Logitech speaker S715i won't recharge my "ipad mini" using the lightning to 30-pin Adapter. Has anyone solved this problem?

Everytime I connect my mini to the Logitech S715i or Logitech Pure-Fi Express Plus speaker a pop-up appears telling me the iPad doesn't recognize the device and the battery symbol shows that it isn't loading. I am using the lightning to 30-pin Adapter.
Is there a way to correct this so my speaker will act as a dock and load the iPad?
Would love the help if you have the know how. Thanks!

Since the last update I have noticed the percentage of battery power does increase when my iPad mini has been docked although the actually staus reported on the iPad screen while docked is 'not charging'. This is obviously an Apple recognization problem (not sure about third party as Apple is providing the software).
Will not return my Logitech as it has excellent sound (speakers are higher watt then others in this price range), plus it has a built in battery which means I can take it on the terrace for tea in the afternoon.
As pointed out it requires more power then the iPhone, it does take longer to charge, so in the future if I need a quicker charge I'll do it via a wall outlet.
side note: This problem must also be why my iMac is shutting down all other USB devices when the iPad is plugged in.

Similar Messages

  • TS2634 Can my iPad mini use the same 12 watt power adapter that the iPad uses?

    The small one-inch square power adapter that came with the iPad mini no longer works. A Best Buy employee told me I should be using the larger 12 watt adapter that comes with the iPad. I don't want to damage my mini by using the wrong one. Help?

    Absolutely no problem.  The device will draw only as much energy as it can safely absorb.  The 12W rating for the charger is maximum available power.
    I've been using a 12W charger with my iPod for about a year now.

  • My daughters iTouch won't allow her to send me a message to my iPhone. Has anyone had this problem? It just recently started.

    It seems to only be with me on my iPhone, she is able to text with others. I can't find a place where I may have accidentally blocked her.

    Try here:
    iOS: FaceTime is 'Unable to verify email because it is in use'

  • TS3274 my IPad has one half of the screen with vertical multi colored stripes and the other half is normal.  Has anyone experienced this and has a solution?

    My IPad has one half of the screen with vertical multi colored stripes and the other half is normal.  Has anyone had this problem and if so is there a solution?

    You could have a hardware issue, but try this and see if it helps.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector.

    Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector?

    The lightning to 30 pin adapter does not support video as per the item description in the Apple online store:
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
    This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported.
    You will need to the Lightning to VGA adapter directly
    http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter?fnode=3a
    Or the Lightning Digital AV Adapter
    http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
    If the projector supports HDMI input.

  • HT4943 I bought a magazine subscription on my iPAD and after being charged, it does not come up on my screen.  Has anyone had this problem?

    I bought a magazine subscription on my iPAD and after being charged, it does not come up on my screen.  Has anyone had this problem?
    When I click on the magazine, my screen is just blank.  I can see the purchase, and in my settings/store, the magazine shows "ON".

    I would do a power cycle/reset of your device first, if you haven't, to rule that out.
    http://support.apple.com/kb/HT1430
    If that doesn't help, talking to iTunes customer support would be in order...or whoever you purchased the magazine subscription through. 
    http://www.apple.com/support/itunes/
    If the magazine is browser based, you might also try another browser.  I like "Atomic Browser".  It is available on the app store. 

  • I have just updated my ipad mini with the new ios software and it has caused may ipads onboard keyboard to run very slowly does anyone no how to fix this issue

    I have just updated my ipad mini with the new ios software and it has caused may ipads onboard keyboard to run very slowly does anyone no how to fix this issue

    *Typing lag iOS 7*
    Settings>General>Reset>Reset all settings. This should improve the typing responsiveness
    *Note:* Settings, preferences, network settings, etc will be reset. *NO data or media will be lost*
    and/or
    Settings>iCloud>Documents and Data (turn it OFF)

  • Has anyone had this problem with VPN iPad vpn connection could not validate the server certificate

    Has anyone had this problem with IPad 3 after upgrade to IOS 7,
    trying to to connect VPN , but I get this messag, "could not validate the server certificate".
    I am trying to connect to Oracle VPN.

    Has anyone found a solution for this yet? I am still getting the could not validate server certificate error. I have tried importing the entire certificate chain as well as importing each individual cert in the chain. My certificate works perfectly with the cisco vpn on my pc.
    This is my first experience owning an apple product, and I am very disappointed with the customer support that I have received. I tried calling the help line and no one would even attempt to answer my question. I was then told that the Mac "geniuses" wouldn't know either and that I may be able to find an answer on the message boards. So I am reaching out to the community...Has anyone been able to figure out how to resolve this issue or even the specific cause? Any help is appreciated.

  • TS3694 I am getting a message that says, " The iPad could not be restored. An unknown error occurred (24).  Has anyone encountered this problem?

    Has anyone encountered this problem.  I am desperate!

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
     Cheers, Tom

  • Dreamweaver 2014 won't launch in Mavericks... has anyone experienced this problem?

    I downloaded the new 2014 version of Dreamweaver today & it won't launch in Mavericks... also dowloaded it to my PC & that works OK. Has anyone had this problem?

    Hi Harald,
    Looks like this is happening because of some issue during installation of the product.
    Can you try the following:
    1. Un-install DWCC 2014. Note: Before un-installing, I would suggest you to backup any user preferences files, extensions or site settings.
    2. Log out from your Adobe ID login in creative cloud.
    3. Log-in back again and then download and install the product.
    I am suggesting it since the same process helped one another user. Hence seeing if you are also encountering the same issue.
    -Arun

  • HT1688 My iPad is sending a notification of No Sim. Has anyone experienced this?

    My iPad is sending a notification of No Sim. Has anyone experienced this?

    I experienced this shortly after I got my iPad. I went to the AT&T store, they put a new SIM card in and it's been fine ever since.

  • Apple tv 2nd gen won't wake up mac has anyone solved this yet?

    apple tv 2nd gen won't wake up mac has anyone solved this yet?

    Why Does it need to wake the mac?

  • My brand-new iPad Mini has Siri unresponsive. This happens quite frequently and I find it very frustrating. I have a strong Wi-Fi connection. Has anyone had this problem and fixed it?

    My brand-new iPad Mini has Siri unresponsive. This happens quite frequently and I find it very frustrating. I have a strong Wi-Fi connection. Has anyone had this problem and fixed it?

    Let me also say that this has been functioning this way out of the box...this is not new or a result of cookies or a full cache.

  • I have a ploblem: My Ipad already connected wifi. But I cannot use the safari application or App Store.It's showing "the Internet is not connecting". How to solve this problem?

    What will I solve this problem?

    You may not really be connected to your WiFi network.
    Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • IPad (III) dies 4 weeks after Applecare ends. Has anyone experienced this?

    One of my iPad (III)'s "bricked" when I proceeded to update to the latest version of iOS 7. It just displays an iTunes logo and a picture of the adapter plug. Wjen I plugged it to my MBP and iTunes, I got the message that the iPad must be "restored" and there is no S/N displayed.
    It also happens to be about 4 weeks after the Applecare expired.
    Has anyone experienced this behavior?
    Thanks for your help.
    Naresh

    Just an update on my issue with the iPad.
    I observed a problem syncing my other iPad getting some error code -50. After a search on-line and the Apple Support I found a suggestion to change the USB - 30 pin cable then retry.
    With that change, my problem in syncing my other iPad went away.
    So I tried the same with the first iPad. Presto. I was able to restore the iPad with current operating system software then get all the apps etc. back.
    Still no answer why the first iPad went into a "retore" mode after "upgrading" to iOS 7.1.1.
    But lesson learnt, when having a connectivity problem, check cable as one of the items.
    Thanks again.

Maybe you are looking for

  • How can I put my old Macbook Pro early 2010 audio on my new Samsung HDTV?

    I bought a Macbook Pro in March 2010 that does not support HDMI audio. So, when I am plugging my Macbook Pro on my new Samsung Series 5 5500 HDTV with a HDMI cable that supports audio, I am getting the image, but no audio. When I go to System Prefere

  • Getting error in Migo_gr

    Hi EveryOne , I m getting error in Migo_gr that : "  Field Bus. Area is a required field for G/L account DMRC 141004 " . The bus arear is not visible in Migo_gr . thanks

  • Default namespace problem loading XML

    I am loading multiple rss/xml file. For some of them I have to use namespace (atom feeds) so I write this lines var atom:Namespace = new Namespace("http://www.w3.org/2005/Atom"); var rssXML:XML = new XML();   default xml namespace = atom; I test this

  • My InDesign CC crashes at launch

    Since today my InDesign crashes on launch. I am working on a retina imac with OSX 10.10.2. Yesterday it worked fine. Tried to start after restart, login and out at Adobe CC, de-installed fonts, disconnected al usb devices. Indesign still crashes at l

  • Meld looks broken after (semi-)recent update

    After Meld was updated from 1.8.5 to 3.11.2 about a month ago, it looks like this: http://i.imgur.com/j4mS0l6.png I am using MATE and almost everything looks properly. The only other program with the same kind of visual problems is GHex, and it had t