ChaRM - Message not appearing in CRM Web Client

Hi
My company is using ChaRM and have ZMCR setup for Change Requests. Due to audit reasons, the requester and approver in ZMCR cannot be the same person.
I have gone into SE91 and access message class SOCM_ACTION_LOG. Here, I have created my new message.
I have then gone into SPRO and setup all the necessary configuration.
And it works perfectly!!!! EXCEPT.....the error message doesn't show in CRM Web Client UI. So the functionality is working fine but obviously we need the message to appear so users no why the change request hasn't changed status.
Firstly, here is my config in SPRO:
And this is what's showing in CRM Web Client:
I have read online that function module CRM_MESSAGE_COLLECT is used to show messages in CRM Web Client. I am not an ABAPer. How does this function module work? What do I do with it? Or is there something else I need to do for this message to show?
Pretty sure my config is spot on so just need some advice on how to get the message to show.
Thanks very much!!!!!!!
Shaun

Hi Shaun,
Did you register your custom messages in the SPRO settings? You need to use Appl. Area SOCM_ACTION_LOG and make an entry in the below tanble for Single Messages;
Regards,
Vivek

Similar Messages

S_DEVELOP authorization needed for CRM Web Client in SAP CRM 7.0?

We implemented an own WebUI component in SAP CRM 2007 and use it in others components (with USAGE).
After we transport the component in SAP CRM 7.0 we always got an error CX_BSP_DLC_CONFIG_GENERAL_ERR at loading the component. But if we set the permission to SAP_ALL all thing work fine.
In SAP Note Nr. 1367944 we read:
"It is not possible to run the CRM Web Client without the S_DEVELOP, activity=03
authorization because it is needed by the Web Client Framework.
The S_DEVELOP authorizatin is part of the SAP_CRM_UIU_FRAMEWORK PFCG role, which must
be assigned to every user."
"This dependency has been removed in CRM 7.0."
Do we need to install some other SAP Notes at SAP CRM 7.0?
Many thanks for advices!
Handri Gunawan

Hi Handri,
I asked my collegue here, who created the note.
The note is correct, in CRM 7.0 you do not need S_DEVELOP anymomre.
The error that you have might occur because of another reason.
Could you track the call stack of this exception?
And send me back the call stack?
Regards,
Steve

Eclipse environment does not appear the options "Web Dynpro Project"

Hi all,
I installed the SAP NetWeaver 7.1 Composition Environment SP03
But in my eclipse environment does not appear the options "Web Dynpro Project" and not "Development Component Project".
That is, I can not do a Web Dynpro project
I have to do some more configuration in eclipse, for example, carry some plugin?
How to do this, please help me
Thanks,
Vivian

Hi,
         I think you are suffering from the problem below.
Problem Statement:
No Webdynpro Perspective is Visible
only perspectives available are
    Debug
    Resource(default)
    Team Synchronizing
How to Solve:
There are many ways that this kind of error can occur.
1.   It may occur due to "improper installation of NWDS"
How to Check and Resolve :    Is NWDS is displayed in intalled list in Control panel? If 'yes' then it is properly installed. If 'No' then reinstallation is needed.
2. It may occur due to "installation of Skeleton alone"
How to Check:
                                  you can check if your installation includes Web Dynpro by selecting
Help->Software Updates->Manage Configurations.
When installing Developer studio 7.1 you only get the bare eclipse installation (Skeleton). You have to add web dynpro and all, after the initial install is complete.
The installer installs the kernel of the Developer Studio. The kernel contains Eclipse and a few SAP additions, but is not equipped with the SAP features necessary for the Composition Environment. In order to install the required SAP features you have to install the SAP features.
           How to Resolve:
Updating the NWDS software will resolve the problem.
Go to Help->Software Updates->Find and Install. This will install the default SAP plugins that came with your NWDS CE 7.1 setup source and also the additional updates that are needed.

Siebel Charts gets generated but does not display in the Web client

Siebel Chart is getting generated in NetChart4.6\Server\root\projects\Siebel.chart folder. However does not display on the Web client
There is either no error displayed on the front end...
Also note that Charts is installed on Windows environment and Siebel Server is installed on Linux Server

Dear User,
Thanks for using Oracle communities.
Does this happens in dedicated client as well?
We would need to have traffic captured when you are actually executing actions. The tools like fiddler etc will help here to track the traffic.
I would suggest you open SR with MOS since it will need some analysis on network trace like fiddler. You can refer this thread in SR as well, so that once issue gets resolved thread will get updated with solution which will benefit others.
Best Regards,
Chetan

Why are some inbox messages not appearing in Mail on multiple macs and other devices?

My partner and I have an iMac at home and one at work. We also have two iPhones and two iPads. We only have a couple email accounts each and two for work set up on all six Mail applications. For some reason inbox messages are not appearing consistantly on all six devices. For example, I can have a new message from my Mom, see it at home and on my iPhone, but not on the iMac at work.
Also, some messages I'd like deleted off my work iMac since they're personal, but I'd like them kept on my home iMac and iPhone. Is this possible? Is it possible to delete a message on one and have it deleted on all others?
Message was edited by: witboy

What type of email accounts are they? IMAP or POP.
IMAP leaves messages on the server so you can get them from everywhere.
With POP, messages are downloaded to your client and then removed from the server, depending on your settings.
The iDevice setup for POP doesn't remove them from the server.
I think Mail's default setup for POP is to remove immediately.
If they are POP accounts, you can set Mail's preferences to leave messages on the server for a period of time so that you can retrieve them on multiple clients.

Multi value attributes not appearing in the Web UI

Hello,
I've created a multi value attribute in the SAP GUI in CRM 2007 which appears correctly against the product. When I transfer this multi value attribute to the web UI, it doesn't appear at all unless you add values against it in the SAP GUI, in which case it appears, but the set type attributes are not editable.
Any suggestions as to why the attribute is not appearing and what can be done to resolve this?
Thanks,
Alison

Hi,
I fear I did not completely get your point.
One thing I noticed some time ago while playing with the marketing attributes is this:
When you define an attribute that has multiple values, but no fixed values assigned, you are only able to maintain one value for this attribute. Maybe it is this what you are describing?
The WebClient only adds new lines in the table for the attribute, when a server roundtrip is triggered by selecting a value from the DDLB.
I do not know if SAP provided a fix for it in the meantime.
cheers Carsten

Icons in JAR file did not appear on runing web form

Hi
I am testing web application built using Forms6i with path 9. I configured the form server to run as a servlet and I put all the icons used in the application in JAR file I name it ICONS.JAR, I put this file in \FORMS60\JAVA\ directory.
I made the following configurations:
In Apache listner configuration file httpd.conf :
Alias /forms60java/ "D:\orant\forms60\java\/"
In forms confuguration file formsweb.cfg:
imageBase=CodeBase
archive=icons.jar
serverApp=Default
in registry.dat file:
default.icons.iconpath=
default.icons.iconextension=gif
In base HTML file:
<PARAM NAME="imageBase" VALUE="%imageBase%">
<PARAM NAME="serverApp" VALUE="%serverApp%">
<PARAM NAME="CODEBASE" VALUE="/forms60java/"
The forms are run with nao problem except that the icons do not appear. I see java console on the client machine, and I see that ICONS.JAR was downloaded and saved in jar cache.
In Apache access log file I see that there is an attempt to load the icons from the path <server_name>/forms60java/icon_name.gif but not from the archived JAR file.
What could be goes wrong or missing?

Hi Amin,
Maybe the icons.jar file doesn't contain the files (try opening it with WinZip or some other tool and verify the files are indeed there).
Maybe some case sensitivity issues are at play?
Or the GIF files are the wrong size so maybe you're only seeing the transparent upper left corner of alle the icons displayed on your iconic buttons or whatever.
Just a couple of wild shots (cause it doesn't appear you're having errors - but check all your log files including error_log)
Regards,
Jesper

Standard templates not viewed in ic web client.

Hi,
We have CRM 4.0. I created some standard tempate through t-code CRM_ERMS_MAILTEMPL. When I am logging in IC web client, I am not able to see my templates. This is the first time this functionality is being used at our side. I cannot see my template in the dropdown in IC web client. I need to click on More and then search and still I was not able to see any templates.
What could be the reason. I checked various settings but was not able to do it. In CRM 4.0 , I don;t know how ERMS is set up. Do we need to apply some note to have it worked. i checked CRM_ERMS_WF_CUST and link is also activated. Anyone who has done this setup in CRM 4.0 and ERMS kidnly let me know. I will really appreciate your help in this.

Hello,
You need to assign the mail form templates to a standard response group in the IMG (transaction CRMC_IC_RESPNGRPX) and then assign the standard response group profile to your Interaction Center WebClient profile (or CRM business role). That's probably the two steps you are missing.
Regards,
john

HR-CRM integration-Downloaded employee is not appearing in CRM

Hi Friends,
I am trying to download HR employee master data from ECC to CRM. I have maintained all settings required for data flow.
When I try to download few employee records manually using PFAL transaction (RHALEINI) system shows successful transfer of IDOC with Gree light message.
In CRM, when I check BD87, it is showing " Application Document Posted' with IDOC status 53.
But i could not see the downloaded employee in BP transaction.
System giving message the it has downloaded successully, but it is not showing in CRM systm.
I request your expertise in the issue to help me.
Your valuable suggestions will be greately appreciated.
Best regards
Sravanthi.
Edited by: Sravanthi_Revella on May 3, 2009 7:13 PM

Hi,
I have maintained same values in both ECC and CRM system for SA13, title and marital status.
Now the problem is in PFAL transaction showing succesful transfer of IDOC, and in CRM BD87 transaction system is showing that "Application Document has posted" with IDOC status 53.
But when I do a search for downloaded employees, nothing is available in CRM system.
I did all required settings, but I could not make out the problem.
please help me to solve this problem. Your help will be greately appreciated.
Best regards
Sravanthi.

Photo album does not appear on the web but does in a published folder

**** everyone,
My problem is the following: I started to create little webpage with iweb. At the moment it just consist of a photo gallery, one blog entry and one video. To test it I published itto a folder on my hardisk and the website worked perfectly. So I uploaded it to my server (I have no .mac account). When opening the site over the internet the start page looks perfect, as well as the video page but on the album page the album doeas not appear!!!
The URL is: www.voyage64.com just click on "Photoalben" (it´s a german page) and there is just nothing, There should be an album which also appears in the page published to a folder on my harddrive.
Another thing that does not work is the blog. When you enter "blog" you will see the list with one entry listed, that works fine on the web but if you click on that entry it tells you that the file was not found on the server but it is there, this also works on the published folder on my hardrive. The confusing thing is: I´ve another website on my server with a blog with more entries that just works fine.
Maybe it´s something with the RSS because I tested other stuff and whenever the RSS logo is visible in the adressfield in the browser something does not work. I actually don´t need any of that RSS stuff but there is no way to disable that.
Maybe it´s a fault with my server but I´m not a specialist in stuff like that.
So thanks in advance for your replies,
kind regards,
David

I followed the topic concerning the Firefox photoalbum problem but I´m using Safari and the albums will not show up on the web !!!! I also exchanged the detailview and headercontrol *js which worked fine for opening the photoalbum on my harddisk with firefox. But when its uploaded to the server it won´t display and that in Safari!!!! On the published folder on my harddisk everything works fine
www.voyage64.com
just cklick on "photoalben" no album apears. Does anyone have the same problem with safari ???
regards,
David

ERMS work items not visible in IC Web Client Agent Inbox

We have configured ERMS rule modeler with a routing to an organisation unit if email content contains a specific word.
ERMS seems to work fine as workflow is triggered and work items created in the relevant user SAP inbox (any user assigned to the organisation unit used in ERMS routing.
When I log into the IC Web client and check for email items in the Agent Inbox, the emails are not visible!!!
Has anybody faced a similar issue?

Hi Manoj,
Have you look at this configuration in SPRO
->Agent Inbox ->Setting for Asynchronous Inbound Processing -><b>Define Receving Emails/Fax settings</b> inthis Set Comm.method as <b>INT</b> i.e E-Mail.
Pls check this config and get back me..
Regards
Raju

Error code message not appearing

Hi,
I tried to create a set of labview error codes codes using tools-> edit error codes. A created a few test errors and saved the file in
C:\Program Files\National Instruments\LabVIEW 2009\user.lib\errors
The file called test-errors.txt appears as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<nidocument>
<nicomment>
First error code file Sean
</nicomment>
<nierror code="5000">
Device unstable
</nierror>
<nierror code="5001">
Device Critically Unstable
</nierror>
<nierror code="5002">
Press Stop or device will begin countdown to destruction
</nierror>
<nierror code="5003">
Destruction Countdown Commenced, all organic life will be destroyed with a 2 mile radius in t - 10 minutes
</nierror>
</nidocument>
I then designed a simple VI to test the error codes, see the attachment. However the error message do not appear in the error out source box.
Does anyone know why LabVIEW is not recognising my error codes?
Rgds,
Sean
Solved!
Go to Solution.
Attachments:
test.vi ‏12 KB

Hi Sean,
OK - i took another look at your test VI and probing on the error out wire shows the description, but you are right it is not shown in the control. I have attached a VI that should solve the problem (I have tested it and i works ok)
All I have done is to use the general error handler, which returns the error code and description, write the description to the error cluster and set the general error handler to 'no dialogue' so that the message is not displayed.
Like i say, it works but if there is a better solution let me know!
David
David
www.controlsoftwaresolutions.com
Attachments:
Error cluster from error code (with description).vi ‏13 KB

Image not appearing in the Web Parameter Form

Hello Folks,
I have image in the Parameter form, which is not showing up in the Web Parameter Form. I had set up the "REPORTS_PATH" also and still not appearing.
Any clue greatly appreciated..
Thanks,
Senthil

I ran into this problem as well, and there is a work around if you do not want to apply the patch. Put the image in your <oracle_home>/apache/apache/htdocs directory. Then in your report in the parameter section, create a text box. Put this in the text box:
<img src="http://<your_servername>.<your_domain>:<your_port>/<your_gif>">
Go into the parameters of the text box you just created(hit F4) and choose YES for Contains HTML. Then when you run the paramter form on your web server the image will be displayed.
Martin

Tax Conditions types not appearing in CRM orders and quotations

Hello All,
I have created a new tax condition type in ECC and through initial load replicate the same to CRM. pricing procedure repliction with new tax condition is also successful.
But, the new tax condition is not appearing in condition tab at item level when i create quotation in CRM. other condition types are coming. data for this condition type is there in custom condition table. mapping of tax classifiction to tax group is also done in SPRO.
Please advise.
THank and Regards
Sudhir Grover

Hello Sudhir,
You should check the trace log for pricing at first. Set the user parameter:PRC_TRACE as 'X' on T-cd:SU01 for your user and check the Access analysis on the condition tab.
Regards,
Masayuki

Raised Messages Not Appearing In ByDesign

Hello everyone,
Simple question --- I have a message on a custom BO I want to appear in ByDesign should a script successfully run. The message appears with the correct values in the debugger if I have it open, but nothing comes up along the bottom of the screen in ByDesign, whether the debugger's open or not.
I was under the impression that all I had to do was write:
raise MessageName.Create("S", <parameter list>);
And it would appear, but apparently not. The screen in question is the file input screen: I want a message to appear should the file input successfully trigger and run an AfterModify script to completion. Any ideas? Thanks!
Lewis

Hi Frederick,
In order to be able to display synchronous messages in SXI_MONITOR you have to set the following
parameter in SXMB_ADM.
Go to SXMB_ADM --> Integration Engine Configuration. Click on 'specific Configuration'.
Add the following parameter:
Category: RUNTIME
Parameter: LOGGING_SYNC
Value: 1.
Hope this helps you.
Carlos

ChaRM - Message not appearing in CRM Web Client

Similar Messages

Maybe you are looking for