Looking for _synchronous_ call to report
Hello,
(Oracle 9iR2-902-EE)
I have the following sequence:
--plsql_batch1
--report1
--plsql_batch2
batch2 starts only after report completed.
I am aware of
--UT_HTTP package
--SRW package
--HOST procedure
Looks like all of possibilities are non-blocking
asynchronous calls. Some forum posts describe
checking on status (SRW package) in loop.
Is there some better solutions to call report
not from URL but more "natively" with better control
over end time and status (blocking mode).
Thank you in advance for any advice.
Alex V.
Hi,
In your case, you can use the following cmdlet to determine unused mailboxes. If a mailbox has never logged on, the Lastlogontime is empty.
Get-Mailbox|Get-MailboxStatistics |fl DisplayName,Lastlogontime
Use the cmdlet below to get publicfolder's last access time.
Get-PublicFolderStatistics |fl name,LastAccessTime
Get all distribution lists used over last 30 days.
Get-MessageTrackingLog -EventId Expand -ResultSize Unlimited |Sort-Object RelatedRecipientAddress | Group-Object RelatedRecipientAddress |Sort-Object Name | Select-Object @{label=”PrimarySmtpAddress”;expression={$_.Name}}, Count
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support
Similar Messages
-
Looking for Video call soluation
Dears ;
Good evening I want to know if there is a solution for video calls between 2 citys via VPN link if there is virtual solution or programs
Thanks all and sorry for bad English
Posted by WebUser Mohammadrios Hakawaty from Cisco Support Community AppHi ,
It is not clear what the specifications of your setup are supposed to look like . However could take a look at "
Cisco Virtualization Experience Media Engine" since you plan on having voice and video in a virtualized environment :
http://www.cisco.com/en/US/products/ps12862/index.html
Hope this helps!
Regards,
Karthik Sivaram -
Looking for a Cost Analysis report by material
Hi All, I'm looking for a report similar that the one you can see in MM03->Costing 2 view->"Actual" Button but for all materials not just one. Is there anything like that in SAP o do we need to depelop a new report?
Thanks in advance. Mauro.Hi,
Check t.code: MCRE
Also check report with t.code:KSB1 with selection of materials.
Regards,
Biju K -
Where to look for log files & crash reports to help debug lockups?
Where would I look for possible log files or crash information that may provide clues on what the problem is?
Three or four times in the past few days my system has became unresponsive requiring a power-cycle. The little prism-colored round-cursor appears. I can drag windows about with my BlueTooth mouse (but not the trackpad) and that's about. The Function keys are not responsive. Other times the UI may becomes totally unresponsive.
A couple of weeks ago I Carbon Copy cloned my hard drive to a new 500GB Hitachi 7200 RPM ( I have 200GB free space now ). Before upgrading, I do not recall having had this problem. It usually occurs when I am running a Linux Red Hat Enterprise Linux 5.2 VM under Parallels. Parallels may have nothing to do with it as that's what I do all day ( develop Linux software in a VM ).
I have a MacBook Pro 2.4Ghz, OS X 10.6.3.
Thanks in advance for any tips or suggestions,
-EdThis is a Mac OS X issue. I am not using Boot Camp or otherwise dual-booting. I am running Linux in a virtual machine under a Parallels Mac OS X host; in effect running Linux as an application under OS X.
Unfortunately I did not see any clues in either log file location. Thank you very much for explaining where to look. I ran Disk Utility and repaired a bunch of permissions. Perhaps I should have done this before and after making the Carbon Copy clone.
-Ed -
Looking for script - Quarantine policy reporting
I'm looking for a way(script or CLI) to gather percentage information for Quarantine policy's and dump it to a ".csv" or ".txt" file.
What I want is to collect the percentage of quarantined messages per policy.
Thanks for your help in advance,jgarry wrote:
[This one?|http://www.petefinnigan.com/find_all_privs.sql]
That would be the one!
Thanks. -
I have evaluated the following products.
Quest (Dell) MessageStats
Enow
StealthAudit
StealthAudit looked to be the best as they also group like mailboxes with like permissions for Office 365 migrations, but this was by far the most expensive.
We are looking to clean up our environment to eventually migrate to Office 365. Any advice on a product that would report on unused Mailboxes, unused Distribution Groups, and unused Public Folders that would be great.
dHi,
In your case, you can use the following cmdlet to determine unused mailboxes. If a mailbox has never logged on, the Lastlogontime is empty.
Get-Mailbox|Get-MailboxStatistics |fl DisplayName,Lastlogontime
Use the cmdlet below to get publicfolder's last access time.
Get-PublicFolderStatistics |fl name,LastAccessTime
Get all distribution lists used over last 30 days.
Get-MessageTrackingLog -EventId Expand -ResultSize Unlimited |Sort-Object RelatedRecipientAddress | Group-Object RelatedRecipientAddress |Sort-Object Name | Select-Object @{label=”PrimarySmtpAddress”;expression={$_.Name}}, Count
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
The first thing to look for in an AWR report
DB version:10gR2
Since AWR report contains a wealth of information, where should i start looking at first? Is it the Top 5 timed events?
Message was edited by:
james_pDB version:10gR2
Since AWR report contains a wealth of information,
where should i start looking at first? Is it the
Top 5 timed events?
Depends on why you are looking at the report. You might want to gander at When your query takes too long ... -
I am looking for Transaction Codes or Path to get these reports
1 List of customer returns
2 List of goods receipts
3 List of Post Goods Issues
4 List of goods shipped
5 List of adjustment made to inventory by date/person. (Document it)
6 Inventory aging report
Thank you very much for help in advanceHi Ashish,
MC+A SIS: Customer Returns, Selection
VL01N Customer Returns
VL02N Customer Returns
VL03N Customer Returns
MCP6 Goods Receipts
MB1A Goods issue
MIGO_GI Goods Issue (MIGO)
COWBHUWA Goods Issue for Work Order
MB90 Goods Issue Messages
VLLA Picking/Goods Issue
VL06G Goods Issue - Delivery
COGI Goods Issues
VLLA RWE: Picking/Goods Issue Analysis
VL06G Deliveries for Goods Issue
VL23 Goods Issue (Background)
Small Suggestion, use the tcode search_sap_menu to look for any tcode or report!
Hope it helps,
Thanks
Janani
award points if helpful -
Standard report for period end stock report
Hi all,
My client is looking for a SAP standard report for material.Their req is as follows.
Open Bal (Stock)
Add: Purchase/Production
Less: Sales/Consumption
Closing Bal(Stock)
I have sugegested them MC.9,MB51,etc....but they are not satified.
They are not willing to go for a 'Z' report too....
Can any one suggest me whether their is any function module or bapi or badi thro' which i can fullfill my clients req. or any other better alternative like report painter,set,etc which suit my requirement.
(can you please let me know from table i can get these datas......just for knowledge purpose)
hope that anybody will guide me...
We are in 6.0 version
God Bless
RegardsTry Standard Report MB5B once.
Regards,
Ashok -
Looking for Standard SAP report
Hello forum,
Can some one tell me if there is a standard SAP report that would compare or can be used to compare a delivery order with a sales order and show the changes made in terms of quantity? I am looking for the report name
Thanks in advance,
KHello,
Can some one tell me if there is a standard SAP report that would compare or can be
used to compare a delivery order with a sales order and show the changes made in
terms of quantity? I am looking for the report name
I think your requirement can't be met with standard functionality. The best way to for mapping this requirement would be to create a Custom Report involving two below things.
Use the program which is called when we access Sales Order --> Environment --> Changes.
Use the table for delivery item level LIPS for Quantity comparision.
Kindly try out this approach and let us know if any further issues comes into picture.
Regards,
Sarthak -
CUIC report for the Call transferred.
Hello,
I am looking for CUIC report for the number of calls transfered by an agent. Below is the query that works fine in SQL, but i am unable to generate a CUIC report on this.
select AgentPeripheralNumber,count(*) from t_Termination_Call_Detail where
where DateTime between '02 Aug 2013 00:00' and '18 Sep 2013 23:59'
and
ICRCallKey in (select ICRCallKeyParent from t_Termination_Call_Detail
where DateTime between '02 Aug 2013 00:00' and '18 Sep 2013 23:59'
and CED='2345')
group by AgentPeripheralNumber
Regards,
SandeepTry querying "Termination_Call_Detail" instead of "t_Termination_Call_Detail".
Check out the CallDetailReport.xml report available here:
http://developer.cisco.com/web/ccr/documentation
That should be a good starting point for you.
-Jameson -
UCCX - Can I get a report on hold time for one call
Hello, is it possible to report on the hold time for one particular call? We have a customer claiming they were on hold far longer than the agent claims. We are running UCCX 8.5, with CUCM 8.6.
Thanks,
JoshHi, it's probably the Agent Detail report you are looking for.
Also, take a look at the reporting guide for UCCX 8.5.
G. -
UCCX - Looking for Script to forward the call
attached
OK, then it's relatively easy. First, let's create CSQ's per site. For instance, there will be a CSQ named "SiteA", "SiteB", "SiteN" etc. Next, we can create a script that takes a look at the caller's ANI (you can easily get that information using the Get Call Contact Info step). Based the ANI, we will take a look at the number of the agents available at the preferred site (using the Get Reporting Stats step). If it's not 0, we can go and route the call. If it's 0, then we can get the number of the available agents at the next preferred site and again, the next preferred site, until we get a site with at least one available agent.
G. -
Looking for a good 3rd party reporting tool
I'm looking for a tool that I can use that will provide easy to read call detail reports that can be either PDF or Excel formatted. Quite often I get asked to pull reports for detailed call records of an extension for the last 3 months and it's a pain to run the query and then spend time in Excel to format it in such a way that another manager can understand it.
Anyone have any recommendations? Not looking for the high end, do it all type of software.
Thanks
JImhttp://www.isi-info.com/solutions/CiscoCallAccounting.htm
this is the software our vendor recommened to us, as the reporting tool built into Unity isnt that great
http://www.syn-apps.com/products/software/
Call-Reply might also be something you might b e intreasted in. -
Where to look for Reports ???
Hello Friends ,
I am a starter in Oracle Apps. I am a self-learner. Pls help me with the answer to the following questions, if you please.
Question 1:- If you are assigned the task of a modifying or customising a particular report in a Apps , in which folder/directory are you going to look for it ??
Question 2:- In Oracle Apps after modifying an existing Report where do you store/save it? After you modify an existing Report in Oracle Apps do you need to follow the usual procedure of registration in AOL like you do for a new report ??
Thanks,
Sujay G.Hi Aali;
Please check below notes which could be helpful for your issue:
Re: finding lists of reports
Regard
Helios
Maybe you are looking for
-
I my macbook pro will not recognize my iphone. I had the AppleStore, re-install my original software a month or two ago, but since they did this, my computer cannot recognize my Iphone it is telling me that I also need to download the new version o
-
I was heaving some troubles with my pictures looking like they were missing some colors so i preformed a self test diagnostic page and the light cyan and cyan blocks were both missing. the ink delivery system information part of the report gave no p
-
I ask about ibooks author app There is no way to can downlad it to my ipad or my pc because i don't have mac
-
Hi, I noticed when you select a send as pre fader in LPX it does not turn green anymore. I thought it was good before in LP9, so that you knew it was a pre fader and not post. Anyboby else found that? Thanks
-
Export iMovie 10.0.6 on to a DVD or external hard drive?
How do I export an iMovie from the iMovie (Yosemite 10.0.6 ) application onto a DVD or external hard drive?