Lookup Up Column allows Title but no Managed Columns held in Lookup List

Hi
I am building a number of lookup lists to help with the way content is stored in a list..
Now, if you create a straight lookup list say with text columns. Then you can select Title (key) and additional fields in the dependant list settings, when creating a lookup column that points at the lookup list.
Now, if I want to added managed metadata columns to the lookup list then I am unable to select these as additional columns in my dependant list - not the end of the world but I am bound to be asked for them by my users.
Ok I guess this a restriction due to the nature of the way terms are stored e.g "#id term name" . However, I wonder if there is a workaround - I thought of giving on of these a try unless the advice was to the contrary :
A custom DVWP to replace the the List
Custom fields that mirror the value selected for terms
Connected web Part
Cheers
Daniel
Freelance consultant

Hi Daniel, yes, that's a pain when you can't access certain types of columns using a lookup. There are other ways of doing what you want, but I found the best way to accomplish it is to either use a workflow to copy the information into a text column or
use InfoPath.
cameron rautmann

Similar Messages

Is there any way to do a mass copy and paste of song titles from the "name" column to the "sort name" column? I know it can be done with individual titles but I have over 6,000 titles in my library.

In iTunes, is there any way to do a mass copy and paste of song titles from the "name" column to the "sort name" column? I know it can be done with individual titles but I have over 6,000 titles in my library.

Thank you. I have heard of Logic Pro 7, but I have never personally used it. I'm still growing in the world of Composition, and I know that it is something I will be studying in one of my Computer Music classes coming up for my degree. I think it is something I will look into getting once I can justify the price of it. I guess for the time being, I will continue to play and grow in my ability to use and take advantage of GB, and then see what I can do about or with Logic Pro when I'm ready. The thought of spending $1000 for a program is hard to bite, because I've already spent a lot to produce my music, not only electronic music, but also chamber music and so on. I had no idea it would be so expensive to dive deep into the world of composition! lol.
Finale 2007: $500
Sibelius 4: $500
Jam Packs: $400
Midi Keyboard Interface: $100
PowerBook: $1700
Printer for printing scores and analysis: $150
Logic Pro 7: Oy!
As you can see it adds up very quickly...that doesn't even include my personal instruments and study materials.
Thank you for your input, as I haven't really worked much with LP, and therefore didn't know which features are available. I will talk with some of my Composition buddies, and professors and see what they have to say as well, and who knows, I may be able to get the express version through one of them.

Song title is incorrect in the "NAME" column in itunes, but correct at the top of the page for the song playing.

All of a sudden most of the song titles under the "NAME" column in itunes is incorrect. When I click on the file name it plays a different song but it points to the correct song elsewhere on the list. Also it shows the correct song name at the top of the screen. Is it possible to get the files under the NAME column to point to the right song? This is happening on my PC windows 7.

Move your mouse to the top of the Firefox window, then right click.
You will see a menu of the available toolbars. Select '''''Customize'''''.
In the new window, look for the icon. When you find if, hold down
the left button on it, and move it to where you want it to be.
You can move any of the icons you want from here, but some
icons are locked in place.

I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see t

I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see the date. the sidebar no longer has the option for date. the most recent only shows the time.

If you only see the time then that would mean that you see an entry of the current day (today).
History items from past days should have the date as well in the Most Recent Visit column.
You should be able to see this changing if you open the last 7 days folder and scroll down.

SharePoint List Form using InfoPath 2010 "Cannot insert the value NULL into column 'tp_DocId', table 'Content_SP_00003.dbo.AllUserData'; column does not allow nulls"

I am experiencing issue with my SharePoint site , when I am trying to add new Item in List . Error given below :--> 02/03/2015 08:23:36.13 w3wp.exe (0x2E04) 0x07E8 SharePoint Server Logging Correlation Data 9gc5 Verbose Thread change; resetting trace
level override to 0; resetting correlation to e2e9cddc-cf35-4bf8-b4f3-021dc91642da c66c2c17-faaf-4ff9-a414-303aa4b4726b e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015 08:23:36.13 w3wp.exe (0x2E04) 0x07E8 Document Management Server Document Management 52od
Medium MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/sites/00003/Lists/PM%20Project%20Status/NewForm.aspx?RootFolder=&IsDlg=1]. Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3)
level for this list. e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015 08:23:36.17 w3wp.exe (0x1B94) 0x1A0C SharePoint Server Logging Correlation Data 77a3 Verbose Starting correlation. b4d14aec-5bd4-4fb1-b1e3-589ba337b111 02/03/2015 08:23:36.17 w3wp.exe (0x1B94)
0x1A0C SharePoint Server Logging Correlation Data 77a3 Verbose Ending correlation. b4d14aec-5bd4-4fb1-b1e3-589ba337b111 02/03/2015 08:23:36.31 w3wp.exe (0x2E04) 0x07E8 SharePoint Foundation Database 880i High System.Data.SqlClient.SqlException: Cannot insert
the value NULL into column 'tp_DocId', table 'Content_SP_00003.dbo.AllUserData'; column does not allow nulls. INSERT fails. The statement has been terminated. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject
stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavi... e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015
08:23:36.31* w3wp.exe (0x2E04) 0x07E8 SharePoint Foundation Database 880i High ...or runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream,
Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior,
RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
command, CommandBehavior behavior,

Are you trying to setup P2P? Could you explain the process you followed completely? By anychance you create the backup and then created the publication?
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

I prefer to arrange my photos by title but when I shut down Iphoto, my photos rearrange by date. This is not acceptable for my growing library of snanned black and white ancestral photos. How do I get photos in events to stay in place ?

I prefer to arrange my photos by title but when I shut down Iphoto, my photos rearrange by date. This is not acceptable for my growing library of snanned black and white ancestral photos. How do I get photos in events to stay in place ?

I actually am illiterate on the use of the finder to to view photos in folders. I guess I will go to a class at the local Apple store for a lesson on the uses of finder .
My method of viewing my photos are through events in I photo.
1. Download from camera or scan in from old photos.
2 I organize photos into events by occasion, or happenings in a certain year, or a group of photos with memorabilia of a certain person from childhood and on. etc.
3. Because Iphoto does not allow rearranging as I was able to do in my old PC with Corell, I drag all of the photos to an " album" on the left side of sceen.
4. I arrange photos in "order" after which I number each photo in sequence. I do this for a few of reasons.
          - if a photo is accidentally deleted I know it. I can usually remedy this by checking my trash or
rescanning.
          - I can sort by title without complications and this holds in "album"
5. The pictures will re arrange automatially to match the album in I photo.
6. This worked great in I-photo 09 but now in mountain lion the pictures in events go back to "
sort by date" and will not hold "sort to Title"each time I photo is closed down. What a nuicance it is to have to go to view and click "title" again and again every time Iphoto is opened.
7. Can I go back to Photo 09? .

Help on BPM Steps (Lookups are not allowed, so only BPM)

Hi Experts,
Please help me to design the BPM for the following process (A mandatory rule is Lookups are not allowed so I must finish this with out using lookups.)
Step1. We get a file from FTP, Once we get the file, We need to get the next unique identification number from a webservice(a sync call, As per our rule, u201CNot to use lookupsu201D).By the way there is no relation between the data fields for the FTP file and this SOAP call, i.e. the SOAP request is having constants as inpput.,but once I receive the file then only I need to make a call to get the next unique identification number.
Step2. Once we receive the unique identification number from the SOAP call, I need to merge this identification number with the file (I have received from the FTP in STEP1) and then needs to send to a RFC which is a sync call again and it returns a logical number.After getting this logical number then only go the next step(The returned logical number means a confirmation for us,i.e after getting the number just go to next step)
Step3. After getting the logical number from RFC, I need to send the obtained unique identification number( Of Step1, Webservices Unique identification) to another FTP as asynch.
This one is easy when we use lookups, but we have a condition u201Cnot to use lookups!u201D so please suggest me the steps(BPM) to do, which donu2019t let the BPM down.
Thanks in advance.
Regards,
Rahul.

Your complete BPM design will be:
Receuve(FILE_ABS_Async)->Transformation(ToPutConstantsInTheSOAPReq)->SyncSend(SOAP_ABS_Sync)->Transformation(Needed, format will be 2:1; will have FileMSG_&_SOAPResp as source MSGs and RFCReq as target MSG)->SyncSend(RFC_ABS_Sync)->Switch(To Check if the RFC Logical Number does not exist...if it does not exist then in the condition branch of the Switch put a Control Step (action as Cancel Process)->If RFC Logical Number present then otherwise branch will be executed( nothing to be placed in this otherwise branch)-->Transformation(SOAPRespMSG of SOAP Sync step into FILE message format)-> Send(FILE_ABS_Async)......
Wherever you have sync send steps put them in a block and insert an exception branch in that Block....in the exception branch put some logic which will be executed when there is an error in the Sync Call.....so your BPM wont fail even if the Sync Send fails.....
Regards,
Abhishek.

Planning Layout KP75 - Max 30 columns allowed in the layout

Hi,
I am trying to create a Planning layout(Excel Upload for KP26) in Transaction Code KP75.
But when i am trying to create the columns, it is giving the error message that "Max of 30 column are allowed in the planning layout".
But my requriement is to have around 40 columns.
So is there any way that we can extend the max columns allows to 40.
Regards,
Shree.

What kind of planning you are doing in 40 columns? Can you please elaborate.

Not allow simultaneous login on managed computers using profile mangaer

Does any one knows how to not allow simultaneous login on managed computers using Profile Manager instead of Workgroup Manager?
Thanks in advanced

Hi Folks
First - thanks for your help.
Closing this out - here is what I learned:
1) Needed to ensure my server was Kerberised and that Kerebos was running correctly
2) Local users have precedence over network so I need to ensure I don't use the same short name. While using the "id" command you may be able to see the network user ID, the local of the same name appears to take precedence.
3) Using the "kinit" command useful for confirming Kerebos is working correctly
4) Home directories created - had already done this but what finally got this working was stopping and restarting AFP Service.
So was able to successfully login to Mac Client using OD username and password - it mounted the network home share just fine on the client, loaded preferences etc.
Now on to create network users with Mobile Accounts for my laptop users - wish me luck

I have used Illustrator CS3 on my two try or three previous computers. Now I try to install Illustrator CS3 on a my new (4 weeks old) computer. Adobe does not allow me, but demands me to proof myself being an owner of Illustrator CS2 or older. I don't man

I have used Illustrator CS3 on my two try or three previous computers. Now I try to install Illustrator CS3 on a my new (4 weeks old) computer. Adobe does not allow me, but demands me to proof myself being an owner of Illustrator CS2 or older. I don't manage to speak English on phone, bad hearing, to fast spoken, odd expressions.What can I do? Is there a possibility to write a complain?

You can use online chat to talk with Adobe. For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Change URL of Edit column and Title column link that appear on AllItems.aspx

Hi there,
In the below snapshot. I am trying to change the URL of the Edit column and Title Column. By default when click on Edit Icon on each item, it opens the EditForm.aspx for that item. Similary by clicking on title of an item, it opens DispForm.aspx.
I need to change it to my custom forms, CustomEditForm.aspx and CustomDispForm.aspx . Could anybody please suggest if it can be done by any Jquery or using SPD
I know I can change the default forms from SPD.
I don't want to change the default forms. Because for some users I need to show them default forms. for some users I need to show custom forms.
Many Regards,
Khushi
Khushi

Hi Alex - I understand that I need to identify users. I have the following script for that. But Where should i write so that redirection applies to all the condition items in AllItem.aspx
function IsGroupMember(GroupName)
var isGroupMember = false;
$().SPServices({
operation: "GetGroupCollectionFromUser",
userLoginName: $().SPServices.SPGetCurrentUser(),
async: false,
completefunc: function(xData, Status) {
if($(xData.responseXML).find("Group[Name='" + GroupName + "']").length == 1)
isGroupMember = true;
else
return isGroupMember;
Khushi

When accessing the any tasks from Fusion Applications homepage, "An error was received for the task Manage Worker Goal Setting Lookups. This task is identified with the code HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS that invokes program /WEB-INF/oracle/apps/

We have installed HCM and CRM modules on Fusion Application 11.1.7 version.
This is 2 node architecture ie IDM components installed in one node and Fusion components installed in another node.
We are able to start the IDM components and Fusion components successfully, but when users are trying to access any task from Fusion application home page, they are getting the below error
A portlet consumer error was received for the task Manage Worker Goal Setting Lookups. Report the error details to the following owning product Goal Management.
An error was received for the task Manage Worker Goal Setting Lookups. This task is identified with the code HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS that invokes program /WEB-INF/oracle/apps/fnd/applcore/lookups/publicUi/flow/ManageCommonLookupsTF.xml#ManageCommonLookupsTF of module code fndSetup. Review the consumer and producer logs for more details on this error.

This may be related to the other issue regarding "FUSION_APPS_WSM_APPID-KEY" as the logs contains exceptions like:
oracle.wsm.policymanager.PolicyManagerException: WSM-02081 : Failed to login to perform requested action.
Please refer to document Fusion Application Service Account Password Expiration Causes Portlet Producer Errors (1486388.1) for steps on how to verify and set the password. There is also exception:
javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User FUSION_APPS_PROV_PATCH_APPID denied
This is also likely caused by an expired password, please see Fusion Apps Servers Are Not Starting Up - Password Policy Error :9000: GSL_PWDEXPIRED_EXCP :Your Password has expired (1629927.1).
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Learning to use lookup transformation - match value in one of two columns

Im a little new to using lookup transforms. Been reading a bit, but using two columns is throwing me off.
Have a dataflow with the source having a column I want to use to lookup in a table in another DB. The match could be in one of two columns in that table.
If a match is found, I need a different value from the lookup table added to the source flow that is going into the destination.
How can I match on one of two columns in the lookup table, and use a totally different column added to the final input going into the destination ?
In the Lookup configuration, I can set the lookup operation to replacing the value in the source, but I want EITHER value match from the two columns from the lookup table to go into the value that will go into the destination.
With TSQL - I would use a case statement and compare the source column to BOTH of the lookup table columns.

You can handle this within single lookup using below query
SELECT CASE WHEN <condn1> THEN Field1 ELSE Field2 END AS lookupField,
CASE WHEN <condn1> THEN Field3 ELSE Field4 END AS MatchField
FROM Table2
Then just do single relationship with LookupField and select MatchField to be aded to output
the condition will specify your fields value condition based on which you determine which column to be matched against
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Insert new user column in pick and pack manager window

Hi all,
Exist a way to insert new column in pick and pack manager window?
I try by code too but i can´t. Is possible to do this?
Thank you all again.
Regards.

Hi Aitor,
Unfortunately, I don't think it is possible to add columns to this particular window. I had a requirement to do this a while back in SBO 2005A SP1 and I ended up designing my own pick and pack window.
Kind Regards,
Owen

I was on a free dictionary website and it asked me if it would like to send me push notifications and i allowed it but i don't want them anymore...how do i get rid of that? I'm using my macbook pro by the way

I was on a free dictionary website and it asked me if it would like to send me push notifications and i allowed it but i don't want them anymore...how do i get rid of that? I'm using my macbook pro by the way

Go to the site and look for an unsubscribe link. Or, contact the site and ask them to stop.

Lookup Up Column allows Title but no Managed Columns held in Lookup List

Similar Messages

Maybe you are looking for