Looking for Procedure Builder

My understanding is that Procedure Builder is supposed to be part of the Oracle Forms software. I have installed the 9i Developer Suite, but cannot locate Procedure Builder. Where should I be looking? Any help is appreciated.

procedure builder is not part of Oracle9i Developer Suite anymore. See the Oracle9i Forms obsollecence paper on otn.
You can still use Oracle Forms to build stored procedures and debug them with the new debugger.

Similar Messages

  • Looking for App builder

    HI...I am new to community.  I am looking for someone to build an app for my sales team.  I have about 300 people who are in and out of retail stores and I would like to develop a standard retail audit form that they could fill out on the go.  Please let me know cost, timing, and other considerations.  I work for a large firm so someone who is familar with typical IT organization.  thanks  Ted

    Hi and welcome to the forums!
    A couple of places for you to visit:    Blackberry 101    Tips & Tricks
    Have you tried:   BB Applications          or       BB Development
    Happy to have you here!
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • Looking for GUI building tool

    I am looking for recommendation on tools to build GUI
    Specifications:
    Should be as much as like the visual studio tools
    Use drag and Drop
    Have the options to edit components and their parameters from gui (like visual studio) instead of in the code
    I want the Code to be in Model-view-controller pattern, using different classes to implement the pattern
    I want to have lot of options to edit the apearnce
    any ideas?
    Thanks
    Edited by: Yuval_s on Jan 15, 2009 4:32 AM

    Yuval_s wrote:
    But my company software has hundreds of dialogs\forms, it will save us time.Just my opinion, but no it won't. We don't have "hundreds" of dialogs/forms on our project, but we have several dozen - many of which have very complex layouts. When you understand the code and can do it by hand, you'll find that it's far quicker to edit manually vs. a gui editor. This is just my opinion based on my own experience, but I do it everyday for a living.
    Now i am writing in MVC way that the dialog and the controller are in different classes and i didn't find good tool that generate code like this.We also have the "logic" split out of the gui code. I don't know of any code-generator that does this for you. All the more reason to know how to do it by hand.
    think about it like you need to write now code for hundreds windows in short time...I already do.
    I suspect that a majority of the regulars in this forum who code Swing for a living don't use a gui editor. Just a guess, though.
    Good luck.

  • Looking for Flex Builder 2

    Anyone know where I can find the Eclipse version of this (if
    there was one)? I'm sure I have the install disc around here
    somewhere but I have an old app that needs some work and can't seem
    to locate an Eclipse pluggin for this. any help appreciated.

    quote:
    Originally posted by:
    michael_ramirez44
    Amfphp 1.9 is easier to use because it supports
    RemoteObjects.
    I second that...I just finished implementing a service using
    AMFPHP
    1.9 beta 2 and couldn't be happier. I then upgraded it to use
    the
    AMF C extension which
    speeds up encoding and decoding. I haven't looked back
    since.

  • Looking for help building app! Great idea!

    Hey, I have a great idea for a really fun game that could draw attention to alot of iOS users and soon become very popular. I have done some browsing in the App Store and the idea i have is not yet there.
    The reason I am reaching out to the forums is because I need help:
    I have no coding experience but i have all the necessary tools. I am signed up as a developer. I pay 99.99$ a year.
    I would love to get this idea rolling and would love to begin to develop a team!
    Would anyone like to help?
    NEED:
    -:Coder
    -:Artist
    For more information please email me at [email protected]
    Thanks!
    Hoping for some positive feed back!
    -Scott

    I hope you get some positive feedback but there's a couple of things you should know:
    1.  Everyone who is a serious developer and already knows how to deveop apps is too busy working on their own great ideas.
    2.  You're about to start getting lots of spam because you posted your email address in a publicly accessable forum.

  • Procedure Builder in 9iDS

    Hi, I am looking for procedure builder in the Oracle 9i DS. Is there such a product? Has it been discontinued?
    Thank you, -Cecil

    Procedure Builder is no longer shipped as a stand alone product in Oracle9i Developer Suite.
    What do you want to do with it? If you are looking for a PL/SQL development/debugging environment you can use Forms or even JDeveloper -
    See : http://otn.oracle.com/products/jdev/htdocs/database/db_overview.html

  • Looking for some help with building insert statements...

    Hi, I am using some sql to build some insert statements for me to update a set of tables in our qa environments. The scripts that I have created were working great until someone added a column to some of the tables in the qa env which in turn makes my scripts break because I was simply building the statment to do someting like this...
    insert into dest_table (select * from source_table@dblink);
    But now when the coumns in the tables do not match it breaks...
    This is the dynamic create script I use, can anyone help or suggest a better way to be able to build update statements update to qa tables when the columns are mismatched?
    spool insert.sql
    select
    'insert into ' || table_name || ' (select * from ' || table_name || '@prod );' || chr(10) || ' commit;'
    from user_tables
    where table_name in
    (select * from refresh_tablesl)
    any help is greatly appreciated,
    Thanks.

    See my reply to your duplicate post
    looking for help building dynamic insert statements...

  • Looking for build-in to set variable in PL/SQL

    Hi
    I'm looking for a build-in to set a variable in PL/SQL for updating tables?
    I have to update some tables with the same form, so I want to use variables
    to write the code only once in a trigger.
    Like:
    Update global.variable Set column1 = :block1.item1,
    Set column2 = :block1.item2,
    but it doesn't work with a variable, only with a exactly indentifier (tablename)!
    I allready tried with NAME_IN, without positiv result.
    Anybody more ideas?
    thanks in advance
    remo

    Hello
    Thanks for your idea.
    I'm not sure, if this resolve my problem. First thing; it's written in a form.
    But the 'UPDATE' statement requires a tablename. And for this tablename
    I'm using a variable which was already set to a tablename.
    Just not to write this code 15times(!)- which also (could be) a acceptable solution.
    best regards
    remo

  • Looking for help to upgrade Z61m HD and OS

    All,
    Being a layman I am looking for some help on how to do the following:
    -  Upgrade my current HD from the small 105gig to a new 320 gig HD - have the new SATA drive.
    -  Also wanting to get off of Vista to Windows7 - I have the new Windows 7 ulimate software.
    Looking for procedures on how to upgrade(back up data, make boot disks, when to upgrade the OS.....) and not lose my data.  I own a 500 gig external HD with plenty of room.  Any pitfalls and gotchas are apreciated too.

    I did a quick google and found some Windows-based programs you could buy to do that, but nothing for the Mac.
    However, you ought to be able to do it in word (I do when I have to print chords w/ lyrics to play with a group). You just have to fiddle with the space bar and tab to line up the chord changes with the lyrics.
    It might be easier if you use a fixed-width font like Courier.

  • New Build - Looking for Tips

    So I have purchased the components listed in my Sig and getting ready to set everything up, just wanting to get some tips/advice on the best way to go about it.
    My biggest question is concerning RAID, as this is the first time I have set one up. Any tips, guides, etc. on how best to accomplish this on my MB is appreciated. I am wanting to end up with a 1TB RAID 1+0 (4 500GB drives paired up, both pairs RAID 1, then one pair RAID 0 of the other pair). Am I correct in assuming it is best to plug only 2 in (SATA 1&2) setup the RAID 1 on those, then plug the other 2 in (SATA 3&4) and set those up as RAID 1, then tie everything together as with RAID 0? Or can I plug them all in and do it all at once? The instructions look fairly straight forward, just looking for some clarity and actual user input.
    Do I need to update my BIOS? I haven't tried booting at all, so not sure what I am starting with, but I notice in the CPU compatibility the same CPU I have lists Version 10.4. Should I stick with what I have and only upgrade if I am having issues, or should I upgrade from the start.
    I have a SATA Blu-Ray burner, and have seen a few things mentioning a SATA ODD coming up under RAID configurations. Is this an issue, is there a certain SATA port I should use to avoid this, certain settings I need to pay attention to, or does it matter?
    Regarding memory, I read (in a sticky) that fewer memory sticks result in faster performance due to Dual Channels. I was under the impression that if all 4 slots were filled you would have 2 groups, each using Dual Channel. Am I incorrect in that? If faster performance (MHz-wise) is achieved by only using 2 sticks, will I get better overall results by removing 2 sticks (leaving only 4GB) or will the additional memory compensate for the speed loss? (The RAM is rated as being Dual Channel, if that makes a difference).
    Does anyone have any general computer building tips? I have built a number of them before, but would like some input on the best/most efficient/fewest problems way is. All previous builds have been done with default configurations, if anyone has suggestions for some settings that they recommend those are welcome. I will be over-clocking at some point, depending on how things go and if there is any advantage to doing so from the start or waiting until the system is setup. I did notice this MB has a OC center as well as the Easy OC Switch. Any input or thoughts on those?
    To sum it up, I am looking for as much input on getting everything set up as easily as possible, with the best settings without requiring a lot of adjustments. Any and all input is appreciated!

    Quote from: Bas on 22-September-10, 15:45:56
    Windows rating is rather silly, it's not the sum of the system but rather the slowest part that gives you this rating.
    Yeah, I agree with the silliness of Windows final rating, however I do like to use the individual ratings as a sort of benchmark. The issue isn't the final rating, it the rating I am receiving for my processor, which is 4.1, and is the lowest rating on there.
    From memory -
    Processor - 4.1
    RAM - 4.9
    Graphics - 7.4
    Gaming - 7.1
    HD - 5.9
    As a comparison, another computer with a 2.2GHz quad core processor, 4GB RAM, and single drive rates as follows:
    Processor - 6.9
    RAM - 7.2
    Graphics - 4.8
    Gaming - 6.1
    HD - 5.9
    With the components I have vs the comparison computer, I would expect CPU, RAM, and HD to all be higher, but they are lower or the same! So something somewhere is not right in my opinion.
    Thanks for any feedback!

  • Looking for a simple tutorial to building my first responsive web site in Dreamweaver CC.

    I am looking for a simple tutorial to building my first responsive web site in Dreamweaver CC.
    I have watched the tv.adobe video 3 times and I cam not able to do the actions the author shows.
    help.
    Ken Edwards

    Responsive and simple don't go hand-in-hand.  First do some prep-work to understand the concepts.
    Responsive Web Design
    http://coding.smashingmagazine.com/2011/01/12/guidelines-for-responsive-web-design/
    Introduction to CSS Media Queries
    http://www.adobe.com/devnet/dreamweaver/articles/introducing-media-queries.html
    Jump start your RWD projects with any of the Responsive Frameworks below:
    Foundation Zurb
    http://foundation.zurb.com/templates.php
    Skeleton Boilerplate
    http://www.getskeleton.com/
    Initializr (HTML5 Boilerplate, Responsive or Bootstrap)
    http://www.initializr.com/
    DMX Zone's Bootstrap FREE extension for DW
    http://www.dmxzone.com/go/21759/dmxzone-bootstrap/
    Project Seven's Page Packs (Commercial CSS Templates)
    http://www.projectseven.com/products/templates/index.htm
    Have fun!!
    Nancy O.

  • The Distribution Kit Builder is Looking for the NI Variable Engine in an old distribution, cant find it and fails to build

     I am unable to build a distribution kit because the builder appears to have saved a path to the NI Variable Engine which is not valid.  I appear to have the NI Variable Engine installed.   There are NI Variable Engine 2.5.0 .xml files loaded in on my computer (See attached for listing of drivers loaded).  I do not seem to be able to break CVI's Link to my past installers for getting drivers.  I've tried creating a new installer but had the same trouble. 
    I am running a 64 bit Laptop with Windows 7, building a 32 bit application, running CVI 2010.
    Solved!
    Go to Solution.
    Attachments:
    ATAHM Outline.ppt ‏61 KB

    The default path is the path to whatever distribution installed NI Variable Engine on your machine. For example, if it was installed from a Driver Disk, the path would probably be D:\. However, from the images you originally posted, I can see that you were being prompted to provide the path to one of your earlier ATAHM distributions. It was looking for it at this path:
    c:\Users\chill\Documents\Development\AATAS\ATAHM\distributions_ATAHM\ATAHM Oct 24 2011\
    Do you still have that distribution? If you can point it to that distribuiton, you should be good.
    Now back to the error you were seeing... Your version of that .NET manifest file matches (except for the version number) Revision A from the Knowledge Base, so you should try replacing it with Revision B (and rename it to NI .NET Framework 2.0 Language Pack x86 Installer {F8ECD2D6-659C-49EB-8454-5F8F7B526FCF}.xml). Make sure you restart CVI after swapping the file. I would expect that to solve your problem. If it doesn't, you'll have to let me know what the new issue is, or if you're somehow still seeing the same error message.
    Mert A.
    National Instruments

  • Distribution Builder looking for product installers

    I'm having a problem building a distribution.
    The builder is asking for product installers that were part of a different distribution and no longer
    on the machine. Its looking for the NI-DAQmx Core Runtime 9.6.2 and the Ni-VISA Runtime 5.3 installers.
    How do I remove the dependency of the previous distribution. In the Drivers & Components tab of the Installer
    the change Source button is disabled how do enable it.
    I'm running CVI 2012 on an XP machine. I appreciate any help .

    Hello chetp
    This might help:
    http://digital.ni.com/public.nsf/allkb/E2D8B36AE74458C8862573A8005C4708?OpenDocument
    Regards
    Mart G

  • Looking for a procedure to switch an iPod 2nd generation from Win. to Mac

    Hello,
    I'm looking for a procedure to switch/migrate an iPod 2nd generation from a Windows computer to a Mac running Snow Leopard.
    When the iPod was first connected to the Mac its content was imported fine. However, ever since when the iPod is connected to the Mac it will appear in the Finder as a "drive" but doesn't appear anymore in iTunes.
    I couldn't find any document in Apple's support web site about how to properly handle that type of migration.
    I would appreciate if somebody could point me to a documented procedure on how to resolve this, or provide any other type of suggestion.
    Thank you.

    I solution the problem of my iPod 2G touch wheel for windows !!!!
    problem:
    iPod 2G touch wheel windows formated version 1.2.1
    Powermac G5 Mac OS X Leopard 10.5.8 iTunes 9.0.3 (last version)
    it mounts on finder as a volumen, launch iTunes, but don´t recognize it as ipod ?¿?¿!!?¿?¿
    do the same in PowerBook G4 Mac OS X 10.5.8 iTunes 9.0.3
    format Ipod 2G with "disk utility" to mac format
    it mounts on finder as a volumen, launch iTunes, but don´t recognize it as ipod ?¿?¿!!?¿?¿
    I can´t restore and update ipod software !!!!!! aaaaaHHHH!!!!!!
    only works as firewire HD
    re format Ipod 2G with "disk utility" to windows MS-DOS FAT (don´t ask me why !! desesperation!!)
    My solution:
    I have other partition with Mac OS X Tiger 10.4.11 (for audio aplications)
    iPod 2G windows formated (no working, formated!)
    powermac G5 Mac OS X Tiger 10.4.11 iTunes 8.0.3
    IT WORKS !!!!!!
    restore and update iPod to version 1.5
    I put iPod in manual mode (no syncro), start up in 10.5.8 iTunes 9.0.3 and Works !!!!!!
    where is the problem? iPod version 1.2.1 ? iTunes 9.0.3?
    upgrading iPod in windows to 1.5, is the same solution?
    hope this helps somebody ...

  • Passing cursor record values to procedures - looking for advice

    I frequently use cursors in my programs and need to pass the values from said cursor around in the program to other procedures/functions.  I am looking for advice on the best or recommended way of doing this.
    Currently the majority of my programs do something like this:
    CREATE OR REPLACE PACKAGE BODY some_pkg AS
         CURSOR some_cursor IS
              SELECT t.col1,
                               t.col2,
                              t.col3,
                   FROM some_table t;
    PROCEDURE sub_proc
         (p_cursor               IN      some_cursor%ROWTYPE)
    IS
    BEGIN
         dbms_output.put_line(p_cursor.col1);
    END sub_proc;
    PROCEDURE main_process
    IS
         l_cursor          some_cursor%ROWTYPE;
    BEGIN
         FOR l_cursor IN some_cursor LOOP
              sub_proc(l_cursor);
         END LOOP;
    END main_process;
    END some_pkg;
    Basically I create the cursor as global so I can use it's %ROWTYPE as a parameter datatype in my procedures. 
    I understand there are other options such as using a defined record type, or ref cursors, but I'm not totally clear on how ref cursors would help me, I don't really understand them well.
    Can anyone provide some feedback on how I currently handle this situation vs. the alternatives?
    Thanks

    I am not sure what you need to do.
    You can base records on cursors or tables using the %ROWTYPE operator.
    Cursors can be defined in the package header and used elsewhere by using normal cursor functionality (untesed)
    create or replace package my_package as
      cursor my_cursor is
        select *
          from dual;
      my_procedure;
    end my_package;
    create or replace package body my_package as
      procedure my_procedure is
      my_record my_package.my_cursor%rowtype;
      begin
        for r in my_package.my_cursor loop
          my_record := r;
        end;
      end my_procedure;
    end my_package;
      This can allow you to define the cursor in one place and reference it elsewhere.
    Reference cursors are pointers to result sets.  They reference actual datasets and can be passed between routines if defined in package headers.  There is a little more overhead using reference cursors but they support dynamic sql if needed (it usually isn't). and you MUST carefully coordinate FETCH commands to receive the values the cursor is selecting (this is harder than it looks)(untested)
    create or replace package my_package as
      type my_refcur_type is sys_refcursor;
      my_procedure;
    end my_package;
    create or replace package body my_package as
      procedure my_procedure(p_refcur out my_package.my_refcur_type) is
      begin
        open p_refcur for 'select * from dual';
    end my_package;
    --elsewhere
    my_package.my_procedure(my_cursor);
    fetch my_cursor into v_dummy;
    Hope this helps

Maybe you are looking for