Logic Pro 9 When I open a file which contains a composition of many midi and audio tracks, no sounds play or some tracks are playing the wrong sounds. The project was working perfect when it was saved and closed down.

Does anyone else understand what is happeneing, its like all the tracks and plugins are confused and are playing all the wrong sounds if at all. I've checked the audio setting which seem fine but cant understand where it all goes horribly wrong. Thanks

Is it just a Logic problem; can you for-instance play audio in iTunes trough the Tascam? And what about new projects; you get audio there?

Similar Messages

I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. Where can I download ios 4.3.5 from?

I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. My pc didn't create a backup before updating software so I can't revert back to ios 4.3.5 from there, where can I download ios 4.3.5 from?

I tried just about everything and finally brought my Ipod touch to the apple store. The tech installed ios 4.3.5 but still no WIFI. He recommended a $149 exchange - not really a bad deal with a new battery and 90 day warranty, but I thought I'd try again.
The "solution" was bizarre. On YouTube was a fix involving taking the motherboard out and heating the wifi components with a heat gun.
I did not like that idea, but another involved turning it off, putting it in the freezer for five minutes and restarting. It worked! I must admit the fix does not work reliably, so I may still go for the exchange. Still, I am now convinced that it is a hardware problem. i remember back in the old days, TV repairmen sprayed a suspected bad resistor with Freon. The chilled component would work long enough to identify what needed replacement. Perhaps something similar is happening here.
For anyone wanting to try this, I found it more convenient to place the back of my ipod on a frozen cold pack until the wifi is restored. It seems to happen when condensation forms on the face. I used a towel to wipe off the moisture so as not to add to the problem.

I recently updated my iPhone 3GS now my maps application always gives me the wrong current location. It worked fine before it was updated during my last sync. How do I fix this?

I have an iPhone 3GS 16gb not jailbroken, that I just synced and updated to the latest fix. Before my google maps was working perfectly but since I updated it always gives me a current location that is about a half mile off in any direction. I have tried several hard resets to no avail. turning off my wifi, nothing. Turning off my location services-reset-then turn them back on, again nothing. Tried resetting network settings with the auto lock on never. Rebooted.. Nothing again..
Help!!! What's the score here? What comes next?

yes, you can update to the latest iOS, that would be the first thing AppleCare would have you do
doing a restore and then putting your information right back on the device is not a troubleshooting step. If anything, you wipe out the issue and then have put it right back on your phone. It would be better to restore as new

My 16b 3gs was working perfectly. The battery died and I plugged it in correctly to charge and it also neohook up to itunes for restore. It also had a little exclamation button that reads: IMEI:unknown and just below it read ICCID: Unknown. Nothing else

My 16gig ipone 3gs was working perfectly since it was replaced only a month or to prior. I was visiting with some friends around the ole pipe and low and behold the phone was completly dried of it's go juice. One we noticed I reached into the kitchen and plugged it in to the outlet.,,, The battery died and I plugged it in correctly to charge and it also said Emergency calls only in various foriegn languages. It also said to plug it into your itunes. All the while haviing no calling options to say the least. I followed the apple instructions perfectly when it said that there was a new version of itunes I should download first, prior to refreshing it. It went through all of the installing and so on then at the end you still get a useless phone that doesnt work. IMEI: unknown and ICCIC; unknown (both of which can be found by you on the box or on the sim card case. I completley removed the sim card and it worked in my hubbies 3g.   I tried several times and also AT&t had made sure the imei and iccic where correct. So I spent hours getting nowhere with this. Its new and nice and broken.. Im going to leave that Apple store with a brand new iphone 4 tomorrow. Simply b/c it is for my pain and suffering and for giving me a crappy refurbished phone. Fair is fair. So if you've found a way to fix great, but Im going to get that free iphone 4 xoxo toodllloooo

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My iPad was working perfectly fine and then it just turned off and wont turn back on. it had around 60% battery what do i do?

i need some help. my iPad was working perfectly fine about 20mins ago and then it just turned off and wont turn back on. its was at about 60% when it stoped working so i have ruled out the fact that its dead. ive tryed turning it back on but it wont please help.

Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up
EDIT - sorry TeeKnows. I was too slow on the draw. My apologies.
Message was edited by: Demo

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

When i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th

when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
if you can help me thank's
[email address removed by host]

thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode

My speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

my speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

Thanks for your solution, it wasn't quite what solved the problem but i remembered that i had a bit of salt water on my phone recently and spraying the charging port with an anti-oxide spray solved my problem, do you mind if i ask, how is the charging port related with the volume or/and speakers?

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Firefox freezes when opening a window with PDF files, etc., yet it works perfectly when using explorer as browser.

I think Firefox mozilla is having issues with Adobe reader. It frequently crashes. I think this may be why my computer freezes when pulling up a PDF file or other text windows, yet, everything works perfect when using Explorer as my browser. It is so frustrating using Mozilla because it gets stuck when opening windows which require pulling up certain types of texts or applications, then I have to wait forever, or, reboot, and once in a while it gets so stuck that I have to take out battery and remove all power sources then start from scratch, and set my computer back to all settings previous to failure. Like I said, this only happens with Mozilla, all other browsers work perfectly well, but I love my Mozilla and it is my preferred browser. Please help. Thanks so much,
susan

Hi Susan,
The Adobe plugin in Internet Explorer is a bit different from the one in Firefox, however they're all made by Adobe and they usually come with Adobe Reader.
When you open a PDF file in Firefox, it "calls" Adobe Reader to help it read the file. In this case, the Adobe Reader takes over, and it is responsible for freezing your browser.
I suggest you try the last 4 solutions presented on the [[Opening PDF files within Firefox]] (start with "Re-install the plugin" through "Re-install Adobe Reader").
Good Luck :D

When i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

When I open a file in bridge my files are no longer in numeric order and appear to be scrambled in exposure values

When I open my files in bridge with CC, the images are no longer in numeric order but scrambled in what appears to be exposure values. When I use the CS5 software the files are fine so that should rule out a hard drive problem. It is a consistent problem with all hard drives on CC and is accurate on those same hard drives with CS5. Any ideas on how to correct this problem?

Thanks for letting me know, Helene Nice that I was able to get someone here on their way.
Have a pleasant evening!
Gene

My Ipod shut off and wont turn back on even when its been fully charged, and it was working perfectly fine 4 hours ago. What do I do?

I don't know what happened as it was working perfectly fine, and all of a sudden it shuts off and even when I pressed down on the on and home buttons at the same time, it wouldn't turn on. I don't know what to do.

Try here:
iPod touch: Hardware troubleshooting

HT1338 Hi I have an Imac with I5 processor.It was working perfectly and i didnt use for about 2 months.The AC was unpluged.Then week ago when i want to start the Imac, it didnt start.But if i keep holding or pressing the power button for some times then i

Hi I have an Imac I5 21.5 inch.It was working perfectly.Then i didnt use that for about 2 months. Week ago when i want to start the Imac ,it didnt start.
When press and hold or keep on pressing the power button then i hear the fans are working and i get a continuous beep( but low freqency tone).
But screen does not turn on.Please help me to rectify this problem.Best Regards. By the way I am an electronic technician.So if there are any technical things to be done, Pls let me know.I can do it my self.

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

I have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?

i have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Malvinfromny wrote:
... i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

Logic Pro 9 When I open a file which contains a composition of many midi and audio tracks, no sounds play or some tracks are playing the wrong sounds. The project was working perfect when it was saved and closed down.

Similar Messages

Maybe you are looking for