Looking for good tool to report on unused Mailboxes, unused Distribution Groups, and unused Public Folders

I have evaluated the following products.
Quest (Dell) MessageStats
Enow
StealthAudit
StealthAudit looked to be the best as they also group like mailboxes with like permissions for Office 365 migrations, but this was by far the most expensive.
We are looking to clean up our environment to eventually migrate to Office 365. Any advice on a product that would report on unused Mailboxes, unused Distribution Groups, and unused Public Folders that would be great.
d

Hi,
In your case, you can use the following cmdlet to determine unused mailboxes. If a mailbox has never logged on, the Lastlogontime is empty.
Get-Mailbox|Get-MailboxStatistics |fl DisplayName,Lastlogontime
Use the cmdlet below to get publicfolder's last access time.
Get-PublicFolderStatistics |fl name,LastAccessTime
Get all distribution lists used over last 30 days.
Get-MessageTrackingLog -EventId Expand -ResultSize Unlimited |Sort-Object RelatedRecipientAddress | Group-Object RelatedRecipientAddress |Sort-Object Name | Select-Object @{label=”PrimarySmtpAddress”;expression={$_.Name}}, Count
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Similar Messages

Looking for a tool to search text fields in about 1000 reports installed on Business Objects Xi R3

Hi,
i am looking for a tool, program that can search all our reports installed on Business Objects Xi R3 for specific content in text fields and formulas.
We used a couple of years ago .rpt inspector, that worked pretty well for our purpose.
Unfortunately this is Win XP & Win Server 2003 only, so we can't reuse it anymore.
(I know there are way of getting WinXP that in a VMware, but that is not an option in our company.)
So i am interested , if there is another tool out there, which can help us?
regards Alex
btw we are using Business Objects XI R3 (SP7) with reports deisgned on crystal reports designer 2008

Hi,
i am looking for a tool, program that can search all our reports installed on Business Objects Xi R3 for specific content in text fields and formulas.
We used a couple of years ago .rpt inspector, that worked pretty well for our purpose.
Unfortunately this is Win XP & Win Server 2003 only, so we can't reuse it anymore.
(I know there are way of getting WinXP that in a VMware, but that is not an option in our company.)
So i am interested , if there is another tool out there, which can help us?
regards Alex
btw we are using Business Objects XI R3 (SP7) with reports deisgned on crystal reports designer 2008

Looking for good easy to use inexpensive tuner

Hi,
I am looking for a good, easy to use, inexpensive tuner. Not one you use in a rack or on a pedal, but one you use on the computer. I looked and there are a ton out there so I figured I would look for recommendations here.
I do not like the way GBs works. It fluctuates too much as the note decays and drives me nuts. I want a simple one, that works great. (If it has a feature that helps in tuning a 12 string, than thats a plus, but not a deal breaker). Simple and accurate is most important.
Lastly I noticed some they sell are AU and some are stand alone. Is one better than the other?
Thanks,
Paul

Strangedogs,
Thanks for the link but if you read the review of it on the site, it is terrible. The users on VT hated it. It got 1 star out of 5. I was looking for a recommendation of one that someone has actually "used" themselves and likes it from experience using it.
There was a link that someone posted there for a free tuner from emagic that they said is great, but all the links I found with google run to a dead end unfortunately.
Paul
BTW: boy do those 12 strings take forever to tune. I was jamming with a friend over new years weekend and it took him forever to tune up, (and he has an excellent ear).

Looking for good orchestra plugins

Hi,
I am looking for good classical orchestra plugins (violins cellos etc...)
What are your suggestions ?
thanks

As soon as iS sees this, he'll chime in with his
faves...;)
My ears were burning.
I use bits and pieces from many different libraries. For me, there's no one library that has all the right textures, articulations, etc. for any one instrument.
I recently purchased the Kirk Hunter EXS24 library. Most of the brass, strings, and woodwinds are superb. The caveat here is that almost all samples were recorded in some kind of hall or soundstage, so as with other libraries that were sampled with ambience, it can sometimes be problematic if you're going after a dryer sound. Depending on the sound, careful tweaking of the release time can minimize that effect.
So yes, I endorse Kirk Hunter. Bang-for-buck quotient is great ($325).
GPO -- I use their woodwinds and harp, the occasional solo string sound, percussion (the xylophone and celeste are wonderful). But the strings are pathetic and the brass poor. Still, for $250 it's an astounding deal, and worth it for the woodwinds/harp alone. It's paid for itself 50x over.
A favorite for strings are Sonic Implants. My copy went through a Gigasampler -->EXS conversion and I love them to death.
EWQLSO are not a fave. I've heard good things about Gold though.
Vienna... I've never been impressed with any of their demos. Well crafted but flat and lifeless sounding. I think the fault is with the demos and not the actual samples. Anyway, a friend recently realized a part for me using some of their specialty brass sounds and it was exactly what the doctor ordered! One day I'll invest in VSL and add it to the arsenal.

I am looking for good pdf conversion program like omni pro 18

i am looking for good pdf conversion software, like omnipage pro 18 by nuance, it is only supported by windows, what is good?

What are you trying to convert the pdf to (MS word, text, what)?
Here's one for word: PDF Converter
Possibly another way for word: How to Convert PDF to Word Document on a Mac

Looking for a Tool

I am an IT consultant with a client that conducts a wide range of activities including research, education, marketing, and sales. There are a variety of legal, regulatory and ethical standards that apply to these activities. Our task is to design/develop a system that allows the monitoring and tracking of our compliance in each of these area.
I am looking for a tool that would allow me to design and develop the application quickly.
Thanks very much for your help,
Bruce Liang

Bruce,
There are several rapid application development (RAD) tools, most of which can be used to develop applications against an Oracle database. Oracle's offerings in this area are:
Designer: This is our premium application development tool, suitable for extremely large, complex projects
Developer: This applications development tool allows you to quickly create forms based applications.
JDeveloper: Allows you to create Java based applications.
The ramp-up time on the first tool might eliminate it from consideration (Designer has so many capabilities that we have an entire curriculum devoted to helping application developers get the most out of it). I've thrown together quick, relatively simple applications using Developer in a matter of hours, but you will find that any tool will be slow going at first until you get used to its environment.
Of the non-Oracle offerings, my favorite has to be Inprise's Delphi. Like Oracle's Developer, it takes a while to get used to the development environment but I haven't seen too many things I wanted to do that couldn't be done in Delphi.

Looking for good JSP editors??

Hi,
I am new to JSP but very old to ASP. I am looking for good JSP editors if there are any for free to dl.
Do we have any JSP editors...like in Microsoft which gives you dropdown list of parameters and properties.methods... ???
Thanks,
Kavans.

Sounds like your looking for a good IDE. As far as free ones
go, netbeans is as good as any. Comes with a lot of nice
features.. such as code completion, and has the latest version
of tomcat integrated.

Looking for good firewall/router solution

Hi.
Im setting up a network and im wondering wich type of device i should use. The question is if i should use a firewall and a layer 3 switch for inter VLAN routing or if i should use a router solution with built-in firewall (like zone-based) and just layer 2 switches.
Demands on the equipment:
NAT
Some QoS (dont really know on what level of complexity its going to demand, proberbly very low, just some form of QoS)
Firewall solution
Cost balancing or something between two Internet connections. So that traffic running on one can jump over i case of connection failing.
4 gigabit interfaces (RJ45 should work but if i can get better for reasonable price im going with it).
Hoping to get som input on this matter.
Regards Tommy Svensson

Tommy,
An ideal solution for what your looking for would be either the rv120, wrvs4400n, or Sa500 series router and possibly an SG300 series switch in layer 2 mode. This will allow the router to cover the vlan setup and intervlan routing if need be. The switch will allow you to configure qos and you can trust the qos coming into the router on the lan side.
The other option you could get gigibit router and put the sg300 series switch in layer 3 mode and let it handle the vlans and qos at that point. The only thing about this setup, any router that is gigibit we have will be able to facilitate vlans and inter-vlan routing.
Hope this gave you some ideas as to designing the network.

HELP, PLEASE.. I'm looking for a App that I can install on both my iPad and iPhone, then when I load a document, picture, or anything on that app on iPhone or iPad, it will Sync with the other Device so both devices will end up with the same file .

HELP, PLEASE.. I'm looking for a App that I can install on both my iPad and iPhone, then when I load a document, picture, or anything on that app on iPhone or iPad, it will Sync with the other Device so both devices will end up with the same file ...

iCloud Drive: https://www.apple.com/icloud/icloud-drive/
Dropbox: https://itunes.apple.com/us/app/dropbox/id327630330?mt=8
OneDrive: https://itunes.apple.com/us/app/onedrive-for-ios/id477537958?mt=8

I'm looking for an app that will allow me to upload my contracts and forms to my iPad, fill in a customer's personal information, sign them, save them and email them.

I'm looking for an app that will allow me to upload my contracts and forms to my iPad, fill in a customer's personal information, sign them, save them and email them. I looked at easySign, Filemaker, FM Touch, Sign Docs, Zosh, Exzact, Mi-Co

FormConnect (http://itunes.apple.com/us/app/formconnect/id432653695?mt=8&ls=1) can handle the filling out, signing, saving and emailing the contracts/forms but uploading the contract and the form is going to be a challenge because you’re dealing with paper documents that have to be scanned. If you can convert the scanned documents into an OCR program, you might be able to copy and paste the contract without having to retype it but the form itself is probably going to have to be recreated. Alternatively, you could use a document annotation program such as iAnnotate and mark up the contract with ink.

I am looking for a way to convert Microsoft Office files to my apple and back again

I am looking for a way to convert Microsoft Office files to my apple and vise vera.
<Re-Titled By Host>

you are asking about Microsoft products and using a laptop, not a workstation Mac Pro.
The Numbers and Pages Apple Communities. or MS Community if you want those.
Importing and Exporting, but Numbers and Pages will not do a SAVE into other formats by default, and therefore have to keep using Export which is messy.
Changing your own thread midstream may not be ['thread hijack'] but it is like having the rug pulled out by changing the subject on us.

I have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?

i have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?

korgba wrote:
it pops up a script were it says that the macbook cannot find a bluetooth keyboard, and it isnt a keyboard connected
For some reason, your Mac doesn't recognise that a keyboard is present, so it looks for a wireless keyboard. The question is, why doesn't your Mac recognise that a keyboard is attached?
First, you need to make sure you remove all peripherals, especially USB peripherals (the keyboard is on the USB bus). Then restart holding down the Shift key. This should boot in Safe mode. If the computer boots normally (not in safe mode) and the keyboard is still not working, try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>
If that still doesn't fix the problem, then the keyboard (or its controller) is probably damaged and needs to be replaced.

Looking for _synchronous_ call to report

Hello,
(Oracle 9iR2-902-EE)
I have the following sequence:
--plsql_batch1
--report1
--plsql_batch2
batch2 starts only after report completed.
I am aware of
--UT_HTTP package
--SRW package
--HOST procedure
Looks like all of possibilities are non-blocking
asynchronous calls. Some forum posts describe
checking on status (SRW package) in loop.
Is there some better solutions to call report
not from URL but more "natively" with better control
over end time and status (blocking mode).
Thank you in advance for any advice.
Alex V.

Hi,
In your case, you can use the following cmdlet to determine unused mailboxes. If a mailbox has never logged on, the Lastlogontime is empty.
Get-Mailbox|Get-MailboxStatistics |fl DisplayName,Lastlogontime
Use the cmdlet below to get publicfolder's last access time.
Get-PublicFolderStatistics |fl name,LastAccessTime
Get all distribution lists used over last 30 days.
Get-MessageTrackingLog -EventId Expand -ResultSize Unlimited |Sort-Object RelatedRecipientAddress | Group-Object RelatedRecipientAddress |Sort-Object Name | Select-Object @{label=”PrimarySmtpAddress”;expression={$_.Name}}, Count
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Looking for good algorithm to calculate a list of figures

Hello,
Given a list of figures:
1899.09
345.55
300.00
130.05
90023.00
45.90
120.50
8831781.56
505.00
45.55
Then the program need to find all the possible addition of figures that will able to produce a answer, for example, 550.55
Then the possible additions are:
300.00 + 120.50 + 130.05 = 550.55
505.00 + 45.55 = 550.55
any good algorithm or sample code?
Thanks for any help.

A general knapsack problem solver is overkill here if one just wants to find a combination that fits 'perfectly'. If the list of numbers is small (< 100), a simple exhaustive search will do fine (read: it's fast). Have a look at the following sample class that solves this particular problem. Note that the set of numbers is a set of integer numbers, because floating point numbers don't add up well; in particular large and small numbers added will result in very inaccurate sums.
kind regards,
public class Comb {
     private int   u; // index of used numbers sofar
     private int   s; // the sum to be found
     private int[] c; // the candidate numbers
        // given a set of numbers and a sum, instantiate a solver
     public Comb(int[] c, int s) {
          this.c= c;
          this.s= s;
          this.u= c.length;
        // yes, swap two elements in array c
     private void swap(int i, int j) {
          int t= c;
          c[i] = c[j];
          c[j] = t;
// use the number at index i as a try
     private void use(int i) {
          swap(i, --u);
// unuse the number at index i
     private void unuse(int i) {
          swap(i, u++);
// proccess (e.g. print) a current solution
// note that this method could throw an exception if
// just one solution is needed.
     private void solution() {
          for (int i= u; i < c.length; ++i) {
               System.out.print(c[i]);
               if (i < c.length-1)
                    System.out.print("+");
          System.out.println("="+s);
// find all solutions to this problem
     public void find(int t) {
          if (t == 0) // ready?
               solution();
          else if (t > 0) // still more to do?
               for (int i= 0; i < u; ++i) {
                    use(i);
                    find(t-c);
                    unuse(i);
// solve the example problem ... == 11
     public static void main(String[] args) {
          int c[]= { 5, 3, 6, 8 };
          int s = 11;
          new Comb(c, s).find(s);

Looking for Chapter Tool Beta or other app to create enhanced podcasts

Hi all. I am looking at creating enhanced podcasts. On Google I found a mysterious app that Apple has apperantly created - "Chapter Tool Beta". However, all links to this app are dead. Any idea what happened to that app?
Also, what are some alternatives? Garage Band doesn't work well, as in this project I am working on, we have to show a screen shot, then in the next "frame" same screen shot, but with a highlight box over an area. And, it's hard to line up images in GB. Any ideas? Thanks,

I think the Chapter Tool is now dead - though someone did ask about this a few weeks back: it might be worth searching for the thread to see whether anyone could help.
I would suggest you look at Podcast Maker: this will take your pre-existing mp3 files and add chapters and images to make an m4a 'enhanced podcast', and incorporate the information you give it into a feed file. It will then upload the podcast to your iDisk or other server and ping the iTunes Store for you. I've used it for three years now and found it very reliable.

Looking for good tool to report on unused Mailboxes, unused Distribution Groups, and unused Public Folders

Similar Messages

Maybe you are looking for