal requests are expected to occur (default is 7 days). Whether or not this alert is serious depends on the number of machines in the KMS environment, how many
are actually connected, and the configured renewal interval.
Causes:
Any failure or incorrect configuration of the KMS service, other Windows components, firewall, hardware, network or routers can trigger the Idle Minutes Alert. This alert can also result from normal behavior, since it is possible that not enough machines
attempted to activate or renew during the specified time interval.
Resolutions:
The first step is to determine whether there really is a problem. Start with a known good KMS client and run (with elevated privileges) the script slmgr.vbs -ato . If the activation/renewal fails, it will report an error code. You can direct the client to
connect to a specific KMS machine by using the slmgr.vbs -skms option. The request event (12288) and response event (12289) in the Windows Application event log may provide additional information, including the identity of failing KMS machines. If there has
been a failure, check the following:
Software Licensing service (slsvc) is running.
Other KMS machine behavior is normal.
KMS firewall port is open (default is TCP 1688).
Attempt to connect to KMS using telnet to the KMS port(you won’t be able to do anything other than connect)
Use a network monitor (e.g. netmon) to capture and trace network problems.
There is one Idle Minutes Monitor that is used to monitor for activity. It may be desirable to adjust the time threshold, depending on expected KMS activity."
Despite what the alert says, there are activity events with ID 12290 being logged, but they are appearing under the 'Key Management Service' log instead of the general 'Application' log. I know that my clients are activating with the server without
any problems as I have run slmgr.vbs -ato with success on a number of them, and none are stating that activation is required. This issue was previously raised here:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/1391acf8-f0be-4a48-9039-8d24e275f1fd/kms-idle-time-monitor-raise-wrong-alerts?forum=operationsmanagermgmtpacks, but I am running Windows Server 2008 R2 SP1 and the hotfix KB981314 comes
up as 'not applicable to this computer' so I assume it is part of SP1 now. I have also tried installing KB2692929, as that was cited as being a possible fix here:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/8ec8ae5b-a310-4b0f-9a5f-e0599bceb93a/kms-managementpack?forum=operationsmanagermgmtpacks, however I am still seeing the same alerts.
Would greatly appreciate any further suggestions!
Many thanksHi,
I've checked for all the events that are generated by our servers, and there are periods of time where no requests are received for up to 18 hours, so that is no doubt why the alerts are appearing (we then sometimes see five requests in the same minute,
but there we go). I'll need to adjust the thresholds.
Thank you for your help, Chunky.1, I'll mark your reply as the answer, as it was very helpful in understanding the alert.
For anyone else who needs to check this, create a PowerShell script using the following content, and place your own details into the relevant sections in bold (without the brackets, of course). This will generate a csv file which will have the server
name in one column and the time that the request event was generated - you can then check the gaps between the requests. The script is quick and dirty, with no checks along the way, so feel free to embellish it as required.
Out-File "<directory to place file in>\KMS_check_results.csv"
$results = get-eventlog -ComputerName <KMS server hostname> -logname 'Key Management Service'|where{$_.message -match "<String which identifies servers instead of clients>"}
$filteredresults = @()
foreach($event in $results){
#This splits up the message into sections, separated by commas, and places each section as an element in an array
$event.Message -split ","|foreach{
if($_ -match "<server domain suffix - e.g. contoso.com>"){
$eventserver = $_
$timegenerated = $event.TimeGenerated
$filteredresults += New-Object PSObject -Property @{
Server = $eventserver
TimeGenerated = $timegenerated
$filteredresults|select-object server,timegenerated|export-csv "<directory to place file in>\KMS_check_results.csv" -NoTypeInformation -
Errors not logged when IKM Oracle Multi Record Insert is selected
Dear All,
I am new in ODI 11g and I am facing the following problem:
I created a package with 3 Interfaces with Oracle Multi Record Insert.
In the first interface I load the source data to a temporary target
In the second interface target#1 table is loaded using interface#1
In the third interface target#2 is loaded using interface#1 and the multiple insert is executed and committed.
This works correctly, but when a data error occurs (e.g. mandatory column is null), instead of the error being logged in the Error table, execution of the last interface fails with the following error:
Caused By: java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into (<schema>.<table>.<column>)
I noticed that when I use Oracle Incremental Update instead, the errors get logged correctly in the error table.
Does anyone know what could be causing this?Hi Bhabani,
Thanks for the reply.
I am afraid that this is a major issue for me, I do not want to re-query the source table for each target table, but on the other hand I cannot fail the process for each invalid record and I need the logging.
Can you think of a workaround for my use case?
Thank you! -
Fatal Error has occured and the application is being terminated
It seems that Captivate is eating my projects. I've started my second project (after completing my first without any errors) and I'm constintly getting corrupted files. It set me back at least a few hours worth of work. So I started creating backup files every 10mins, regardless of how much work i've done. Everything was going fine, until I took an hour break and went to resume my work.
When I try to open my file I get the following pop up message when trying to open my file: "Adobe Captivate - A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folder as .cpbackup files. Please restart Adobe Captivate."
I can click on the program workspace and not click ok on the error message to keep the file open. I see my slides and objects, but all the text is missing.
I'm using Captivate 5.5 and windows 7 64. Within Captivate, I'm using standard objects with importing MP3 audio files and some Photoshop images. I have a total of 4 slides with 1 being 3.5mins long and the rest are less than 1min.
When I first started having this problem, I thought maybe the variable files were corrupte so I deleted the Users/name/appdata/local/adobe/Captivate5.5 directory to see if that was the issue. That was before this last stint of errors.
I tried opening a backup that was like 10 saves ago, but it displays the same message.
I'm not sure what to do next.Failed to back up the data. A fatal error has occured and the application is being terminated.
This question is Not Answered.(Mark as assumed answered)
hi,
I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
Adobe Captivate
A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
Please restart Adobe Captivate.
OK
I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
Please help me out to deliver my work.
Thanks
CD -
Got a new MacBook Pro and migrated my settings and applications from old computer. Reinstalled Microsooft Office from a disk, after I opened a document and it said I was missing some software components. Now when I open any office application, I get:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_CRASH (SIGTRAP)
Date/Time: 2014-01-19 23:31:24 +0000
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.3.9.131030
Crashed Module Name: merp
Crashed Module Version: 2.2.4.131030
Crashed Module Offset: 0x00004422
Blame Module Name: MicrosoftSetupUI
Blame Module Version: 14.3.9.131030
Blame Module Offset: 0x0000e516
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0Hi,
Do you get the error message like "Office <Update version number> can't be installed on this disk. A version of the software required to install this update was not found on this volume. To learn how to fix it this issue, see "I can't install Office
for Mac updates" at http://www.microsoft.com/mac/help.mspx."
If it was, please follow the kb to fix the issue:
http://support.microsoft.com/kb/969065/en-us
Then, here is a forum for Office based on the Windows operation system, we are lack of the source about the Office for mac, you'd better post your question to Answers forum:
http://answers.microsoft.com/en-us/mac/forum/macoffice2008?tab=Threads
Regards,
George Zhao
TechNet Community Support -
I was trying to capture a simulation when a pop-up window came with this error:
"A fatal error has occurred and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.Please restart Adobe Captivate."
I tried every possible solution but i am getting the same error. Even now, i am not able to open a blank project. I cleared Preferences and Cache, Restarted the system, uninstalled and re-installed captivate but the error occurs.
Please help.Having admin rights is not the same as 'Run Captivate as administrator'. For the last, right-click on the start icon for Captivate and check 'Run as administrator'. Or click on Advanced, where you can check the option to always run as administrator.
Another possibility could be a corrupt font somewhere. I forgot to ask which version you are using (exact number). -
Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.Consider MS System Center 2012.
Rgds -
hi,
I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
Adobe Captivate
A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
Please restart Adobe Captivate.
OK
I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
Please help me out to deliver my work.
Thanks
CDWe have the exact same problem.Renaming the backup file per this post http://forums.adobe.com/message/4055726 didn't work. I can open the file and see the text boxes even though they're now showing as empty. Is there any way to recover the file?
Yes, we were using a network drive but now we've switched to locally stored content. -
I am trying to burn a music cd on iTunes, but I am getting an error that reads that the cd burner is being used by another application. I know that I am not using the cd burner for anything else. I have restarted the Mac and nothing. Any ideas?
One other thread said it was fixed by waiting till prompted by iTunes to insert the blank disk, instead of putting it in first. Does that work? Found a number of hits on this Googling.
-
Ipad is not being recognized by Windows..I get a Code 43 error on any USB port I try. I have rebooted, restarted, blah blah til I am blue in the face. This is an Ipad not an Ipad2...I can't get this thing recognized by either my desktop or laptop. It used to work...not now.
Any ideas?Did you already have a look at this article?
iOS: Device recognized in iTunes for Mac OS X -
how do i sort out error r6034 on my windows vista when i try to start itunes ???
the message box is from microsoft visual c++runtime library, it says an application has made an attempt to load the C runtime library incorrectly, P;ease contact the application's support team for more information.Hey deepakmenonfrompune,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M. -
My computer (Win 7) recognises my ipod but when Itunes is automatically started the ipod is removed from "my Computer" and is not recognised in itunes, my device manager states he device is being "uninstalled by window" error 21, what is happpening.
Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock -
I've copied a .NET application from an older 2008 server running IIS 7.0.600.16386 to a newer 2008 R2 server running 7.5.7600.16385. The .NET framework version is 4.0.30319. I've setup an application pool and copied the wwwroot directory.
I've checked for nested web.config files and I've been reading a lot about converting the site to an application. The older server running the application is still up and running and the configurations look identical. If I convert the site to an
application the icon changes and doesn't look like it does on the old server. I'm new and still learning the basics of programming and publishing applications. Can someone point me in the right direction? I've been on google for a few days
to no avail. Thanks.
Description:
An error occurred during the processing of a configuration file required to
service this request. Please review the specific error details below and modify
your configuration file appropriately.
Parser Error Message: It
is an error to use a section registered as
allowDefinition='MachineToApplication' beyond application level. This error can
be caused by a virtual directory not being configured as an application in IIS.
Line 20: <add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false" />
Line 21: </httpHandlers>
Line 22: <authentication mode="Forms">
Line 23: <forms cookieless="UseCookies" loginUrl="~/AccessDenied.aspx" protection="All" name="TVHRFORMAUTH" timeout="180" slidingExpiration="true" />
Line 24: </authentication>Hi,
I agree with Tim that we can ask for better help in the following IIS forum.
IIS.NET forum
http://forums.iis.net/
Best regards,
Frank Shen -
Oracle 11g R2 write audit record to application event log in Windows server
Hi,
I have a oracle 11g R1 database in windows 2003 server,
I set the init parameter audit_trail=db,extended,
but some auditing record still keep writting to windows application log
Event Type: Information
Event Source: Oracle.test
Event Category: None
Event ID: 34
Date: 9/7/2011
Time: 3:36:38 PM
User: N/A
Computer: test
Description:
Audit trail: LENGTH: "226" SESSIONID:[7] "3875588" ENTRYID:[1] "1" USERID:[8] "test" ACTION:[3] "102" RETURNCODE:[1] "0" LOGOFF$PREAD:[1] "1" LOGOFF$LREAD:[3] "755" LOGOFF$LWRITE:[2] "26" LOGOFF$DEAD:[1] "0" DBID:[10] "1613217480" SESSIONCPU:[1] "0".
Is there any way to disable this?
Thanks
Vincentoh really, dont you say?
maybe next time read the whole note, not just the title
"In 11g these 'logoff by cleanup' audit records are not logged in DBA_AUDIT_TRAIL. The connection record remains as 'logon' record. It is not updated to 'logoff by cleanup'. *In these cases, the log off information like logoff_time, logoff_lread etc are written to an OS audit file as 'logoff by cleanup' audit record.* "
Maybe you are looking for
-
In the olden days - when I had a windows operating system, I used to import Clipart icons/pics/cartoons into simple documents. What free alternatives are there for simple informal documents? I'm just a simple home letter writer so no complex solution
-
How do I turn off part repeat in record?
Hi this is probably very simple but it's driving me nuts. Every time I record a software instrument part it repeats that recorded part in loop mode until the end. How do I turn this function off? thanks for any help.
-
How to create CAP file based on a J2ME project ?
Hi all, Recently I need to install a midlet application into the sim card with an applet loader. And it requires a java card cap file. I already installed: 1> JAVA Card Kit 2.2.2 2> JDK 1.6.0_01 3> J2ME Wireless Toolkit 2.2 4> Eclipse 3.2 But I don't
-
Blank Page at the end of the report
Hi In my report i did not have any pagebreak or section break. But some times i am getting extra blank page at the bottom of the report . How to avoid this .. Thanks in Advance Have a Nice day.
-
Free up RAM on Fascinate?
Hello, Is there anyway that I can free up RAM on the fascinate? For some reason I am using 269mb out of 325mb anyone know why so much RAM is being used? I am new to all of this so any reply is greatly appreciated! Thank you!