Logic Pro no longer works with Firewire 1814 after updating drivers

I was attempting to hook up 2 M-Audio Firewire 1814 units and use them from Logic Pro 7. The older driver I was using would actually crash with this configuration, and so I updated to the latest driver, thinking this might solve the problem.
Well, the M-Audio driver now comes up fine - I can even monitor the signal levels coming from both devices in the associated UI. However, when I launch Logic Pro, I get the following message:
"Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers."
Although I can arm some of the lower track numbers (I still get this message), I cannot do so with higher track numbers.
Effectively, installing the latest M-Audio driver has broken my version of Logic Pro for whatever reason.
Removing and reinstalling the driver made no difference.
Any thoughts, anyone??
-- Brian
PowerMac Dual 2.5 GHz Mac OS X (10.4.8)

The M-Audio driver does not support 2 devices in Logic Pro.

Similar Messages

IHome no longer works with iPhone 4s after iOS 6.1 update.

My iHome no longer works with iPhone 4s after iOS 6.1 update. Prompts message 'This accessory is not supported by iPhone'. Has anyone come accross this and is there a fix?

Ring up iHome and ask them for a fix... And if they cant supply you with a fix... Then you should be entitled to a replacement or a upgrade, as firmware upgrades on your ios device should not affect audio products......

Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work. Does anyone have a remedy for this?

Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

My iMessage no longer works with the new is07 update how do I fix this

My iMessage and some of my applications no longer work with the new software update. How do I fix this?

I called Apple Support after trying many fixes suggested online. They directed me to the procedure on the following page:
http://support.apple.com/kb/TS4268?viewlocale=en_US
I did the erase and restore option they suggested since I had tried a pile of ther things suggested on posts and blogs and they did not work. I even waited the obligatory 24 hours, thus the restore from backup option was what they suggested. I have a 64gig iPhone 4S and it took about 1.5 hours to complete the entire operation seeing that I am using about 54 gigs of that capacity.
Warning: I lost all of my emails and all of the data files from one of my map programs so be sure you have everything that you really need from your phone store elsewhere before wiping your phone. I thought that the backup on my computer would restore everything but obviously NOT.
Hope this helps.

Does Logic Pro 9.0 work with Mac OS X Lion?

I don't want to update to Mac OS X Lion from Snow Leopard until I know 100% that Logic Pro 9.0.0 is compatible with it.
On a side note, would Final Cut Pro 7.0 work with Lion as well (I will not be upgrading to Final Cut Pro X)?
Thank you!

Okay peoples, I have great news!
I was told that maybe the update for Logic Pro 9.0.0 to 9.1.4 wasn't working for me because I must have renamed my software folder... and I remembered doing so back in 2010.
You see, my issue was:
I bought Logic Studio 8 (The big box with piano keys on the side) and then as soon as I did, Logic Pro 9 (the update version) came out. I was inclined to get the latest software, so I upgraded immediately. I remember wondering why my logic pro 8 stayed behind after the update so I foolishly renamed the folders "Logic Pro 8" and "Logic Pro 9" haha. Not knowing this would cause me grief later when I tried to update.
So, my Logic Pro 9 is working again fine. My only concern now is for the hardware (the Apogee Duet) I am using, as I have to wait for a Lion update in August, thankfully it is only a month away as apposed to 6
Cheers,
and I hope this helps.
Tuck

Are there any Updates for Logic Pro 9 to work with Yosemite?

I updated my iMac to the OS X Yosemite 10.10 and my M-Audio Fast Track board does not work with my Logic Pro 9.
Is there a way or Updates available to make them work together? I work with music and I am LOSING TIME AND MONEY on this...
Thanks for ANY help

It's not Logic 9 that's the problem, if the M-Audio device is not compatible with Yosemite Core Audio (which I don't believe it is) no version of Logic will be able to use it. Before any upgrade of main applications or operating system one needs to check and see if all related hardware is supported. Hopefully you have a backup of your last working configuration.

La Cie Porsche Design External Hard Drive no longer working with Time Machine since update to Yosemite.

My La Cie Porsche Design External Hard Drive USB 3.0 is no longer working with Time Machine. Is Yosemite the cause? How do I fix?

Can you see the drive in Disk Utility? If so, try selecting it and using the Mount button in the top menu. You can also run repair disk and repair permissions.

Final Cut Pro / Logic Pro Don't Work with MacBook Pro

I think it's pretty bad public relations that Apple would knowingly sell a new product that does not work with Logic 7.1 or Final Cut Studio, and not bother to tell you.
We found out the hard way when after a post-production editor spent 3 hours trying to reinstall the discs and called an Apple Support center. They informed us that because of Intel Chips we needed to replace our software completely and pay Apple a fee of $50 per title for this benefit.
I can live with spending $100 for software which is less than 1 year old (although I think Apple will be sued over this one if not their pathetic support of iPod batteries) but why is so hard for Apple Computers as a company to advise customers when software doesn't work?
For Apple to call this product a "Pro" product and support it with such pathetic disdain for the client and to not advise their so-called 'geniuses' of this (dare I use the word) "glitch" is really hilarious.
To 'fix' this problem, go to
http://www.apple.com/universal/crossgrade/
G5 1.8GHz / G4 17" 1.67GHz / MB Pro 2.16GHz +2GRAM Mac OS X (10.4.7)

I don't know what's worse, the fact that some of the replies here are completely immature and stupid, or the fact that some of you have hundreds of posts meaning that you don't seem to do anything else all day except stare at the Apple website and look for things to pick at.
I have a right as a consumer to complain, and no, this doesn't equate to buying beachfront property or the number of children I have relative to rooms in my house, it equates to whether or not Apple, as a company, feels it is important to notify customers in a meaningful way of changes within their product offerings.
I'm happy you all seem to have nothing else to do all day except stare at the Apple website, I personally would rather stare at that beachfront property in Big Sur.

Does Logic Pro X actually work with the Roland VS-20?

Hi all. According to the support docs, the Roland VS-20 should work with Logic Pro X. I've installed the latest drivers, the latest Logic plug-in for the VS-20, and the latest VS-20 Editor. On occasion (and I have no idea what the magic formula is), I've gotten the controls and audio to work via the VS-20. However, more often than not, the VS-20 controls (transport controls and faders) do nothing, and playing audio results in a horrible screeching through the VS-20.
A couple of other points of info:
The VS-20 always shows up correctly in the Control Surface and audio settings of Logic Pro X.
The VS-20 works fine in Reaper 4 as well as when only using the VS-20 Editor.
I'm using Logic Pro X (10.0.3) on a 2012 MBPr w/ 2.6GHz i7 and 16GB RAM
Is anyone out there using this setup successfully?
Thanks!

Roland was very helpful, even though their solution didn't actually work for me. I sent them the same info as above, and here was the reply:
We are sorry to hear that you are having trouble. The VS-20 is definitely compatible with Logic Pro X. Be sure that you have setup the VS-20 in Logic Pro X according to the following instructions:
Audio I/O Setup:
1.     Select Logic Pro X in the menu bar and navigate to Preferences.
2.     Click on “Audio...”
3.     Under the Devices tab, set your Output Device and Input Device to “VS-20 44.1kHz”--if it is not already set.
Note: The sample rate of your Logic Pro X project must be 44.1kHz--as the VS-20 only operates in this sample rate.
4.     Click “Apply Changes”.
5.     Close the Preferences menu.
Control Surface Setup:
1.     Select Logic Pro in the menu bar and navigate to Preferences.
2.     Navigate to Control Surfaces and then click on “Setup...” A Setup window will appear.
3.     Click on “New” and then select “Install…” An Install window will appear.
4.     Select “Mackie Designs (Manufacturer) / Mackie Control (Model) / Logic Control (Module) and then click “Add”.
Note: If prompted with the message “No new Devices found”, click on “Add Manually”.
5.     In the Setup window, expand the Mackie Control section and assign both the Out Port and Input Port to “CONTROL”.
Note: If the Setup window does not appear, right-click on the Mackie mixer image and then select “Hide/Show Inspector”.
6.     Close the Control Surface Install and Setup windows.
The VS-20 is now setup for Logic Pro X.
We hope this information is helpful! Please let us know if this does not resolve your issue and include as much information as possible regarding troubleshooting you have done and results you have received. We are happy to help you.
Sincerely,
Roland Product Support
These steps actually resulted in a situation where some of the buttons on the VS-20 triggered sounds instead of their intended functions. I deleted everything and started over, this time picking the actual VS-20 option in the setup, and everything worked.
I should mention that I also (foolishly?) updated to Mavericks just before getting this to work.

Logic Pro 8 *can* work with 10.7 - some testing required!

This is just a separating out of a post I made in another thread try it out - see what works - and what doesn't!
"For those with Logic Pro 8 and 10.7 obviously,
Just humour me and go to your Applications folder.
Find your Logic Pro app and ctrl click (or right click on it)
Then click 'show package contents'
Then in the resulting folder, double click on 'contents'
Then double click on 'Mac OS'
Finally double click on the file named 'Logic Pro'....
What happens for you next??"
-Rob

I've tried this (Mainstage) on both my home and mobile setups and there is one anomaly....
If I try to open a saved concert from the 'open recent concerts' menu item, nothing happens - However if I open a saved concert from the normal 'open' menu item, it all works as it should. Apart from that everything else 'just works'.
Obviously there is a variance between my findings and worshipvertical's, which is why I urge everyone to test for themselves to see what works and what does not.
If it works, great! You've saved a pot of money - If it does not work, I'm not sure I'd retain that much in the way of loyalty to the Logic platform, especially in view of the shorter and shorter enforced obsolescence periods that are now being forced upon us. Who knows where Apple is going next?
My opinions and findings, nothing more - or less
-Rob

IPhoto no longer works with Nikon 5100 after upgrade to 10.8

IPhoto with newly installed Mountain Lion no longer recognizes a connection to my Nikon 5100. The USB cable is good, as it works with my other Macs -- OSX versions 10.6.8 and 10.7.4, just as it did with my Imac before I upgraded to 10.8. My Preferences are set to recognize any camera. I even upgraded to IPhoto 11 v9.3.2, but no help. Any ideas?

Hi, I have the same problem with my Nikon Coolpix 5000: camera is not recognized at all by Mountain Lion after upgrading: worked just fine with Lion.
Problem: I connect the camera, Mac (MacBook Pro Late 2011) freezes for a while (!!!) then external disk icon does not appear.
Console registers messages like the following:
20/08/12 19:34:24,000 kernel[0]: USBF: 363761.547 AppleUSBEHCI[0xffffff801fcbf000]::Found a transaction which hasn't moved in 5 seconds on bus 0xfa, timing out! (Addr: 0, EP: 0)
Strange thing is, my Coolpix 5000 is a very old camera with only USB 1 support: this problem occurs to me with every USB 1 device connected on Mountain Lion!
Hope they'll fix the problem or just find some workaround...

IPod Touch no longer works with car stereo after 4.0 update

I updated my iPod to 4.0 a couple of days ago, and my Hyundai Santa Fe's built-in iPod interface no longer recognizes my iPod's music - it just says "empty iPod" or something of that nature. Is anyone else having this problem?? What should I do?

Add me to the list. Brand blankety-new ipod touch that after 4.0.2 wouldn't work with the Subaru-factory-installed ipod connector in my '08 STI. The shut-it-off-and-restart-in-the-car method at least made it able to play music again but still no recharging.
To add insult to injury I did the have-an-Apple-GENIUS call me thing. The first thing was that they called me....for about 1/4 of a second. The phone blipped for less than a ring and then I got an email saying, "Oh, we TRIED to reach you and you weren't there. Why don't you call us?". So I called and was immediately put on hold. When one of the geniuses finally picked up, I described the issue with great patience and his insightful answer was, "let me put you on hold while I talk to my supervisor." So I sat on hold for five minutes until...they just hung up...no answer, no, "gee we think you're SOL"....just "click". Thanks a boatload Mr. Jobs.

Aperture no longer works with new osx Yosemite update

I installed new OSX Yosemite update and now it says that my Aperture App. will not work with this version. What can be done other than updating Aperture?

Hi,
It's a five step process
Call Apple Support for Software > Aperture
Answer questions at recorded message (have Aperture serial number ready – it is on a sticker on the back of the 'Installing Your Software' booklet) and you will be transferred to a real person.
Inform them of the issue and they will tell you that this is a known issue with certain users and they will request a 'Redemption Code' for the App Store for a standalone download of Aperture. The issue will be rectified in the next Yosemite release.
Wait for email from Support (they have to contact Support in California for redemption code, so depending on your time zone, there may be some delay).
Visit App Store, enter redemption code, and you are good to go.
Hope this helps.

Import via Drag & Drop not working with LR CC (after Update from 5.7)

I always imported my pictures by just dragging them in the Windows Explorer and dropping them to the Lightroom Gallery tab.
This does not work with LR CC anymore.
The longer way via "Import" works fine.
Any suggestions?

With Gallery i meant Library, my mistake (wrong translation, i am using the german version).
What works with your setup doesn't work with mine.
I attached a screenshot:
As you can see (cursor) i can't import the file from the file explorer on the right.
(The file is not already in the catalogue and i am in the library tab grid view mode).
Using Windows 7 x64 prof Service Pack 1

Apple tv 2 dont work with thomson tv after update??

After an update my apple tv don work with my Thomson tv anymore, when i choose the HDMI on my tv, the led light goes out on the Apple tv , and the tv say no signal , i have 2 thomson tv and both are doing the same thing, om my philips tv the apple tv works???!!!
Patrik

I assume it's a straight HDMI connection. Have you tried connecting to iTunes (via micro usb) and doing a restore? If that doesn't work it may be hardware related, in which case you should take the unit in.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

Logic Pro no longer works with Firewire 1814 after updating drivers

Similar Messages

Maybe you are looking for