Lost password on BEFW11S4 version 1

Hi All,
I was in http://192.168.1.1 and I went to the set password place, checked the button, and without setting the password, accidentally clicked "apply". So now I cannot login with the normal username admin passwd admin. Is there any way I can restore it to Factory Defaults or get the password?
-Any help appreciated,
Budgetperson

If you accidentally click on the save option...you can actually look for your reset button...hold it for 30 seconds...let go and then unplug the power outlet and replug it back...try using admin again by typing on the internet explorer 192.168.1.1 hit enter

Similar Messages

  • Lost internet connection BEFW11S4 version 4

    I need help. I have just upgraded the firmware on the linksys. Since I have done that I haven't been able to get internet connection on my two laptops. Only on my desktop I was receiving the connection. Someone told me to restore to the factory settings and reboot the linksys system. I tried to do that and now I don't have internet connection on my desktop either. I went through all the steps to set it up and it says that the rounter is working properly, but I just don't have internet connection. I don't know what else to do. Please help.
    My router is BEFW11S4 version 4

    Hi,
                    Follow the steps to make your router work
    Launch an Internet browser.
    b) On the Address bar, type 192.168.1.1, then hit Enter.
    c) A login screen will appear.
    d) Type "admin" for the password and leave the username blank or empty then hit Enter.
    Go to "Mac address Clone" a subtab of setup tab, click on clone your PC's Mac, then save the Settings.
    After that remove the power from the router and the cable modem, and then after 10 sec replug the power 1st into the modem and then into the Linksys router.
                                  You will be up n running !
    Network Security Administrator (EC Council)
    linksysfirmwares.googlepages.com/

  • Linksys BEFW11S4 version 3.2 need help finding software setup

    Hey i have a wireless access point router its older and i lost the software disk and the support page on here only has firmware ugrades it had a setup wizard but everytime i download it and launch it it brings up a firmware upgrader      the router is the linksys BEFW11S4    version 3.2     if any1 knows where i can find the software to install it to my computer please help me find thanks

    Don't worry if you have lost the disk, you can configure your router manually...You can set-up your router manually by entering it's default ip address, 192.168.1.1, no username and default password is admin...

  • HT6170 lost password id apple and lost recovery key

    I lost password id apple and lost recovery key,how to reset my password

    Do you have another trusted device for two-step verification?
    See:  Frequently asked questions about two-step verification for Apple ID   
    http://support.apple.com/kb/HT5570
    What if I lose my Recovery Key?
    If you lose your Recovery Key, you can replace it any time:
    Go to My Apple ID.
    Select Manage your Apple ID and sign in with your password and trusted device.
    Select Password and Security.
    Under Recovery Key, select Replace Lost Key.
    When you create a new key, your old Recovery Key is no longer usable.
    and
    What if I forget my Apple ID password?
    You can reset it at My Apple ID using your Recovery Key and one of your trusted devices.
    Apple Support can't reset your password for you. To reset your password, you must have your Recovery Key and access to at least one of your trusted devices.
    if you have neither your AppleID password, nor your Recovery Key, nor a trusted device, not even Apple can help you to get access to your account.

  • Is there a backdoor to filevault 2  or possible way to regain access after a lost password?

    Is there a backdoor to filevault 2  or possible way to regain access after a lost password?

    Found this link....
    support.apple.com/kb/HT4790
    ....I hope it helps....

  • Multi Language support for lost password management in OAM

    We are trying to implement lost password management with multi-language support. We have updated lpm_changepwd.xsl for UI changes. Some of the text on the password change screen come for the lpm_changepwd.xsl. How can we have the text on the password change screen in multiple language?
    Thanks.
    Vinay

    Was able to do it by adding new files to the shared folder and updating the style in the lang folder to point to the new files.

  • Confusing lost password form behaviour

    I have a client ecommerce site using the following features of business catalyst:
    a secure zone for customers, and associated registration/login/lost password forms
    a newsletter sign up / (email marketing list subscription form)
    The issue is if a visitor to the website registers their email with a marketing list via the newsletter form, they can then use the 'lost password' feature to trigger a password reset email... which serves no purpose as they are not subscribed to any secure zones in the first place and have no username to log in with.
    This has confused many customers who have only registered for the newsletter, and come back to the site later thinking they have an account who then use the password retrieval form.
    Is this something I can work around? It just seems like a bug with BC - it really shouldn't be emailing a password reset when there isn't a username.
    Extra information: Just for completeness sake I went through the process of:
    registering for a list
    requesting a password reset
    resetting (setting?) the password - resulting in confusion: I can't login, then
    attempting to register an account (which will subscribe me to a secure zone) with that email.
    I was able to create an account but received the message: Your record has an existing password. This will be emailed to you. [******] - has been ignored. Obviously the password is not emailed to me, it emails another password reset link.

    Yes. Ok, let's go through a story in full detail, with URLs
    Customer signs up to newsletter on (only one form on this page) http://www.smittenmerino.com/vip
    Customer comes back at a later date, maybe thinking they already have an account, maybe thinking when they signed up to the newsletter that it was an account.
    Customer goes to login page/page requiring login http://www.smittenmerino.com/account/ and thinks 'oh gosh. what's my password' and clicks the 'forgot password link'
    Customer arrives at the lost password form (only one form on this page) http://www.smittenmerino.com/account/lost and submit their email address successfully
    Customer receives the password retrieval email, (note: the username tag for this email will be sent to them as blank), and depending on their determination, they might click the password reset link and add to their confusion and frustration.
    Step 4. should not be possible, they should receive the error message that there isn't an account with that username/email address.

  • I lost password to enter in time machine

    I lost password to enter in time machine, somebody could be so kind to help me to solve this BIG problem?

    See this User Tip from forum expert Tesserax:
                     AirPort - Regain Access from Forgotten Passwords

  • How can I retrieve a lost password from my computer necessary to install Adobe flash player

    How can I retrieve a lost password from my computer necessary to install Adobe flash player

    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.
    For Snow Leopard and earlier with installer DVD
         Mac OS X 10.6- If you forget your administrator password,
         OS X- Changing or resetting an account password (Snow Leopard and earlier).
    For Snow Leopard and earlier without installer DVD
        How to reset your Mac OS X password without an installer disc | MacYourself
        Reset OS X Password Without an OS X CD — Tech News and Analysis
        How To Create A New Administrator Account - Hack Mac

  • I lost my cs4 me version cd, need a link for download

    I lost my cs4 me version cd, need a link for download

    if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    and activate with your serial number.
    if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

  • Lost password to old iphoto library

    What can I do if I lost the password for an old Iphoto library?
    My new computer wants to upgrade it before it will open.

    What can I do if I lost the password for an old Iphoto library?
    There are no passwords for iPhoto libraries? What are you needing? If you have the iPhoto library on an encrypted disk image then you are in trouble and that has nothing to do with iPhoto - you need system level support for encrypted disk images
    My new computer wants to upgrade it before it will open.
    The library? See above - the Application? Then you need password help for your Apple ID - again that has nothing to do with iPhoto - you click on the lost password link
    ln

  • OAM Lost password confirmation page

    Hi,
    I am working with 10.1.4.2 and need to customize lost password app pages , i have changed lpm_changepwd.xsl for GUI changes ,but not able to figure out how to remove or modify confirmation page post change password . currently , I get "User Application" and your password has been changes with Back button.
    Please provide any detail if anyone has done UI customization.
    regards,
    Tom

    You can use lpm_cr.xsl to customize LPM Challenge response page.
    Harish Jangada

  • Why does 7.0.1 ask for previously saved passwords on last version?

    I installed version 7.0.1 on a pc and I get asked to put in previously saved passwords (on last version)...is this right or am I getting hacked by an imitation Mozilla?

    Hi Edgardo,
    Thanks for your help !!
    Yes, I know it is only I label file. I guess I was too anxious and wasn´t clear, sorry.
    I mean the SM installation is asking for a label  DB2/UDB::RDBMS:DB2/UDB:.
    Which means any version of DB2/UDB , ok ?
    What I was saying is that I only have DB2 LUW medias. Exaclty the version DB2/LUW:V9, which is "DB2 v9.1.0.356".
    What I dont understand is why doesn´t SM 7.0 cannot accept a higher version, as it is asking for DB2/UDB....
    Otherwise I will have to download an older version of DB2, what I wouldn´t like to do, ok ?
    Thanks a lot !
    Enio.

  • Ipad lost password but how to try another password it says go to itunes any help thx jb.

    ipad lost password would like to try another password but it says go to iTunes any help thx jb.

    The following post from you seems to be linked to another thread due to a fault in the forum software:
    stolen iphone
    hi
    the pics I think are in photo stream wen you take pics from ipad don't they automatically go into there also I have a couple more passwords to try but it only says go to iTunes even if I shut it down PLEASE any help Aperiated thx jon.
    If both devices had Photo Stream turned on (and if it was turned on in the iPhone before the photos were taken) they should be in Photo Stream and should go to the iPad. More information at: iCloud: My Photo Stream FAQ

  • Sun McData Intrepid 6064 64-Port Director Switch - Lost Passwords

    I inherited a Sun McData Intrepid 6064 64-Port Director Switch. It's previous netadmin is no longer available. All I can access so far is the serial port as it's default password is intact. I can't access telnet or the web interfaces due to the lost passwords. I've tried all sorts of things from different info in the web, being careful not to erase the config and licenses, but no luck so far. Has anybody had success resetting the telnet/web interface passwords on this switch, or any other McData switch? Thank you!

Maybe you are looking for

  • Opening an adobe form within a form

    I have multiple forms made in lifecycle designer es to order different products. Is there a way I can create a button on one form to open anyone of the other forms and the opend form just add to the second page of the existing form? Say I have Form 1

  • Wont recieve texts/ calls....screen freezes up

    So, in the past 6 weeks I have received 3 replacements thunderbolts  from Verizon because the ones I have wont receive calls or texts...does any one else have this issue...I am also having issues with the screen freezing up. I am truly hating this ph

  • ITunes, iTunes Store Crashing Issues

    When I try to download TV shows I've purchased through the iTunes store, it takes literally days for the downloads. During this time, iTunes repeatedly crashes while downloading, usually after about 5 minutes of file downloading. The download suddenl

  • How Do I Bounce Tracks As Separate Tracks

    I have a project with multiple audio tracks and I want to bounce them to separate files and/or separate tracks on a CD. How do I do this? Thanks in advance.

  • Avi compression

    Hello. I have a problem converting a file to AVI. It is a 4min. video (DV PAL) that needs to be compressed to an under 10mb AVI for e-mail difussion. These people all have PCs, and MPEG4 videos are not compatible. They can only play AVIs, but, of cou