LOGO is not printing correctly in Production but printing correctly in Qual

Hi Friends,
I am an ABAPER.
In Scripts I had a logo. Problem is in development and quality systems it is printing correctly but it is not printing correctly in Production system. I have tested all the development, quality & Production systems with the same printer. Experts please guide me where exactly the problem is how to solve it. Good points will be rewarded for related solutions.
Hi Nageswar,
The exact problem is the logo is alphabetical characters only, but for example APPLE is the logo. The word Heading 1: APPLE. is in Coloured BOLD letters. In development and quality it is printing as it was original logo. But in Production the letters for APPLE is printing in such a way that A is printing as dotted letter A and so on for PPLE. But in quality and development is working fine Printing as BOLD letters.
Finally want to mention that APPLE is a scanned logo. Its properties were same in three systems i.e, development, quality and production.
Experts please help me.
Edited by: pavan kumar on Feb 6, 2008 12:26 PM

Not correctly in the sense. Please explain the error you are getting.
Hi Pavan ,
Check the printer settings it SPAD transaction and check printer settings were smae in both systems.
Regards,
Nageswar
Edited by: Nageswar Vattikuti on Feb 6, 2008 5:01 PM

Similar Messages

My serial number is "not valid for subscription products", but of course it should be. how do I fix that?

my serial number is "not valid for subscription products", but of course it should be. how do I fix that?

Hello,
general informations you will find there: https://www.adobe.com/account.html and this brandnew website: Serial number and activation support.
In case you bought your program from these firms like Amazon this "serial number" obtained from them is not a serial number, only a code with which you can request a serial number from Adobe.
The following part, so I just see at least ceased to exist on my Adobe website, everything plays out in the link from above. I let it there as an info:
Here you have to go through your "Adobe Store", and look for the button "Serial Number Request". Fill in the form and, after a while you will get a "real" serial number.
Hans-Günter

Canon ir 2420 ufrii LT network printer show only processing but print not receive

My Canon ir 2420 ufrii LT network printer show only processing but print not receive,i have check its ip and network all is fine i also relode this software but result is same , show only processing print not recieve ,please if you have any trick please share , Thaks for you support

I can't find that printer on the canon eu support website (canon uses model numbers on that site, not series designations) , and canon printers are not easy to get to work well on archlinux.
However there are 2 aur packages that provide the UFRII driver :
- cndrvcups-lb (built from source)
- cndrvcups-lb-bin (uses the binaries)

Illustrator PDFs print correctly from PC, but print too dark from Macs

Photoshop and Illustrator PDF files (CS5 & 6) print correctly from my work PC, but not either of my Macs. See below:
At work, I have a Dell PC and an iMac, at home I have a MacBook Pro.
At work there is a big office color Ricoh printer for the Dell and iMac, at home I have a Epson 3-in-one laserjet for the MacBook Pro.
Both the work and home Macs will print Illustrator/Photoshop PDFs very dark/undersaturated/off color on their relative printers, but the work PC prints them correctly.
At work, If you hold up a print of a PDF file printed from the Dell PC, and one printed from the iMac, they are completely different looking - the Dell print matches the Dell and iMac screens, but the iMac print is very dark and dull.
At work, when I open a Illustrator or Photoshop PDF on the work PC and send it to the Richo printer, it comes out perfectly matching the screen, but, if I open it on the iMac and send it to the Richo printer, it prints too dark/off color.
These are the *exact* same PDF files I am opening on both the PC and the iMac - our files are saved on a server so I'm accessing the same documents on both machines.
Also, I create the files on the iMac and save them to the server on the iMac, but if I open them on the iMac it prints too dark, and if I open them on the PC, it prints correctly.
At home on the MacBook Pro, the prints are also much darker than the screen (despite color calibration with a ColorMunki as well as following all Epson's color calibration steps) and I see a similar color problem as printing to the work printer from the work iMac.
Someone please tell me this is just a printer profile thing and I can go in somewhere on my Macs and switch something so they print the same as the PC does!
Thank you in advance for explaining why my Macs are making me pull out my hair!

the iMac it prints too dark
your print space is off on the Mac
or you are applying the wrong source profile or both
on the MacBook Pro, the prints are also much darker than the screen (despite color calibration
EDIT: sorry i misread that as your monitor was also dark, if the mac displays the problem doc proper, you are targeting a bad print space, that's where i would look...
you app is apply the wrong source profile (or your monitor profile is off)
basing the source>print space conversion on the wrong source profile could account for your printing woes
be sure you are embedding an ICC profile in your doc, are opening it in a color-managed app, and it should display properly
be sure your workflow uses the embedded profile and your printer is setup to convert to the proper printer profile
color management theory
epson workflow

Certain webpages not loading correctly in FF, but load correctly using other browsers.

I have noticed that some webpages are loading/rendering differently when using Firefox, but will look correct when using other browsers, IE and Chrome. I have also checked using mobile version of FF, and I have the same issue. Also tried using a different computer, exact same issue arises.
Fore example, here are two webpages that load differently using Chrome and using Firefox:
http://www.welovedates.com/uk/england/london/
http://www.welovedates.com/blog/
Here are screenshots of what I am describing:
Page loading correctly in Chrome: http://imgur.com/urkNyH8
Page loading incorrectly in FF: http://imgur.com/3jlC8ml
Another page loading correctly in Chrome: http://imgur.com/Audu3qd
Page loading incorrectly in FF: http://imgur.com/UniU7ac
I have been searching for an answer for many hours. I have tried different suggestions made in different threads, but I have not been able to find an answer. As mentioned, I have this issue on my computer (which has Ghostery, and No-Script), I have this issue on another computer (with no additional plug-ins installed), and I have this issue on my mobile phone (also no additional plugins).
Any help is much appreciated!

Hello again,
Thanks for responding so quickly.
I have cleared Cache and Cookies, yet the problem is still persisting.
I am not sure what you mean by, "using same log-in preferences for this site on all the devices??" The second computer is my wife's computer and she is the one who originally noted the discrepancy in the different browsers loading the same website differently. I don't know if that response helps in determining if we are using the same log-in preferences for the site. As to actually accessing the site in question, I am not logging in or anything, I am just typing the web address in and noticing it does not render the same as in Chrome.
I have been telling her to just use Chrome and not deal with this issue, but she is having issues with Chrome and her new Windows 8 computer, in which she notices that while using Chrome, her memory usage and CPU usage are peaked at 100%, making her computer run extremely slow. Alas, that is a completely different problem for a different forum!
Thanks,
Alex

PRINTER C7280, NEW CARTRIDGE BUT PRINTER DOES NOT RECOGNISE NEW LEVEL, LEVEL/GAUGE STAYS 0

I HAVE C7280 PRINTER ALL IN ONE, WITH 363 CARTRIDGES. THE COLOR 363 LIGHT CYAN HAS BEEN REPLACED, BUT LEVEL OF NEW CARTRIDGE STAYS 0. BOUGHT AGAIN A NEW ONE, BUT PROBLEMS STAYS. DID CLEANING OF THE HEADS AND ALIGN PRINTER, BUT PROBLEM STAYS. HOW CAN I SOLVE THIS?

Hi
Are you using the control panel or solution centre to check the levels?
Are you still able to print?
Thanks, Ciara
Step one: Check ink levels
NOTE:
The HP All-in-One can only detect the ink levels for genuine HP ink. The ink levels in ink cartridges that are refilled or have been used in other devices might not register accurately.Ink from the cartridges is used in the printing process in a number of different ways, including in the initialization process, which prepares the device and cartridges for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink is left in the cartridge after it is used.
To check the ink levels from the control panel:
Press Setup .
Press the down arrow ( ) to highlight Tools, and then press OK.
Press the down arrow ( ) to highlight Display Ink Gauge, and then press OK.
Press any button to return to the Tools menu.
To check the ink levels from the HP Photosmart Software:
In the HP Solution Center, click Settings , point to Print Settings, and then click Printer Toolbox .
NOTE:
You can also open the Printer Toolbox from the Print Properties dialog box. In the Print Properties dialog box, click the Services tab, and then click Service this device .
Click the Estimated Ink Level tab. The estimated ink levels for the ink cartridges will appear.
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

HP 6110 All-in-one not able to do anything but print?

I have just purchased a late 2013 27" iMac with OS X 10.9.2 and I'm trying to get my HP OfficeJet 6110 All-In-One printer working. The issue is that the print function works just fine, but that's it. I haven't been able to get the scanning function working at all. The HP website shows specific instructions on installing the printer via the OS but it doesn't show the ability for the other funtions other than the "Generic PCL Printer" option when I try and install the printer. Does anybody have any fixes for this?

Scan – HP in 10.9
Scan Problems HP - Mavericks

Printer shows an error but printed the pdf

Hello everyone!
I have a very annoying problem with my Adobe Acrobat Standard.
Whenever I print a pdf, I get the pdf I wanted but the printer in the lower right corner of the screen does not disappear.
It says that their is one document that still has to be printed. And if I open the printer dialog there stands: Error - Printing and the symbol on the screen does not disappear till I cancel the printing job.
I had the same problem two weeks ago. And because it was so annoying I set up my whole windows system.
After that the printer worked for two weeks without errors.
But now it is the same problem as before. And I'm really getting crazy.
How can I solve this problem without setting up the whole system again?
The problem is that I can't only uninstall and the reinstall Adobe Acrobat, cause it is part of the software of my notebook and therfore I have no CD of it.
The problem appeared in Version 8.1.4. I have already updated to 8.1.5 but this made no change.
I hope you can help me.
Denise

Sounds like the now "bog-standard" issue of the Adobe PDF printer using a port other than "*My Documents \*.PDF" or "*Desktop \*.PDF".
Seen it many times.
You didn't say whether you were using XP or Vista so check the appropriate locations based on your OS for the following:
Look for your Adobe PDF printer in the "Printers and Faxes" section of the control panel.
Check the properties of the printer, specifically the port it's using. (On XP it's right-click on the Adobe PDF printer, select Properties, Ports tab).
If it's not either the My Documents or Desktop (one of them should be checked) that's your problem.
If you DO see those two ports as options, check one of them and then select "Okay" and you should be G2G.
If you DON'T see either of those two options the ports were not created during the setup (setup exited before the ports were created as part of a mess up in the MSI install routine) then you need to first close all dialogs, open Acrobat and select the repair option from the help menu.
Hopefully that fixed it, but if your printer ports are not fixed after doing a repair you may have to do a little more work.
Check this link for more in-depth info.
http://acrobathelp.blogspot.com/2008/01/adobe-acrobat-8.html
S.

Print problem of print form_print preview ok, but print failed

Hi, gurus,
the problem is that i can preview my form but i can't print it out.
it seems to be problems with device type. I've already tried almost all device type but it still doesnot work.
Form property:
Preview Type: Print form only one side
XDP preview type: Acrobat 7 static
SPAD Configuration:
Output Device: Standard, PDF1
Host spool access method: F
Host Printer: _default
I am using Adobe Livecycle Designer 8.0 and adobe acrobat 8 professional.
Any help will be appreciated.

There's no need of and no logic in "printing" generated PDF to your Adobe PDF printer which creates PDF files. Why do you want to do that if u already have PDF? If you need to save PDF use save button on Adobe Reader toolbar or built-in functions of SAP solution to return PDF from ADS and save it to server or locally.
At the same time, printing PDF to your HP printer makes sense. Pitty it is not working.
Try experimenting with device types. Maybe create new Output Device, and use some HP device type like HPLJ1100 for it?
As for PDF device type all I can add is just the config of my PDF1 device type (just in case).
Device type PDF1
Name PDF ISO Latin-14.6D+
Attributes
SAPscript handling
Driver PDF1 PDF converter
Page printer Yes
List handling
Printer driver PDF1 PDF Converter
Argument Empty
Printer character set
1. Character set Printer POSTSCPT ISO 8859/1 (Latin 1)
Synt. character set 0
Print Controls
this screen contains a long list of device specific print controls
I'm afraid, that my knowledge on the topic are limited to what was already said.
Please ask you admin for more help.

Strange: don't print from usb pendrive but print from hdd

Hi, i've found this strange behaviour:
if i open a pdf file from a pen drive, and after i try to print it, i have the message: You need to install a printer......
then if i copy the same file to the hdd, then i open this file and print it, now i can print !!
this happen with the reader 8.2.4, so i've update to the new X version and nothing is changed.
i use XP sp3 with hp 6280 all-in-one
someone can explain and resolve it?
thank's
Giorgio

Hi Shellshokd,
Try using the HP Universal Printer Driver which supports a wide set of printers.
The driver is available at this location.
http://www8.hp.com/us/en/solutions/business-solutions/printingsolutions/upd.html
Also, just to let you know ePrint also supports some other formats apart from PDF. You can mail doc, docx, xls, xlsx, ppt, pptx, txt, html, jpeg, jpg, png, bmp, gif and tiff files directly to your printers email ID.
I hope this helps.
Regards,
Oliver
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

OSS note is not working in production but works correctly in test system .

hello friends ,
weh have implemented one OSS notes , which is working corectly in Test system , but not working in production .
Could you please let me know , what could be the reason ?
OSS note no 1064273-
Regards,
Manoj

Pls. check with Basis if the OSS note has been implemented properly and successfully.

HT201413 I do not have an apple product, but I do have Itunes on my computer, and it will not let me play my downloaded music-error message computer needs registered, and it is. Can you help me?

I have had iTunes on my computer, which is not an apple poducts for about 6 or 7yrs now, just recently it will not let me play the music I have downloaded. I get a error message stating this computer is not registered. So I put in the information to register it, and it tells me that this computer is already registered. But I still can't play my music, the error message just keeps popping up. Can anyone help me?

Check the information on the song, Right-Click -> Get Info.
In the fist pane, (Summary), you will see the AppleId (Account Name) that was used to buy the song.
Be sure to login to use this account to register this computer to play the song
What I often see, Is that people have many different AppleID, sometime not even knowing it, which is a big problem.

Thumbnails are not displayed correctly in Firefox, but displayed correctly in Safari and G. Chrome

Firefox display problems regarding this customers site:
http://gardenia.dk/collections/collection/
Thumbnails are not displayed correctly in Firefox - only a tiny bit of the picture is visible, incorrect scale (displayed correctly in Safari and Google Chrome).
Can I do anything to make it work in Firefox, too?
Kind regards,
Annette

This article might help you-
https://support.mozilla.org/en-US/kb/websites-look-wrong-or-appear-differently

My iMac is printing duplexed documents on a wirelessly connected Epson printer extremely slowly (minutes), but prints fast from and IOS device using AirPrint. Settings don't offer any help. Can anyone advise, please?

I have a one-year old (intel) iMac, now running on Mountain Lion. I have a wireless network with an Epson Photo Stylus PX830FWD printer which has an auto-duplexer. My problem is that when I print a two-sided document, the print takes minutes rather than seconds. It prints at normal speed if I use the print facility on my iPad or iPhone (AirPrint), which suggests that the Mac settings are at fault. I have been through all the settings on System Preferences that I can find, but nothing makes any difference.
I didn't notice it prining at slow speed on Snow Leopard or Lion OSX!
Any suggestions, please?

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Iphoto printing - preview is landscape, but prints out portrait

This is a recurring issue when I print photos. The preview shows a landscape oriented picture, but it prints in portrait orientation. How do I correct this?
The settings for the current photo are as listed:
Brother MCF-J425W
US Letter
Color
Aspect Ratio: Custom
Photo Size: 4.8 x 6.8
iPhoto 9.6
OX S Yosemite

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try printing again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

LOGO is not printing correctly in Production but printing correctly in Qual

Similar Messages

Maybe you are looking for