Logical System for Financial Accounting FI lacking; information systems
Hello,
we`ve got a problem with the creation of a SC. After the selection of a product (doesn`t matter if it`s a "free text", good or service), we got always the following Error:
"Logical System for Financial Accounting FI lacking; information systems"
I`ve already checked the attribute "ACS" in PPOMA_BBP and the RFC-Connections. Have anybody an idea, what i can do else or where i can get further information about this error (like System Log,...)?
Regards Jochen
Hi Jochen,
Kindly check the following SPRO settings in your system
1. SPROSRM ServerTech Basic settings--Define backend system for Prod category. (Ensure that your category which you are using in your SC is defined here with source/target system)
2. SPROSRM ServerCross App Basic Settings--Define Objects in backend systems. (Ensure that Purch grp, prod category, source system, and PO details are maintained here)
3. SPROSRM ServerCross App Basic Settings--Define G/L account for prod category. (Ensure that your Prod category, Source system, Acct assgnmt categry and G/L account are maintained)
Pl check the above and revert back.
Regards,
Nikhil
Similar Messages
-
Sap FICO Certification for Financial Accounting with mySAP ERP 2005
Hi,
I would like to write SAP-FICO Certification for Financial Accounting with mySAP ERP 2005
Topic areas:
SAP overview, Financial Accounting Master Data, Document and Posting Control,Special General Ledger Transactions, Document Parking, Substitution and Validation ,Payment Program, Dunning Program, Correspondence, Interest Calculation,Evaluation Options in Reporting ,Closing Operations in Financial Accounting ,Asset Accounting,The New General Ledger,SAP Solution Manager.
If anyone have the Material for above topics, please send me my mail Id: [email protected]
if anyone appeared recently for certification for the same code, please send model questions and answers.
i will be very thankfull to you.
Regards,
SatyaprakashHi
I am also writing SAP-FICO Certification for Financial Accounting with mySAP ERP 2005.
Request you to send me whatever the material you have in this regard.
thanking you in advance
Suri -
Attribute for user contains errors. Inform system admin
Hello,
We've got an issue with shopping carts created by a user that was deleted from system. When trying to see in Monitoring Shopping Carts header or item details of a given sc. A web error occurs:
The URL http://srp.srm.gruposalinas.com.mx:8000/sap/bc/gui/sap/its/bbpsc11/! was not called due to an error.
Note
The following error text was processed in the system SRP : Attribute for user contains errors. Inform system admin.
The error occurred on the application server srm-pro_SRP_00 and in the work process 2 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
We've cheked SAP NOTE 312058-BBPPU99: Error: Attribute for ... is missing. Inform ...
But it seems that none of the information applies to us, since this issue is only present for Shopping carts that were created by this deleted user.
So we tried to re-assing one of this sc, chaning PARTNER_NO,ADDR_NR
ADDR NP data in table CRMD_PARTNER according to a new given user, but it didn't work. So we need to know how to re-assing this sc or perhaps how to find what specific attribute is missing.
Any advice is welcome.
Thanks in advance.Hi
<b>Which SRM version are you using ? This is an SRM error message.</b>
The manager role should be enough to change user attribute. The transaction is BBPATTRMAINT. Employee role should have BBPUM02 or BBPAT05 to change their own attribute.
<u>Please check whether the User ID you are using to Log into BBP_PD (and seems to be assigned in the org structure also)is consistent and has no errors in tcode USERS_GEN. You should check the user, it's not set up properly in USERS_GEN Transaction, Else repair the user.
To maintain the user attributes you must have the Administrator role.. Your user should have role SAP_BBP-STAL_ADMINISTRATOR and be integrated in the org structure. your user must be integrated in SRM organizational structure. To see which attributes are missing, you can click on the user in PPOMA_BBP to see details, and go to last tab "Check". This will list all required attributes depending on used scenarios (so you may not require all of them). You can also use transaction BBP_ATTR_CHECK to check user's attributes for a particular scenario.</u>
<b>Please go through the following links as well -></b>
bbp_mon_sc attributes
Re: FM for attribute's value assignation in PPOMA ?
Note 751022 - Monitor Shopping Cart: Item deletion causes termination
Re: User Settings are not saved
Re: Not able to generate user users_gen
Re: SRM organization plan...
Re: User creation error
<u>Hope this will definitely help. Do let me know.</u>
Regards
- Atul -
No data found for contact person '2000000243'. Inform system administration
Hi expert,
i found error 'No data found for contact person '2000000243'. Inform system administration'.
When check in program: HRALXSYNC, no error found.
Thanks and Regards,
FarizHi,
You have to maintain contact person for the supplier, as an SRM admin the list of suppliers dispalyed select the vendor against which you want to create the contact and click on "Create Contact Person with reference" maintian all the required entires and you will be able to see this contact details in you RFx while selecting the bidders for RFx.
with regards
Manjunath -
Cannot see the tab for Financial Accounting in SPRO after Support Pack
Hello,
We applied support pack level 21 for SAP_APPL and after the application of it (Still in the correction phase), the tab for Financial Accounting has disapered from SPRO. Has anyone faced a problem like this before?
Any pointers to the same will be very much appreciated.
Thanks in advance
Best Regards
Anirbanhi Anirban,
basically it is something with the New G/L funcionality, you should have Financial Accounting (New) anyway, but can you do a authorization check? Right after you press F5 in SPRO, /nsu53 into the command line...
hope this helps
ec -
Looking for class for Financial Accounting
Hi all,
i'm looking for class for Financial Accounting, i need to read document like transaction FB03.
Thanks.
Cheers.Hi
What do u need?
Which class?
Max -
Does OIM Connector for AS400 support provisioning of "Information Systems"?
A customer is asking to configure OIM’s connector for AS/400 with the set of attributes natively supported (a.k.a. documented) by our connector, plus another one, named, in Italian, “Sistemi Informativi” (“Information Systems”).
As far as I can understand from the Customer, and by reading some documents downloaded from the Internet, an “Information System” is a set of AS/400 libraries that the End-User Administrator can enable for the user.
The possibility to configure one or more “Information Systems” seems to be enabled by the installation of a (quite popular, according to my Customer) AS/400 module named “Modulo Base” (“Base Module” in English”).
Does anyone have any experience about this feature?
Regards,
Angelo CarugatiIt is a separate connector.
Talk to your Oracle sales person to get more information about the licensing. -
OCI Catalog for Vendor problem : Logical system for catalog not maintained
We have set up an OCI catalog with on of our vendors. This works fine untill we transfer shopping basket data from Vendor sysem into our SRM-system (SRM5.0). Then data is not being transfered and Vendor Webshop screen remains 'open'.
in SLG1 i have found an error "Logical system for catalog not maintained. Inform system administrator'
Anyone an idea what the cause of this error can be or what we need to check ?
Thanks in advanceHi,
I have not seen that error before. However, I think it may have to do with the LOGICAL_SYSTEM OCI field. Can you check if your punch-out catalog vendor is populating that field? Also, check if you have the correct BP# populated in the catalog configuration and the LOGICAL SYSTEM Field on the define External Webservices is blank.
SG -
Import Portugal - Specific forms for financial statements
Hi
in SAP Service Marketplace, using the quick link globalization for *Portugal* I found the following information:
Import forms 0PT-ACTIV-01, 0PT-PASSI-01and 0PT-RESUL-01 from client 000 to your development client. To do this, in Customizing for Financial Accounting, choose General Ledger Accounting ® Information System ® Drilldown Reports (G/L Accounts) ® Form ® Import Form from Client 000.
I have tried to import forms 0PT-ACTIV-01, 0PT-PASSI-01and 0PT-RESUL-01 from client '000', but the forms are not available.
Does anybody know how I can get those forms or if I am doing anything wrong?
CheersBruno,
Thanks for your answer.
Yes I checked note 353539 and did the steps you mentioned above.
When executing 'Import Form from client 000u2019 the system shows me 3 options:
- Reporting for Table FAGLFLEXT
- Payables According to GL acc
- Receivables According to GL acc
I selected the first one and then the following forms appeared
Choose objects to be transported
Form 0SAPBLNCE-01 Fin. Statement: Actual/Actual Comparison
Form 0SAPBSPL-01 Fin. Statement: Actual/Actual Comparison
Form 0SAPBSPL-02 Fin. Statement: Plan/Actual Comparison
Form 0SAPFS10-01 Transaction Figures: Account Balance
The forms that I am looking for are not available. Do you think that am I doing something wrong? Have you checked in your system that Portuguese forms are available? What version of SAP are you working with? I am at ECC500
thanks you very much -
Hi friends,
I am new to XI/PI I am working with IDOC to Flat file scenario I am facing the folllowing error.
No Service for System SAPECC(Sender Port), Client800(R/3 system client 800) in integration Directory.
can any one tell what was the reason for this error.
Thanks in Advance,
Ravi Yasoda.Hi Ravi,
Have you imported the Business System in Integration Directory?
Check whether you see the logical system name in adapter specific identifiers or not...
Also check from integration directory that cache notification was done and also check SXI_CACHE in the abap stack.
See this thread...
No service for system SAP***, client 001 in Integration Directory
Please go through below content from sap note for your issue...
Error message: No service for system SAPABC client 123 in the integration directory
Solution:
You send IDocs from system ABC to XI. In the control record of the IDoc,the SNDPOR field contains the value "SAPABC". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the
type (business-system/business-service):
Business system
-> Activities in the System Landscape Directory (SLD)(Create technical
system):
Create a technical system for system ABC in the SLD, and create the client for this. Do not forget to assign an "ALE logical system" (for example, "ABCCLNT123") to this technical system.
SLD (Business system):
You can now explicitly assign a business system to this client. For more details, refer to the SLD documentation.
Activities in system ABC (self-registration in the SLD):
Alternatively, you can register the system in the SLD in system ABC with Transaction RZ70. You will find detailed information about the SLD registration of systems on the SAP Service Marketplace for the
"Exchange Infrastructure" in the document "Exchange_Installation_Guide.pdf".
In system ABC, you can check your configuration with Transaction SLDCHECK.
Activities in Integration Directory (import business system from SLD):
You will find the business systems under Services Without Party in the Integration Services. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical
system under "Objects"->"Adapter-specific identifiers". Use the Import/Update button to copy the data from the SLD, to create business systems, or to update their identifiers.
Business service
-> Activities in the Integration Builder directory:
You want to create a service without party that is not part of your system infrastructure and is therefore not maintained in the SLD. In the Integration Builder directory, you will find the "Business-Services" under Services Without Party. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific
identifiers".
Activate the change list in Integration Directory.
In system ABC, you can restart the incorrect entry from Transaction SM58 .
Regds,
Pinangshuk. -
Witholding Tax Information system (J1INMIS) Not updating (FICA)
Hi Experts,
We are using ECC 6.0 recently we upgrated with EHP 5. And the current system (FICO) is working fine with TDS calculations and Witholding Tax Information system (J1INMIS) gets updated perfectly.
We are implimenting FICA (student Accounting). FICA has a provision to calculate the TDS so all TDS Calculations done in FICA.
While we transfer the data from FICA to FICO all GL's gets update even TDS GL also getting update. But when I Check the Report Witholding Tax Information system (J1INMIS) the TDS calculated from FICA is note appearing in this report. But appearing in TDS GL's.
I assume FICO system will not have any Vendor information because In FICO all vendor balances will get update to only reconciliation key as vendor are in FICA system.
Another problem is how I can take TDS Certificates for vendors If the Tax Information system doesn't update.
Please suggest.....
Kind Regards,
ShivajiTo get TDS certificate we use T code J1INMIS, Pls dont go to This T code: Follow this:
1. J1INCHLN
2. J1INBANK---Bank no, will be Check Issue A/C.
3. J1INCERT----In this document date should be end of the month date exampl=31/03/2011
After giving all the details in J1INCERT
select - Ctrl S (Save the document_
you will see the below screen (Variant) give variant name XXX Description (Check Printing)
save, you will get 16A Form. -
HR: POSTINGS TO FINANCIAL ACCOUNTING
Below is the menupath for HR postings to FI. I want to understand where are they linked to FI. How can I see the G/L accounts these symbolic accounts are linked to.
SPRO -- Payroll -- Payroll USA -- Posting to Financial Accounting -- Activities in HR
System -- Define Symbolic Accounts
Thanks
LakshmiEach of the field symbol would be assigned to GL account. You will find this mapping the payroll img itself
Payroll -- Payroll USA -- Posting to Financial Accounting -- activities in AC system
-Account assignment
Click on the Assign financial accounts
then click on the Accounts to see the mapping of sumbolicaccounts to GL account. -
Hi experts..m facing a problem as mentioned below from the user end..can u please suggest wat kind of problem it is....
On the time of Posting the vendor Inv.(MIRO) system showing flowing
message,.
Financial accounting programs are being generated automatically
Message number FAGL_LEDGER_CUST201
Diagnosis
During the automatic check on the Financial Accounting programs
generated, the system established that these programs need to be
updated.
This is an uncritical problem that typically occurs after the
implementation of a new release (upgrade), of an enhancement package,
or
of a support package.
System response
To avoid any inconsistencies when postings are made or reports are run,
the programs need to be generated again.
Regards,
RamanHi Raman,
You will find the related information in SAP note 1365712:
After you import a Support Package (SP) version, generated Financial
Accounting (FI) programs are not automatically regenerated
As a result, there may be syntax errors or generated programs may not
not be current.
Note the following:
After you import a new Support Package version, the system administrator
should start the program RGZZGLUX once so that the users do not have to
perform the process described above.
Regards,
David -
Change Open Item Management for GL accounts
Hi All,
Good Day.
I would like to asked if you have any idea on how to solve the error we encountered upon opening our open item management for our GL? The error is Line item total does not tally with account balance. Message no. FH099.
We have a Z* program customized from program RFSEPA02, we test it out in our QA and it was working fine. Even if the GLs has balance in QA.
But when we transfer it in Production, we encountered this kind of error.
Any idea how to solve it, i tried reading other questions on this forum with the same error, but i cant find any solution specific for this error.
Please help.
Thank you.Hi,
See the Note 203329 - RFSEPA02 generates FH099 alth. balance = item total
Symptom
Report RFSEPA02 generates the error message FH099: 'Line item total does not tally with account balance' although the item total tallies with the balance and SAPF190 does not show any differences.
Additional key words
RFSEPA01, FIINCON
Cause and prerequisites
Open item management has already been activated once and items were cleared so that cleared items exist in the system for the account. These are not taken into account during the check of the item total with the account balance and cause the error message.
Solution
Reset the clearing transactions using Transaction FBRA.
Thanks & Regards,
Shashi Kanth -
*NO AUTHORIZATIONS FOR CREATING ACCOUNTS IN COMPANY CODE*
HI
NO AUTHORIZATIONS FOR CREATING ACCOUNTS IN COMPANY CODE
SYSTEM MESSAGE:
No authorization for creating accounts in company code 3333
Message no. F2305
System Response
You cannot access the requested data.
Procedure for System Administration
If necessary, include an entry in the user's authorization profile for the authorization object and parameters specified below.
Authorization object:
F_KNA1_BUK
Parameter:
Company code: 3333
Actions: 01
KINDLY THROW UR IDEASHi,
You have not been authorized for this transaction. Please speak with your BASIS guy he will give you the authorization.
Regards,
Abhee.
Maybe you are looking for
-
Missing Pre-order DLC for Bloodborne
Hi, I pre-ordered Bloodborne for PS4. I did it online with in-store pick-up on release. I searched the receipt, emails, account info on my online account and don't see a code anywhere. I put a link to the item I was supposed to get below: http://w
-
Burning problem...not even an error message
Ok I select my desired playlist...then I hit burn disc and the prompt pops "insert a blank disc". I put in a Fujifilm CD-R All purpose Compact Disc Digital Audio Recordable CD in, it says "detecting media" for about 45 seconds...then it just stops an
-
Core hyper-v (bare metal)
Hi, i had a query that what is the difference between CORE HYPER-V and HYPER-V can any one explain me better so that related to licencing if in case Windows server 2008 r2 or 2012 r2 standard editions we can create only two vm's but i need answe
-
Please help me for my email would not open as usual it would
hello can someone help me to open my email from the bar at the bottom of the screen, please
-
OSB does not return SOAP fault
We created a custom webservice using a WSDL. We have the following code within the generated Impl class: LOG.debug("caught Exception sendAlertMessage:" + exc.getMessage()); SOAPFault sf = null; try { SOAPFactory fac = SOAPFactory.newInstance(SOAPCons