Looking for part numbers for ESW-520-24 rack mount brackets

We have missplaced the two L-shaped brackets to mount our ESW-520-24 switch into a rack. Does anyone have part numbers for them?

Similar Messages

Support for WRT610N for ESW-520-24P-K9

Hi to whom may concern,
Can the following switches (ESW-520-24P-K9) x3 & ESW-520-48P-K9 able to support inline power for 74 x WRT610N ?
Thanks

Hello batumibatumi,
The ESW series does not have supported CLI feature. If you are looking for a CLI supported switch, please look into our Sx300 series.

Wall mount bracket for AIR-ANT5160V-R

Hi all,
I am looking for a wall mount bracket reference, for these 2 models of antennas :
- AIR-ANT5160V-R
- AIR-ANT2506
Something like that :
I was not able to find any reference in cisco product list. Does anyone have an idea ?
Thank you

Hi Scott,
Thanks for your reply.
The picture I am showing is an example of what I have seen.
I am going to deploy lots of wireless sites, that's why I am looking for a reference of wall mount bracket I could buy to deploy easily the outdoor antennas.
It seems this accessory is not part of Cisco's product list ?
Regards

Rail kit for S20 to rack mount

Does anybody knows a company/provider who has the rail kit that can be used on S20 workstation.
I am looking for some way to rack S20 and the best way would be using rail kit. I am not interested in the shelf mount.
Thanks

the S10/S20 chassis is much too narrow for a typical 4U or 6U rail kit. you'd need to use a 1U drawer.
i've never encountered a server farm that didn't allow upright server space outside of the racks. does the S20 absolutely have to be rack-mounted?
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Rrack mounting brackets for Cisco switch SF300-48P ?

Does anyone know how to get rack mounting brackets for Cisco switch SF300-48P ?

You might be able to get them through Cisco support. Check this thread: https://supportforums.cisco.com/discussion/11201291/sf-300-series-rack-mount-brackets

Dv7-4300el 2nd hd caddy+cabel - looking for part numbers

Hi all! I got an HP Pavilion dv7-4300el and I recently bought an SSD which I want to put into the laptop in bay 1 and move the other HDD to bay 2. In order to do this I need a new caddy and a new cable. I saw a lot of shops selling those in the US, but none in Europe. Since I would like to order it from Europe I need the exact part numbers to. Anyone has an advice?
Thanks,
Andrea

Hi:
Unfortunately, I don't know what to tell you, because the HP parts list doesn't even list that part number which you just bought, as the cable for the 2nd hard drive. There is only one service manual for all dv7 models. So that is not good if all the parts listed don't work in all of the dv7 notebooks!
The part number they do list was only good for the primary hard drive.
I would have assumed that one cable you bought would have worked in any dv7 notebook.
Have you contacted HP Support in Italy to ask someone what is the right part number for the 2nd hard drive cable needed for your specific notebook?
What is the part number listed on the bottom of your notebook?
You can enter that in the site below and it should give you a listing of all available parts for your notebook. Maybe the correct part for the second hard drive cable will be listed and it will be different than the one you bought.
http://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=F118D91B7A8D4FAD8DA94CF6217CD4B4
Paul

Looking for small part for HPw2207 monitor

Hello. I am looking for a small circuit board part for my HPw2207 monitor. After searching for solutions to a OSD Lockout problem, I found that pressing the Menu button for 10 seconds should stop it. However, the switch itself seemed stuck in the "on" position. So, as I am fairly adept at repairing things, I decided to open the monitor and see what the problem was. Well, I found it. After discovering how to remove the front and rear plastic bezel, down at the bottom of the monitor, where the Menu buttons are, there was a small circuit board housing and switch button assembly, that was all corroded. I removed it to look closer and what did I find?? It was CAT PEE!!! One of my wife's cat's must have sprayed the corner where these switches are, and as cat pee is very acidic, it had completely corroded the 3 pins on the circuit board connector, and froze up 3 of the 4 micro switches. So now, my only recourse to fix this is to order a new circuit board assembly. So......this is my question.
Are these parts still available, and if so, how do I order them. I do have some numbers from the circuit board itself, which is held in place with the button assembly by two small screws.
On the front side of the circuit board, there is a number, which may or may not be the complete assembly number or perhaps the circuit board number, but I'm not sure. Here it is.
7900771500000R
On the back side of the circuit board(green side) there was this number.
490481500600
I don't even need the entire assembly. Only the circuit board. I just purchased this monitor and can't afford another one.
I may be able to use the monitor withOUT the circuit board in place, if it will work. I'm going to reassemble it without it to check. But if this circuit board is available, I would sure like to get one so I have access to the Menu items. Since these monitors are still being sold(at Staples) I assume parts MUST be available, but from my experience in searching HP...well, I wouldn't doubt they arn't. But just in case...that's why I am posting this thread. Thanks for any help.
Oh...btw...the CAT is GONE now. History. Good riddance too. He pee'd on more than this monitor too. Ruined half a dozen things of mine and this was the last straw.
Thanks
Rick
This question was solved.
View Solution.

Hi Rick,
You might look on eBay for the part or Google the part number. HP considers monitors consumables so internal parts are not stocked.
I don't think an extended warranty will cover TCP (tom cat piss) even if you had one.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HP in part numbers for ink differ in the uk and the US for the same item ?

Purchasd my printer in the UK. PHOTOSMART 2575 ALL IN ONE
Trying to source the correct HP ink
C8767E on the back of the cartridge. is not recognised
C8767EE is recognised as HP 339 Black Inkjet
I am directed to the US site.
niether is recognised by the us site where i will buy my replacements
if i search the US site by model number I get HP98
http://h10025.www1.hp.com/ewfrf/wc/product?product=457333&lc=en&cc=us&dlc=en&lang=en&cc=us&y=10&x=7
and no sign of the 336 337 or 339 as listen on page 85 of my userguide.
I assume there is some cross matching of part numbers between the UK and the us site.
Having spent two weeks wandering around all the stores in Mandeville and Kingston Jamaica ( no mean feat i can tell you) looking for the 33 series as lised in the userguide. It will be with mixed blessins if there is a comparison chart between what the UK says I can use and what the us says I can. Then I can go shopping locally with my us part numbers and people might actually have stock.
If i assume that the 98 is the correct number there is not even a list on the site to confirm what printers the 98 can be used on.
Come HP you have not done well on this issue. Basicis such as catrirdge supplies should have global partnumbers or I should be able to easily acesss a compatibility Matrix.
And ive not started looking for colour yet.

Hi, if you purchased the printer in the UK and have now relocated you'll need to get the region reset on the printer. You can do this by contacting phone support ( Contact HP ) . Hope this helps..
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Additonal Text for Part Numbered Items

Hello,
My problem is we have standard descriptions for part numbered items. I want to be able to add additional lines to explain to a buyer what the part is. Maybe one or two lines.
MM02 provides kind of what I'm looking for, though this text only appears in the Material Sales Text.
I'm looking for something which will appear in Item Note, Packing Note & Delivery Text.
Thanks you in advance,
Karl

For this you can refer & explore standard functionality [ Text Determination |http://www.magnatraining.com/text-determination-in-sap-sd/]
By that, one the text type: Material Sales Text is maintain in Material can be referred to your desired level like Item Note, Packing Note & Delivery Text.
Regards
JP

Looking for source or part number T540 drive caddy

I am looking for either a source or the part number for the bracket that holds the main hard drive in a T540 or W540. It may be the same as a T440, but I don't have one to look at. The parts list does not show it separate from the drive. Any info would be appreciated

Hi Richk,
I pulled the unit out from my W540 and funny enough, there are no markings of any kind on this plastic rail / bracket.
I found a used unit on eBay, but no parts numbers for neither that nor the foil. I will keep Googling, see if I turn something up.
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

/sapapo/rm60rr20- Not deleting Requirements for some part numbers

Hi Friends,
We normally run /sapapo/rm60rr20- /sapapo/md74.....for reorganising independent requirements in SNP.
But we found that its not deleting requirements for some part numbers. Can any one please tell me why?.
Is this anywhere linked to master data?
Thanks
Krishna

In the main SAP menu under Master Data, there is a link to look at the change documents of master data. You may want to go to product change documents and see what are the changes that were made to the products where you are unable to reorganize the PIRs. There can be some common changes that you should be able to figure out.

[SOLVED] makepkg error: Why is it looking for '.part' files?

I've been seeing the following problem with every package I try to build with makepkg. The download works, but then makepkg complains that it can't find the source file:
==> Making package: android-sdk r20-2 (Fri Jun 29 11:01:35 CDT 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading android-sdk_r20-linux.tgz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 78.7M 100 78.7M 0 0 1640k 0 0:00:49 0:00:49 --:--:-- 2166k
mv: cannot stat ‘/usr/local/src/android-sdk_r20-linux.tgz.part’: No such file or directory
==> ERROR: Failure while downloading android-sdk_r20-linux.tgz
Aborting...
Why is it looking for the .part file, instead of the .tgz file? When I run makepkg again, without doing anything in between, it finds the .tgz file and goes on its merry way.
I'm using curl, and I haven't tried wget. Judging by my unscientific sample of forum posts it looks like wget is the de facto standard, so this may not be on anyone else's radar.
Here's my makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j4"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool emptydirs zipman purge !upx)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
OPTIONS=(strip docs !libtool emptydirs zipman purge !upx)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
PKGDEST=/usr/local/pkgs
#-- Source cache: specify a fixed directory where source files will be cached
SRCDEST=/usr/local/src
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Packager: name/email of the person or organization building packages
PACKAGER="Whitney Marshall <[email protected]>"
#-- Specify a key to use for package signing
GPGKEY="E4FB694E"
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Last edited by wmarshall (2012-07-02 15:39:16)

It looks like this code is the culprit. I don't have time to dig into it right now, but presumably this works with wget. I would have thought any cmdline downloader would manage renaming the .part file itself...?
makepkg, lines 395-417 (pacman 4.0.3-2):
395 # replace %o by the temporary dlfile if it exists
396 if [[ $dlcmd = *%o* ]]; then
397 dlcmd=${dlcmd//\%o/\"$file.part\"}
398 dlfile="$file.part"
399 fi
414 # rename the temporary download file to the final destination
415 if [[ $dlfile != "$file" ]]; then
416 mv -f "$SRCDEST/$dlfile" "$SRCDEST/$file"
417 fi

How do i find my Apple Parts Numbers for my Macbook Pro?

I have a macbook pro, 2.4GHz Core 2 Duo. Model number is A1212.
I was wondering how I could find out what the correct apple part number is for a replacement top case. (the place where you put the keyboard).
I have no problem replacing the case, I just need to know what the part number is.
I also have another top case that I ordered off ebay and I would like to know how to find the correct apple part number for that case as well.

A1212 is not your model number. Check here for model numbers:
http://www.everymac.com/systems/apple/macbook_pro/index-macbookpro.html
Check here for parts:
http://www.ifixit.com/Categories/MacBook-Pro-15-Inch/85
But for Apple part numbers you may need to call ifixit or contact Apple.

Can I find the part numbers for the output drivers on the PCI-6534 Card?

We are planning to use an NI-6534 card to test very sensitive hardware. The DAQ will simulate the interface to which this particular piece of hardware will be connected.
Our concern is that there is some way that we can damage our hardware during test.
The best way to insure that this is not a concern would be to say that the DAQ interfaces to our hardware in the exact same way as our real interface. This of course is not likely, so we need to understand the differences. To do this I think we need to compare the I/O spec of the devices directly connected to our hardware under test on both the DAQ and our interface.
Of course we need to know the part number of the NI I/O output drivers.
The kind of data I think we are interested in is:
Voh, Vol, Ioh, Iol, and transition times...
Thank you for any help you can provide.

Hi goldbach,
The other specification you were looking for, slew rate, is typically between 2.75 and 4.5 ns depending on your load. The following knowledge base discusses briefly on this point.
DIO-32HS (6533) Cabling Issues
http://digital.ni.com/public.nsf/websearch/783D15B155FAC6F1862566B3006A32F0?OpenDocument
Hope that helps. Have a good day.
Ron

Look for LabVIEW part time programming

Hi,
I am available for part time LabVIEW programming. Areaingapore.
Certified LabVIEW Developer.
Currently resides at Spore. Look for LabVIEW project.
Please email me at [email protected]
BR,
Bug Killer

you can visit my website: www.bjcyck.com

Looking for part numbers for ESW-520-24 rack mount brackets

Similar Messages

Maybe you are looking for