Long-Term Planning (PP-MP-LTP)

Do you know BI content for Long-Term Planning (PP-MP-LTP)?

Not that I know.
Often business people actually mean SOP (BC: 0SOP_PLANNING) when talking about long-term planning. I don't see any point in reporting LTP that is more like alternative MRP scenarios. It is operational and different scenarios easily get confusing in reporting.
BR,Tuomas

Similar Messages

Extracting LTP (Long Term Planning) Data from SAP ECC to SAP BW

Hello all
Here is the task in hand. There is a standard report that Production Planners execute post their MRP/LTP runs. This report can be accessed through T-code "MCB)". The program in action is RMCB1200. I tried looking for any standard extractors but to no avail. I would be fine to know either or both of the following:
An extractor
All the primary tables involved ( I have found a few tables through the program but a list by some expert will help me understand that I have not missed anything significant)
Also, if anyone has done this before, how was your experience with the extraction in terms of extraction volume and performance.
Regards
Gajendra

After further digging, here is some information that I found out.
T-code
Program
BADI
MSEX
RMDMRPEXTRACT02
MD_SR_LIST_EXTRACT
This could possibly provide the data required. The program can be scheduled and the output can be managed by SPRO settings for Extraction Mode. I am running tests to confirm if it provides me the correct information and matches with MCB) output.
Here are some tables, just for reference:
LTP Tables: PLSC, PBHI, PLPT, MDTP, PLPR, PLPB
MRP Records:
MDKP
MRP Document Header Data
MDTB
MRP Table Structure (no data)
PLSC
Planning Scenario (Long-term Planning)
MDFD
MRP Firming Dates
MDVM
Planning File Entries
S094
LIS -- Stock/Requirements Analysis

Excluding storage location from MRP run in Long Term Planning

Hi,friends,
In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
Regards
Joey

Hi,
Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
==========================================================================
Symptom
In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
The storage locations excluded by MRP or planned separately are also planned in the plant segment.
Additional key words
LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
Cause and prerequisites
The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
The long-term planning occurs exclusively at plant level.
Solution
This is no error. The system works as intended.
The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
==========================================================================
Regards,
Siva

How to consider the Purchase Orders in Long Term Planning

Hi All,
I wanted to include the Purchase Orders of Finished Material in Long Term Planning.
I have selected the check box "Long-term planning: include firmed issues and receipts" in the Planning Scenario but after LTP run system is not considering the Purchase Orders of Finished Materials for Planning.
Regards,
Shailendra
Edited by: Shailendra Hadkar on Apr 5, 2010 12:41 PM

Dear,
Could you please explain usage of purchase orders for Finished product?
Regards,
SAP CONS

Implementing Long-Term Planning

Dear Guys,
Is that possible to implement Long-Term Planning (LTP) in SAP when there is no SOP module in the system. Would you please inform me the basic requirements or basic setup to implement LTP in SAP system.
Thank you in advance!

Hi Payam,
This is always recommended to implement LTP if you have long lead times for some procured parts, bottle necks in capacities for work centers and most important to plan about budget required for the production of those parts.
The above things you cannot check with STP/MTP and perform changes after the STP/MTP runs. But this you can do with LTP with diffrent scenarios and compare it till you satisfy.
You can do the precosting of the parts and check what would be your future costing and plant budget.
You can transfer the requireemnst of the critical parts to vendors well in advance after LTP run and before running the actual planning for the entire year, so the vendors will be well prepared to supply you the parts.
You can also checks the capacities required for the production before the STP run.
If this is OK then please close this thread.
Regards
TAJUDIN

Long term planning in ECC for materials planned in SAP APO

Hi SAP PP and APO Experts,
I would like to know whether it is possible to plan a material in SAP ECC with Long Term Planning to create Simulative Planned Orders in ECC, when the MRP Type for the material is set to X0 (Planning in SAP APO).
Warm regards,
Prem

Hi Dhaivakumar,
Appreciate your prompt response.
My business is MTS. I have made all settings for LTP planning for the material. (M|RP Type is set to X0-Planning in APO). When I execute the transaction MS02, I get the error message "Material 5200000013 J310 is not planned automatically. Message no. 61008". The details of the error message is:
The material 5200000013 in plant J310 or in MRP area is not included in automatic MRP because
either the MRP data for plant J310 or MRP area has not been created
or an MRP type has been entered for the material in plant J310 or MRP area that does not allow automatic MRP.
Warm regards,
Prem

I can't see planned order in Long Term Planning Stock/requirements list.

Hi
I am trying to use Long Term Planning in SAP.
I created scenario dates from 01.03.2011 to 03.09.2011. Between those dates i entered planned independent requirements as 300.
When i went to Long Term Planning Stock/requirements list, i can see all planned independent requirements but i run Multilevel single-item planning and then when i went to Long Term Planning Stock/requirements list again, i couldnt see planned order for planned independent requirements.
So what is the problem? Can anyone help me please?
Thank you.

HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM

Re: Long term Planning

Dear All,
I am trying to do Long term Planning. In my case I am not using SOP. Demand is entered into SAP through PIR (i.e. PIR).
I want to see how much load is there on all the resources available.
Please advice me how to proceed in this direction.
Regards,
Vivek Sharma

Dear Vivek,
Check with these steps,
1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
configuration settings has to be made in OPU5 for the planned orders for LTP.
2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
kindly remove the tick mark against version- active check box.
3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
entered or created,the same can be checked using MS21.
4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
planned orders obtained in MS04 T code.
5.These Simulated planned orders can't be converted into production orders or it cant be used for any
business confirmation purpose.
6. For capacity planning analysis,use T Code CM38,
Before that Ensure for all the work centers in CR03 which are used for operation under capacity header
you have included the check box for Long term planning,otherwise in CM38 you can't see any capacity
requirements data.
7.Before executing CM38,ensure under settings---> general you are giving the period settings properly.
Revert back incase of any more clarifications required.
Regards
Mangalraj.S

Datasources for Long term Planning

Hi Guys,
Our client is planning to implement Production Planning - Long term planning for next release. I did enough searching to find out different SAP delivered Data sources and different tables that are involved in LTP but was unsuccesful. Can anybody guide me by providing the list of datasources and tables.
Thank you,
Regards,
Vamsi.

Hi Vamsi,
This blog will give all list of all Infocubes, Infosources and Datasources which are relted to Production Planning.
http://help.sap.com/saphelp_nw70/helpdata/EN/12/c770376ec62c7ee10000009b38f8cf/frameset.htm
Hope it helps you
Nagaraju.V

Query on Long Term Planning (MS31)

During the creation of long term planning the following steps i followed before i am stuck at one point.
1)T code MS31
2)Planning Scenarion and detail
3)Long term Planning Radio Button selection
4)Planning period +Use Gross Lot Size (EX)
5)BOM Selection ID 01
6)Tab Planned Independent requirement details filled
Now in Plant TAB when i give my plant id the message is REQUIREMENT PLANNING IS NOT ACTIVE FOR MY PLANT CODE.
Message no. 61139
Please tell me how to make it active.
Thanks in advance
Rupesh Jha

Dear Rupesh,
Plz Refer to Mr. Mangalraj inputs on LTP
1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
configuration settings has to be made in OPU5 for the planned orders for LTP.
2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
kindly remove the tick mark against version- active check box.
3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
entered or created,the same can be checked using MS21.
4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
planned orders obtained in MS04 T code.
5.These Simulated planned orders can't be converted into production orders or it cant be used for any
business confirmation purpose.
6. For capacity planning analysis,use T Code CM38,
Before that Ensure for all the work centers in CR03 which are used for operation under capacity header
you have included the check box for Long term planning,otherwise in CM38 you can't see any capacity
requirements data.
7.Before executing CM38,ensure under settings---> general you are giving the period settings properly.
Revert back incase of any more clarifications required.
Regards
kumar

T399D - Long-term planning allowed for a plant

Hi gurus,
I was checking the table T399D and it has the "Long-term planning allowed for a plant" field (T399D-SIMPL), but, I do not know where I can customise this!
I was checking OMI8 and OPPQ (Parameters for DS section) transactions, but, I cannot find this field.
Could you help me in order to know where I can customise this?
Kind regards,
Sandra

Hi Sandra,
As it is correctly said that there is not much configuration required to Run LTP, but what you basically need to maintain/configure is as follows-
To carry out an annual planning or a rolling quarterly planning run you require information on the
future stock and requirements situation. This means you need to know how sales and operations
planning influence resources(conceptually)-
In long-term planning you can also plan materials that usually require very little planning in
operative planning, such as, materials planned using reorder point planning, bulk material, and
materials planned using KANBAN. In long-term planning, you can plan these materials as you
would MRP materials. This provides you with an overview of how these materials influence the
demand program.
The materials you want to plan in long-term planning must have already been planned in
operative MRP.Apart from above conceptual knowledge what else you require to configure /maintain is-
Planning Scenario(If you are running wity reference to it)-MS31
And run it through MS02(with reference to planning scenario) where you have to put mandatory MRP Control Parameters according to your business process eg.Processing key,create MRP list,planning mode,scheduling,firming planned orders.
Hope it fulfils your purpose at some extent.
Regards
Chandra

Use Reorder Point Planning and see VSE Requirements in Long Term Planning

Hello,
I would like to use reorder point planning short term and something similar to MRP planning long term. I am trying to drive actual production off of consumption and plan long term for capacity, inventory and BOM components. Our plan is to delete the near term forecast and leave the long term forecast in to show requirements for LTP.
I'm configured for Reorder Point Planning as follows:
MRP type V1, Reorder Point Planning with External Requirements
Planning Strategy 52
HB Max Stock Level
For the longer term forecast requirements I'm configured with:
Independent Requirement Type VSE, Planning without final assembly. This is creating non convertible planned order independent requirements.
The reorder point planning is executing perfectly, but how do I get the VSE planned order independent requirements to show up in long term capacity and inventory planning? What am I missing? Is it something with MRP type, am I missing an option in the long term planning setup?
This has been a tough issue and I would greatly appreciate any advice on this.
Thank you,
Wes
Edited by: weslaney on Jul 21, 2009 11:40 PM

HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM

Long term Planning in SAP

Hi Gurus,
I am new to SAP,this my 1st query in SDN.
I have been given sales figures of last 5 years of particular organization and i have been told to create a long term planning report in SAP please tell me the detailed methodology of create a long plan for the next 6 months in SAP.
Regards
Krish

Dear Krish,
LTP is a planning tool,where simulated planned orders's are obtained for an inactive plan.
It will be more helpful from production perspective.
To carry out an annual planning or a rolling quarterly planning run you require information on the future stock and requirements
situation. This means you need to know how sales and operations planning influence resources. That is, whether the results
of sales planning can actually be produced with capacity on hand. If such information is available it is possible to decide at an
early date whether extra work centers will be required to cope with bottlenecks, or whether additional machinery will have to
be purchased to reach the sales target.
Steps for LTP:
1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
configuration settings has to be made in OPU5 for the planned orders for LTP.
2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
kindly remove the tick mark against version- active check box.
3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
entered or created,the same can be checked using MS21.
4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
planned orders obtained in MS04 T code.
5.These Simulated planned orders can't be converted into production orders or it cant be used for any
business confirmation purpose.
6. For capacity planning analysis,use T Code CM38,
Before that Ensure for all the work centers in CR03 which are used for operation under capacity header
you have included the check box for Long term planning,otherwise in CM38 you can't see any capacity requirements data.
7.Before executing CM38,ensure under settings---> general you are giving the period settings properly.
8.Use T Code KSPP to transfer the planned activity requirements for production.
Revert back incase of any more clarifications required.
Regards
Mangalraj.S

Long term Planning -PP

Hi Gurus,
Can any one explaine me the config step by step of creating long term planning. I am using APO DP PIR in SAP ECC and trying to generate Long term planning.
It will be really great if ayone can help me in step-by step.
Thanks & Regards,
kumar

HI
These are the main steps for LTP:
1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
configuration settings has to be made in OPU5 for the planned orders for LTP.
2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
kindly remove the tick mark against version- active check box.
3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
entered or created,the same can be checked using MS21.
4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
planned orders obtained in MS04 T code.
5.These Simulated planned orders can't be converted into production orders or it cant be used for any
business confirmation purpose.
6 For capacity planning analysis check T code CM38
Regards
Anupam Sharma

Long Term Planning : Requirements from "Consumption based planning" missing

Hello,
I'm trying to use long term planning ( MSBT,MS01..) for simulation. In the scenario I've set up I want to have all actual requrements and orders as well as fixed orders.
The problem is that requirements(=forecast) for materials with consumption based planning ( MRP type =VV ) are not transferred from the operative planning. How can this be achieved ?
Best Regards
Bernt

Hi,
Hard to say... have you looked in the details of the VV MRP setting, your LTP scenario, or your copy transaction in case there is some parameter about this?
In case you are looking for information about this process, here is a good document with a detailed description of the Long-Term Planning Process in SAP (with detailed T-codes as well): http://expertplug.com/materials/training/long-term-planning-in-sap
You have a preview and a detailed description to see if it suits your needs.
Cheers
Matthieu

Long-Term Planning (PP-MP-LTP)

Similar Messages

Maybe you are looking for