"Logic Control" Assigned to "Session 1" Message

Hello fellow Logicheads:
Running Logic 10.0.7. Here's the message:
I have checked to make sure that all interfaces are connected and switched on. Checked the MIDI port setting of Logic Control, reset all MIDI drivers, yet message persists.
What am I missing?
Thanks!!

Hi
I am guessing that the "Logic Remote" is/was a device connected over wifi using an AudioMIDI Setup network session?
Open AMS and check that all is correct there.
CCT

Similar Messages

BCF2000 - assigning within Logic Control Mode

I am using a Behringer BCF2000 with Logic 7 Pro on a G4 powerbook. My BCF2000 is working fine in Logic Control Mode (USB Mode U-3), what I would like to do is add a few of my own parameters, mainly logic's tape delay feedback (as I make dub) to one of the dials, for example.
Also I would love to be able to trigger a few sound effects (maybe an exs patch) using an assigned button, for those on-the-fly dub vibes.
I sussed the patch editing and storing in the normal factory mode, but in Logic control mode, I can't seem to create my own patches and store them. Is this possible? and if so, how can I "learn" the functions like tape delay feedback.
Any help would be greatly appreciated! Thanks guys!
Ben (Brazil)

I sussed the patch editing and storing in the normal
factory mode, but in Logic control mode, I can't seem
to create my own patches and store them. Is this
possible? and if so, how can I "learn" the functions
like tape delay feedback.
Any help would be greatly appreciated! Thanks guys!
Ben (Brazil)
I have not been able to program mine in LC emulation
though I have been able to program the other presets.
Something I have not tried yet is trying to program the
many parameters in the controller assignments window.
I have discovered that by having the BCF in LCmode
going to the Controller Assignments window and
selecting expert and follow then clicking on
the different modes and such that the BCF
responds to what you are choosing on the screen.
I have not had the time yet to confirm this but
I believe the BCF is already preprogrammed to
do many of these in LC emulation. For example when I choose
track on screen the BCF would change its display
to "tr" and so on. This is a big discovery for me since
I new that in LCemulation the Unit was capable of
accessing all or most of what a Mackie Logic Control
unit could. I could never figure out how to get to those
parameters. This is one way to figure it out I suppose.
Behringer suggests that you read the docs for the Mackie,
I have not found this to be too helpful yet. Hope this helps.

Keystation Pro 88 (or other controller) as the Logic Control

Has anybody got their setup like this? I've been trying to get this to work for the past 6 hours and no luck. Can someone please help me? Just bought Studio 2 days ago and haven't touched it yet cuz I can't get the keyboard to fully work.
Joined: 17 Jan 2006
Posts: 55
Location: Los Angeles
Posted: Sun Jul 15, 2007 12:03 am Post subject: Keystation Pro 88 (or other controller) as the Logic Control
I'm sure some of you already know how to do this. I just figured I'd write this up at some point to share with others. The basic idea is to use the Keystaion Pro 88 (or some other MIDI Controller) as an actual Control Surface, or in this case the Logic Control, to have more freedom with the MIDI Controller, i.e. using the group of 8 faders (on the Keystation) to control Volume for tracks 1-8 in the arrange window, and then hitting Bank Right to automatically control tracks 9-16, and as a result making a universal controller not bound by specific channel messages, or MIDI CC Volume messages etc... in short the essence of any Control Surface.
What I'm describing below is what this app will also do: http://www.opuslocus.com/lcxmu/index.php
I basically just wanted to avoid using a separate application all together. Keep in mind that the app does simplify the whole process, but Logic inherently can do pretty much everything the app does.
I recommend reading this in its entirety before attempting.
KeyStation Pro 88 as Logic Control
Part One: Add Logic Control as Control Surface
1. Open Logic.
2. Preferences / Control Surfaces / Setup...
3. New / Install / Select your preferred device (in my case Logic Control
4. Click the icon in the setup window for the Logic Control.
5. On the left hand side under "Logic Control" you should see an "Out Port:" and "Input:" ... select the desired MIDI in/out through which your device is connected.
6. Open Preferences / Control Surfaces / Controller Assignments. Make sure you select the "EXPERT VIEW" check box.
7. You should now see a bunch of different Zones in the Zone column, one of which is "Control Surface: Logic Control"
8. Create your own Zone, KeyStation Pro 88 (or whatever) using the Plus sign in the bottom left corner of the Controller Assignments window.
9. Now basically go through the existing parameters already available in the Logic Control Zones, Select what you want. You can select entire Modes or individual Controls / Parameters. You can select multiple values (only multiple Control / Parameters NOT modes) by selecting and dragging or simply with select and holding command.
10. Command-C the selected Modes and then click back onto you user zone that you created above.
11. Click inside the Mode column (or Control / Parameter column depending upon what you selected and copied from the Logic Control zones).
12. Command-V to paste the Modes into your user Zone.
13. Do this for as many Modes / Controls you want, that your specific MIDI controller interface will be able to handle.
Part Two: Assigning Input Values
1. Open Preferences / Control Surfaces / Controller Assignments
2. Now for each parameter that you copied, you will need to set the input MIDI value from your controller.
3. Click on your User Zone, then Mode, then the first parameter in the 3rd column.
4. You should see a "MIDI Input" option (this should already be set correctly as long as you set it earlier in Step 5 of Part One). If it's not set to the correct MIDI input (which I found to be the case sometimes even after Step 5), then change that here.
5. Next to "Value Change:" you will see a box with MIDI data in it. Delete the existing date by highlight and delete.
6. Activate "Learn Mode" (bottom right corner of Controller Assignments window) then click within the "Value Change" box, then move the corresponding fader, button etc. The "Value Change" should now show the MIDI data value for that fader. Be careful here, there should only be 3 groups of 2 for data here... if you see 2 groups, of 3 groups, of 2 then typically the FIRST group of 3 should be the value you want here. You can always delete the data, and move the fader again to be sure. The reason for the 2 groups of 3 is not in error: some buttons send TWO MIDI values, one on press and one on release. You can use this to your advantage and assign TWO different functions to these buttons, thus the first (press hold) value can do one thing and the second (release) value can do another. You can also change the MIDI controller to only send 1 message on press and nothing on release, or simply make sure that only the on value is present in the "Value Change" box.
7. You'll have to do this for all the different knobs / faders etc. on your MIDI controller. There are many shortcuts of course. You can manually type in the Values if you know them. For the Keystation Pro, M-Audio has an app called Enigma that I recommend for changing controller parameters and much more on the Keystation. You can use this app to assign all the actual control data that each button or fader sends to the sequencer, once you know the values you can convert that data to the MIDI data values and enter them into the Value Change box.
8. Once you're done assigning values to the controllers, you can delete all the Zones except for the user Zone you created earlier. Before you do this, it's a good idea to back up the Control Surface preference file just in case you ever want to grab something else from the Logic Control Zones. You could always add a second Logic Control and copy the Zone from that, but you'd have to reassign all the MIDI Input: values ... short version, just back up the preference file before you delete the Zones. The reason why you want to delete the Zones that you're not using is simply because if you have a controller that happens to send out MIDI data to the sequencer, and the actual Logic Control happens to have that MIDI data value already inherent it it's Zones, then you could be asking for trouble, simply put you'd be sending MIDI data to change Volume and the Logic Control maybe has that MIDI Data Value already assigned to Pan for the existing track.
The file to backup is located here: ~Users/username/Library/Preferences/Logic/com.apple.logic.pro.cs
As a precaution I have always backed up my Logic Preference file WITH this .cs file. Technically it's not necessary... for instance: Let's say you trash your preferences and open Logic to find that the Logic Control is missing from the Control Surfaces Setup. So you add it back and now you find out that Logic is missing the User Zone that you created. If you close Logic and copy the .cs file back to the directory above, then upon reopening Logic you should find your User Zone is in place again. But I've had mixed results with that, so just in case I copy over the preference file with the .cs file as a pair. It seems that the Logic pref file only contains information that the Logic Control is a Control Surface on your system and the .cs file is the preferences for that specific Surface.
Another note: after a recent Logic update, maybe 7.2? ... it was whichever update added support for more Control Surfaces, I can't remember. This update basically erased all the hours of hard work linking the Keystation to Logic as the Logic Control. This only happened with this specific Control Surface update, but not with 7.2.3, probably simply because they didn't make any changes to the .cs pref file.
Anyhow, when this happens again in the future, there seems to be a quick fix. I take NO responsibility for you somehow crashing Logic on a continual basis after applying the fix. Personally I have seen NO issues by doing this at all. I simply copied a version of the .cs file with the new update missing the Keystation Zone, as well as a version of the .cs file WITH the Keystation Zone, to a PC (I think it was a PC, don't believe I tried it with textedit, although should work as well). I opened both of the files in notepad and compared them. I noticed the word Keystation towards the bottom and realized that most all the data (gibberish) was exactly the same up until a point in which the file with the Keystation data had a group that was absent from the new .cs pref file from the new update. So I basically copied the data from the old .cs pref file, pasted it into the new .cs pref file, saved it and open Logic. Logic warned me that a pref file was corrupt or something of that nature, but loaded fine anyway, and the Keystation Zone was back in Controller Assignments.
One last thing... the problem that some of you may run into is that by making your MIDI controller a Control Surface, or turning your Keystation Pro into a Logic Control, limits some of the functionality of the MIDI Controller. For instance, a Logic Control's main purpose is to control different faders, knobs and what not of MANY different tracks. When you move a fader for volume on the Logic control, it will move the fader corresponding to the selected track... it's not programed to say change the actual midi CC 7 for Volume, only the actual Fader. Thus, what if you want the MOD wheel to still control modulation and you want the sustatin pedal to continue to act as a sustain pedal. Well, if Logic sees that Port 1 is the input for the Logic Control, but in reality the Keystation, then it's only going to allow specific events through. The way around this issue is by using both the input options that the Keystation has... hook the MIDI out into Logic and use the USB port as well. I run the Keystation as a Logic Control through the USB port, and use the MIDI out for actual MIDI data. But the catch is you have to make sure you only connect the MIDI Port into Logic's sequencer in the environment. Thus open the environment, open Clicks & Ports, Port 1 and Port 2 are the IN/OUT for the USB port. Midi Port is the Keystation's MIDI port. Select and delete the cable for the SUM, and run individual cables for the ports you want to use. Thus, all your other MIDI interface Ports, the Caps Lock keyboard etc. Just be sure that if your using Port 1 (USB Port Out from Keystation) for the fake Logic Control, that it DOES NOT cable into the "Input View" or "to Recording & Thru". This creates yet another issue:
The controls on the Keystation have to send SOME form of MIDI control message / data to Logic. Well if the faders on the Keystation are preset to send Ch1-9, Volume 0-127 messages, then when you move a fader on the Keystation (as the Logic Control) since the Keystation is still reaching the sequencer from the MIDI port, you will be sending MIDI values that can effect your current track possibly when you don't want to. The work around for this is to be sure that all the faders / knobs that you want to use as your fake Logic Control are sending useless MIDI data... i.e. CC 75, 76, 77, and so on. This way moving faders won't effect playback, although you could still in theory record this MIDI data into your sequencer. You could however filter this events from entering the sequencer input with a transformer since you know precisely what MIDI CC values you are changing. The easy way to assign these values is to use the program Enigma from M-Audio that I mentioned above.
More discussion specifically related to the Keystation Pro 88:
You can do a lot using the Controller Assignments and different Zones from the Logic Control. For instance, the real Logic Control has Solo, Mute, and Record buttons for the 8 faders. The Keystation Pro only has 1 button underneath each fader. But you could use one of the other buttons to toggle Solo, Mute, and Record mode so that depending on which mode your in, the buttons underneath each fader will correspond to Mute or Solo etc. By the way, a good setup from my experience is to use the first 8 faders of the Keystation as the track faders, and the final 9th fader for Master Volume. You can then set two of the buttons underneath the Knobs as Bank Left and Bank Right buttons to change the 8 fader tracks to correspond to the onscreen track groups of 8. Also don't forget that you can assign TWO functions to EACH button, since a button press can send a value of 127 and a button release can send a 00 value. So if you press and hold a button it can activate "Shift-select Mode" and until released it can make the buttons under the faders act as Volume to Zero resets or whatever you want. When you release the button it will go back to just Mute mode or Solo mode. The Controller Assignments window has MANY options, and parameters some of which are very confusing and take a lot of trial and error to understand... the manual helps a little but of course isn't perfect.

I'm thinking about buying a Keystation Pro 88 (2nd hand) so I was googling around and found this:
http://www.soundonsound.com/sos/Oct04/articles/keystation.htm
[quote]
I had some trouble getting the transport controls to work with Emagic's Logic, even when I loaded the 'Pro 88 Logic Preset.LSO' file on the supplied CD-ROM into Logic. I contacted the guys who designed and set up the Keystation here in the UK at the old Evolution offices, and between us we managed to work out what was going wrong. First of all, you need to enter the appropriate MIDI key commands in Logic's user preferences. These cannot be updated with an LSO file, so the commands have to be entered using the Learn Key function in Logic (see the screenshot below for the list we used). Then we discovered that the transport keys were toggling, which meant that only each second press of each key was actually working. It turned out that I had an early version of the Logic preset before this had been fixed, but the more recent one has been put on the M Audio web site for anyone else that needs it. It took about 30 seconds to change the output commands so that the buttons were no longer toggling.[/quote]
Did you get it to work correctly eventually?

Logic Control difficulties with 8.0.2 anyone?

Hello to all
Just a quick check to see if anyone else is having problems with the Logic Control surface and the 8.0.2 update. To date the zoom function and the fast forward/reverse buttons are not working on my system, which is a G5 Dual 2ghz Tiger 10.4.11. Also, the undo button doesn't undo and the assignment buttons don't assign.
Regards

[edit]
still doesn't work at all... though I can 'solo' the AUXes... just not select them.
If I try to select them and add an EQ (EQ+Vpot8), it adds an eq to the channel that has the visual select light lit!
Message was edited by: mattrixx

URGENT ! JDEV 10.1.2 Problem with data control generated from session bean

I got a problem with data control generated from session bean which return a collection of data transfer object.
The dto's seem to be correct. The session bean load correctly the data into and the object's are plenty of data. Using the console to display the dto content is ok.
When generating a data control from this session bean and associate the dto included in the collection only the first object level and one-to-one dto object are correctly setted in the data control. Object that represent collection into the dto (one-to-many foreign key) are setted as collection with an iterator but the structure of the object is not setted. I don't know how to associate this second level of collection with the dto bean class to obtain the attributes definition.
I created a case with hr schema like the hrApp demo application in the tutorial with departments and employees table. I got the same problem.
Is it a bug ?
It exists a workaround to force the data control to understand the collection data structure ?
Help is welcome ! this is urgent !!!

we found the problem by assigning the child dto bean class to the node representing the iterator in the xml file corresponding to the master dto.

Logic Control broken by Logic Pro 8

My Logic Control, which has worked fine from Logic 5 to 7, now in Logic 8 has become almost inoperative.
1. the "save" button no longer works. It should not need assigning, according to the Apple Logic support guy, who is getting the same problem with his Logic Control. No solution yet.
2. the track display behaves erratically. When moving a fader, that track suddenly reads "volume" in the display, and won't go away. the track next door to the right of it immediately loses its name. Normally, this would never happen. the track is restored to semi-normalcy by pressing the "zoom" button - which, far as I know, is not the function of the zoom button, anyway.
Tried deleting and reinstalling Logic Control in the Control Surfaces prefs. No change.
Just thought I'd post this in case anyone out there is experiencing the same, and, hopefully has come up with a solution. help

ambient8 wrote:
I'm not denying that. I am quite aware that Logic 8 has issues. Being factual is important though. Especially when bringing credibility into question. If Logic causes you so many problems perhaps you should consider migrating to a new DAW. Gotta be able to enjoy your work. Pro Tools 8 looks quite tempting to me actually.
Cheers
Factual is every bit as important as literate.
I use Logic 7. In Logic 7 the control surface works perfectly, the audio output is not corrupted at the 2nd bit and all of the audio configuration functions are intact. None of this is true in Logic 8.
And please note that by saying that logic 8 is causing "me" so many problems you imply that these are not real issues, but apple have admitted to these issues and done NOTHING for "6 months".. Am I supposed to use defective software or do my job?
So please tell me why did you advise me to ditch Logic 8 (which I have stated that I DO NOT use) and moving to another DAW?

Logic Control Track Lock

I do not want the Logic control to follow selections in the arrange when I select tracks in Logic. The manual says that if I turn Track Lock on, then track selections in logic will not effect the logic control, but it makes no difference when I turn it on. Is this a bug or am I missing something. I have 3 xts and I want them all to never change fader groups.

But LC does not relate to the Environment audio mixer, it relates to the Track Mixer. If you want your audio mixer in the environment to relate to LC, you''ll have to arrange the objects to match the track mixer.
BTW an easy way to make sure the track order matches the order in your environment is, when you set up the song, select and drag all the audio objects in the environment into the tracklist. (drop them on Track 1)
Generally this is only a good idea at the start, before you have any regions in place in the arrange tracks, as, if you do it when you have content, the audio in the tracks will be assigned to different audio objects to what they were originally. (Although, you can get around this, by cutting all the track content then changing the order, as I described, then doing: 'paste at original position' and select 'keep Inst.' in the dialog which follows.)

Logic Control - XT display not resonding, noise coming thru midi....

I have a Logic Control and a Logic Control XT. XT on left, channels 1-8. Display on XT lights up, but doesn't recognize tracks (faders and other controls, do however).
"Midi in" on XT causes noise in my monitors (don't tell me it's impossible because midi sends 0 or 1 -- it IS causing interference in my monitors). Can bad midi cables or a bad midi interface cause noise?
Is my set up somehow incorrect?

I have a Logic Control and a Logic Control XT. XT on
left, channels 1-8. Display on XT lights up, but
doesn't recognize tracks (faders and other controls,
do however).
So everything works, but you get nothing on the display? When you power it up, do words come up on the display then (like a "Logic Control XT" welcome message?)
If not, perhaps the display has died?
"Midi in" on XT causes noise in my monitors (don't
tell me it's impossible because midi sends 0 or 1 --
it IS causing interference in my monitors). Can bad
midi cables or a bad midi interface cause noise?
You might have some kind of ground loop issue, which seems unlikely seeing as MIDI cables don't have a direct electrical connection.
It may be that your computer causes interference when sending MIDI (nothing to do with the Logic Control). Early motherboards, for instance, gave audio problems when using USB MIDI - I had an old motherboard which gave clicks in the audio drivers when sending MIDI via USB, which is why I used the serial bus MIDI instead, and that solved the problem.
Is my set up somehow incorrect?
Difficult to tell from just the info you provide!

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
VIBAC

I downloaded and installed
OS X Lion 10.7.5 Supplemental Update
and that solved my problem completely. (368 AU plugins now works!)

Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2. I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message. This only started happening yeste

Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2. I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message. This only started happening yesterday. Anyone else having this problem? Thanks.

I am having the same problem and took the following steps to mitigate it to no avail.
1. I deleted the Facebook app on the phone and turned off Facebook in the iPhone's system-wide settings.
2. I re-enabled Facebook in the iPhone's system-wide settings and reinstalled the Facebook app and logged in again. It worked. For about an hour.
3. I completely restored the phone to a previous backup (before the problems started) and reenabled Facebook .... reinstalled the app.... and now it works intermittenly. But it hasn't worked in about 12 hours now (just tried a few minutes ago).
Please advise.

Resource control assignment failed for project

I've setup a new project (we run sap), and keep getting the following msg
pam_unix_cred: project.max-sem-ids resource control assignment failed for
project "PAB"
I know you can get this sort of msg if you have wrong syntax in your project, but it all looks well to me. Any ideas gratefully received. cheers Lou
/etc/project >
PAB:1000:SAP System PAB:orapab,pabadm::
process.max-sem-nsems=(priv,2048,deny);project.max-sem-ids=(priv,1024,deny);project.max-shm-i
ds=(priv,256,deny);project.max-shm-memory=(priv,18446744073709551615,deny)

Hi
The original entries were created with projadd.
I've just done a projdel and another projadd (as below) and watching out for error msgs - will post again when I get the error msgs - cheers Lou
root@sappab # projadd -p 1000 -c "SAP System PAB" -U pabadm,orapab \
root@sappab > -K "project.max-sem-ids=(priv,1024,deny)" \
root@sappab > -K "process.max-sem-nsems=(priv,2048,deny)" \
root@sappab > -K "project.max-shm-ids=(priv,256,deny)" \
root@sappab > -K "project.max-shm-memory=(priv,18446744073709551615,deny)" \
root@sappab > PAB
root@sappab # more /etc/project
system:0::::
user.root:1::::
noproject:2::::
default:3::::
group.staff:10::::
PAB:1000:SAP System PAB:orapab,pabadm::process.max-sem-nsems=(priv,2048,deny);project.max-sem-ids=(priv,1024,deny);project.max-shm-i
ds=(priv,256,deny);project.max-shm-memory=(priv,18446744073709551615,deny)

How to instantiate a database control in a session bean (Weblogic 8.1)

Is it possible to instantiate a database control in a session bean?
in a jsp i invoke "WlwProxy.create" method with an HttpServletRequest Object,
ther's another "WlwProxy.create" which take an URL object instead of an HttpServletRequest one, i've tried to use it with the URL of my database Control class,
I've tried two ways :
1- URL url = new URL(C:\bea\user_projects\.....\MydatabaseControlclass")
2- URL url = new URL("http","localhost",7001,"nameOfPackege/MydatabaseControlclass");
But it failed
Does anybody here know how to use "WlwProxy.create" with an URL object ?
Thanks.
Edited by concerto at 04/19/2007 6:29 AM
Edited by concerto at 04/19/2007 6:36 AM
Edited by concerto at 04/19/2007 6:43 AM

Hi Gautam
I don't think Database control has any attribute on Role.
The database control takes the connection from the datasource that is specified in the jcx. I am not sure if there is any attribute at the connection pool level that will allow you to set a role.
Or you can call a method in the dbcontrol that executes a set role.. statement and then run other methods.
Thanks
Vimala

Partner "10000" is not assigned to Customer "5000012" - Message No: F2182:

Hi Guru's,
I am trying to assign the contact person - 10000 to the customer - 5000012 in the customer master and the system is poping up the message: Partner "10000" is not assigned to Customer "5000012":
Message No: F2182
I have seperate account groups for customer and the contact person.
And these both customer groups are configured properly inthe partener detrminatin proceedure also.
Then where is this problem is coming from?
System is though showing the warning pop up message but it is allowing to save alsong with the given contact person values.
I am surprised, please help me!
Thanks in advance.
SKUMAR

Hi Guys,
This thread has been answered by my team mate.
Solution: Just go to vap2 and create contact person for the required customer, and assign in the customer master.
Thank you all.
Have a great day,
sushil

L8 is seeing my Axiom as a Logic Control and it's wreaking havoc!

A new twist on all the control surface issues - I have a M-Audio Axiom 25 connected via USB and it's not setup in anyway as a control surface via the control surfaces preferences. I have never used it as such and never need to because I own a Logic Control.
All of the sudden, L8 is recognizing midi note input from the M-Audio as LC input - i.e. if I press an A3 it doesn't sound a midi note, but rather performs a specific Logic Control function as defined in the Key Command Preferences.
Of course, it's even worse because I have an Apogee Ensemble so Logic doesn't even recognize a potential Control Surface unless everything is powered up in just such a perfect way.
So I have a Logic Control that isn't recognized, and an Axiom 25 that is recognized as something it's not and if I go to Control Surfaces preferences, it's as if the world of cotrollers doesn't even exist because the master list of options is gone baby gone.
Anyone find a workaround for this?

totally different ports!
The LC is connected via my AMT8 - the Axiom is on it's own port via USB, so that shouldn't be issue.
I've tried cabling the Axiom port directly from the input object to a monitor and then terminating the connection just so I can see what it's transmitting - the "bad" notes don't show up as anything in the monitor and even though I've broken the Sum cable from the input object and the Axiom port is only cabled to a monitor and nothing else (the Sequencer input is not connected to anything at all!), L8 is receiving those key presses as LC commands.
So strange

Logic control in JSF's jsp

Hello I have fundmental question to ask;
In Struts or JSP page, you can use logic control to determine what will display. For intance, the tag on strut <logic:match> <logic:equals>. I am wondering how to have this sort logic in JSF. Thanks!

Thanks guys!
the simple solution is what you said:
in JSF page, binding rendered to a propertity in the bean. on the bean create the property - method to have the logic to return true or false. Do you think if it is a better solution than using jstl -- I dont know too much JSTL - I am more service side developer such as proxy service, application server to host tcp connection from clients...

"Logic Control" Assigned to "Session 1" Message

Similar Messages

Maybe you are looking for