Logical port is not active

Hi ,
I created a client proxy for a webservice.
But the test program of this proxy threw an error that the logical port was not active for this client proxy.
My plattform is a german version. so the original error text looks like : Fehler bei Instanzierung der Webservice Laufzeit: Der logische Port "xxxxxx" zur Proxyklasse "xxxxx" ist nicht aktiv.
I 'm wondering how I acvtivate the port.
Thanks in advance
yy

Ok,
I found the error. Another process block this port. Now, I have the service HTTPS active.
Thanks.

Similar Messages

Logical port could not be determined

I try to send a WS RM Message from XI server to ABAP system. I get error :" Error while determining the logical port"
Please suggest where is entry for logical port?

create an entry for logical port in tcode IDX1
Reward points, if helpful,
Sandeep Kaushik

Consumer Proxy changes in Logical Port do not work

Hi all,
i have created a consumer proxy on ce 7.11 and i want to change the url of the endpoint on my production system. as i am using nwdi i can't change the url in the wsdl.
when i change the endpoint url in the single service configuration, the changes are not used by the consumer proxy.
could anybody tell me if he experienced a similiar problem and provide a solution to me ?
br,
martin

I have this same problem with my Satellite C55-B. Headphone jack and the USB port right next to it both quit working apparently at the same time. This laptop is only a year old and I have tried loading this driver for the audio jack with no luck.
Realtek Audio Driver File: tc40213600i.exe DOWNLOAD Version: 6.0.1.7195 Posted Date: 2014-04-07 (recommended by moderator Peter in another thread)
So what am I dealing with here? A hardware issue or a software issue? Thank you.

Example wsdl and logical port for consumer proxy anyone ?

Hi,
Could please somebody give me an example of external WSDL file and logcial port created for the WSDL file in SOAMANAGER ?
I need to create manually logical port for my consumer proxy and I am missing something because my logical port is not active.
Any example is more than welcome.
I need to know how to populate fields manually on the following tabs based on the info in a WSDL file:
Consumer Security Additional Information Web Service Addressing Messaging Transport settings Message Attachments Operation specifi
Thanks and Regards
Agnieszka
The message, I am getting, when creating logical port is:
Operation 'SrtFmStatefulTf' not found [NS: 'urn:sap-com:document:sap:soap:functions:mc-style']
I think that maybe something is wrong with my wsdl.
Edited by: Agnieszka Domanska on Nov 17, 2010 5:41 PM

Hi Milan,
this kind of error occurs when there is no service and end point description in the WSDL of provider who's service you are trying to consume using Consumer Proxy.
Just open the provider's WSDL URL that you have given while creating Logical port for the consumer proxy and check if service and end point exists there.
Thanks
Sunil Singh

** Logical Port in Client Proxy

Hi Friends,
I am doing proxy to web service scenario. My proxy is client proxy. After I created proxy, I checked that. There is no standard method 'EXECUTE_ASYNCHRONUS'. I read the Michal's blog /people/michal.krawczyk2/blog/2009/06/20/pixi-abap-proxies-say-goodbye-to-executeasynchronous-method and understand that this method is not created. The reason is that SAP_BASIS support package level is 15. (Release 700) in our R/3 ECC 6.0 system.
Now, I am not able to test my proxy from SPROXY tcode. It asks Logical Port.
1. Can you tell me, what is logical port ? How do I create this in LPCONFIG tcode ?
2. Once this is done, can I call the class with the method like in older version ?
3. Currently I am getting the information 'No vendor specified' while test proxy withe empty logical port.
Expecting your reply.
Kind regards,
Jegathees P.

Hi Rene,
If a logical port is not configured, the X/PI Runtime will be used instead.
In Jegathees' case, this is probably what happened. If you want to route your message through PI then you need to make sure that you are pointing to your Integration Server (i.e. PI), on ECC use transaction code SXMB_ADM --> Integration Engine Configuration. Role of Business System should be "Application System" and "Corresp. Integration Server" should be your PI server.
You will see when you test your client proxy (using TCode SPROXY) you have the option of choosing XI Runtime - or - Logical port too.
Regards, Trevor

When I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active it won't show closed captioning even though closed captioning is turned on

when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on. When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back. I never noticed this with os leopard, Just after i installed os snow leopard. All software is up to date only I think, thanks to apple they droped support for logic express. Thanks for any suggestions.

Does toggling CC off & back on bring it back?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Creating new logical ports for WSDL with several port types not working

Hi all,
I am trying to integrate some BODS webservice into the BPM. I am using CE 7.2 Kernel Version: 7.20.3710. When I am trying to assign a provider system in the application configuration I get following error:
The provider system successfully found the needed service, but its wsdl is without webservice policy. Thus the generated client configuration might not work because of different configurations between service and client (most probable a difference in the security settings). Either assign a provider system with access to wsdl with policy or manually create the client configuration.
The regarding provider system is using a communication profil where the authentication method is set to "none". Normally this configuration should work, but it isn't.
So I started to create new logical ports for each port type. But then I get the error:
Port type name of loaded WSDL does not match the port type name of the Service Reference.
I checked already the port type names in the WSDL but they are 100% the same. What I found was that the configuration is always trying to use the first port type in the WSDL. So I am not able to configure the other port types in the service group.
I also tried to do the same thing using a WSDL with just one port type and surprise it is working...
I hope somebody can help me out
Thanks in advance
Andy

Hi Andy,
Please check this Link: https://cw.sdn.sap.com/cw/docs/DOC-45012
Regards,
Naresh B

Error activating logical port for service group

Hi,
I reconfigured the Starter Services because I changed the backend.
It all worked fine, but in SOAMANAGER it throws an error when trying to activate logical ports for service group /IWCNT/BPC_SERVICE_GROUP (error is thrown for all 4 service groups he wants to activate)
Configuration of proxy '/IWCNT/CO_BPC_CONT_BYID_QR_OB' failed
    Failed to create logical port for local shortcut.
         Service group '/IWCNT/BPC_SERVICE_GROUP' is not assigned to the own business system.
            Failed to create a logical port using Service Registry.
                Use profile name = 'SAPLOGONPROFILE' version = '4'
                      Failed to create a logical port for inbound interfaceCustomerERPRelationshipContactPersonByIDAndContact'            'http://sap.com/xi/APPL/SE/Global'
                             UDDI error: No Primary Services Registry maintained in this System.
I checked:
1. The provider system name
2. WSIL works fine
3. The profiles used are the same
If i take a deeper look at the service groups there where no logical ports created.
Thank you
Regards
Pit

Hi Alex,
I followed the steps mentioned in the guide (3.3.2) but it didn´t work at all.
The services uses all the same profile. The profile is importet in the SCL.
When I process the pending tasks this massages shown up:
Failed to create a logical port using WSIL (This step is red)
Use profile name = 'SAPLOGONPROFILE' version = '4' (This step is OK = green)
Target WSIL type SAP_6.40 (This step is OK = green)
Failed to create a logical port for inbound interface 'CustomerERPRelationshipContactPersonUpdateRequestC' 'http://sap.com/xi/APPL/Global2' (This step is red)
   Could not determine service using WSIL query (This step is red)
Is it normal that on the SCL, in the Business Scenario Configuration there are no entries in the Service Definitions for the Duet_Starter_Service_All scenario.
Regards

LPCONFIG Error while activating logical port

Hi
While creating logical port to a proxy class via LPCONFIG, I get the following error message
Message no. SRT_LPREG029
Configuration is valid but messages exist
I am able to save it but not able to activate it.
Please let me know the solution.
Thanks & Regards
Madhu

Hello Inaki.
it occurred after EHP3 upgrade on CRM 7, before it was working properly.
Thx
Matus

SOAMANAGER create logical port not allowed / forbidden

Hi all,
when trying to create a logical port, the window goes blur and the mouse pointer changes to a forbidden traffic sign, and I am not allowed to do anything else than reload the page and go to frontpage of SOAMANAGER. However I can see in the backgroud the "Web Service Administrator" page.
We are in SAP BASIS 700 P0026.
I don´t find any log file entry, neither ICM trace entry regarding this. I have tryed also all kind of web browsers and information on internet did not result in any similar case.
Any help is very usefull. Thanks,
Pedro

Hi Eitan,
Please refer this link this might help you.
discussion:http://scn.sap.com/thread/1379938
Thanks,
Vidyasagar

VMware ESX Cluster Port Groups not Replicated as Network Sites in SCVMM 2012 Logical Switch

To whom it may concern,
We have added our ESX 4.1 Update 2 Cluster that's being managed by VMware vCenter to SCVMM 2012 because we want to create a private cloud and use the resources of the ESX cluster. SCVMM is replicating all the vSwitch from the ESX cluster as a logical network
but it's not replicating the port groups on the vSwitch as Network Sites associated to the Logical Network.
May you please advise or confirm that this is the normal behaviour of SCVMM? Or is there any way that SCVMM would be able to recognize the port groups associated to the ESX vSwitch and replicate it a a Networks Sites associated to Logical Switches?
Your prompt response will be greatly appreciated.
Thanks in advance!

Hi Graham,
Thanks for your reply.
I understand that we need to configure the port groups in the vCenter server but SCVMM is only replicating the vSwitch as a Logical Network but not the port groups. It should also replicate the port group as a network site associated to the logical network.
On our VMware environment, we have port groups on different VLANs and being mapped to one physical NIC. When creating a VMware VM in a private cloud with a self-service user role we can't select the option to connect the port group that we've created from
the vCenter server. The only option it gives is the logical network (vSwitch) not the port groups within that logical network (vSwitch). Even if we create network site within the logical network (with assigned VLAN) in SCVMM, it randomly selects the port group
within the VMware vSwitch when we create a VM. We need the users with a self-service role to be able to select the port group from our vSwitch to assign the virtual NIC of the VM to a specific port group. In this way, they don't have to call or email us to
assign the VM to a port group.
I still don't understand why SCVMM does not map the port groups we've created from VMware vCenter server with user that has a self-service role. Is there any other way so that we can map the port group automatically to SCVMM?
Please advise. Thanks!

Hierarchy monitoring detected that the ConfigMgr SQL Server ports 1433,4022, are not active on Firewall exception

SMS_HIERARCHY_MANAGER reports (Message ID=3353):
"Hierarchy Monitoring detected that the ConfigMgr SQL Server <fqdn> ports 1433,4022, are not active on Firewall
exception."
This is a fresh SCCM 2012 environment with no firewall active. SQL is installed on the same server as SCCM 2012. Is there a way to fix this without enabling the firewall?

Check this out
Issue:
ConfigMgr logs the error even though Windows Firewall is disabled or it is enabled and all exceptions are added to SQL Server(s).
Environment: I had an environment consist of a two node SQL Cluster hosting ConfigMgr database and a separate ConfigMgr primary site server
Resolution:
Windows firewall service must be started on both SQL nodes and ConfigMgr itself . As soon as the service is started exceptions for TCP 1433 and 4022 must be added to SQL nodes firewall.
After that the firewall profiles can be disabled using:
netsh advf set allp state off
This is true but if you disable the firewall even thought you have opened the Firewall port then disabled the firewall. The status message will continue to be generated and your site server will still be in an error state.
Notice that I said "disabled" and not "turn off".
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

3560 V2 48pt Switch - second transceiver port not active

I have a 3560 V2 48port switch that is working in a live environment and has a transceiver connected into one of the two transceiver ports and is working without issue.
I am connecting a second fibre run to this switch. I have connected the transceiver with the fibre cable connected into the second transceiver port on the switch. However, I am seeing no activity at all. As I test I connected it into the currently working port and saw activity so I know the fibre run, fibre cable and transceiver are all functioning correctly. The issue seems to be with the second transceiver port.
Is this a fault or is this something that needs to be configured in order to 'enable' the second port.
Thanks,
Seán

If the cabling and the optics are all good, then maybe the interface is in shutdown mode.
try this
config t
interface x/x (this is the interface you have the fiber connected to)
no sh
exit
exit
wr
To verify the interface is up or down
sh ip int brie gix/x
If the above suggestion does not help, try crossing the fiber strands on one side of the connection.
HTH

Error while creating logical port in SOAMANAGER

Hi,
Im consuming the webservice.While creating the new logical .Im getting the following error.
Error: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:401Unauthorizedhttp://vmtmasterdev.rune2emaster.rune2e.com:1080/sap/bc/srt/wsdl/sdef_Z_NUMBER/wsdl11/ws_poli
I have entered logical port name,description, URL for WSDL access.When i press enter i got the above eeror.
Please help me.
Regards,
Brahmaji

Hi,
tell me please wenn you run SOAMANAGER you have to apply an user Authentication or not?
If yes If the service that you want to configure is an Enterprise Service or Self-Modelled Service.
In case of Web Services Please Check again in The ICF Services under
sap/bc/srt/SAP and Check if your Service activated or not.
If you don´t have Access to SOAmanagement you can see the specified Roles hier
http://help.sap.com/saphelp_nw04s/helpdata/en/2b/07074155bcf26fe10000000a1550b0/frameset.htm
Regards
A.Labrache

Logical Port

Hi.
I have downloaded a wsdl file from a BAPI in r/3 4.7. I have created a Proxy object in neatwever 2004s client. I created the logical Port for the Proxy Class.
When I tested the Proxy class I get the followinf error
<CODE>ERROR_WEBSERVICE_RUNTIME_INIT</CODE>
<ERRORTEXT>Error when instantiating the Web service runtime (Logical port 'DEMO' for proxy class 'ZDEMO_ BAPI_SERVNOT_CREATEPOR' is not active )</ERRORTEXT>
Please Advice

I found the problem. The Logical Port needed to be activated indeed.

Logical port is not active

Similar Messages

Maybe you are looking for