Long delay while loading a slide with a movie

As in the topic. I use Keynote08 and have 40 sec movie in the slide. It takes about 30 seconds to load this slide, during this time nothing happens. I tried nearly all combination of formats/codecs, nothing works. This is a wonderful software, but I cant use Keynote for presentations while the public has to wait until the next slide loads.
Any ideas...? Thanks in advance.

Sorry, my mistake There was some element on the slide, which was copied from another place and had a 30s delay to appear... Well, you have to be careful always, Keynote is not so advanced yet to think for you

Similar Messages

  • When opening DIR files I get a long delay while Director "Builds True Type Fonts"

    Running 11.5 on a Mac OSX 10.6.8
    When opening DIR files I get a long delay while Director "Builds True Type Fonts"
    Anyone know how to work around this?
    I've got all the fonts in my library and embedded in Director.  (Do I need to dump them from my DIR? Dump and reinstall?)

    Two bits of advice:
    1) Pare down your code to no more than 30-50 lines. Enough to compile and show the problem, but not so much as to make our eyes bleed, and for no one to want to read your post or help you.
    2) You would be wise not to state that your problem is "urgent". Even if it is urgent to you, realize that it is not urgent to us. Many here take offense to this as it implies to them that a) the poster thinks that his post is more important than everyone else's, and b) that the poster wants to put pressure on the volunteers who come here to help on their own free time. Just a friendly word of advice.
    I'll be happy to help when you've posted a reasonable amount of code. Good luck!

  • Web pages taking a very long time to load; nothing wrong with my internet connection.

    I've contacted my ISP and they've told me there is nothing wrong on their end and that my modem is running perfectly. I've done a speed test and my upload is 33mbps+ and download is 5.5mbps+.
    The problem is, it takes webpages a very long time to load. Sometimes longer than others, but sometimes it's so long I give up. There doesn't seem to be a difference between when I type in a URL or an IP address directly into the address bar.
    One night last week I completely lost the ability to connect to any webpages, and then when I woke up in the morning I was having these problems with connection speed, and the problem has persisted for several days.

    Hello Billyeee,
    Thank you for the details of the issue you are experiencing with Wi-Fi on your MacBook Pro.  I would be concerned about this too.
    I recommend following the steps in the section titled "Symptom: The Wi-Fi network seems slow" in the following article to resolve an issue like the one you described:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Thank you for posting in the Apple Support Community.
    Best,
    Sheila M.

  • Long delay when loading shell

    we have 2 test servers here we are using for one of our clients. In theory, both are configured the same, but we are experiencing a long delay (2 or 3 minutes) when login on to the machine.
    We get the delay when the shell is attempting to load. We get this issue if we login via ssh or if we do su - difuser.
    su difuser does not cause the delay.
    I've read about commenting out /usr/sbin/quota in /etc/profile, but that's not really an option for us.

    We found the issue and why un-commenting quota fixed it.
    We had a dead NFS mount. When the quota engin tried to check the quota on it, it would take forever to fail.

  • Long Delay in Loading Menulets on Startup

    Hi all! I recently installed Snow Leopard on my Macbook, and it's great, except for one problem. Whenever I boot up my Mac, everything loads except the Menulets (battery icon, date/time, airport, bluetooth, and most importantly, Spotlight). I use Spotlight a lot, and not having it working on bootup is a real pain. If I hold my curser over the Spotlight magnifying glass, I get the pinwheel, and none of the other menulets are showing. After about a minute, they all load, but this isn't something that should be happening. Apple doesn't have any updates for SL, and I'm at a loss. Any suggestions?

    First thing comes to mind is whether you had any third party menus installed. My understanding is they aren't supported and are hacks, so you'd want to uninstall them and see if that helps. If that helps, then you should definitely refer to the developers page of those menus to see if they are supporting 10.6 to make their menus work. Or do without.
    Of course, any software you have installed should be researched for compatibility before upgrading the OS. So, if there's any other apps or additions you've installed, it would be a good idea to do that research to prevent any further unforeseen problems, or at least learn what the expected problems will be.
    The other thing that comes to mind is that I experience something similar every so often, but not very often. Might just be the occasional fluke or self maintenance.
    If you have a lot of menus, that would mean a lot to load. And if any of those menus have to do anything besides sit there and look pretty, then that can eat up some time. I think the Script menu used to be like that if you put in a lot of folders, or an alias to a folder with tons of subfolders. Something else to think about, since they aren't just a list of words but are like little applications launching and waiting for response. Too many, too long.

  • String literal too long error while invoking a package with clob variable

    I have a package.One of the input variables of the procedure in packae is clob.
    I want to invoke this package with a huge clob as input.
    when i invoke this package like that i am getting following error
    PLS-00172 string literal too long
    can't we pass clob(huge clob) as input .is there any solution for that ?
    Thanks
    Pramod Garre

    842802 wrote:
    If insert this data into a table , from sql prompt still i get the same error.Do you mean SQL*Plus? Then there is buffer limitation and it is better to split literal into, let say 1000 character chunks:
    SQL*Plus: Release 10.2.0.4.0 - Production on Tue Mar 29 16:17:26 2011
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> select 'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA' ||
      2  'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA' ||
      3  'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA' ||
      4  'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA' ||
      5  'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA'
      6  from dual;
    from dual
    ERROR at line 6:
    ORA-01489: result of string concatenation is too long
    SQL> select to_clob('AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA') ||
      2  'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA' ||
      3  'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA' ||
      4  'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA' ||
      5  'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA'
      6  from dual;
    TO_CLOB('AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    SQL> SY.

  • Error while loading .sim file with sap tutor 2.2

    Dear Gurus,
    I had recorded a tutorial which is am attempting to edit now.
    On opening the tutorial through the editor, I get the following message:
    "The following error occured while opening the file:
    error loading archive: no valid header or TOC found (80040002)"
    I am able to edit other tutorials satisfactorily.
    I seek guidance in resolving the error and opening the tutorial.
    Note: I downloaded SAP Tutor from SWDC.
    Regards,
    Ajay

    I was using the SAP Personal Player to play the tutorials. After I installed the licenced version from service.sap.com, I was able to open the .sim files.
    Thanks!

  • Error While loading the data with OLIBW7

    Hi Guys,
      while we are loading the set up tables we are getting the following error in OLIBW7 transaction "Error determining rate: foreign curr. MYR local curr. PHP date 23.02.2007"
    I asked around the functional consultants and they informed that Currency Exchange Rate is not being loaded to D53 at all.
    Can any one let me know how to fix this problem....
    Thanks in advance

    Hi
    did you get the solution for the issue you got while doing the setup for Sales orders.
    "Error determining rate: foreign curr. MYR local curr. PHP date 23.02.2007"
    thanks in advance,
    Bhaskar.

  • Invalid number while loading a number with a coma as a group separator

    Hi,
    I'm loading a file in which I have numbers such as -9,999.99. The point is for decimal and the coma for the group separator (thousands).
    I did an alter session with a set to NLS_NUMERIC_CHARACTERS=".,"
    I have no errors with numbers such as -999.99 but as soon as I have a number with a thousand such 1,789.44 I got an invalid number error ??
    By the way when I tried to do the SQL statement directly, I also got the error
    SQL> select to_number('1,789.55','S999G999D99','NLS_NUMERIC_CHARACTERS=".,"') from dual;
    select to_number('1,789.55','S999G999D99','NLS_NUMERIC_CHARACTERS=".,"') from dual
    ERREUR à la ligne 1 :
    ORA-01722: Nombre non valide
    What am I missing ? What should I do to avoid the error ?
    Thxs in advance for your help.
    Rgds
    Yves

    Look carefully onto your format mask - it begins with 'S'.
    Format Model
    S
    Returns negative value with a leading minus sign (-).
    Returns positive value with a leading plus sign (+).
    Returns negative value with a trailing minus sign (-).
    Returns positive value with a trailing plus sign (+).
    Restriction: The S format element can appear only in the first or last position of a number format model.
    SQL> select to_number('+1,789.55','S999G999D99','NLS_NUMERIC_CHARACTERS=''.,''') from dual
      2  /
    TO_NUMBER('+1,789.55','S999G999D99','NLS_NUMERIC_CHARACTERS=''.,''')
                                                                 1789.55
    SQL> select to_number('1,789.55','999G999D99','NLS_NUMERIC_CHARACTERS=''.,''') from dual
      2  /
    TO_NUMBER('1,789.55','999G999D99','NLS_NUMERIC_CHARACTERS=''.,''')
                                                               1789.55Rgds.

  • Time delay while printing PO Report with "watermark"

    Hi XMLP Gurus,
    I have to again resort to you guys for help. Hope I will find it.
    I have added a watermark to the PO Report RTF template and it is taking too much time (almost 3 mins) to print the output. With out a print option the report is running normally, but when I select the print option it is taking that much time.
    If I take out the watermark and print the output it is taking normal time to print.
    Any idea what's going on?
    Thanks in advance

    Nobody to help on this !!!!!!!

  • HELP-HELP-HELP Desktop Manager Crashes while loaded or connected with BB

    Hi All... Please Help me out....!!!! I have recently purchased a BB 8310 Curve from Vodafone. From very 1st day, it could not be connected in my laptop with Desktop Manager supplied with the package CD. I have downloaded the latest version of BB Desktop Manager from the site, but it seems to be worst than before, it crashes before connecting the BB in USB port. Desktop Manager crashes every time, when the BB is connected : This shows an error message Box "BlackBerry Desktop manager has encountered a problem and needs to close" The error signature is shown from mshtml.dll file.

    Hello and Welcome to the Forums!
    sheberry wrote:
    I am so frustrated. I'm just an everage old person and I cannot get straight information from your manuals, virtual help, these forums - whatever.  It seems to me what I want to do is pretty simple, yet my brain is busting trying to figure it out and read all this junk!!! Sorry for the rant.
    Just to set your expecations correctly...based on the above highlighted text, you need to be aware that these forums are a user-to-user support channel, not a user-to/from-RIM conduit.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Keynote freezes playing slide with QT movie

    Hello there
    I have a Keynote presentation of slides, one of which is a short Quicktime movie. The whole presentation is set to advance each slide automatically, and play the QT movie automatically too. I need the presentation to loop, and it plays through once no problem, but when it gets to the QT movie for the second time, it freezes just after it starts to play it. I've tried exporting the movie in different formats with no luck. It happens whether i've got the Mac hooked up to a second monitor or not.
    It's running on a MBP 2.5GHz Intel C2D with 4GB RAM, on OSX 10.6.8. Keynote version 5.1.1
    Any help or advice would be gratefully received.

    Hey Gary,
    Thanks for this. I'd checked that the transition delay on the slide was longer than the movie itself. Deleting the whole slide and importing the QT movie again worked, thank you very much!
    I've also had an email from the iWork team asking me to send them the file, so i'll send them it to see what they make of it. There must have been something on the slide itself, as even importing a completely different movie brought the same problem.
    Cheers :-)

  • Get spinning beachball whenever I click on slide with attached movie-help!

    Running 10.4.11 and Keynote 3.02 on a mini with 1GB RAM
    I converted an earlier presentation (using Keynote in iWorks '05) to the iWorks '06 app, and it seemed like it went okay. Editing text is fine. No problems.
    However, if I click on any slide that has a video attached I get the spinning beachball. The only way out is to force quit. I've repeated this scenario now four times, so it's no fluke. It ran fine in '05 but I had to upgrade for Tiger...so it's not an option to go backward.
    Any idea what is happening, and is there any way around it? This presentation has to be made in about 10 days.
    Thanks for any help.

    If you drag the video from the document to the desktop, is the video playable in QuickTime on the desktop?

  • Safari slower than Firefox - especially on 2 finger scrolls while loading..

    When I surf the web on my air I notice that Safari loads a page and will not let me 2 finger scroll until it has loaded enough or has the flash or java app all the way in... while Firefox will load a page faster and allow me to 2 finger scroll while its loading.... I notice this on pages that have flash banners or stuff on them... at first I thought it was the air being to slow so I tried firefox on the same pages and they load quicker and always allow me to 2 finger scroll..... Anyone else notice this ? I prefer to use Safari but I cant stand the stalling it does while loading certain pages with banner ads or too much flash/java...
    Basically until Safari's blue bar is gone you'll get 2 finger scroll stopage while Firefox will scroll... is firefox more optimized or something... ?

    Running OS 10.6.7 plus last Firefox before 4.0. Reluctant to move to 4.0 as it is still new.
    This is a new problem, beginning in the last month or so for me, I think. While it seems much longer, I believe the delay is about 20 seconds, and it does happen every time Firefox launches.
    Further, sometimes (do not yet see a pattern) well after launch, when attempting to navigate on a website...Firefox isn't paying attention. I think the interruption may be 20 seconds here, as well. Then all is well.
    No magic living color pinwheel displayed by uncle Mac during either delay.
    Did I mention table pounding frustration when on deadline?

  • Integration Error in ODI while loading data to HFM application

    Hello All,
    I am performing a integration from source(Flat file) i.e example.csv  to classic HFM application I have created an Integration and while loading the data with the all options provided, and if you see these Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory,which is getting as error as properties are not set
    these properties are(as a options) is given in the IKM SQL to Hyperion Financial MetaData, but here I am using IKM SQL to Financial Management Data.
    I get the following error:-
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (most recent call last):
      File "<string>", line 3, in <module>
        at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
    com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
        at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
        at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
        at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
        at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
        at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
        at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
        at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
        at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
        at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
        at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
        at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
        at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
        at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
        at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
        at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
        at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
        at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
        at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
        at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
        at java.lang.Thread.run(Thread.java:662)
    Caused by: Traceback (most recent call last):
      File "<string>", line 3, in <module>
        at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
    com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
        at org.python.core.PyException.fillInStackTrace(PyException.java:70)
        at java.lang.Throwable.<init>(Throwable.java:181)
        at java.lang.Exception.<init>(Exception.java:29)
        at java.lang.RuntimeException.<init>(RuntimeException.java:32)
        at org.python.core.PyException.<init>(PyException.java:46)
        at org.python.core.PyException.<init>(PyException.java:43)
        at org.python.core.Py.JavaError(Py.java:455)
        at org.python.core.Py.JavaError(Py.java:448)
        at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
        at org.python.core.PyObject.__call__(PyObject.java:355)
        at org.python.core.PyMethod.__call__(PyMethod.java:215)
        at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
        at org.python.core.PyMethod.__call__(PyMethod.java:206)
        at org.python.core.PyObject.__call__(PyObject.java:397)
        at org.python.core.PyObject.__call__(PyObject.java:401)
        at org.python.pycode._pyx15.f$0(<string>:6)
        at org.python.pycode._pyx15.call_function(<string>)
        at org.python.core.PyTableCode.call(PyTableCode.java:165)
        at org.python.core.PyCode.call(PyCode.java:18)
        at org.python.core.Py.runCode(Py.java:1204)
        at org.python.core.Py.exec(Py.java:1248)
        at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
        at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
        ... 19 more
    Caused by: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
        at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
        ... 33 more
    Caused by: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
        at com.hyperion.odi.hfm.ODIHFMUtil.validateRequiredProperties(ODIHFMUtil.java:87)
        at com.hyperion.odi.hfm.ODIHFMMetadataLoader$OptionsMetadataLoad.validate(ODIHFMMetadataLoader.java:66)
        at com.hyperion.odi.hfm.ODIHFMMetadataLoader.validateOptions(ODIHFMMetadataLoader.java:188)
        at com.hyperion.odi.hfm.ODIHFMAppStatement.validateLoadOptions(ODIHFMAppStatement.java:168)
        at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:195)
        ... 38 more

    Hi Ujjwal,
    I remember Pratik had same issues and he resolved it.
    Re: ODI Error while loading data to Classic HFM Application
    Hope that fix your issue.
    Bhabani

Maybe you are looking for

  • Hyperlinks don't realize they're cropped

    I've set up a publication in InDesign in printer spreads (pages 12/1 then 2/11, then 10/3, etc.) When I create a PDF, I crop off the left half of odd-number pages and right half of even-numbered pages, so it can be viewed one-page-at-a-time. Problem

  • Error AR Invoice add"Reconciliation difference must be zero before recon

    Dear Expert, We have smoothly process  with out error  @ SAP B1 8.8 PL 14.  But When we upgrade to SAP B1 8.81 PL 09 we are facing error. The process is 1    A/R down payment request (independent), as payment is being received in advance (earlier tha

  • Iphone problem with itunes error 1603 on restore

    I allowed my iphone battery to fully discharge and upon recharging got the error message with a large exclamation mark "please connect to itunes". When I connected to itunes I was told that the phone was in recovery mode and needed to be reloaded. It

  • Concatenate fields using commas

    How do I concatenate fields using proper English separators? I'm using Acrobat Pro X. I have fields named Field1, Field2, Field3, Field4 and Result. Example 1 In Field1, I enter Apples. In Field2, Oranges. The other two fields are empty (Null). In th

  • Weblogic Admin Authentication

    I want to write an application which will be authenticated by weblogic for the same login as the admin login console. Is that possible, how can I do it?