Logic X templates missing

Hey all,
Bit of a problem here. When I start up my Logic and want to choose a template, I only seem to have access to a limited amount of templates, which are Hip Hop, Electronic, Songwriter and Multi-Track.
I'd very much like to have access to the "Produce" section of templates which include temps such as Music for Picture, Stereo Mastering, Surround Mastering etc.
I checked my system files, and all the templates are definitely there.
I used to have access to all the templates but I no longer do. I've provided a picture of what I see on my screen.
Any help would be greatly appreciated.

I would *guess* that reinstalling Logic would not erase the additional content. But that's just a guess. This link might help with that question: https://discussions.apple.com/message/22819179#22819179
Seems like some of your templates are somehow corrupted. It sounds like they are in your filesystem (I don't have it in front of me, but /Library/Application Support/Logic/Project Templates/ or something like that), but then they don't show up in Logic, and don't open correctly when opening from the filesystem.
How about this: Create a new user on your Mac. Open Logic there. Same problem? If not, try deleting some caches in your original user account (~/Library/Caches/com.apple.logic.x/ or something like that, and com.apple.audiounits.cache).
If the problem exists even on a new user ... this is a lame answer, but it might be just lame enough to work. It couldn't hurt to trash your preferences, repair disk permissions, and restart.

Similar Messages

  • Moved: Creation of new iViews not possible because templates missing

    Hello,
    sorry I moved this issue to "Portal Content Development"
    Creation of new iViews not possible because templates missing
    Regards
    Alex
    Message was edited by:
            Alexander Lepka

    Alex,
    I'd be curious to know what SAP says.  We have the same problem.  Not sure how/if we broke it, but we can no longer create iviews using the wizard.  I opened an OSS msg a while ago, but did not get much assistance. 
    We have recently upgraded to 2004s and it did not resolve the issue as I hoped it would. 
    If SAP provides a solution for you, please post it. 
    Thanks,
    Shelly

  • Outlook Integration - Snapshot templates missing when upgrade to 8.8 PL14

    hello all,
    We have a problem when upgrade from B1 8.8 PL10 to PL14, the snapshot template missing. We had no problems to generate snapshots in B1 8.8 PL10.
    All the snapshot templates has been installed on <Servername>\B1_SHR\AddOn\Microsoft Outlook Integration\Templates\Default
    And in the -GoTo meny- and select -create default templates- could not be started.
    Grateful for all help.

    Hi Jorg,
    I quote a solution for similar case but the solution is based on client PC :
    OI: Failed to create snapshot template in client machine
    Symptom
    You start up Outlook integration Addon in client machine. When you want to create a snapshot template, you get an error that can not create it.
    Other terms
    SAP Business One, Add-on, Outlook integration, OI, snapshot template, Index, Host, U_Host, BOOSTP , failed to create
    Reason and Prerequisites
    The index on user defined table [@BOOSTP] is not right. It does not include column U_Host.
    Solution
    You can run below script to fix it,
    IF EXISTS (SELECT 1 FROM CUFD
    WHERE AliasID = 'Host'
    and TableID = '@BOOSTP')
    BEGIN
    IF EXISTS (SELECT name FROM sys.indexes
    WHERE name = N'@BOOSTPBOOSTPI1')
    DROP INDEX [@BOOSTP].[@BOOSTPBOOSTPI1]
    IF EXISTS (SELECT name FROM sys.indexes
    WHERE name = N'BOOSTPI1')
    DROP INDEX [@BOOSTP].[BOOSTPI1]
    ALTER TABLE [@BOOSTP] ALTER Column U_Host nvarchar(200)
    CREATE INDEX BOOSTPI1
    ON [@BOOSTP](U_TplName, U_Language, U_CatID, U_Host)
    IF NOT EXISTS (SELECT 1 FROM UKD1
    WHERE tableName = N'@BOOSTP' and SubKeyId = 3)
    Insert into UKD1 values('@BOOSTP',0,3,'Host')
    END
    ELSE
    Print 'There is no U_Host column in @BOOSTP table!'
    if the above solution can't solve it, log a message to SAP support.
    JimM

  • 'save site as template' missing SP2013

    Hello!
    I would like to save my webpart page as a template. The problem is that i don't see "save site as template" anywhere on this site. On another site i've created the "save site as template" is visible.
    What could be the problem? I think i activated the necessary features. 
    Thanks. 

    Hi,
    Open the site in SharePoint Designer, in the home page, Click on “Site Options”, you will get prompt, In the “Parameters”
     Tab, you can find “SaveSiteAsTempalteEnabled”, set it to true.
    For more information, see
    http://microsoftechies.wordpress.com/2013/01/08/sharepoint-2013-save-site-as-template-missing/
    Best Regards.
    Kelly Chen
    TechNet Community Support

  • Depoyed com.businessobjects.pct.masteriview.par but iview template missing

    Hi
    I have successfully deployed the com.businessobjects.pct.masteriview.par in Portal
    I had taken the PAR file from the installation KIT folder of SAP Integration KIT
    I have ONLY deployed the PAR and deployment was successful
    I am using SAP EP 7.0 SP21
    After the deployment I can not see the BusinessObjects Integration Kit -iView template in the iView creation template
    I have refresh the browser, logoff and login number of times, clear the browser cache and history also.
    Any suggestion what I need to do to get the BusinessObjects Integration Kit -iView template
    Regards
    Janak Mehta

    Hi,
    Do check the below forums for more details:
    Do not see BusinessObjects Enterprise Integration Kit - iView template
    IView Template Missing
    Hope this may help you.
    -Noor.

  • How do I delete Templates?  I search for the templates with finder, in library, applications, logic, project templates. But, I can't find my templates there.

    How do I delet templates? I can`t find the templates with finder. I try in Libary, applications, Logic, Project templates. But, I can`t find my templates there. I find Logics templates, compose, explore and produce.

    pauloman80 wrote:
    User-created templates are located in username > Library > Application Support > Logic > Project Templates.
    Hi
    Note that in Lion OS, the User Library is hidden by default.
    Use the Finder:Go Menu (hold down Option to add the User Library to the menu).
    CCT

  • Templates missing

    Somehow all my WSS templates are GONE; this includes the Default and the "Fab 40" I had installed. Not sure when/what happened, been several weeks since I've accessed our site, which is just for intranet and not yet in production.
    If I run stsadm -o enumtemplates I get:
    "There are no items matching the criteria specified."
    When I go to Home->View All Site Content->Create this is what I see:
    http://i68.photobucket.com/albums/i33/Mamba357/Work/notemplates.jpg
    This is a WSS 3.0 (not upgrade) stand-alone install.
    AFAIK this was working okay last time I accessed the site, as I was creating a form (a list). I've tried rebooting the server, and Deactive/Activate the Team Collaboration Lists in the Site Settings->Site Features page.  ????
    TIA,
    M

    Regarding the create list issue,  I found the create list issue also may caused by the user permission for web application. I suggest you perform the steps below:
    1. Open Sharepoint 3.0 Central Administration
    2. Click application management > user permissions for web application
    3. select the problematic web application
    4. Under list permissions, check manage Lists.
    5. Click OK and test the issue.
    If the issue persists, please also confirm  whether other checkboxes are checked under user permissions and check them.
    Regarding the template missing issue, please answer the following questions. It’s important for us to narrow down the cause:
    1. Does the issue occur on different site collections?
    2. Does the issue occur on different webapplications?
    If the issue occurs on different webapplications, I suggest run the following command to re-config resource security on this server.
    PSCONFIG.EXE -cmd secureresources
    More information about PSCONFIG.EXE command :
    http://technet.microsoft.com/en-us/library/cc263093.aspx
    If the issue persists, please check uls log and post the related error.

  • Template missing

    Hi Experts, I am getting an error like(Template is missing : sap_sm_xls)  when I am trying to export to excel , Please advice how to resolve this.. Please find the attachment.. I already talk with my basis consultant..but they are saying it is not their issue! Thanks Abhay Manna.

    I just typed sap_sm.xls into google and the first hit was this;
    Excel Template Missing sap_sm.xls problem. Is it abap side or basis?
    But, I guess you (or your basis team) could have done that yourself.

  • TS5426 Logic Pro X templates missing

    I've installed additional orchestral content and the Orchestral and Music for Picture templates are still unavailable. Am I missing something?
    Custom templates also do not appear when I save them.
    Logic Pro X 10.0.7
    Mac OS X 10.9.4
    Macbook Pro Late 2011

    Is it supposed to be for 7 string guitar? You'll have to read this:
    http://help.apple.com/logicpro/mac/10/#lgcp204e230e
    and especially the chapter Determine the string assignment. It sometimes does react strangely (like not showing E6) I must admit. Start a new project in score mode and try to enter a scale from the lowest string up to the highest string. Now change midi channels, in the event editor, observing how this provokes different possibilities of identical notes on the fretboard.
    Have a nice day!

  • Why can't I colour code my tracks / instruments in a Logic Pro Template?

    Hi,
    I'm trying to create my own Logic template using an existing example template I found online.
    In this template, I want to be able to colour code all of my instruments / tracks so that each time I load my template, all the tracks will be set to specific colours (i.e. all kicks are dark blue, hats are light blue, synths are purple, bassline red, etc etc...)
    I've read that you can do this in the mini view menu (View > Configure Track Header > then tick 'Track Colour Bars') then you just select the desired colours for each track, and when you use this template again all these colours will be set.
    You can see the menu settings here ('Track Colour Bars' selected):
    I've done this with no problems on a completely new project (see image A below) but when trying to do it on this template I downloaded, the colours are not changing (see image B below)
    IMAGE A - Configure track header on a blank project
    IMAGE B - Configure track header on a existing project template
    Does anyone have any idea what might be overriding the colour settings on the template (IMAGE B)? As you can see, I have been able to colour the actual midi but it will  not colour the actual track.
    Any help would be greatly appreciated!

    I was having problems with this for a while. Logic Pro used to let you color they regions and the track at the same time. Now you have to color the track first then click, Option (Alt for PC keyboards) +Shift+C this changes the color of the regions on the track to the same color as the track. Hope this helps!

  • BusinessObjects Portal Integration - iView Template Missing

    Hello
    I have installed my BusinessObjects for Portal as follows:
    1. We already have BI 7.0 on SQL 2005 on BIDEMOSER SERVER.
    2. Installed BusinessObjects Enterprise 3.1 , Crystal Reports 2008, SAP GUI 7.1 and SAP Integration Kit on this new server name : BODEMOSER.
    3. We already have EP 7.0 on Oracle 10.2 on EPDEMOSER SERVER.
    I have installed the BOE 3.1 and Integrated with the BI Server and imported the roles and all the functions are working fine between BO and BI.For Portal Integration i have transferred the masterview file from BODEMO SERVER com.businessobjects.pct.masteriview.par to the EPDEMOSER SERVER.
    And it was uploaded in the EPDEMOSER SERVER System Administration--> Support --> uploaded successfully.And I have followed the SSO configuration as per te guide. And values in the Web.xml files are properly as per the guide.
    After the uploading the masterview par file i could not able to view the iView template in the System.I have cleaned the cookes and all temp files.
    As per the guide I have created an folde name BI_BO and SYstem name as BI_BO_DEMO.Now when I started creating a iView Template by right clicking the System name BI_BO_DEMO and provided the following parameters for each Property Category.
    CRYSTAL Enterprise server:
    Host Name of Crystal Enterprise Server      :     BODEMOSER.srv.com:8080
    Path of Crystal Enterprise Server      :     /SAP
    Protocol of Crystal Enterprise Server      :     http
    User Management
    Authentication Ticket Type     :     SAP Logon Ticket
    Logon Method                :     SAPLOGON TICKET
    User Mapping Fields 
    User Mapping Type
    Connector
    Application Host       :     BIDEMODER.srv.com
    Gateway Host       :     BIDEMODER.srv.com
    Gateway Service       :     sapgw00
    Logical System Name       :     BIDCLNT001
    Remote Host Type      :     3
    SAP Client            :     001     
    SAP System ID      :     BID
    SAP System Number       :     00
    Server Port 
    SNC Library Path 
    SNC Mode - Select -01
    SNC Name 
    SNC Partner Name 
    SNC QOP (Security Level) :     0
    System Type      :     SAP_BW
    Trace Mode           :     0
    System Alias
    Created a System Alias as : SAP_BW
    And tested the connection where it gives as
    Test Connection with Connector
      Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this system object
      Results
    Retrieval of default alias successful
    Connection failed. Make sure that Single Sign-On is configured correctly
    Whether i should install the BO Integration kit in EP portal also or any Portal Inetgration kit is available.
    Regards
    Bala

    Hi,
    1. Whether Integration kit for SAP should be installed in EP Server also ( which has been installed in BO server for BI and the SSO for BI and EP STRUSTSSO2 also works fine.
    - the portal is acting as the frontend for viewing content and yes there needs to be trust between your portal and your BW system
    2. the connector parameter and the iview template object parameter as correct as per the distributed enviorment.
    When i checked with portal; admin they asked doubt what should be crystal enterprise server ( BO) and the what is the server should connector parameter should have.
    - the Crystal Enterprise parameter do not influence the connector properties and do not lead to the point that the connector settings fail. the Crystal Enterprise parameters are only relevant when viewing SAP BusinessObjects related content.
    Make sure you connector settings work even without the Crystal Enterprise parameters first.
    ingo

  • HPDM 4.6 - _Enroll Certificate with SCEP Task Template missing

    I recently upgraded our HP DM to v 4.6 as I was searching for a better way to deploy CA certificates to our t510 thin clients, and this version supports SCEP.
    I also downloaded the Client Kit ThinPro-4.4-SCEP-0.0.3 software (via the Template > Import > HP FTP Software Component Browser) and this is visible in the list of Task Templates.
    The problem I have is that the HP DM User Guide for this version outlines Enrolling Certificates using SCEP by double clicking on the _Enroll Certificate with SCEP task template, which I don't seem to have?
    How do I obtain this particular task template?

    I have already downloaded that add-on. It extracts to a .xar file, which I placed in the HP Smart Client Service\auto-update path. This is the add-on that gets pushed out to the clients at power-on.
    What I need is the _Enroll Certificate with SCEP Task Template for HPDM. I've tried the template import function but I don't seem to have the necessary .jar file?
    Am I missing something? I'm a bit of a noob with the HPDM software...

  • Sharepoint 2013 some List Templates missing in add an app

    I am using sharepoint 2013. I uploaded 13 list templates in gallery but i can view only 8 templates other templates are missing when i am clicking
    add an app. Whats wrong this? Thanks in advance.

    Hi,
    According to your description, you uploaded 13 list templates in gallery,
    some List Templates were not visible on add an app page.
    Let us verify the following:
    What kind of template you used for the Site, publishing or Team?
    Did you activate the Team Collaboration Lists feature at the site?
    Compare the difference between the 13 list templates you uploaded in gallery. Probably these list templates are using different site definitions.
    Here are two links similar with your issue , you can take a look at:
    http://sharepointfarmer.com/deployed-list-template-is-not-visible-on-add-and-app-page-on-create/
    http://www.go4sharepoint.com/Forum/uploaded-list-templates-not-appear-15885.aspx
    Best Regards
    Lisa Chen

  • Logic X - Exs24 missing "legacy instruments" folder

    HI,
    I'm missing the Legacy Instruments folder in my EXS24. It's not in the sampler, and it's not in the file system (/Library/Application Support/Logic/Sampler Instruments). There _should_ be a folder there called "12 Legacy Instruments", but it doesn't exist.
    I've found a few other threads on this and tried:
    repairing permissions.
    REindexing Spotlight
    re-downloading Legacy and Compatibility from Download Additional Content
    Suggestions please?
    Thanks!
    logic 10.0.7
    Mac 10.9.4

    OK, I figured out that this Legacy content is on the Logic 9 install disks. Here's how I solved it. I used Pacifist, which was mentioned in some other threads, but not really explained. I was also unsure whether this was a Logic 9 legacy issue, or something from way back in Logic 7 or 8. Hopefully this will help someone....
    1. Download and install Pacifist from Charlessoft
    2. Get all your Logic 9 disks ready, and open the Logic Studio Install disk in Pacifist. (You will need to insert all the Logic disks to open the complete package.)
    3. in Pacifist, search "legacy". In mine, this gave 5 results: Legacy Bass Guitar, 10 Legacy Instruments, 04 Logic Legacy Kits, 12 Legacy Instruments, and 06 Legacy Spaces. The Pacifist browser window shows the file path.
    4. In the Pacifist browser, right-click (or control-click) on the folder, and choose "Extract to Custom Location...", and extract to the corresponding location on your hard drive:
    /Library/Application Support/Logic/Channel Strip Settings/Track/04 Bass Guitar/Legacy Bass Guitar/
    /Library/Application Support/Logic/EXS Factory Samples/10 Legacy Instruments/
    /Library/Application Support/Logic/Plug-In Settings/Ultrabeat/04 Logic Legacy Kits/
    /Library/Application Support/Logic/Sampler Instruments/12 Legacy Instruments/
    /Library/Audio/Impulse Responses/Apple/06 Legacy Spaces
    That should be all you need to add the Legacy content, without doing a full install. They are all just presets, except the EXS stuff, which is presets and samples — so if you want that you need to add both the EXS Factory Samples/10 Legacy Instruments AND the Sampler Instruments/12 Legacy Instruments. Otherwise they can be added modularly.

  • Office 2010 Administrative Templates - Missing Policies

    I have an Office 2010 GPO that needs to enable a policy called "Disable username and password" located at:
    Computer Configuration --> Admistrative Templates --> Microsoft Office 2010 (Machine) --> IE Settings
    It seems that policy, and any policy that should be there, does not exist.
    I have added the admistrative template (.adm) files  for the Office 2010 32-bit version. I have even added the .admx files to \\mydomain\sysvol\mydomain\Policies\PolicyDefinitions as well as added .adml files to "" ""\en-us.
    Is there a step that I missed? Any help would be appreciated!
    Thanks,
    Jasmin

    Hi Jasmin,
    Before going further, I want to confirm where we got the administrative template files. Besides, we can follow the path of the central store to open
    the admx file of Office 2010 to check whether some files are missing.
    Regarding Administrative Template files for Office 2010, the following article can be referred to for more information.
    Office 2010 Administrative Template files (ADM, ADMX, ADML) and Office Customization Tool
    http://technet.microsoft.com/en-us/library/cc178992(office.14).aspx
    In addition, we can try downloading the files from the following link.
    Office 2010 Administrative Template files (ADM, ADMX/ADML) and Office Customization Tool download
    http://www.microsoft.com/en-us/download/details.aspx?id=18968
    Best regards,
    Frank Shen

Maybe you are looking for

  • Error in task -Downloading a file from report

    Hi all, This is my code to download the content of report to Excel,Problem i am getting when trying to put heading for numerical fields .Its getting '0' in the heading .For remaining  Fields which are non-numberic its displaying nicely.Could any one

  • No fact table exists at the requested level of detail Error.

    Hi Everybody, Facing a issue on the using  Fact less Fact tables. Scenario: ======== Using two subject areas to develop a report.OBIEE 11g Fact1 --> Compensation Plan Assignments Real Time Fact2 --> Participant Detail Real Time"."Participant Details

  • How to create a Regional Structure and how to use it

    Hi can anyone help me in creating the postal and political regional  structures with T-CODES if u have any documents or screen shots THANK YOU IN ADVANCE

  • Shopping Cart attachment is not visible in Purchase order

    Hello All I am new to SRM world and struggling with below issue. When we are attaching documents in shopping carts then those documents are not visible in back end purchase orders. Problem here is that this scenario is running fine on our productions

  • How to handle exceptions thrown by event

    Hi all, i have this slight problem, i'm trying to handle accessing a databse from a button click, i'm trying to simulate somebody logging on to a network. the code is as follows; *@author James Taylor *@version 30-11-2003 *Logon gui import java.awt.*