Log Corruption Issue

I erceived the following error in my alert log file:
Errors in file /app/oracle/diag/rdbms/peptest/PEPTEST1/trace/PEPTEST1_ora_8981.trc (incident=651420):
ORA-00353: log corruption near block 79361 change 6409669490 time 07/17/2013 11:59:33
ORA-00334: archived log: '+FLASH/peptest/archivelog/2013_07_17/thread_1_seq_118356.469.821016003'
ORA-07445: exception encountered: core dump [kzvd_objprivCheck()+1622] [SIGSEGV] [ADDR:0x38] [PC:0x193ECBE] [Address not mapped to object] []
Incident details in: /app/oracle/diag/rdbms/peptest/PEPTEST1/incident/incdir_651420/PEPTEST1_ora_8981_i651420.trc
The database version is Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production running on Linux wwhpepotst1 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux.
This is a RAC database with ASM.
The following is the extract from the trace file:
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x38] [PC:0x193ECBE, kzvd_objprivCheck()+1622]
Incident 651419 created, dump file: /app/oracle/diag/rdbms/peptest/PEPTEST1/incident/incdir_651419/PEPTEST1_ora_8981_i651419.trc
ORA-07445: exception encountered: core dump [kzvd_objprivCheck()+1622] [SIGSEGV] [ADDR:0x38] [PC:0x193ECBE] [Address not mapped to obj
ect] []
Incident 651420 created, dump file: /app/oracle/diag/rdbms/peptest/PEPTEST1/incident/incdir_651420/PEPTEST1_ora_8981_i651420.trc
ORA-00353: log corruption near block 79361 change 6409669490 time 07/17/2013 11:59:33
ORA-00334: archived log: '+FLASH/peptest/archivelog/2013_07_17/thread_1_seq_118356.469.821016003'
ORA-07445: exception encountered: core dump [kzvd_objprivCheck()+1622] [
Can I please have a suggestion on how to procced with resolving this issue?

submit Service Request to My Oracle Support

Similar Messages

RMAN-05501: RMAN-11003 ORA-00353: log corruption near block 2048 change

Hi Gurus,
I've posted few days ago an issue I got while recreating my Dataguard.
The Main issue was while duplicating target from active database I got this errors during the recovery process.
The Restore Process Went fine, RMAN Copied the Datafiles very well, but stop when at the moment to start the recovery process from the auxiliary db
Yesterday I took one last try,
I follow same procedure, the one described in all Oracle Docs, Google and so on ... it's not a secret I guess.
The I got the same issue, same errors.
I read soemthing about archivelogs, and the Block corruption and so on, I've tried so many things (register the log... etc etc ), and than I read something about "catalog the logfile)
and that's waht I did.
But I was just connect to the target db.
contents of Memory Script:
set until scn 1638816629;
recover
standby
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 14-MAY-13
starting media recovery
archived log for thread 1 with sequence 32196 is already on disk as file /archives/CMOVP/stby/1_32196_810397891.arc
archived log for thread 1 with sequence 32197 is already on disk as file /archives/CMOVP/stby/1_32197_810397891.arc
archived log for thread 1 with sequence 32198 is already on disk as file /archives/CMOVP/stby/1_32198_810397891.arc
archived log for thread 1 with sequence 32199 is already on disk as file /archives/CMOVP/stby/1_32199_810397891.arc
archived log for thread 1 with sequence 32200 is already on disk as file /archives/CMOVP/stby/1_32200_810397891.arc
archived log for thread 1 with sequence 32201 is already on disk as file /archives/CMOVP/stby/1_32201_810397891.arc
archived log for thread 1 with sequence 32202 is already on disk as file /archives/CMOVP/stby/1_32202_810397891.arc
archived log for thread 1 with sequence 32203 is already on disk as file /archives/CMOVP/stby/1_32203_810397891.arc
archived log for thread 1 with sequence 32204 is already on disk as file /archives/CMOVP/stby/1_32204_810397891.arc
archived log for thread 1 with sequence 32205 is already on disk as file /archives/CMOVP/stby/1_32205_810397891.arc
archived log for thread 1 with sequence 32206 is already on disk as file /archives/CMOVP/stby/1_32206_810397891.arc
archived log for thread 1 with sequence 32207 is already on disk as file /archives/CMOVP/stby/1_32207_810397891.arc
archived log for thread 1 with sequence 32208 is already on disk as file /archives/CMOVP/stby/1_32208_810397891.arc
archived log for thread 1 with sequence 32209 is already on disk as file /archives/CMOVP/stby/1_32209_810397891.arc
archived log for thread 1 with sequence 32210 is already on disk as file /archives/CMOVP/stby/1_32210_810397891.arc
archived log for thread 1 with sequence 32211 is already on disk as file /archives/CMOVP/stby/1_32211_810397891.arc
archived log for thread 1 with sequence 32212 is already on disk as file /archives/CMOVP/stby/1_32212_810397891.arc
archived log for thread 1 with sequence 32213 is already on disk as file /archives/CMOVP/stby/1_32213_810397891.arc
archived log for thread 1 with sequence 32214 is already on disk as file /archives/CMOVP/stby/1_32214_810397891.arc
archived log for thread 1 with sequence 32215 is already on disk as file /archives/CMOVP/stby/1_32215_810397891.arc
archived log for thread 1 with sequence 32216 is already on disk as file /archives/CMOVP/stby/1_32216_810397891.arc
archived log for thread 1 with sequence 32217 is already on disk as file /archives/CMOVP/stby/1_32217_810397891.arc
archived log for thread 1 with sequence 32218 is already on disk as file /archives/CMOVP/stby/1_32218_810397891.arc
archived log for thread 1 with sequence 32219 is already on disk as file /archives/CMOVP/stby/1_32219_810397891.arc
archived log for thread 1 with sequence 32220 is already on disk as file /archives/CMOVP/stby/1_32220_810397891.arc
archived log for thread 1 with sequence 32221 is already on disk as file /archives/CMOVP/stby/1_32221_810397891.arc
archived log for thread 1 with sequence 32222 is already on disk as file /archives/CMOVP/stby/1_32222_810397891.arc
archived log for thread 1 with sequence 32223 is already on disk as file /archives/CMOVP/stby/1_32223_810397891.arc
archived log file name=/archives/CMOVP/stby/1_32196_810397891.arc thread=1 sequence=32196
released channel: prm1
released channel: stby1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/14/2013 01:11:33
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
ORA-00283: recovery session canceled due to errors
RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/archives/CMOVP/stby/1_32196_810397891.arc'
ORA-00283: recovery session canceled due to errors
ORA-00354: corrupt redo log block header
ORA-00353: log corruption near block 2048 change 1638686297 time 05/13/2013 22:42:03
ORA-00334: archived log: '/archives/CMOVP/stby/1_32196_810397891.arc'
################# What I did: ################################
Rma target /
RMAN>catalog archivelog '/archives/CMOVP/stby/1_32196_810397891.arc';
The I connect to target and Auxiliary again :Rman target / catalog rman/rman@rman auxiliary
and I run the last content of the failing memory script:RMAN> run
set until scn 1638816629;
recover
standby
clone database
delete archivelog
And The DB start the recovery Process and my Standby complete the recovery very weel with message "Recovery Finnish or Termintaed or Completed"
The I could configure Datagurd
And I check the process and the Log Apply was on and running fine, no gaps, perfect!!!!!
How !!! Just Cataloging an "Supposed Corrupted"archive log !!!!!!
If Any ideas, that ould be great to understand this.
Rgds
Carlos

okKarol wrote:
Hi Gurus,
I've posted few days ago an issue I got while recreating my Dataguard.
The Main issue was while duplicating target from active database I got this errors during the recovery process.
The Restore Process Went fine, RMAN Copied the Datafiles very well, but stop when at the moment to start the recovery process from the auxiliary db
Yesterday I took one last try,
I follow same procedure, the one described in all Oracle Docs, Google and so on ... it's not a secret I guess.
The I got the same issue, same errors.
I read soemthing about archivelogs, and the Block corruption and so on, I've tried so many things (register the log... etc etc ), and than I read something about "catalog the logfile)
and that's waht I did.
But I was just connect to the target db.
contents of Memory Script:
set until scn 1638816629;
recover
standby
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 14-MAY-13
starting media recovery
archived log for thread 1 with sequence 32196 is already on disk as file /archives/CMOVP/stby/1_32196_810397891.arc
archived log for thread 1 with sequence 32197 is already on disk as file /archives/CMOVP/stby/1_32197_810397891.arc
archived log for thread 1 with sequence 32198 is already on disk as file /archives/CMOVP/stby/1_32198_810397891.arc
archived log for thread 1 with sequence 32199 is already on disk as file /archives/CMOVP/stby/1_32199_810397891.arc
archived log for thread 1 with sequence 32200 is already on disk as file /archives/CMOVP/stby/1_32200_810397891.arc
archived log for thread 1 with sequence 32201 is already on disk as file /archives/CMOVP/stby/1_32201_810397891.arc
archived log for thread 1 with sequence 32202 is already on disk as file /archives/CMOVP/stby/1_32202_810397891.arc
archived log for thread 1 with sequence 32203 is already on disk as file /archives/CMOVP/stby/1_32203_810397891.arc
archived log for thread 1 with sequence 32204 is already on disk as file /archives/CMOVP/stby/1_32204_810397891.arc
archived log for thread 1 with sequence 32205 is already on disk as file /archives/CMOVP/stby/1_32205_810397891.arc
archived log for thread 1 with sequence 32206 is already on disk as file /archives/CMOVP/stby/1_32206_810397891.arc
archived log for thread 1 with sequence 32207 is already on disk as file /archives/CMOVP/stby/1_32207_810397891.arc
archived log for thread 1 with sequence 32208 is already on disk as file /archives/CMOVP/stby/1_32208_810397891.arc
archived log for thread 1 with sequence 32209 is already on disk as file /archives/CMOVP/stby/1_32209_810397891.arc
archived log for thread 1 with sequence 32210 is already on disk as file /archives/CMOVP/stby/1_32210_810397891.arc
archived log for thread 1 with sequence 32211 is already on disk as file /archives/CMOVP/stby/1_32211_810397891.arc
archived log for thread 1 with sequence 32212 is already on disk as file /archives/CMOVP/stby/1_32212_810397891.arc
archived log for thread 1 with sequence 32213 is already on disk as file /archives/CMOVP/stby/1_32213_810397891.arc
archived log for thread 1 with sequence 32214 is already on disk as file /archives/CMOVP/stby/1_32214_810397891.arc
archived log for thread 1 with sequence 32215 is already on disk as file /archives/CMOVP/stby/1_32215_810397891.arc
archived log for thread 1 with sequence 32216 is already on disk as file /archives/CMOVP/stby/1_32216_810397891.arc
archived log for thread 1 with sequence 32217 is already on disk as file /archives/CMOVP/stby/1_32217_810397891.arc
archived log for thread 1 with sequence 32218 is already on disk as file /archives/CMOVP/stby/1_32218_810397891.arc
archived log for thread 1 with sequence 32219 is already on disk as file /archives/CMOVP/stby/1_32219_810397891.arc
archived log for thread 1 with sequence 32220 is already on disk as file /archives/CMOVP/stby/1_32220_810397891.arc
archived log for thread 1 with sequence 32221 is already on disk as file /archives/CMOVP/stby/1_32221_810397891.arc
archived log for thread 1 with sequence 32222 is already on disk as file /archives/CMOVP/stby/1_32222_810397891.arc
archived log for thread 1 with sequence 32223 is already on disk as file /archives/CMOVP/stby/1_32223_810397891.arc
archived log file name=/archives/CMOVP/stby/1_32196_810397891.arc thread=1 sequence=32196
released channel: prm1
released channel: stby1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/14/2013 01:11:33
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
ORA-00283: recovery session canceled due to errors
RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/archives/CMOVP/stby/1_32196_810397891.arc'
ORA-00283: recovery session canceled due to errors
ORA-00354: corrupt redo log block header
ORA-00353: log corruption near block 2048 change 1638686297 time 05/13/2013 22:42:03
ORA-00334: archived log: '/archives/CMOVP/stby/1_32196_810397891.arc'
################# What I did: ################################
Rma target /
RMAN>catalog archivelog '/archives/CMOVP/stby/1_32196_810397891.arc';
The I connect to target and Auxiliary again :Rman target / catalog rman/rman@rman auxiliary
and I run the last content of the failing memory script:RMAN> run
set until scn 1638816629;
recover
standby
clone database
delete archivelog
And The DB start the recovery Process and my Standby complete the recovery very weel with message "Recovery Finnish or Termintaed or Completed"
The I could configure Datagurd
And I check the process and the Log Apply was on and running fine, no gaps, perfect!!!!!
How !!! Just Cataloging an "Supposed Corrupted"archive log !!!!!!
If Any ideas, that ould be great to understand this.
Rgds
CarlosHi,
Can you change standby database archive destination from /archives/CMOVP/stby/ other disk?
I think this problem on your disk.
Mahir
p.s. I remember you before thread, too

IMac 27" Late 2013 Wi Fi Log in Issue

Hello everyone,
I apologize if my questions have been asked in the past. I'm completely new to the Apple Mac OS. I bought a new iMac 27" in the middle of 2014 and use it about once or twice a week and have had no issues to-date. I'm still in the process of learning though so my use of it is limited to basic emailing, web browsing and Skype.
In the last 2 weeks I have had problems logging into my Wifi network at home. It would not log on even after I had reset the modem. After trying and rebooting my iMac 3-4 times it would finally do so without changing anything in the it. I'm not sure what is causing it, but thought I would ask here.
What would be causing the log in issue to my Wi Fi network?
Do I need to be concern with the findings in the Etre check?
Startup after logging in my password would take longer than usual...what would be causing it?
Here is the result from the Etre scan. I guess what concerns me is in red...and also if it shows the Wi Fi log in issue.
Thank you in advance for your help and advice.
EtreCheck version: 2.1.8 (121)
Report generated 9 February 2015 11:23:18 am AEST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (27-inch, Late 2013) (Technical Specifications)
    iMac - model: iMac14,2
    1 3.4 GHz Intel Core i5 CPU: 4-core
    32 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 0/DIMM1
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM1
            8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
    NVIDIA GeForce GTX 780M - VRAM: 4096 MB
        iMac 2560 x 1440
System Software: ℹ️
    OS X 10.9.5 (13F34) - Time since boot: 0:24:23
Disk Information: ℹ️
    APPLE SSD SD0128F disk0 : (121.33 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Boot OS X (disk0s3) <not mounted> : 134 MB
        Macintosh HD (disk2) / : 1.11 TB (1.04 TB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 120.99 GB Online
            Core Storage: disk1s2 999.35 GB Online
    APPLE HDD ST1000DM003 disk1 : (1 TB)
        EFI (disk1s1) <not mounted> : 210 MB
        Recovery HD (disk1s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk2) / : 1.11 TB (1.04 TB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 120.99 GB Online
            Core Storage: disk1s2 999.35 GB Online
USB Information: ℹ️
    VIA Labs, Inc.          USB3.0 Hub
        VIA Labs, Inc.          USB3.0 Hub
            Seagate Backup+ SL 2 TB
        EFI (disk3s1) <not mounted> : 210 MB
        Seagate Backup Plus Drive (disk3s2) /Volumes/Seagate Backup Plus Drive : 2.00 TB (1.82 TB free)
        Recovery HD (disk3s3) <not mounted> [Recovery]: 650 MB
            Initio   INIC-3609
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Logitech Inc. Logitech USB Headset H340
    Apple, Inc. Keyboard Hub
        Apple Inc. Apple Keyboard
    VIA Labs, Inc.          USB2.0 Hub
        VIA Labs, Inc.          USB2.0 Hub
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Startup Items: ℹ️
    ProTec6b: Path: /Library/StartupItems/ProTec6b
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.bombich.ccc.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [failed]    com.spotify.webhelper.plist [Click for support]
    [not loaded]    jp.co.canon.Inkjet_Extended_Survey_Agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Alfred 2    Application (/Applications/Alfred 2.app)
    Spotify 08-26-32-444    Application (/Users/[redacted]/.Trash/Spotify 08-26-32-444.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Canon IJ Network Scanner Selector EX    Application Hidden (/Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app)
    Speech Startup    Application (/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogn ition.framework/Versions/A/Speech Startup.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 16.0.0.296 - SDK 10.6 Outdated! Update
    EPPEX Plugin: Version: 3.0.5.0 [Click for support]
    Default Browser: Version: 537 - SDK 10.9
    SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.20125.0 - SDK 10.6 [Click for support]
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 1.11 TB Disk used: 75.54 GB
    Destinations:
        Seagate Backup Plus Drive [Local]
        Total size: 2.00 TB
        Total number of backups: 33
        Oldest backup: 2014-04-16 03:45:27 +0000
        Last backup: 2015-02-09 01:07:51 +0000
        Size of backup disk: Adequate
            Backup size 2.00 TB > (Disk used 75.54 GB X 3)
Top Processes by CPU: ℹ️
         3%    WindowServer
         2%    Safari
         2%    Google Chrome
         1%    fontd
         1%    coreaudiod
Top Processes by Memory: ℹ️
    481 MB    WindowServer
    309 MB    Airmail
    206 MB    mds_stores
    206 MB    Safari
    172 MB    Google Chrome
Virtual Memory Information: ℹ️
    27.13 GB    Free RAM
    4.39 GB    Active RAM
    1.08 GB    Inactive RAM
    1.75 GB    Wired RAM
    912 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Feb 9, 2015, 10:58:33 AM    Self test - pass

Hi, Jiyujin.
Thank you for visiting Apple Support Communities.
I would need some clarification of the reference to log on and a little more information about the behavior to provide a better answer. However, here is a troubleshooting article that may help.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/HT202222
Cheers,
Jason H.

Remote lock & Memory card corrupted issue

Remote lock & Memory card corrupted issue
Hi Dear Friends,
You might have experienced the "Memory card corrupted issue."
Don't panic! The solution is here!
Your memory card is just 'locked', it isn't 'corrupted'!
For sure, this post would be of great help to you, if:
• You have enabled the "Remote lock" feature of your Nokia device.
• You have sent the remote lock message to your device and locked it remotely.
Finding the solution really took me a lot of time. I was inspired by various posts on the Discussion, and decided to find the official notes on the issue. So would like to thank those who shared their tips, and helped us solve this problem.
I'm using E66, (you might use something else), and would refer to E51's and E65's User guide so often.
Of course, I'm not going to explain the instructions, and recommend you to refer to your user guides when needed.
On the contrary, I'm going to explain what may not be mentioned in your user guides.
Let’s Begin
What Has Happened:
In short, you attempted to test the feature, your phone was locked, you keyed in the lock code, code was accepted, you used the phone for a while, switched it off, powered it on, you were prompted the Lock code, you keyed in the lock code, code was accepted, you attempted to view some stuff that was on your memory card, you didn't find it, you tried to run a program that was installed on your memory card, the program icon didn't open, you put the memory card in the card reader and connected it to PC, it was not detected, you went to Menu> Tools> Memory card> You saw "Memory card corrupted"!
Don't, don't select the Yes selection key if you got the caution message, "Memory Card corrupted, reformat it?" because your memory card isn't corrupted, it's simply being locked!
But you can't find the unlock memory card command in Menu> Tools> Memory card> Options.
So? What to DO?
1. (This step is optional) Disable the Remote lock feature.
(Refer to your user guides) and change Allow Remote Lock> to no.
Then, while the unit is on,
2. Press the power key briefly, and select Remove memory card.
3. Remove the memory card from the slot.
4. Press OK if prompted.
5. Reinsert the memory card in the slot.
6. Reopen Menu> Tools> Memory card.
Is your memory card detected? If yes!
7. Follow tips number 2 & 3 of What to Know section below.
Did you get "Password removed" message?
If no, be careful of the case of the first character.
If you had changed the Remote lock message many times, use the one that was practically sent to the device via text message.
. In case you had set a password on your memory card before, you may also attempt to unlock the locked memory using your own password, not the first eight characters of the remote lock message.
Step seven would make the memory card detectable to the connected card reader to the PC too.
8. The memory card is detected temporarily, but it is locked and the "memory card corrupted" issue reappears every time you switch off/on the phone, unless you successfully complete step seven.
What to Know?
Official User guide Tips:
1. Remote locking also locks your memory card. (E51 page100)
. Yes, the one mobile phone that sends your device the predefined remote locking message, receives the confirmation message in response, indicating, "Mobile telephone and memory card are locked". But it isn't written in E66's and E65's.
2. To unlock the memory card, select Menu> Tools> Memory> Options> Remove password, and "enter the remote locking message as the password". (E51 page100)
. Yes, quite clear, but the quoted part ("enter the remote locking message as the password") isn't written on my E66's User guide, and there's a vague precaution on E65's, (refer to number 4).
3. If the message is longer than 8 characters, the first 8 characters are used as the memory card password. (E51 page100)
. Yes, quite clear good E51, but I don't own you; I have E66 your little sister. I owe my memory card's survival to nice users on the Discussion.
4. The maximum number of characters allowed is 8. Using more than 8 characters could prevent unlocking the memory card and require reformatting it. If reformatting the memory card is required, all information on the card will be lost. (E65 page28)
. Quite interesting, but it contradicts what good E51 says in number three¡!
. And it contradicts my own experience of the issue (and some other users' on the Discussion) too, since my E66's memory card accepted the 'first eight characters' of the 'ten-character long’ remote lock message that I had previously used to remote lock it.
. The first three tips are quite important and shouldn't have been excluded from E66's and E65's user guides. I don't have the time to download and review all the user guides that support this feature, but at least I read some user manuals and also got the impression (from the posts on the discussion) that there had been not enough information on E66's, E65's, E71's, N96's, and some others.
You may like to do a simple search on Google:
"The first 8 characters are used as the memory card password" site:nokia.com
Since the content of the user guides on the server seem not be searchable for any reason, you won't find any official support result except those of the good users on the Discussions. And the 'Nokia Site Search" brings no result too. (At least on the date of this post).
¡ Terribly sorry for those who have selected Yes to the Reformat caution message. It wasn't your fault. But there's an idiom that says, sleep on it! "Think about it for a while before coming up with a decision".
But now that you have tested the feature and know its solution, don't be afraid, and enable the Remote lock feature again! God forbid, but it may be needed one day!
Yours,
http://nds1.nokia.com/phones/files/guides/Nokia_E51_UG_en.pdf
http://nds1.nokia.com/phones/files/guides/Nokia_E65-1_UG_en.pdf
http://nds1.nokia.com/phones/files/guides/Nokia_E66-1_UG_en.pdf

Dear, I guess, / This article doesn't suit your case. / • You have not enabled the "Remote lock" feature of your Nokia device. / • You have not locked your device remotely. / Because you don't know where the remote lock is and haven't played with its settings. / You need to explain what has happened. / The only thing we get is that your memory card doesn't open. / 1. your phone model, e.g., 5130. / 2. What did you do recently that might have caused this issue? / 3. What methods did you try to unlock it? / Use some of the tips provided above. (except number 1). / Yours

How to deal with corruption issue?

A couple of months ago after installing Aperture 2, my Imac started slowing down, every program at some time would hang and could not be forced to quit. The machine had to be turned off (control command power) and left off for several minutes. On restart, things would be fine for 1 to several days. It has been to the shop twice with no improvement and I have talked to the experts a couple of time. This is my first mac so I only have a couple of years experience. From all I have read it would seem I have a corruption issue. I set up a troubleshooting account and the computer acts like it did when it was new on that account. Of course I can use none of my data in this account. Where do I go from here, reset preferences, archive and reformat? Please give me some suggestions and directions on how to do it?
Thanks,
oldgrandad

Hi,
It sounds like it's the same issue I was having. In my experience, as long as important data is backed up, doing an "Erase & Install" from time to time clears out any files/data that is causing your system to run slow (cache files etc). Mine had become painfully slow (I work mainly with images/large files) & was getting a bit frustrating if I was using Aperture & Photoshop etc.
I also use Techtool Pro to defrag & keep my hard drives in good shape.
The extra RAM combined with the "cleanse" definitely made a big improvement & all programmes run extremely well now.
Ben

MSI 870A-G54 Blue Screen & Corruption Issues in Windows 7 64-bit

I am having periodic blue screen and corruption issues in Winodws 7 64-bit with my MSI 870A-G54 system. I have a Phenom II X2 560 BE processor, 2 4GB DDR 1333 DIMMs (first bank - unganged), 2 2GB DDR3 1333 DIMMs (2nd bank - unganged), 2 Hitachi 1TB 32MB Cache HDD's in a RAID 0 array, two Galaxy PCIe2.0 GT9500's, 550w power supply, internal DVD drive, and 1 1TB Seagate external 3.0 USB drive. After I load all the supplementary drivers from the MSI site (ensuring I use the 64bit versions), my system becomes unstable. I even tried the new motherboard chipset drivers from AMD (10.12). I am running the latest firmware as well (17.7). The system in not overclocked in any manner and I experience the same results with fail-safe and optimized settings.
I have tried isolating the issue after loading each driver, but due to the random nature of the issue, I am not having success. I have also performed memory and CPU tests that report no errors. Any ideas?
Thanks for your help...

What specifications are you referencing that indicate this processor only works with two sticks of RAM?
My exact specifications are listed below. Thanks again for your help...
Component   Manufacturer   Model     Notes
Motherboard   MSI     870A-G54
Processor   AMD    Phenom II X2 560 BE
Video Card   Galaxy     9500 GT     PCIe 2.0 - 512MB DDR3
Video Card   Galaxy     9500 GT     PCIe 2.0 - 512MB DDR3
Case     Antec     Three Hundred     ATX
Power Supply   OCZ     OCZ550FTY     Fata1ty 550w Modular
Hard Disk Drive   Hitachi     H3D10003272S     SATAII 1TB 32MB Cache
Hard Disk Drive   Hitachi     H3D10003272S     SATAII 1TB 32MB Cache
Memory     PNY     MD4096KD3-1333     1 2GB DDR3 1333MHz
Memory    PNY     MD4096KD3-1333     1 2GB DDR3 1333MHz
Memory     OCZ     OCZ3G1333LV8GK    1 4GB DDR3 1333MHz
Memory     OCZ     OCZ3G1333LV8GK     1 4GB DDR3 1333MHz
DVD Burner   Sony     Optiarc AD-7261S     SATA

Send mail to the user who logged the issue

Hi,
As it is currently the mail goes to the key user, which is a business partner. That is an organization. However several users are maintained under a business partner.
So now the mail goes to all these users at a status change. However can we only have the user who logged the issue getting the mail. Can you please advice me on how to get this?
Thanks loads.
Keshi

Hi.. Thanks for all ur replies..
Yes we hv assigned the key user as a business partner which is an organization,, This is also and requirement,
But since the mail is activated as to the key user it goes to all the users in that group, under teh business partner.
But when configuring this came across the Partner, in which we selected it as key user. But there were also other partners as Creator,Reported by etc..
I tried using both these but again it didnt work. Can anyone suggest anything?
Yes, when u assign the key user as a business partner and assign several users to it you can send multiple mails to users
Any help on this is very much appreciated,.,
Thanks all for replying once again.
Keshi

Enterprise Portal Log off Issue for External User

Hello
We are facing a Enterprise Portal log off issue for one of our external users.
User is logged in and clicks on the "Log Off" link .
User is prompted as seen below:
Are you sure you want to logg off?
Choose Yes or No
Click on Yes and popup window goes away and nothing else happens.
These problems logg off issue problem happening on Internet Explorer 6 but from from firefox browser, its working.
Also popups are not blocked on IE.
EP version with SP level is EP 7.00 SP12.
Even though from Internet explorer 6, i can log in and log off with internal user.
Please advise for the log off problem .

Hello
I added the value ume.logoff.redirect.url =https://poqwas.synenco.com/irj/portal
on Config Tool Global Paramter settings.
Then restart the server.
But I am getting the same problem.when I login with external user ID, then make log off. Nothin Happen...
Please advise

Log corruption near block 1737

hi,
i am getting an error while open the db
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-00368: checksum error in redo log block
ORA-00353: log corruption near block 1737 change 16680088 time 12/22/2008
10:40:13
ORA-00312: online log 2 thread 1: 'G:\ORACLE\ORADATA\HOTEST\REDO02.LOG'while doing an incomplete recovery it is asking for an archived file which i am not having i.e ARC_801_1.ARC.........
SQL> recover database until cancel;
ORA-00279: change 16679127 generated at 12/22/2008 10:37:11 needed for thread 1
ORA-00289: suggestion : G:\ORACLE\ARCH\ARC_801_1.ARC
ORA-00280: change 16679127 for thread 1 is in sequence #801
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
cancel
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'G:\ORACLE\ORADATA\HOTEST\SYSTEM01.DBF'
ORA-01112: media recovery not startedpls suggest me for the same....

I am not having a archived log of sequence no. 801 neither i am having backup, is there any other way to up the db....
SMON: enabling tx recovery
Mon Dec 22 10:37:16 2008
Database Characterset is WE8MSWIN1252
replication_dependency_tracking turned off (no async multimaster replication found)
Completed: alter database open
Corrupt block relative dba: 0x0300cc4b (file 12, block 52299)
Bad check value found during buffer read
Data in bad block -
type: 6 format: 2 rdba: 0x0300cc4b
last change scn: 0x0000.000fa127 seq: 0x1 flg: 0x06
consistency value in tail: 0xa1270601
check value in block header: 0x8f85, computed block checksum: 0xcf00
spare1: 0x0, spare2: 0x0, spare3: 0x0
Reread of rdba: 0x0300cc4b (file 12, block 52299) found valid data
Corrupt block relative dba: 0x0300cdfb (file 12, block 52731)
Bad check value found during buffer read
Data in bad block -
type: 6 format: 2 rdba: 0x0300cdfb
last change scn: 0x0000.000fa128 seq: 0x1 flg: 0x04
consistency value in tail: 0xa1280601
check value in block header: 0x446b, computed block checksum: 0x3200
spare1: 0x0, spare2: 0x0, spare3: 0x0
Reread of rdba: 0x0300cdfb (file 12, block 52731) found valid data
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     Dump file g:\oracle\admin\hotest\bdump\alert_hotest.log
Mon Dec 22 10:41:29 2008
ORACLE V9.2.0.4.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.1 Service Pack 2, CPU type 586
Mon Dec 22 10:41:29 2008
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 2
Using log_archive_dest parameter default value
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.4.0.
System parameters with non-default values:
processes                = 150
timed_statistics         = TRUE
shared_pool_size         = 50331648
large_pool_size          = 8388608
java_pool_size           = 33554432
control_files            = G:\oracle\oradata\hotest\CONTROL01.CTL, G:\oracle\oradata\hotest\CONTROL02.CTL, G:\oracle\oradata\hotest\CONTROL03.CTL
db_block_size            = 8192
db_cache_size            = 25165824
compatible               = 9.2.0.0.0
log_archive_start        = TRUE
log_archive_dest_1       = location=G:\oracle\arch
log_archive_dest_2       = SERVICE=stand LGWR ASYNC
log_archive_dest_state_1 = ENABLE
log_archive_dest_state_2 = ENABLE
fal_server               = STAND
fal_client               = HOTEST
log_archive_format       = arc_%s_%t.arc
db_file_multiblock_read_count= 16
fast_start_mttr_target   = 300
undo_management          = AUTO
undo_tablespace          = UNDOTBS1
undo_retention           = 10800
remote_login_passwordfile= EXCLUSIVE
db_domain                =
instance_name            = hotest
dispatchers              = (PROTOCOL=TCP) (SERVICE=hotestXDB)
job_queue_processes      = 10
hash_join_enabled        = TRUE
background_dump_dest     = G:\oracle\admin\hotest\bdump
user_dump_dest           = G:\oracle\admin\hotest\udump
core_dump_dest           = G:\oracle\admin\hotest\cdump
sort_area_size           = 524288
db_name                  = hotest
open_cursors             = 300
star_transformation_enabled= FALSE
query_rewrite_enabled    = FALSE
pga_aggregate_target     = 25165824
aq_tm_processes          = 1
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
CJQ0 started with pid=8
QMN0 started with pid=9
Mon Dec 22 10:41:36 2008
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=12
ARC0: Archival started
ARC1 started with pid=13
Mon Dec 22 10:41:37 2008
ARCH: STARTING ARCH PROCESSES COMPLETE
Mon Dec 22 10:41:37 2008
ARC0: Thread not mounted
Mon Dec 22 10:41:38 2008
ARC1: Archival started
Mon Dec 22 10:41:38 2008
ARC1: Thread not mounted
Mon Dec 22 10:41:38 2008
alter database mount exclusive
Mon Dec 22 10:41:43 2008
Successful mount of redo thread 1, with mount id 1003521250.
Mon Dec 22 10:41:43 2008
Database mounted in Exclusive Mode.
Completed: alter database mount exclusive
Mon Dec 22 10:41:43 2008
alter database open
Mon Dec 22 10:41:44 2008
Beginning crash recovery of 1 threads
Mon Dec 22 10:41:44 2008
Started first pass scan
ORA-368 signalled during: alter database open...
Mon Dec 22 10:42:35 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Dump file g:\oracle\admin\hotest\bdump\alert_hotest.log
Mon Dec 29 10:14:22 2008
ORACLE V9.2.0.4.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.1 Service Pack 2, CPU type 586
Mon Dec 29 10:14:22 2008
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 2
Using log_archive_dest parameter default value
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.4.0.
System parameters with non-default values:
processes                = 150
timed_statistics         = TRUE
shared_pool_size         = 50331648
large_pool_size          = 8388608
java_pool_size           = 33554432
control_files            = G:\oracle\oradata\hotest\CONTROL01.CTL, G:\oracle\oradata\hotest\CONTROL02.CTL, G:\oracle\oradata\hotest\CONTROL03.CTL
db_block_size            = 8192
db_cache_size            = 25165824
compatible               = 9.2.0.0.0
log_archive_start        = TRUE
log_archive_dest_1       = location=G:\oracle\arch
log_archive_dest_2       = SERVICE=stand LGWR ASYNC
log_archive_dest_state_1 = ENABLE
log_archive_dest_state_2 = ENABLE
fal_server               = STAND
fal_client               = HOTEST
log_archive_format       = arc_%s_%t.arc
db_file_multiblock_read_count= 16
fast_start_mttr_target   = 300
undo_management          = AUTO
undo_tablespace          = UNDOTBS1
undo_retention           = 10800
remote_login_passwordfile= EXCLUSIVE
db_domain                =
instance_name            = hotest
dispatchers              = (PROTOCOL=TCP) (SERVICE=hotestXDB)
job_queue_processes      = 10
hash_join_enabled        = TRUE
background_dump_dest     = G:\oracle\admin\hotest\bdump
user_dump_dest           = G:\oracle\admin\hotest\udump
core_dump_dest           = G:\oracle\admin\hotest\cdump
sort_area_size           = 524288
db_name                  = hotest
open_cursors             = 300
star_transformation_enabled= FALSE
query_rewrite_enabled    = FALSE
pga_aggregate_target     = 25165824
aq_tm_processes          = 1
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
CJQ0 started with pid=8
QMN0 started with pid=9
Mon Dec 29 10:14:28 2008
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=12
ARC0: Archival started
ARC1 started with pid=13
ARC1: Archival started
Mon Dec 29 10:14:30 2008
ARCH: STARTING ARCH PROCESSES COMPLETE
Mon Dec 29 10:14:30 2008
ARC1: Thread not mounted
Mon Dec 29 10:14:31 2008
ARC0: Thread not mounted
Mon Dec 29 10:14:32 2008
alter database mount exclusive
Mon Dec 29 10:14:37 2008
Successful mount of redo thread 1, with mount id 1004122632.
Mon Dec 29 10:14:37 2008
Database mounted in Exclusive Mode.
Completed: alter database mount exclusive
Mon Dec 29 10:14:37 2008
alter database open
Mon Dec 29 10:14:37 2008
Beginning crash recovery of 1 threads
Mon Dec 29 10:14:38 2008
Started first pass scan
ORA-368 signalled during: alter database open...
Mon Dec 29 10:15:29 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 10:20:44 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 10:25:54 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 10:31:09 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 10:36:24 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 10:41:40 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 10:46:55 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 10:52:10 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 10:57:26 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 11:02:41 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 11:07:56 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 11:13:05 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 11:18:15 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 11:23:30 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 11:28:39 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 11:33:49 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 11:39:04 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 11:44:19 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 11:49:35 2008
Restarting dead background process QMN0
QMN0 started with pid=9
Mon Dec 29 11:54:44 2008
Restarting dead background process QMN0
QMN0 started with pid=15
Mon Dec 29 11:59:59 2008
Restarting dead background process QMN0
QMN0 started with pid=14
Mon Dec 29 12:03:06 2008
alter database open
Mon Dec 29 12:03:06 2008
Beginning crash recovery of 1 threads
Mon Dec 29 12:03:07 2008
Started first pass scan
ORA-368 signalled during: alter database open...
Mon Dec 29 12:05:09 2008
Restarting dead background process QMN0
QMN0 started with pid=15
Mon Dec 29 12:05:14 2008
ALTER DATABASE RECOVER database until cancel
Mon Dec 29 12:05:14 2008
Media Recovery Start
Starting datafile 1 recovery in thread 1 sequence 801
Datafile 1: 'G:\ORACLE\ORADATA\HOTEST\SYSTEM01.DBF'
Starting datafile 2 recovery in thread 1 sequence 801
Datafile 2: 'G:\ORACLE\ORADATA\HOTEST\UNDOTBS01.DBF'
Starting datafile 3 recovery in thread 1 sequence 801
Datafile 3: 'G:\ORACLE\ORADATA\HOTEST\CWMLITE01.DBF'
Starting datafile 4 recovery in thread 1 sequence 801
Datafile 4: 'G:\ORACLE\ORADATA\HOTEST\DRSYS01.DBF'
Starting datafile 5 recovery in thread 1 sequence 801
Datafile 5: 'G:\ORACLE\ORADATA\HOTEST\EXAMPLE01.DBF'
Starting datafile 6 recovery in thread 1 sequence 801
Datafile 6: 'G:\ORACLE\ORADATA\HOTEST\INDX01.DBF'
Starting datafile 7 recovery in thread 1 sequence 801
Datafile 7: 'G:\ORACLE\ORADATA\HOTEST\ODM01.DBF'
Starting datafile 8 recovery in thread 1 sequence 801
Datafile 8: 'G:\ORACLE\ORADATA\HOTEST\TOOLS01.DBF'
Starting datafile 9 recovery in thread 1 sequence 801
Datafile 9: 'G:\ORACLE\ORADATA\HOTEST\USERS01.DBF'
Starting datafile 10 recovery in thread 1 sequence 801
Datafile 10: 'G:\ORACLE\ORADATA\HOTEST\XDB01.DBF'
Starting datafile 11 recovery in thread 1 sequence 801
Datafile 11: 'G:\ORACLE\ORADATA\HOTEST\CADATA3.ORA'
Starting datafile 12 recovery in thread 1 sequence 801
Datafile 12: 'G:\ORACLE\ORADATA\HOTEST\CADATA.ORA'
Starting datafile 13 recovery in thread 1 sequence 801
Datafile 13: 'G:\ORACLE\ORADATA\HOTEST\CADATAWRO.ORA'
Starting datafile 14 recovery in thread 1 sequence 801
Datafile 14: 'G:\ORACLE\ORADATA\HOTEST\CADATANRO.ORA'
Starting datafile 15 recovery in thread 1 sequence 801
Datafile 15: 'G:\ORACLE\ORADATA\HOTEST\CADATACRO.ORA'
Starting datafile 16 recovery in thread 1 sequence 801
Datafile 16: 'G:\ORACLE\ORADATA\HOTEST\CADATAOTH.ORA'
Starting datafile 17 recovery in thread 1 sequence 801
Datafile 17: 'G:\ORACLE\ORADATA\HOTEST\CADATAERO.ORA'
Starting datafile 18 recovery in thread 1 sequence 801
Datafile 18: 'G:\ORACLE\ORADATA\HOTEST\CADATAHO.ORA'
Starting datafile 19 recovery in thread 1 sequence 801
Datafile 19: 'G:\ORACLE\ORADATA\HOTEST\CADATASRO.ORA'
Starting datafile 20 recovery in thread 1 sequence 801
Datafile 20: 'G:\ORACLE\ORADATA\HOTEST\PAYROLL.ORA'
Starting datafile 21 recovery in thread 1 sequence 801
Datafile 21: 'G:\ORACLE\ORADATA\HOTEST\ORION.ORA'
Starting datafile 22 recovery in thread 1 sequence 801
Datafile 22: 'G:\ORACLE\ORADATA\HOTEST\ATHENA.ORA'
Starting datafile 23 recovery in thread 1 sequence 801
Datafile 23: 'G:\ORACLE\ORADATA\HOTEST\CAL_YEAR_2004.ORA'
Starting datafile 24 recovery in thread 1 sequence 801
Datafile 24: 'G:\ORACLE\ORADATA\HOTEST\CAL_YEAR_2005.ORA'
Starting datafile 25 recovery in thread 1 sequence 801
Datafile 25: 'G:\ORACLE\ORADATA\HOTEST\CAL_YEAR_2006.ORA'
Starting datafile 26 recovery in thread 1 sequence 801
Datafile 26: 'G:\ORACLE\ORADATA\HOTEST\CAL_YEAR_2007.ORA'
Starting datafile 27 recovery in thread 1 sequence 801
Datafile 27: 'G:\ORACLE\ORADATA\HOTEST\CAL_YEAR_2008.ORA'
Starting datafile 28 recovery in thread 1 sequence 801
Datafile 28: 'G:\ORACLE\ORADATA\HOTEST\CAL_YEAR_2009.ORA'
Starting datafile 29 recovery in thread 1 sequence 801
Datafile 29: 'G:\ORACLE\ORADATA\HOTEST\EXAMPLE02.DBF'
Starting datafile 30 recovery in thread 1 sequence 801
Datafile 30: 'G:\ORACLE\ORADATA\HOTEST\EXAMPLE02.RAW'
Media Recovery Log
ORA-279 signalled during: ALTER DATABASE RECOVER database until cancel ...
Mon Dec 29 12:06:24 2008
ALTER DATABASE RECOVER    CANCEL
Mon Dec 29 12:06:24 2008
ORA-1547 signalled during: ALTER DATABASE RECOVER    CANCEL ...
Mon Dec 29 12:06:24 2008
ALTER DATABASE RECOVER CANCEL
ORA-1112 signalled during: ALTER DATABASE RECOVER CANCEL ...
Mon Dec 29 12:06:40 2008
alter database open resetlogs
Mon Dec 29 12:06:41 2008
ORA-1194 signalled during: alter database open resetlogs...
Mon Dec 29 12:06:47 2008
alter database open noresetlogs
Mon Dec 29 12:06:48 2008
Beginning crash recovery of 1 threads
Mon Dec 29 12:06:48 2008
Started first pass scan
ORA-368 signalled during: alter database open noresetlogs...
Mon Dec 29 12:10:24 2008
Restarting dead background process QMN0
QMN0 started with pid=15
Mon Dec 29 12:15:39 2008
Restarting dead background process QMN0
QMN0 started with pid=15
Mon Dec 29 12:20:55 2008
Restarting dead background process QMN0
QMN0 started with pid=15
Mon Dec 29 12:26:10 2008

LION screen sharing and remote log in issues

Hi,
In Snow Leopard I could access my iMac screen from my macbook and have the iMac restart and allow me to log in and continue to use the iMac.
In Lion I cannot access the log in screen remotely after a restart.
I need to go to the iMac and actually log into it with the keyboard before it will show up again on the network.
I tried to adjust the sharing preferences but nothing is allowing me to manage the iMac and restart it from a different machine.
Once I am logged in the screen sharing works fine. It's the log in issue that is not working for me.
thanks for any help in advance,
christos

i have not been able to get screen sharing to work at all, which has never been a problem for me. i'm registered as an authorized user on both computers, the passwords are correct, but it keeps telling me that the username/passwords don't work. and this is after the computers have already been "connected" using the exact same passwords and user name.

Dreamweaver log in issues

Is there anyone experiencing log in issues to B.C. through Dreamweaver? My log in issue started about a few hours ago. I can log in directly to B.C., but when I try to log in using the same name and password that I've always used, I can't log in.

Hey Legacys7, please PM me your login details and I'll test this for you. If you can access admin you should be able to log in to BC Extension. It's using the same auth system.
Cheers,
mario

E4200V2 file corruption issues

Hello,
I am getting file corruption issues when doing a file transfer onto the NAS (hard drive plugged into the router). Files are turned into folders while keeping the same filename. It happens occasionally.
I have firmware: 2.1.39.145204 installed.
Any remedy for this as it is a very serious problem.

The only known solution is to call linksys and ask them for a replacement router model that does not contain the bug. See thread link for details.
http://community.linksys.com/t5/Wireless-Routers/Media-files-changing-to-folder-types/td-p/504192/hi...

Facetime and Message log in issue

Hi to all,
I would like to seek your assistance with the Facetime and message log in issue that I am having.
I recently installed the Mountain Lion OS 10.8, now using version 10.8.2, on my personal laptop, Macbook Pro (Mid-2009 model). I have tried many times to log into both applications via my Apple ID but have been unsuccessful.
This afternoon I tried accessing Facetime on my work laptop (Macbook 2010 model, OS Lion 10.7.5) via my Apple ID and it worked.
Can someone please help me in resolving my log in issue with my personal laptop? Much appreciated.
Kind Regards,
Wing Kuen

I would make sure you are logged into iCloud in the System Preference pane, "Icloud".
Then go the the indivusial prefrences of Facetime and Messages, and try to log in.
Hope this helps!

Applying transaction log corrupted database?

Hi experts,
Symptoms:
I built a standby system this Monday and I completed a full DB restore without errors. I used log shipping to apply logs but an error occurred: SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 20:5746350; actual 0:0). It occurred during a read of page (20:5746350) in database ID 5 at offset 0x00000af5d5c000 in file 'l:\TCPDATA4\TCPDATA19.ndf'.
I run dbcc page and found page(20:5746350) did corrupt on standby system. However, I ran dbcc page on production and it is ok. I restored this full db to another standby and ran dbcc page and it is ok. Also, Checkalloc, Checkcatalog, Checktable on production are ok.
Questions:
Does checktable detect secondary indexes corruption? I am re-compressing COSP indexes and running full checkdb on production right now to find out what's going on in our DB. How do I fix this issue? Any information will be really appreciated.
Error message:
2011-08-23 17:26:00.19 spid52      The log shipping secondary database TCCDBM1.TCP has restore threshold of 45 minutes and is out of sync. No restore was performed for 1 minutes. Restored latency is 720 minutes. Check agent log and logshipping monitor information.
2011-08-23 17:26:39.62 Backup      Log was restored. Database: TCP, creation date(time): 2011/07/03(05:36:16), first LSN: 184193:4075900:1, last LSN: 184193:7288500:1, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'w:\LogB\TCP_20110822213010.trn'}). This is an informational message. No user action is required.
2011-08-23 17:28:00.88 spid52      Error: 14421, Severity: 16, State: 1.
2011-08-23 17:28:00.88 spid52      The log shipping secondary database TCCDBM1.TCP has restore threshold of 45 minutes and is out of sync. No restore was performed for 2 minutes. Restored latency is 716 minutes. Check agent log and logshipping monitor information.
2011-08-23 17:28:34.03 Backup      Log was restored. Database: TCP, creation date(time): 2011/07/03(05:36:16), first LSN: 184193:7288500:1, last LSN: 184193:10880343:1, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'w:\LogB\TCP_20110822213511.trn'}). This is an informational message. No user action is required.
2011-08-23 17:28:53.06 spid65      Error: 824, Severity: 16, State: 2.
2011-08-23 17:28:53.06 spid65      SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 20:5746350; actual 0:0). It occurred during a read of page (20:5746350) in database ID 5 at offset 0x00000af5d5c000 in file 'l:\TCPDATA4\TCPDATA19.ndf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
2011-08-23 17:30:00.54 spid52      Error: 14421, Severity: 16, State: 1.
2011-08-23 17:30:00.54 spid52      The log shipping secondary database TCCDBM1.TCP has restore threshold of 45 minutes and is out of sync. No restore was performed for 2 minutes. Restored latency is 713 minutes. Check agent log and logshipping monitor information.
2011-08-23 17:30:35.94 spid53      Error: 824, Severity: 16, State: 2.

Hi Dennis!
I understand your reasonable doubt, but think that physical corruptions are 99,999...% caused by a hardware failure e.g. a defective RAM module, or a related, low-level failure as e.g. an outdated NIC driver, etc.
Then, in this case it is clear that you have a platform problem only on your standby system, and not in the one running productively right now.
Maybe you already checked your platform, but you should take into account that in most cases just reading the logs is not enough; stress tests on all of the components are usually necessary. Most of the time, when we analyze hardware related problems, the problem is only reproduced when special tests are performed. Furthermore it is possible that more than one component is weak or broken.
My recommendation is that you check the components in this order:
   - disks (complete surface) (while SAP and SQL Server are shut down)
   - disk controller
   - Memory (stress test)
   - CPU
   - all other components
Consider that restoring a backup and running in a damaged platform would imply further problems. You would be waiting until the next problem arises and that would imply a system halt or corruptions, maybe even with data loss.
Once the hardware checked and -if necessary- fixed, you can proceed as explained in SAP notes 142731 and 1420452. Of course you can also restore in a different hardware, but remember checking the platform as it is also exposed to hardware failures.
Cheers!!
--Jesú

Serious log in issues after installing Lion Server

Hi all,
I am relatively inexperienced with software involving essentially anything technical, so you will have to pardon my ignorance.
I am currently trying to set-up a wireless network at home using Lion Server, and it would appear I have bitten off more than I can chew. I installed Lion Server on Tuesday, and have been battling with it ever since - attempting to use a 'We Got Served' guide to walk me through.
I installed the Server app on my iMac as I figured the 3 computers on the network would not require very much space, and so there would be little point in buying a whole new machine to run it from. Whilst I was having little luck in making it work as I had hoped - I have now managed to completely lock the iMac. Since it's installation I have had no issue logging in and out of my actual account on OSX, however earlier the computer froze following an Adobe update and I was forced to do a hard restart. However, when I attempted to log back in I now get the following error:
"You are unable to log in to the user account "xxxx" at this time.
Logging in to the account failed because an error occurred."
I have tried everything in my limited knowledge to rectify this, and nothing works it would seem. I've read examples of this happening when trying to log into the actual server app, or where the hard drive is corrupt on the machine itself - this seems to be a hybrid of the two.
I can no longer open the computer in Safe Mode, however when I go into Disk Utility all disks when verified appear to be absolutely fine with disc repair making no difference. The only available drive is now listed as a Server drive so I cannot even re-install Lion on there.
This is causing me much distress as I can as far as I can tell not only log into my computer, but can do nothing to repair the issue bar erasing everthing from it. There is a lot of important data on there and I am confident that it is not actually corrupt, however Server seems to have just locked it completely.
Help would be much appreciated!

I am having a similar issue, but in my situation, my users cannot log in. All of my users are network users on Mini's. I am running 10.6.8 on my server. I have created users before with no issues, but have not done so in months. When I try to log the new user in, I get the following error:
xpchelper: Could not get path of user account (uid:1029) home directory:/Network/Servers/server.xxx.net/Volumes/Data/Users/username; error; The operation couldn't be completed. No such file or directory. Using home directory.
CFPreferences: user home directory at file://localhost/Network/Servers/server.xxx.net/Volumes/Data/Users/username/ is currently unavailable. User domains will be volatile.
Authorizationhost: error |-[homedirmounter mount NetworkHomeWithURL: attributes: dirPath: username:]|PremountHomeDirectoryWithAuthentication (url=AFP://server.xxx.net/Users/homedir= /Network/Servers/server.xxx.net/Volumes/Data/Users/username, name=username) returned 5.
I have no idea of what to do. I have verified that the user looks the same as my other users in WGM. The user's folder was created on the server. The user has access to the folder. I'm not sure what else could be wrong here.

Log Corruption Issue

Similar Messages

Maybe you are looking for