Loop while is not visible

Hi All,
In SWDD (Every step type that can be inserted )are visible but loop while is not visible.What could be the possible reason?Please let me know.
Kind Regards,
Anshu Kumar

Hi Anshu,
Would like to correct you that the step name is Loop (Until).
Please check with the basis team if this step is not visible for you.
Also check if you are not missing out this step while searching.
Hope this helps!
Regards,
Saumya

Similar Messages

How can I update cluster items from inside a while loop that does not contain the cluster?

I have a VI that contains front panel clusters and two while loops. The main cluster contains items such as a doubles "distance" and "stepsize" and boolean "step" (a whole buch of this type stuff). The first loop contains an event structure to detect front panel changes and the second contains code and sub VIs to perform operations based on detected events.
The operator can enter data into either double or click the boolean. If distance is changed the second loop does what is required to process the change. The same happens with stepsize. If step is clicked the ±stepsize value is added to distance and the result is processed. In each case the front panel should track the result of the input and subsequent processing.
Because the clusters are outside the while loop, they are not updated unless I click 'highlight execution' which seems to allow updating each time the execution highlight is updated. There are other issues if I move the clusters into one of the loops.
I've tried referencing the clusters and using local variables and nothing works. It looks like overkill to use shared variables for this.
Any ideas would be greatly appreciated.
Thanks,
Frank

Hi Ben,
Thank you for the response. I followed the link and tried reading everything you posted on AEs but I'm afraid that I didn't understand it all. It seems that each AE example had a single input and a single output (e.g. a double). Is this the case?
What I have is a couple of front panel clusters containing (approximately) 18 control doubles, 8 indicator doubles, 5 boolean radio button constructs and 26 boolean control discretes. I clusterized it to make it readable. In addition I'll eventually have a cluster of task references for hardware handles.
All I want to do is update the front panel values like I would do in a C, VB or any other language. I've tried referencing the cluster and using the reference from inside the loops. I've tied using local variables. Neither works. I'm experimenting with globals but it seems that I have to construct the front panel in the gloabal and then I wouldn't know how to repoduce that on the front panel of the main VI. Sometimes it seems that more time is spent getting around Labview constructs than benefitting from them.
I hope the 'Add Attachment' function actuals puts a copy of the VI here and not a link to it.
Thanks again for the suggestion,
Frank
Attachments:
Front Panel Reference.vi ‏33 KB

TS1382 My I-Pod will not accept a charge. The battery icon I normally see while charging is not visible on the screen. The cord works fine to charge my I-Pad.

My I-Pod will not accept a charge. The battery icon I normally see while charging is not visible. The cord works when charging my I-Pad. Any ideas?

Please find "System Information" in this folder path---Applications > Utilities---and launch it. When it opens, find "Power" in the left-hand contents pane and click it to get something like this in teh main pane:
Copy everything in the "Battery Information" and copy/paste it here. The number values in that report may help us diagnose what is happening.
Also, did you buy this battery directly from Apple or from another source. There are an increasing number of reports showing up that suggests some counterfeit batteries being sold.

Profit centre field not visible while using Posting Key 15

Hi,
While using Tcode F-28 and Posting Key 15 profit cente field is not visible. I have checked following configuration. In OBC4 for Reconciliation account - additional account assignment - here the profit centre field is optional. Likewise I have checked OB41 for Posting key 15 - Profit centre field is optional.
Is there any other configuration to be done inorder to make the profit centre field visible.
Many thanks in advance
Regards
Narayanan

Dear,
SAP Standard System cannot provide PRCTR field for the screen for customer/vendor line
item although it is available if the line item is a G/L account. As a
general rule, the system assumes PRCTR to be filled by document split or
by running SAPF180 and AR/AP transfer depending on NewGL PCA or
classic PCA usage.
It was and still is not possible to enter PRCTR on vendor/
customer items.
One of the workarounds using the standard tools is to use field-to-
field substitution. You can enter the profit center in dummy field,
for example XREF1, and substitute the value entered in XREF1 into
PRCTR field.
I hope this can help You.
Mauri

Why is outbox not visible WHILE a mail is being sent?

When I am sending mail, the outbox is not visible.
The only time it appears is when there is a problem with the outgoing email and it gets 'stuck' - THEN I have an outbox.
Is there any way I can make the outbox remain visible, in case I have made a mistake, and wish to stop a mail from being sent after I have (accidentally or otherwise) clicked on 'send'?
I have a feeling that when I was running Tiger, the outbox was always visible.
I cannot remember what happened on Leopard. I am now on Snow Leopard.
thanks

Click on Window in the menubar while in Mail, and choose Activity. This will bring up a monitor with a Stop button. Several seconds is not long sometimes. Watch the monitor while trying to send -- take note of the time spent connecting to the server versus the time spent transmitting.
Ernie

I have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

i have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

Some updates and clarifications:
1. I already have my 2.4 channel fixed.
2. Wireless network name is 8 alphanumeric characters; no spaces
3. Already using WPA2 security with a 10 alphanumeric key (again, no spaces)
4. I am running Airport Utility 6.0, Mac OS version 10.7.4
I should also say that these problems started happening less than a month ago...prior to that all devices where working normally.
An added update: My two e-readers (nook ST and Kindle 3) are also refusing to connect...perhaps confirming that I have 2.4 GHz issues?

Content not visible while using DVBClassLoader

Hi, we have a problem with DVBClassLoader. We need to download several *.class files from WWW server in our application. The file is downloaded, but the problem is that the content is not visible for main Xlet class. Can someone help us please???
try {
               classPath[0] = new java.net.URL("file:" + sBuffer.toString());
               System.out.println("URL is " + classPath[0]);
               classPath[1] = new java.net.URL("http://XXX.YYY.146.233/");
          } catch (MalformedURLException e) {
          cl = DVBClassLoader.newInstance(classPath);
          try {
               cl.findClass("SecondClass");
               System.out.println("SecondClass read");
          } catch (ClassNotFoundException e) {
          secondClass = new SecondClass(context, scene, mainContainer, telo);
          secondClass.display(path1);

I haven't tried it, but it looks to me like you need to provide the parent ClassLoader in order to handle delegation to the DVBClassLoader.
intstead of this: DVBClassLoader.newInstance(classPath);
use: DVBClassLoader.newInstance(classPath, getClass().getClassLoader());

No. Series not visible in Documents while printing

hi all
I have added "SQ" as prefix before the number series of sales quote.
but when i print the sales quote, the prefix "SQ" is not visible.
pls guide....

Hi John
the way you can do this is to make one field, make it hidden....invisible. Then on the data tab if using 2004, make the file Document Numbering-series (Use alt+mouse lick to display everything in file field). Then make the field Prefix string. If you are using 2005 it is then table instead of file and column instead of field on content tab. This will now pull just the prefix. Then make another hidden field that gets the doc number. Then make a another field that will display a formula that will use the function "concat", it will concat your two fields and display them.
Hope this helps

Data in CSV uploads successfully, but it is not visible after upload.

Hi,
I am using Apex 3.2 on Oracle 11g.
This is an imported application for which I am making changes as per my requirements. As I am new to Apex and even SQL, I request forum members to help me with this.
Please find below the old code for uploading data from CSV. It displays only 6 columns - Database Name, Server Name, Application Name, Application Provider, Critical, Remarks. This was successfully uploading all the data from CSV and that data was visible after upload.
OLD CODE:_
--PLSQL code for uploading application details
DECLARE
v_blob_data      BLOB;
v_blob_len      NUMBER;
v_position      NUMBER;
v_raw_chunk      RAW(10000);
v_char           CHAR(1);
c_chunk_len           NUMBER:= 1;
v_line           VARCHAR2 (32767):= NULL;
v_data_array      wwv_flow_global.vc_arr2;
v_rows           NUMBER;
v_count           NUMBER;
v_dbid           NUMBER;
v_serverid           NUMBER;
v_sr_no          NUMBER:=1;
v_last_char          varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
     v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,APPNAME,APP_PROVIDER,DBID,SERVERID,CRITICAL,LAST_UPDATE_BY,LAST_UPDATE_DATE,REMARKS) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(3),
v_data_array(4),
v_dbid,
v_serverid,
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
==============================================================================================================================
Please find below the new code (which I modified as per my requirements) for uploading data from CSV. It displays 17 columns - Hostname, IP Address, Env Type, Env Num, Env Name, Application, Application Component, Notes, Cluster , Load Balanced, Business User Access Mechanism for Application, Env Owner, Controlled Environment, SSO Enabled, ADSI / LDAP / External Directory Authentication, Disaster Recovery Solution in Place, Interfaces with other application.
This is successfully uploading all the data from CSV, But this uploaded data is not visible in its respective tab.
_*NEW CODE:*_
--PLSQL code for uploading application details
DECLARE
v_blob_data      BLOB;
v_blob_len      NUMBER;
v_position      NUMBER;
v_raw_chunk      RAW(10000);
v_char           CHAR(1);
c_chunk_len           NUMBER:= 1;
v_line           VARCHAR2 (32767):= NULL;
v_data_array      wwv_flow_global.vc_arr2;
v_rows           NUMBER;
v_count           NUMBER;
v_dbid           NUMBER;
v_serverid           NUMBER;
v_sr_no          NUMBER:=1;
v_last_char          varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
     v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
--SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
--SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
--SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,HOSTNAME,IPADDRESS,ENV_TYPE,ENV_NUM,ENV_NAME,APPLICATION,APPLICATION_COMPONENT,NOTES,CLSTR,LOAD_BALANCED,BUSINESS,ENV_OWNER,CONTROLLED,SSO_ENABLED,ADSI,DISASTER,INTERFACES) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4),
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8),
v_data_array(9),
v_data_array(10),
v_data_array(11),
v_data_array(12),
v_data_array(13),
v_data_array(14),
v_data_array(15),
v_data_array(16),
v_data_array(17);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
============================================================================================================================
FYI, CREATE TABLE_ is as below:
CREATE TABLE "REPOS_APPLICATIONS"
(     "APPID" NUMBER,
     "APPNAME" VARCHAR2(50),
     "APP_PROVIDER" VARCHAR2(50),
     "DBID" NUMBER,
     "CRITICAL" VARCHAR2(3),
     "REMARKS" VARCHAR2(255),
     "LAST_UPDATE_DATE" TIMESTAMP (6) DEFAULT SYSDATE NOT NULL ENABLE,
     "LAST_UPDATE_BY" VARCHAR2(10),
     "SERVERID" NUMBER,
     "HOSTNAME" VARCHAR2(20),
     "IPADDRESS" VARCHAR2(16),
     "ENV_TYPE" VARCHAR2(20),
     "ENV_NUM" VARCHAR2(20),
     "ENV_NAME" VARCHAR2(50),
     "APPLICATION" VARCHAR2(50),
     "APPLICATION_COMPONENT" VARCHAR2(50),
     "NOTES" VARCHAR2(255),
     "CLSTR" VARCHAR2(20),
     "LOAD_BALANCED" VARCHAR2(20),
     "BUSINESS" VARCHAR2(255),
     "ENV_OWNER" VARCHAR2(20),
     "CONTROLLED" VARCHAR2(20),
     "SSO_ENABLED" VARCHAR2(20),
     "ADSI" VARCHAR2(20),
     "DISASTER" VARCHAR2(50),
     "INTERFACES" VARCHAR2(50),
     CONSTRAINT "REPOS_APPLICATIONS_PK" PRIMARY KEY ("APPID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R01" FOREIGN KEY ("DBID")
     REFERENCES "REPOS_DATABASES" ("DBID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R02" FOREIGN KEY ("SERVERID")
     REFERENCES "REPOS_SERVERS" ("SERVERID") ENABLE
==============================================================================================================================
It would be of great help if someone can help me to resolve this issue with uploading data from CSV.
Thanks & Regards
Sharath

Hi,
You can see the installed dictionaries and change between them by right-clicking and choosing '''Languages''' inside a live text box eg. the box you are in when replying or right-clicking on the '''Search''' box on the top right corner of this page and choosing '''Check Spelling'''.

Output not visible !

Can you see why the BouncingBalls are not visible ?
Something is wrong with the bounce() method in the BallDemo class
I tried to pick it apart one line at a time. No compilation errors.
Here is the bounce() method and the BallDemo class in which it resides and the BoungingBall class that defines the balls.
Norman
//bounce method
public void bounce()
           int ground = 400;   // position of the ground line
           int numberOfBalls = 0;
           myCanvas.setVisible(true);
           ArrayList balls = new ArrayList();
           // draw the ground
           myCanvas.drawLine(50, ground, 550, ground);
           //ex 5.50 (a)
           System.out.println("Type in the number of balls you would like to see bouncing and hit enter");
             numberOfBalls = input.readInt();
             BouncingBall myBall;
          myBall =   new BouncingBall( 100, 0, 24, Color.blue,
                            ground, myCanvas);
            //(b)
            for(int i = 0; i < numberOfBalls; i++)
              //(c) (d)
           Random rg = new Random(255);
            BouncingBall newBall = new BouncingBall(i + 100, 0, 16, new Color(rg.nextInt(255),rg.nextInt(255),rg.nextInt(255)), ground, myCanvas);
            //add the ball to the ArrayList object
           balls.add(newBall);
          for(int i = 0; i < numberOfBalls; i++)
                 BouncingBall ball = (BouncingBall)balls.get(i);
                 ball.draw();
             // make the balls bounce
             boolean finished = false;
             while(!finished) {
              myCanvas.wait(50);           // small delay
              ball.move();
               // stop once ball has travelled a certain distance on x axis
               if(ball.getXPosition() >= 550 )
                   finished = true;
           }//move loop
                 ball.erase();
         }//for loop
       }//bounce method
import java.awt.*;
//(d)
import java.awt.Color;
import java.util.Random;
import java.awt.geom.*;
//ex5.50 (a)
import java.util.*;
import java.io.*;
* Class BallDemo - provides two short demonstrations showing how to use the
* Canvas class.
//(a) Change the bounce() method in the BallDemo class to let the user
//choose how many balls should be bouncing
//(b) Use a collection to store the balls
//(c) Place the balls in a row along the top of the canvas.
public class BallDemo
    private Canvas myCanvas;
    FormattedInput input;
     * Create a BallDemo object. Creates a fresh canvas and makes it visible.
    public BallDemo()
        myCanvas = new Canvas("Ball Demo", 600, 500);
        input = new FormattedInput();
        myCanvas.setVisible(true);
     * This method demonstrates some of the drawing operations that are
     * available on a Canvas object.
    public void drawDemo()
        myCanvas.setFont(new Font("helvetica", Font.BOLD, 14));
        myCanvas.setForegroundColor(Color.red);
        myCanvas.setBackgroundColor(Color.yellow);
        myCanvas.drawString("We can draw text, ...", 20, 50);
        myCanvas.wait(1000);
        myCanvas.setForegroundColor(Color.black);
        myCanvas.drawString("...draw lines...", 60, 70);
        myCanvas.wait(500);
        myCanvas.setForegroundColor(Color.blue);
        myCanvas.drawLine(200, 20, 300, 450);
        myCanvas.wait(500);
        myCanvas.setForegroundColor(Color.blue);
        myCanvas.drawLine(220, 100, 570, 260);
        myCanvas.wait(500);
        myCanvas.setForegroundColor(Color.green);
        myCanvas.drawLine(290, 10, 620, 220);
        myCanvas.wait(1000);
        myCanvas.setForegroundColor(Color.white);
        myCanvas.drawString("...and shapes!", 110, 90);
    //    myCanvas.setForegroundColor(Color.red);
                // the shape to draw and move
        int xPos = 10;
        Rectangle rect = new Rectangle(xPos, 150, 30, 20);
        // move the rectangle across the screen
        for(int i = 0; i < 600; i ++) {
            myCanvas.fill(rect);
            myCanvas.wait(10);
            myCanvas.erase(rect);
            xPos++;
            rect.setLocation(xPos, 150);
        // at the end of the move, draw once more so that it remains visible
        myCanvas.fill(rect);
       //ex 5.48
       public void drawFrame()
         Dimension myDimension =new Dimension( myCanvas.getSize());
         //Rectangle rectangle = new Rectangle(10,10,myDimension.width, myDimension.height);
         //page 136
        Rectangle rectangle = new Rectangle(10,10,580,480);
         myCanvas.fill(rectangle);
         public void bounce()
           int ground = 400;   // position of the ground line
           int numberOfBalls = 0;
           myCanvas.setVisible(true);
           ArrayList balls = new ArrayList();
           // draw the ground
           myCanvas.drawLine(50, ground, 550, ground);
           //ex 5.50 (a)
           System.out.println("Type in the number of balls you would like to see bouncing and hit enter");
             numberOfBalls = input.readInt();
             BouncingBall myBall;
          myBall =   new BouncingBall( 100, 0, 24, Color.blue,
                            ground, myCanvas);
            //(b)
            for(int i = 0; i < numberOfBalls; i++)
              //(c) (d)
           Random rg = new Random(255);
            BouncingBall newBall = new BouncingBall(i + 100, 0, 16, new Color(rg.nextInt(255),rg.nextInt(255),rg.nextInt(255)), ground, myCanvas);
            //add the ball to the ArrayList object
           balls.add(newBall);
          for(int i = 0; i < numberOfBalls; i++)
                 BouncingBall ball = (BouncingBall)balls.get(i);
                 ball.draw();
             // make the balls bounce
             boolean finished = false;
             while(!finished) {
              myCanvas.wait(50);           // small delay
              ball.move();
               // stop once ball has travelled a certain distance on x axis
               if(ball.getXPosition() >= 550 )
                   finished = true;
           }//move loop
                 ball.erase();
         }//for loop
       }//bounce method
     }//endof class
import java.awt.*;
import java.awt.geom.*;
* Class BouncingBall - a graphical ball that observes the effect of gravity. The ball
* has the ability to move. Details of movement are determined by the ball itself. It
* will fall downwards, accelerating with time due to the effect of gravity, and bounce
* upward again when hitting the ground.
* This movement can be initiated by repeated calls to the "move" method.
* @version 1.1 (23-Jan-2002)
public class BouncingBall
    private static final int gravity = 3; // effect of gravity
    private int ballDegradation = 2;
    private Ellipse2D.Double circle;
    private Color color;
    private int diameter;
    private int xPosition;
    private int yPosition;
    private final int groundPosition;      // y position of ground
    private Canvas canvas;
    private int ySpeed = 1;                // initial downward speed
     * Constructor for objects of class BouncingBall
     * @param xPos the horizontal coordinate of the ball
     * @param yPos the vertical coordinate of the ball
     * @param ballDiameter the diameter (in pixels) of the ball
     * @param ballColor the color of the ball
     * @param groundPos the position of the ground (where the wall will bounce)
     * @param drawingCanvas the canvas to draw this ball on
    public BouncingBall(int xPos, int yPos, int ballDiameter, Color ballColor,
                        int groundPos, Canvas drawingCanvas)
        xPosition = xPos;
        yPosition = yPos;
        color = ballColor;
        diameter = ballDiameter;
        groundPosition = groundPos;
        canvas = drawingCanvas;
     * Draw this ball at its current position onto the canvas.
    public void draw()
        canvas.setForegroundColor(color);
        canvas.fillCircle(xPosition, yPosition, diameter);
     * Erase this ball at its current position.
    public void erase()
        canvas.eraseCircle(xPosition, yPosition, diameter);
     * Move this ball according to its position and speed and redraw.
    public void move()
        // remove from canvas at the current position
        erase();
        // compute new position
        ySpeed += gravity;
        yPosition += ySpeed;
        xPosition +=2;
        // check if it has hit the ground
        if(yPosition >= (groundPosition - diameter) && ySpeed > 0) {
            yPosition = (int)(groundPosition - diameter);
            ySpeed = -ySpeed + ballDegradation;
        // draw again at new position
        draw();
     * return the horizontal position of this ball
    public int getXPosition()
        return xPosition;
     * return the vertical position of this ball
    public int getYPosition()
        return yPosition;
}

I don't even have to study your code - all I have to do is search the HTML on this screen and see there is no reference to run() or threads. You won't make squat move unless you use threads.

Why am I stuck in a "you are logged out" loop while attempting to reinstall Adobe Creative Cloud ?

Why am I stuck in a "you are logged out" loop while attempting to reinstall Adobe Creative Cloud (ACC)? I am able to log into the Creatrive cloud member portal.
What gives.
Also, I can change my password at the ACC portal.
When prompted to login during installation the loop begins. I enter my username and password hit enter - click whir - and the same prompt reappears.
No email is delivered (not in junk either) when I ask for info on reseting my password the only solution offered in the debilitating prompt.

Are you on a managed network? Please navigate to ~/Library/Application Support/Adobe/OOBE/opm.db and trash it. Launch CC desktop and try to sign in.
Enable user library: http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html.
Note: Please disable anti virus if installed and then try to sign in.
Regards,
Romit Sinha

How to get updated values from the loops while they are running

Hello,
I am having difficulty solving a very basic problem, how to access the updated values from the 'FOR loop' while its running? Basically, the VI I am currently working on calls two sub VIs. Each sub VI has a for loop, and both VIs may or may not run for same number of iterations. My goal is to read the values at each terminal inside the loop of both sub VIs, in the Main VI. I tried to achieve it using Global Variables, but in main VI it displays only the last iteration value from both sub VIs. Could anyone please tell me whrere am I going wrong? Is there any other/better way to achieve this.
I appreciate any input on this issue.
Kudos are (always) welcome for the good post. :-)
Solved!
Go to Solution.

Dennis,
In attached VI, I can see the values changing in the sub VI from the main VI with the numeric indicator whose reference is passed on to the sub VI. Now if I wanted to store or use those values how do I do that? I tried to chnge the indicator to control and read from it (in the attached VI) , but the the indicator updates only once. Tried to create a property node and read the Value from it and it didn't work either.
Thanks in Advance!
-Nilesh
Kudos are (always) welcome for the good post. :-)
Attachments:
main-1.vi ‏8 KB
sub-1.vi ‏9 KB

After activation of atandard business content key figure is not visible

Hi all,
I am trying to implement inventory management scnerio in BW3.5 using screen shot PDF , for this i activate standard business content ( cube : 0IC_c03 ) and activate all its related object . one of my key figure 0RECVS_VAL I want to change its parameter for this when I search this infoobject in Infoobject tree this is not visible
while its present in cube 0IC_c03 ,can anybody tell me for changing in this key figure what can i do???
Thanks and regards
Ankit modi

Hi
Again it install from BI content and do the changes what ever u want by RSD1
Cheers
Edited by: SDN USER on Jun 26, 2008 12:04 PM

Project Server 2010 - Assigned tasks not visible in PWA

Hi,
When I enter an issue on a project site, the assigned issue is not visible in the PWA under Issues & Risks.
Based on this link (http://social.technet.microsoft.com/Forums/en-US/f5abd024-3c9a-47f8-a7cb-7743fafebf2b/project-server-2010-cannot-see-assigned-issues-and-risks) I have tried to solve it however without success.
In the queue jobs I have the following error details:
General
Reporting Wss list sync failed:
ReportingWssSyncListFailed (24018) - 1100. Details: id='24018' name='ReportingWssSyncListFailed' uid='6c8a0779-3c9f-4d25-a81c-04d69d6fce1d' SPListType='2136b7a0-03b9-4547-8b2d-c66497accd08' Error='1100'.
ReportingWssSyncListFailed (24018) - 1101. Details: id='24018' name='ReportingWssSyncListFailed' uid='1573855e-b176-44cc-bf92-8959d167f8fe' SPListType='2136b7a0-03b9-4547-8b2d-c66497accd08' Error='1101'.....................................
Reporting message processor failed:
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='839ed0b8-6b8c-4bd5-bfbe-540349c1f27a' QueueMessageBody='ProjectUID='2136b7a0-03b9-4547-8b2d-c66497accd08'.
ForceFullSync='False'. SynchronizationType='All'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'.
ReportingWSSSyncMessageFailed (24016) - RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.. Details: id='24016' name='ReportingWSSSyncMessageFailed' uid='b0e773af-5cc3-4965-85b3-a4d8050e86f5' QueueMessageBody='ProjectUID='2136b7a0-03b9-4547-8b2d-c66497accd08'.
ForceFullSync='False'. SynchronizationType='All'' Error='RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried.'............................................
Queue:
GeneralQueueJobFailed (26000) - ReportingWSSSync.WSSSyncMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='07edaa28-647c-4dee-974e-06f47e4b4e40' JobUID='899bd048-2c19-4176-bd6c-1b45b8379a40' ComputerName='NLHGOL7FPR' GroupType='ReportingWSSSync'
MessageType='WSSSyncMessageEx' MessageId='1' Stage=''. For more details, check the ULS logs on machine NLHGOL7FPR for entries with JobUID 899bd048-2c19-4176-bd6c-1b45b8379a40.
As I understand this error could be due to a mismatch between the fields that are 'standard' in the project server and fields that are op the project site.
If the reporting database could not sync, will consequently also the issues not be visible on the PWA??
Any suggestions how to solve this?
Regards,
Dirk

Hello,
Yes, if the Issues & Risks are not being synchronised to the Reporting database then this will impact the issues & risks appearing on the PWA homepage reminders web part. See this post on how the data gets to the Reminders web part in Project
Server 2010:
http://pwmather.wordpress.com/2012/07/13/projectserver-active-issues-and-risks-on-pwa-reminders-web-part-ps2010-sp2010-sharepoint/
The error you are seeing is probably caused by the default Issue or Risks columns being edited or removed from the Issues or Risks lists. It might be worth taking a look at this post:
http://pwmather.wordpress.com/2011/06/20/project-server-2010-project-site-default-fields/
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Open PO item is not visible in MD04

Dear Expert,
We have one scenario that one PO contain 3 line item which having Open PO Qty. but for line item 20 we have completed open qty i.e.40 & PR is also there. but it is not showing in MD04 & Also not visible in MIGO while doing GR
so please suggest what we need to do this will be visible.
Regards,
Ishwar

Dear Subhash,
Thanks for your reply
Status of line item is OPEN
Changes has been done in PO & also Version is set with Completed Indicator
Plz suggest
Regards,
Ishwar

Loop while is not visible

Similar Messages

Maybe you are looking for