Log capture will not stop

Can someone help when I log and capture all works OK but when I press escape it will not stop capturing no matter what I do, I have even tried swapping keyboards can someone help
Thankyou
Jenni

OK, first some basics
1. trash FCP prefs
2. Run Disk Utility and Repair permissions and Repair Disk
3. check you system prefs, make sure that your energy saver settings are so that the system stays awake and disks do not power down.
4. FCP prefs will need to be reset, if you are using capture now, check that it not limited, reset you drives and etc.
5. Try capturing using log clip and a short piece.
6. try capture now.
7. oh and check that the codec of the caerma/tape is the same as that you are capturing with.
As I said, some basics to start with

Similar Messages

  • Log & capture "will not open "

    I'm new to this so "HELP " . Ever since I upgraded to Tiger 10.4.6, I go into Final Cut Pro "4". In my log & Capture no matter what configure I use It does not let me in (no video from camcorder (sony vx-2100 ) . This problem never occured before I upgraded to Tiger & Quick tim 7. I'm thinking I should "DOWN GRADE " back to panther . Thanks Joepa 1 !!
    g-4   Mac OS X (10.4.6)   10.3.7 to 10.4.6 (that is when the problem began

    Try trashing your preference files. Do a search for
    final cut pro rescue. its an app that will do it for
    you that you can download for free
    I have the rescue down lode I hate to ask but were can I find my preference files to trash ? Thanks again .

  • Rebuilding aMacBook 1.83 GHz Intel Core Duo, hard drive failure so rebuilding system.  Aircard will not stop self-assigning IP address.  Any ideas how to resolve successfully?

    Had hard drive failure on MacBook 1.83 GHz Intel Core Duo, so had to rebuild the OS on new drive. Was on Lion 10.7.5 prior to failure, but had to reinstall Snow Leopard 10.6.3 since that was most recent OS on media I had.  After finally getting ethernet connection to router working, was able to get to internet and download / upgrade to 10.6.8.  I assume I can probably buy the upgrade to Mountain Lion 10.8 from there.
    Problem is this, Airport will not stop self-assigning IP address for my wireless connection, and unless I can get wireless back on this laptop, doesn't make a lot of sense to continue the rebuild and reinstall of all the software that was on it prior to HD failure.  Only way to my home network and router is ethernet now.  Everything else on my network (Apple MacBook Pro laptops, iPhones, desktops, and non-Apple printers and laptops) is hooking up to router wirelessly fine.
    Any ideas how to resolve successfully so that the airport will stop self-assigning and allow the router to assign the IP address?

    When see the beachball cursor, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Dock icons will not stop running

    The icons on my dock will not stop running. They have the small blue light under them when in use but the light does not go off when I close the program. I have been quitting them by holding down the curser on the icon until menu comes up to quit. Help, please. Thanks, Arudi

    yup. bizarre. logged out of MobileMe and I try to move the Keychain Icon from the third on the left to the last on the right and -whoooo-oop - it slides back to the left. no fun. like having a gremlin moving books around in my library or something...

  • Mail will not stop fetching

    I have 3 accounts set up in my Mail app. Two with Charter and the other is my work POP account. My work POP account will not stop fetching. Mail will not allow me to quit the program other than with a force quit. Is there a way to trash Mail preferences with out deleting the accounts? I have ran Disk Utility and used Cocktail to clean the cache files but it still hangs up.
    I also got the new iPhone this weekend and unlike with my BlackBerry, if Mail is not working correctly on my laptop, then no mail is sent to my iPhone? I really don't understand that but I'm trying to address the first problem first then I tackle that issue.

    Okay, I figured it out. The port number had gotten changed? I logged in to my work station to check the settings and they were different. Odd. I didn't change anything. I really don't monkey around with my computer much. However, we did update mail servers at my work and remember about 3 weeks ago it asked me something about the certificate so I wonder if my response made some sort of change. Oh well, live and learn. Now figure out my iPhone!

  • I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

    I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

    Hi
    Secure Zone login feature will only work if you host your website with Business catalyst.
    Please take a look to this as an alternative
    Password Protect Pages Widget for Adobe Muse
    Also, check this thread,
    Re: Can I create a login/password protection in Muse for a HTML5 page or two?

  • My ipod touch will not stop playing music

    My ipod touch will not stop playing music. I will pause the music, leave the playlist, and after 30-60 seconds, the music starts playing again. I use my ipod when I run and when I drive (hook it up to the stereo). It is very annoying when I stop to take a phone call or listen to directions, turn off my music, and then hardly a minute into my stop, the music starts right back up again.

    FUEL1996, not correct. Apple does not allow one app to control another app.
    laurathecellist
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              

  • HT5577 Okay so I have 2 apple accounts. One is newer & one is my old one. The older one still has money from Itunes on it & when I go to log it will not except my password. Then it asked me my date of birth & it says its incorrect. What do I do?

    Okay so I have 2 apple accounts. One is newer & one is my old one. The older one still has money from Itunes on it & when I go to log it will not except my password. Then it asked me my date of birth & it says its incorrect.So I tried to go the email route but i never get anything in my email about recovering my password. What do I do?

    Hey donnieandjamie31,
    It sounds like you are not getting the email to reset your password.  If you have a rescue email setup for your Apple ID, the reset password email will be sent there and not your Apple ID email address:
    When you provide a rescue email address, all future security emails, such as password resets from iForgot, will be sent to the address provided.
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    You might want to check your other email accounts for the password reset email, including their Spam folders. If you continue to have issues, please contact our Account Security Team:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Itunes 10 will not stop auto syncing

    I have itunes 10 on a mac and a 160 gb ipod classic.
    it will not stop auto syncing when I plug in my ipod, even though "do not auto Sync" button is checked as well as checking off "do not open itunes automatically.
    It syncs FOREVER. I would love to find a way to stop this from happening. I dread plugging in my ipod to put on new music etc.

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • Image Capture will not recognize my Epson Workforce 615

    Image Capture will not recognize my Epson Workforce 615. It would not recognize my HP 4280 either.
    I can print but I cannot scan using Image Capture. Scanning through Epson scan or HPScan Pro works.
    What am I doing wrong? I have searched all over the net for an answer and there does not seem to be a solution. Only other people searching for the same answer.
    And no I do not want to use VueScan.
    Thanks!

    Thank you for your quick reply. I ran all of the updates and the software is current.
    Image Capture recognizes the printer/scanner via USB but not WIFI.

  • My data wheel will not stop spinning (i think i am being tapped)

    iphone 3GS 3.1.3 16gb white not jailbroken completly stock
    ok every time i open up my native phone app the data wheel instantly starts spinning and will not stop. it does stop as soon as i close it.
    i thought it might have something to do with google sync so i deleted my mail account but it did not help aat all
    PLease help this is driving my crazy

    Perhaps it's trying to access your voicemail. Is that working properly? Does the Phone app work?
    Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • ITunes will not stop verifying

    I have an iPhone4 with the latest iTunes (10.1.0.54) and when I plug my iPhone4 in, it will not stop verifying. I used to have this problem if I canceled a sync. It would verify the phone the next time I plugged it in. I did that this time. I canceled a sync, but now it will not stop verifying to do anything else. I have left it plugged in for 14 hours and it just verifies the entire time. I can do nothing else. It is not set to sync automatically. How do I stop this?

    I'm having the same problem, but I've got a MacBook Pro (rather than a PC).
    Not only does it continue to 'verify' but it won't even let me force quit (says it's restoring my phone ... but after a number of hours it must be done already).

  • Whenever I open Firefox a series of sirens start and will not stop. Does not happen in Internert Explorer.

    When Firefox is opened a series of sirens starts and will not stop until Firefox is closed.
    == This happened ==
    Every time Firefox opened
    == started when I opened a news story from the Sacramento Bee News Paper on line. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.1)

    That is an issue with the "Cool Previews" extension.
    See [tiki-view_forum_thread.php?locale=en-US&comments_parentId=678288&forumId=1]

  • Ever since I upgraded to 4.0, the welcome tab will not stop opening. It's getting rather annoying.

    The welcome tab for the new 4.0 will not stop opening every time I open my browser. Each time I open Firefox two tabs open, the welcome page for the new 4.0 and my home page. I updated some time ago and this welcome page is becoming quite annoying. How do I stop it from opening? In the past, it has stopped after the first time I open Firefox following an update.

    Thank you for the reply. I have Google set as my homepage, and that's the only homepage listed in the Options box. I tried restoring to default, but when I opened again, the 4.0 page and Google opened again. That leads me to think it might be options, but that article meant absolutely nothing to me.
    What I find strange is that when I have one Firefox window open, then open another Firefox window, only the Google page opens, not the "get to know 4.0" page.

  • Distiller will not stop distilling postscript file

    I use Distiller 6.0.2. Lately, when I try to distill a Quark layout into a pdf the distilling process will not stop. The progress bar shows a number that just keeps on climbing up. It seems if I quit the program and then restart it, this will solve the problem and distiller will make a pdf of the postscript. However, I will get the same problem once I try to distill another page. I tried to trashing the Distiller preferences and then restarting the program. This did not do anything.

    It's not a specific file and it doesn't matter how big a file is. I am distilling a postscript file. My Mac is running on 10.3.9. I only print from Quark to get postscript files.

Maybe you are looking for

  • Counting words in a textfile

    Hello I am trying to make a program that counts the number of words in a textfile specified below - later i will make it so you can choose the textfile. When I try to compile this I get the errors: java:23: char cannot be dereferenced                

  • Sales purchase Transactions.

    Dear Guru's, Please Tell me the implcations of the Sales Purchase transaction. How does it effect the Accounting (FI) Customer No attched to Vendor Control Data and the Vendor Control data has the Customer Code data. regards, SAP SD

  • Authorization of goods issue at shop floor.

    Hi PP Gurus, I am mapping the process & get lured into the authorization of goods issue of RAW materials. After MRP run PR are automatically created for RAW materials due to 'control parameters' settings in MRP run screen. Now at the time of Producti

  • Map mapping / UnsupportedOptionException

    Hello, I've got a strange exception while trying to map a Map field. We have a LongHist class which is extending TreeMap<Long, Double> and offering a few usefull methods. This LongHist is a field of another class, and is mapped as a Map. this throws

  • Helper address IOS XR ASR9000

    Hi Everyone I have a doubt about the configuration for the helper address on ASR9000, mainly I try to configure the helper address in this way: configure interface type number ipv4 helper-address vrf vrf_name address  However it doesnt work. What is