Logic pro download issues PLEASE HELP!!!!!

I just downloaded logic pro and it asked me to download extra content...i passed up on it by mistake and can't figure out how to access it again to download?? Please help!!!

Simple...
Start Logic
Go to Logic's Menu Bar at the top of the screen.
Click on Logic Pro in the bar
Click on "Download Additional Content"
Select what content you wish to install (I'd install it all...)
Wait a while (depending on how fast or slow your internet connection is..)
Done!

Similar Messages

Logic Pro 9: Playhead/Playback/Audio Levels/Logic Pro X Issue, PLEASE HELP!

When I press play within the project, the playhead doesn't move from left to right with the audio like it should. As well as within the mix window, the audio levels are not displayed. However, when I click and hold within the arrange window, everything is fine and working properly, but I'm not going to be holding down the mouse the whole time I'm working on a project.
Does anybody have any sort of advice for me at all?
Also, if I were to buy Logic Pro X, would all of my projects currently running in Logic Pro 9 be able to open up in Logic Pro X? I also have the Waves Mercury Bundle, Vangard and Antares Auto-Tune, would all of those work with Logic Pro X?

When I press play within the project, the playhead doesn't move from left to right with the audio like it should. As well as within the mix window, the audio levels are not displayed. However, when I click and hold within the arrange window, everything is fine and working properly, but I'm not going to be holding down the mouse the whole time I'm working on a project.
Does anybody have any sort of advice for me at all?
Also, if I were to buy Logic Pro X, would all of my projects currently running in Logic Pro 9 be able to open up in Logic Pro X? I also have the Waves Mercury Bundle, Vangard and Antares Auto-Tune, would all of those work with Logic Pro X?

Logic Pro 9 update - PLEASE HELP!

Hi.
I upgraded my computers to the newest Mac Pro which have Mavericks.
I have problem with Logic Pro - it has strange black lines, which makes it difficult to work.
I wanted to update my Logic Pro (version 9.1.6) but it says I have to do it via Apple Store and apple store app says there are no updates available.
How can I update it?
Ps. It is spelled "Logic Pro", and there are no other copies of Logic on my computer.

First, you must be signed into the Mac App Store using the same Apple ID that you used to purchase Logic in the first place....
check the the purchse tab in the App Store app... To confirm you are signed in with the correct Apple ID as Logic Pro will show up there if you are. If not you are not signed into the App Store with the same ID used to purchase it initially. Use the menu option Store.. To sign out and sign in again with the correct ID
now check updates again.....
if that that desnt work.....
Copy your Logc app to an external drive, delete the copy in your app folder and unplug that external drive.. So there is no copy of Logic Pro on your system anywhere
Now go to the purchase tab in the App Store and you should see Logic Pro there for you to download and install again and this will be the 9.1.8 version...

Logic Pro X Problem please Help!

Hello, I have an iMac 2013 with maverick IOS X 10.9.1.I bought Logic Pro X and sound card Alesis IO2express.I ll try to open an Audio track and i see the Input 1 but when i press create i can't see anymore the input 1 where i have my mic.Its No Inputs on the new track.I dont know what to do, i think i tried everything.Pls if someone knows tell me! I bought the programm 179euros and the sound card 104 euros and i cant use them.I have the Rode NT2 mic.Pls HELP

nenikos1 wrote:
Hello, I have an iMac 2013 with maverick IOS X 10.9.1.I bought Logic Pro X and sound card Alesis IO2express.I ll try to open an Audio track and i see the Input 1 but when i press create i can't see anymore the input 1 where i have my mic.Its No Inputs on the new track.I dont know what to do, i think i tried everything.Pls if someone knows tell me! I bought the programm 179euros and the sound card 104 euros and i cant use them.I have the Rode NT2 mic.Pls HELP
A known problem with the latest Apple updates.
It's all over this forum, take a look around.

ITunes Downloading Issue PLEASE HELP ME!!!

Hello, every time I install iTunes 6.0 the installation doesn't work. Everything goes well until after it says "Configuring Windows Installer" the screen goes back to the desk top. However, the iTunes installer is still running. PLEASE HELP!

Tom, did you try any of these threads?
http://discussions.apple.com/search.jspa?threadID=&q=%22error+-48%22&objID=c149& dateRange=last90days&userID=&numResults=15&rankBy=10001

Linksys WRT160N Online Downloading issues Please help!!

Ok guys im a newbie to this Networking way of life.
Your help is greatly needed and appreciated here is my problem.
Equipment= Comcast motorola modem/Linksys WRT160N Wireless router/Linksys WGA600N wireless gaming adapter
The issue here is i do alot of online gaming through my Xbox 360 console i can host a variety of matches online and for hours and hours at a time no lag what so ever but as you know on the Xbox360 dashboard they incorporate a wide range of downloaded content whether it be for your game library or media when I click on content to download no matter the size of the file the speed is terrible it takes about 5-10mins to get from 1% to 3% and just sits there for even a longer period of time as it is at this rate I will have to wait anywhere from 1-2hrs to download a demo or a video or netflix movie. I've contacted tech supp on this and trouble shooted different scenarios I have also port forwarded the ports and I'm still having this issue.
The Wireless router is located 15feet away from the gaming adapter FYI
Please advise!!!!

This may be a little old, but I have a WGA600N and a WRT610N.. I've had much the same problems but here is what I've discovered that may help.
The WGA600N in the initial setup connected to your computer doesnt have a means of specifying exactly how you want to connect to your wireless (no channel, band, etc). What ends up happening is that you set your wireless on your router to be "mixed" and the adapter will constantly switch channels.
I went so far as to specify on my 5ghz band on the router that it be "N-Only" and the adapter still gave sluggish performance.
On a whim, after reading some advice I re-setup my adapter and gave it a static IP address outside of the range of my DHCP settings. This still gave me no better performance.
Then, I decided to try hitting the static IP of the adapter in my browser, and voila! I can access all the advanced settings of the adapter that you couldn't during the initial setup connected to the computer. My adapter is using the 1.00 release and I'm able to finally tell the adapter to use "N-Only" as it defaults to "Mixed" mode and will channel surf on you dropping connections.
Having played with both my WGA600N and WRT610N, I can hope for a better firmware release soon but hopefully these tips help you set up your adapter and router a bit better.
Good luck!
- Rob

Logic 8- Midi issues-Please help an amateur!

Hi,
I have trawled the Logic 8 manual but my head is melted reading it. Basically I have two queries. I’m a total amateur, as you will soon see from the questions I’m about to ask, with a project due so the pressure is on.
Can I put a fade in/fade out on a midi region? There are a number of different instruments playing simultaneously and I want them to all fade out together naturally enough. I think it’s something to do with Hyperdraw maybe or Automation?
Also, how can I put say a bit of reverb on one midi region? For example I have a lot of virtual piano on my music but in some sections I want to give it a different feel. Can I put the reverb on just one segment without having to apply it the whole way through the region and if for example there are 4 or 5 instruments playing together can you put reverb just on one instrument? I probably need a crash course in mixing but help greatly appreciated.
Thanks

The first thing to realise, is MIDI is not sound. MIDI is just a series of instructions "Ok, play me a C3 quite hard now", and it's the instrument itself that resonds to these instructions and makes a sound.
Can I put a fade in/fade out on a midi region?
Yes, if you want to do this via MIDI (ie, put in a MIDI instruction that says to the instrument "Ok, please reduce your volume", you need to use a MIDI Volume message.
The easiest is probably to select your region, enable Hyperdraw on Volume, and draw in your fade where you want it.
I think it’s something to do with Hyperdraw maybe or Automation?
Automation is a way of automating the mixer. You so far haven't said what instrument is making your sound - a MIDI region could be playing back an external keyboard, or it could be playing back a software instrument inside Logic. If the former, you can't directly use automation. If the latter, you can, as the "sound" is already inside Logic.
Also, how can I put say a bit of reverb on one midi region?
Again, thinking about it logically - you can't put reverb on some instructions, that doesn't make sense. You have to put reverb, which is an audio process, on the instrument playing the notes. Assuming you are using a piano sound inside Logic, then you can insert a reverb plugin on that audio channel the sound is coming through.
(I'm trying to keep this fairly simplistic.)
For example I have a lot of virtual piano on my music but in some sections I want to give it a different feel. Can I put the reverb on just one segment without having to apply it the whole way through the region
Remember, we are adding reverb to the "instrument", not the region containing instructions. Yes, there are many ways to achieve what you want, but some of these would take a little time to explain and I'm not sure you'd follow me. (I don't mean to sound patronising, BTW!)
Typically, though this is not the only way, you'd put a reverb on a spare aux channel, and "feed" in the piano sound to this reverb. You can then automate this "feed" (called a bus send) so you can increase and decrease it throughout the song, to give you the desired increase or decrease in reverb.
Are you comfortable using Logic's mixer, inserting plugins, sending audio through busses etc?
if for example there are 4 or 5 instruments playing together can you put reverb just on one instrument?
Yes - again, if you have the reverb directly on the one instrument channel, the other instrument channels don't have it on, and so will have no reverb. Or using the bus send method above, you send only the piano to the reverb, and nothing else, so only the piano has reverb.
I probably need a crash course in mixing but help greatly appreciated.
Yes, I really recommend getting some introductory MacProVideo.com Logic tutorials, or get a friend who knows Logic to walk you through some basics - it concerns me that you are working on a real project under pressure, and have very little knowledge of the basics. I mean, I admire you jumping in at the deep end, but it doesn't help if you drown on the first go...!

ITunes download issues - Please help!!

I have paid and tried to download a film but iTunes repeatedly keeps saying there is an error and stops downloading it half way through. The film appears in my iTune on the computer but stops at th 40 minute mark. Any suggestions to download the rest or get my money back?

Hey Davidl678,
Thanks for the question. It sounds like you are unable to download the purchases from your purchase history, because iTunes believes the songs to be in your library. It may be necessary to delete the items from your library, then re-download from your purchase history. Before doing so, you may want to take note of which song are available for re-download:
iTunes 11 for Windows: Delete songs, playlists, or other items
http://support.apple.com/kb/PH12359
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Thanks,
Matt M.

I try to download abode acrobat xi pro from abode download asssistant,it shows download is completed.but iam not able to get thet downloaded file,please help me

i try to download abode acrobat xi pro from abode download asssistant,it shows download is completed.but iam not able to get thet downloaded file,please help me

oatgeo wrote:
I checked the proxy and it should be OK. That's mean I have to try and try again until I get it from the slow servers.
Yes.

Mid 2010 15" MBP i5 A1286 POWER ISSUE-PLEASE HELP-

The MBP works fine when mains connected but the only issue is every time I take the charger out it shuts down on me!!! So I have checked with a multitester & looks good the only thing i find hard to check for power is the battery itself as its hard to get a good connection, also I took to local Apple store & they checked with a new battery but said its still same issue so the guy disconnected nearly all the connecters off to check if they causing issue & he said now the battery is charging.
So they still have the laptop to do further tests etc, but I’m not sure what could be the problem hear as maybe there is some component which is bad so the battery’s not charging or what else could be the issue please help & advice as I’m really confused as if it was something to do with the logic board then surely it would not even charge even after checking with the multitester or like Apple genius done by disconnecting other components...
ANY HELP OR ADVICE WOULD BE HELPFULL,
THANKS GUYS

THANKS FOR THE HELP GUYS!!! BEEN AROUND 5 DAYS & NOT ONE PERON HAS HELPED...
BUT YEAH THANKS AGAIN...
WASTE OF TIME THIS IS...

HT5642 Unable to download app this time error while downloading app please help!!!

when i download some app from apps store i get the following error
"Unable to download app this time error while downloading app" please help!!!
i ve tried these Things but
didnt workout yet
1) i tried hard reset
2)i tried logout/login Itune & appstore
3)Connected to pc and rest setting Network and Full Rest
all of no use... i dont want to update my softwre from IOS 6.0
Plx help!1

Hey Prahaladvatsan,
Thanks for the question. If I understand correctly, there is a blank app icon on the home screen. It looks like you have already done some troubleshooting. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

Trackpad Issue - Please Help!

Hi there,
Hope you can help me out here.
I've recently purchased a 15" i7 Macbook pro. The machine is but 3 weeks old &, of course, very well looked after.
A few days ago, the built-in trackpad started behaving eratically. Cursor moving by itself, not responding to touch, clicking and opening things involuntarily. Not good at all. Many users seem to have had this exact same issue.
These problems seemed to miraculously stop after a few re-boots and possibly a software update? I really couldn't tell you what resolved the problem.
Unfortunately I now have a totally different problem.
There is a thin, possibly 8 to 10mm horizontal strip across the centre of the trackpad that no longer responds to touch. If I move my finger from the botom of the trackpad upwards (or vice versa), the cursor will stop momentarily as it passes over the horizontal strip. The buttons are fine and the rest of the trackpad is fine. For the moment, I've increased the cursor acceleration so that I can at least navigate round the screen with a smaller area of the trackpad. USB magic mouse seems to work fine.
If anyone else has experienced this &/or found a solution for this issue, please help me out here. I have rifled through endless threads about MBP trackpad issues with little success & do not live close to an apple store/genius bar.
This is a 3 week old machine that cost me a small fortune. To be getting software/hardware issues so early on in it's lifespan is really rather worrying for the future.
Appreciate your help here.
J

I'm not sure what caused this, but I extended my lunch break and drove the machine down to the Westfield apple store. I didn't have an appointment with the Genius Bar but I managed to persuade one of the staff to speak to a technician in the workshop. She came back into the store and told me that they had replacement trackpads and that , considering the machine was only 3 weeks old, the technicians kindly sandwiched the repair into their timetable at zero cost. 2 Hours later, I now have a perfectly functioning trackpad/machine.
I can't thank them enough.
My only gripe is that I couldn't speak to a technician to find out what the problem was, how they resolved it or what causes these issues for future reference. Understanding why these problems occur often helps to build your own framework of understanding. Most of the threads i've read about trackpad issues are largely unresolved with people only speculating the problem/solution.
The initial issue I had with the trackpad's erratic behaviour seemed to be a well known problem that many are associating with a trackpad firmware update. Unless by pure coincidence I had an immediate & major hardware fault after it, which is unlikely, my personal guess is that the two issues were related.

Cannot open .pdfs. Updates downloaded. Please help

"There was an error opening this document. The file is damaged and could not be repaired."
This is the error message I have been getting for the last three weeks or so. Cannot open .pdfs on MacBook Pro. No changes have been made to computer. Please offer suggestions. Adobe Reader updates have been downloaded. Please help! Thanks.

If Reader and Preview can't open them, they are most likely damaged.

How i can install my plugin in Logic X?! please help meeee :( i can't install all plugin in logic

How i can install my plugins in Logic X?! please help meeee i can't install all plugins in logic....Logic is original

4GB of RAM
Display with 1280-by-768 resolution or higher
OS X v10.8.4 or later
Requires 64-bit Audio Units plug-ins
Minimum 5GB of disk space. 35GB of optional content available via in-app download.

Logic pro download issues PLEASE HELP!!!!!

Similar Messages

Maybe you are looking for