Lotus Traveler sync issue

Our company is syncing Lotus Notes emails, contacts via Lotus Traveler.
Time to time (ones a week) I have to switch off/on my iPhone 3GS as the push method stops to work.
I can still receive emails as soon as I open Mail app on the iPhone but company Contacts for instance are inaccessible until I restart my iPhone.
Anybody same experience? Solution?
Thanks

One detail to add: I have Lotus Traveler 8.5.1

Similar Messages

  • Lotus Notes Traveler sync issues and problems

    No device
    Hello
    I could connect my Palm Pre2 to our company's Lotus Notes Traveler successfully.
    It is not as straight as on iPhone as my colleagues, the only point is to indicate completely the path to the Microsoft Exchange link, like:
    https://mycompany.mylotusname.com/servlet/traveler/Microsoft-Server-ActiveSync
    Then using my lotusnotesID and the Internet Password made it working REAL FINE.
    I could get my mailbox, agenda and contacts exchanged with the pre2, terrific!!!
    Some limitations though:
    1) Tasks and notes are unfortunately NOT WORKING at all.
    2) the calendar does not synchronize more than two weeks in the past, but it seems that in the Pre2, it is a limitation for any Microsoft Exchange server. I have another MS Exchange account, not the lotus one, and the limitation is the same, in the past NOT OLDER than TWO WEEKS!!
    (When i think that my Palm TX, Tungsten2, Palm W, etc, did synchronize 10 years of agenda, this is really sad that a new high tech device cannot make it!! I need to know what i have been doing last year or the year before in my professional life. iPhone sync shows EVERYTHING!!)
    MAJOR PROBLEM IS FOLLOWING
    This worked for about three weeks, and then I started to have a weird problem.
    It started on some received mails, and now it does it on every mail, all mails are shows properly in the mail list in the mail program: received from M.smith, on May 22, "Dear M.XXXX i think  ..." which shows the first words of the mail.
    So top display is ok.
    When i open the mail, it says "Retrieving Mail Text", it loops for 30 seconds back giving an error message and asking to try again. Trying again doesnot retrieve the body of the mail either.
    ==> NO WAY TO READ THE MAIL COMPLETELY!!
    It worked fine for the first three weeks NO PROBLEM AT ALL!!
    I have tried my Lotus Traveler account on an iPod and iPhone using the same MS Exchange configuration, and there
    NO PROBLEM AT ALL.
    So it is in the Palm Pre sync where something goes wrong.
    I reset my PALM completely, and created a brand new user from scratch, reconnected it to the Lotus Traveler account and I got the same error, so it is not a matter of database too large in the Pre2 or something else.
    It is INSIDE the PalmPre synergy sync itself.
    Reading my mail from other sources like Google mail, or from a POP account works like a charm.
    I don't know if someone at HP Webos can do something, but this is a message in a bottle.
    Jame from France

    Hi,
    I don't know what happened, but one of a sudden, on Monday afternoon, everything worked back ok again.
    I was about to show to a friend the famous message "cannot retrieve mail's body", but then the mail's body was retrieved from God knows where and it came direct on my pre screen.
    5 minutes before it didn't work, 5 minutes later it did work.
    I didnot change anything to my profile or pre or my lotus account.
    I just don't understand why this worked again.
    The only difference I can think of, but I am not 100% sure, is that when I "transfer" a mail to someone else; the message I send is truncated generally just after the list of the mail recipients;
    Sorry not to be able to say more than that, but it is weird for me too, how did it come to work?!?
    Rgds
    Jame

  • Nokia E72 - Problem with Lotus Traveler 8.5.1.3

    I have 2 Nokia E72 correctly configured with Lotus Traveler that don't send outgoing the email...
    This is my test and configuration:
    a) Scenario with emails/calendar without contacts to sync
    The devices work perfectly without contacts... ( I receive the emails, and I can send the email, and I can manage the calendar)
    b) After that I sync my 5700 contacts from my Notes Address Book ( are them too much for my device?)
     - First Device - The device don't sync all contacts and I can't send out my email
     - Second Device - The device sync all contacts and I can't send out y email
    In both case the email go into local OutGoing folder...and don't send to the server...
    There are some problem with 5k of contacts on Nokia E72?
    In the Nokia E71 all work correctly ....
    Tnx you

    So why don't you try to sync less contacts, and to see then, whether the problem is solved ?
    Then it already helps you to identify whether or not the issue is related to the number of contacts...

  • Configure Lotus Traveller

    How to configure Lotus Traveller in Nokia E71

    I have done that before on my Pre running webs 1.4.5. I google and followed some instruction on how to manually add email account for notes traveler and it worked for me. From email app, I just added an email account thru manual setup, chose mail type as EAS, provided notes traveler URL, entered user id and password, no need for domain field, then clicked sign in. This created account ok for me. It also automatically sync calendar for me as well. No need to go thru web interface to notes traveler to add it. But I saw my palm device added ok from notes traveler interface.
    HTH.

  • IPhone 3G cannot connect to the Lotus Traveler service on LotusLive Notes

    I have this answer from IBM regarding conection between my Iphone 3G and Lotus Live:
    IPhone 3G and early iPod Touch devices cannot connect to the Lotus Traveler service on LotusLive Notes
    This issue also applies to Lotus Traveler services where the authentication mechanism requires HTTP session cookies as part of its authentication scheme.
    There is a known issue with Apple iPhone 3G and early iPod Touch models running iOS 4 that prevent it from using HTTP session cookies in the Exchange ActiveSync account. If you are using one of these devices that has been upgraded to iOS 4, and you are trying to connect to a Lotus Traveler service that requires HTTP session cookies, such as LotusLive Notes, then the device will fail to connect to the service. After manually configuring the account or installing a profile, when you open the Inbox or other folder in the mail application, you will see the generic error "Cannot Get Mail : The connection to the server failed.".
    Further examination of network traces would show that the Apple device is making its request without the requested session cookie and instead there is a header in the data named X-Bad-iPhone-No-Cookie.
    The IBM workaround is:
    Contact Apple support for a profile that can be installed to enable HTTP session cookies for the Exchange ActiveSync account....
    Does somebody had this issue and how it was solved?

    Try the following steps:
    Plug into iTunes, and click "check for updates." There may be a new network settings file to update (separate from the firmware updates).
    Settings > General > Reset > Reset Network Settings
    Restore as "new iPhone".
    Replace the SIM (from AT&T)
    Make appt. with Apple store "Genius Bar."
    Message was edited by: modular747

  • E6-Lotus Traveler

    I had recently upgraded from E75 to E6.
    My office uses Lotus Notes traveler Mail and my office configured the mail with a old Exe.
    The problem was that when I press the mail button in the phone I do not go to lotus notes traveller.  I have to go to my message option and with thin that there is a folder called lotus inside which I have to select my In-box.  This was rather cumbersome.  My IT told me that the phone has not come with Lotus client preloaded and if they reinstall using the setup mail option once the lotus client is installed, my problem will be solved.
    When I checked with Nokia care, to my greatest surprise, I am told that E6 touted as their business phone does not support Lotus Traveller."We would like to inform you that Nokia E6-00 does not supports Lotus Notes Traveler."  Not something i expected from Nokia.
    Now I am in a fix.  If somebody can suggest a work around that would be great.  Tks in advance.

    Hi venu1974!
    At first, Traveler (my version is 8.5.2.1) workes with the E6 for sync of contacts, calendar items and mail. Anyway there's no support for putting an information on the main screen to get informed about new mails, as there's only a widget for the Nokia Mail. Hopefully Nokia will update the software asap for drect support of Notes I'm just working on with my E72...
    Maybe someone's good programmer and developes a widget for the main screen - everything will be fine.

  • Invite from Lotus Traveler shows wrong time zone

    Question: why is the time zone always showing as Hawaii on calendar entries sent using Lotus Traveler and which I accept on my iPad?
    Here are the facts:
    1.  I am an iCloud user (on my personal iPad and Mac)
    2.  I access work emails/calendar on my work iPad using Lotus Traveler
    3.  I send an invite from my work calendar on my work iPad and accept the invite into an iCloud caldendar on my personal iPad.
    Result:  Invite shows correctly on my calendar on my personal iPad but when I open Calendar on my Mac, the invite will ALWAYS shows as "Hawaii" timezone.
    I've tried all combinations of timezone support on/off etc. The problem also does not present itself if I accept the invite from Calendar on my Mac.
    I've taken alook at the .ics file that is origanlly sent and the TZID is "GMT +10" format as opposed to "Australia/Sydney". If I look at the .ics file on my Mac, it as "Hawaii" as the TZID.
    Do anyone have any ideas?
    There are a few posts of similar issues from a few years ago, but the issue seems to have been resolved in previous OS versions.

    I don't have an anwer to the previous in this thread but I believe a related question. I recently received two invites to meetings from a Lotus Notes v6 user. Each repeated weekly on a Tuesday for 10 weeks and one meeting followed the other. The first posted to iCal perfectly. The second posted a meeting on the Tuesday in the first week at the correct time. The first repeat however posted 24 hours later (not a week later) and then repeat weekly but on the Wednesday (not Tuesday) but at the correct time.
    I have examined the ics script of both meetings. The only difference appears to be that the meeting that posted correctly had DTSTART and DTEND both on the same date (in Universal Time) where as the one that incorrectly posted the repeats the meetings spanned midnight in Universal Time. Are there any patches or ways to fix this. Can I edit the script and then re-post it to iCal so as to "trick" iCal into placing this on the correct day?
    I have copied the header script for the meeting that behave correctly below:
    BEGIN:VCALENDAR
    X-LOTUS-CHARSET:UTF-8
    VERSION:2.0
    PRODID:-//Lotus Development Corporation//NONSGML Notes 6.0//EN
    METHOD:REQUEST
    BEGIN:VEVENT
    DTSTART:20070910T230000Z
    DTEND:20070911T010000Z
    TRANSP:OPAQUE
    RRULE:FREQ=WEEKLY;UNTIL=20080129T010000Z;BYDAY=TU
    DTSTAMP:20070905T004709Z
    SEQUENCE:0
    ATTENDEE;ROLE=CHAIR;PARTSTAT=ACCEPTED
    The header for the script that does not operate correctly for the repeats is copied below:
    BEGIN:VCALENDAR
    X-LOTUS-CHARSET:UTF-8
    VERSION:2.0
    PRODID:-//Lotus Development Corporation//NONSGML Notes 6.0//EN
    METHOD:REQUEST
    BEGIN:VEVENT
    DTSTART:20070910T230000Z
    DTEND:20070911T010000Z
    TRANSP:OPAQUE
    RRULE:FREQ=WEEKLY;UNTIL=20080129T240000Z;BYDAY=TU
    DTSTAMP:20070905T004709Z
    SEQUENCE:0
    ATTENDEE;ROLE=CHAIR;PARTSTAT=ACCEPTED

  • More Aperture/iPad syncing issues

    Each time I create a new project or album in Aperture, I have trouble getting the images to the iPad when I sync. I sometimes need to sync several times until the images are recognized and imported to iPad. I do have the albums designated manually, rather than all, which means I have to sync and then sync again after I check the checkbox for the new album. I understand that, but sometimes I have to go back into Aperture to make sure the previews are updated. If I choose to update the previews for a project, Aperture will usually tell me that they're already up to date, but often they will not show up on the iPad, even after I check the appropriate box for the album in iTunes. Sometimes I get good results if I delete the previews and regenerate them in Aperture.
    The second problem is the sort order. Even if I have "sort by filename" selected in Aperture, they do not show up in this order on the iPad--despite what the support article says about this. They appear to only show up in Date order. I've tried repeatedly resetting the sort order, but it does not change on the iPad. Sometimes I have to delete the album from the iPad, (uncheck the album in iTunes and sync again), then recheck it and sync yet another time. This does not always work, however.
    It is very frustrating. The interface between Aperture and the iPad is very wonky. I often have to sync repeatedly, just to get the photos on the iPad and even then they're usually in the wrong order.
    Aperture appears to have two types of previews: "previews" and "sharing previews," but "sharing previews" don't seem to appear in the documentation. I've noticed that, even when Aperture says the previews are up to date, when I exit the program, it will sometimes (but, maddeningly, not always), give the message, "updating sharing previews" before quitting. I cannot figure out how to force this, however. Sometimes opening and closing Aperture several times will cause it to do this, but I can't be sure.
    iTunes seems to have its own process in which it "optimizes" images for importing to the iPad. Like Aperture's mysterious "sharing previews," "optimizing" does not show up in the iTunes documentation or help files.
    This process either needs to be improved, or at least documented so users can understand how to avoid these problems.

    1. Some people have reported slow syncing with anything but the iPad's own USB cable (e.g. using a US cable from an iPhone/iPod). Try different cables
    2. More work - disable iTunes syncing completely, then re-enable a bit at a time, e.g. one movie at a time, one playlist at a time, one photo album at a time. There are periodic reports of syncing issues caused by a bit of media that's been corrupted, and this (tedious) approach allows you to identify where the problem might be.
    3. If that fails, do a clean restore back to factory settings, then progressively re-enable syncing as above.
    Hope this helps

  • Sync issues after iOS 8 update

    Hi,
    I have an iPhone 5S, 64 GB. After updating to iOS8 I got sync issues. "Waiting for changes to be applied" never disappeared. Also the storage usage in iTunes 11.4 is wrong. iTunes said I had 6GB free, when I had in fact 20GB. I restored the phone back to firmware, restored the backup. All was fine until I made setting changes in iTunes what I want to sync. The same issue in iTunes is back again. I already deleted my voice memos as someone recommended in another threat but that didn't help.
    Any ideas how I can solve the problem, would be appreciated. Thank you!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Disappearing Contacts, Mobile Me Sync Issues, Calendar crash-Answers??

    I'll try to keep this post brief but hopefully it will help provide some possible answers for frustrated users experiencing the random complete wipe out of all contacts and calendar data when syncing with mobile me using either push or fetch. After several weeks of experiencing these random sync issues and spending several hours over several days between tech support calls with iPhone then Mobile Me support and then finally a genius bar appointment where the genius said he didn't have a clue and simply offered to replace my phone.
    The next morning, SAME PROBLEMS... and through it all NO ONE could tell me why my sync was so randomly unreliable. Every other day for no apparent reason, my phone would suddenly lose all contacts and/or calendar data. (A few thousand contacts and two years of calendar data). It was both frustrating and strange—even stranger that Apple techs had no clue why and seemed to think no one else was having this issue.
    I tried everything - complete restores, resets, deleting and re-adding the mobileme account, etc., etc., etc. One tech support person finally said, "good luck..." The others kept handing me off the higher levels of support... until finally they just said "we don't know why this is happening." I was waiting for someone to just say, "Look, we have issues with mobile me, so hang in there and eventually it will work." I can be patient and I still think the iphone is the greatest invention in recent years. But everybody I talked with at Apple seemed to think this should be working flawlessly.
    I also started having a crash on the calendar anytime I tried to see the list view for "all calendars." This was frustrating because that's the best feature of the calendar app!
    I was prepared to just return to syncing with my computer and wait for the software to improve between the phone and mobile me. Finally, last night I tried a few things that seem to be working... and for the first full day, mobile me is actually useful to me today. (my fingers are crossed!)
    Here's what I did.
    1. I minimized the number of calendars I was syncing - I have no idea if this affected the sync, but I was syncing eight calendars, now I'm down to four. (You can easily export a calendar and import those events back into a different calendar.)
    2. I did a complete restore of the phone (not from a back up) and the VERY FIRST THING, I added mobile me and synced only the calendar (set to push.) This cleared up the random calendar crash in list view and also mobile me was pushing data rather reliably. After a few moments my entire calendar was on the phone and worked perfectly. New events were transferred quickly back and forth.
    3. I then chose to sync my contacts through the computer rather than over the air. I fear that the contact sync was somehow messing up the whole communication process between the phone and the cloud. Someone suggested that the number of "groups" in contacts might have an impact on the sync issues as well. I didn't need my contacts to sync with the urgency of "push" so this works for me. Plus I have a lot of contacts and it's just faster over the cable.
    4. I then GREATLY reduced the number of apps on my phone. I originally had about 27 and I only reinstalled 9 of them. I did this ONE AT A TIME - starting with the most necessary and useful... and after each install, I checked the functionality of the calendar and mobile me. No problems. Perhaps I was having an app conflict?
    5. Then I reinstalled the rest of my content - music, podcasts, photos. Still no problems.
    ONE of these steps actually worked, and I'm not sure which one. My guess is that one or more of my apps was conflicting in some way. OR possibly something with the contact sync... but for the last 24 hours the mobile me calendar sync using push has been consistently reliable and useful. (for the record, mobile me email has always worked perfectly for me.)
    No one with tech support ever suggested to me that I could be having an application conflict or any other problems with calendars or contact groups, etc. I've spent many hours on this the past few weeks... and for the first time, my iphone seems to be working with mobile me correctly.
    In reading many of these posts, it seems a lot of others are having similar problems... so hopefully these suggestions might be helpful. If you have any thoughts as to which of these solutions was the correct one, I would be interested in hearing your opinion.
    Thanks!

    Are your Address Book contacts and iCal calendars/calendar events on your Mac synced with your MobileMe online address book and calendar?
    When you say this data is not synced with your iPhone, none of your MobileMe online data is transferred to your iPhone, or after the initial transfer of this data to your iPhone when you first turned contacts and calendars for over the air syncing with your MobileMe account on your iPhone, the data is not kept synchronized with the MobileMe "cloud"?

  • How do I get rid of lip-sync issues with iTunes 10.2.2.12?

    Hi Everyone.
    Firstly, a very Happy Easter!
    I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
    The system stats for my PC are at the bottom of the post.
    The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
    Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
    The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
    I suppose my main questions are:
    Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
    Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
    Is the spec (below) of my PC causing any issues.
    Here's an Easter Egg for anyone able to help!!
    All the best
    BandAidUK.
    System Information
    Time of this report: 4/24/2011, 10:13:44
    Machine name: DEREK
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Computer Corporation
    System Model: Dimension 8300              
    BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
    Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
    Memory: 3326MB RAM
    Page File: 1273MB used, 3941MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
    DxDiag Version: 5.03.2600.5512 32bit Unicode
    Display Devices
            Card name: NVIDIA GeForce 6200 
         Manufacturer: NVIDIA
            Chip type: GeForce 6200
             DAC type: Integrated RAMDAC
           Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
       Display Memory: 512.0 MB
         Current Mode: 1280 x 1024 (32 bit) (60Hz)
              Monitor: Plug and Play Monitor
      Monitor Max Res: 1600,1200
          Driver Name: nv4_disp.dll
       Driver Version: 6.14.0012.6099 (English)
          DDI Version: 9 (or higher)
    Driver Attributes: Final Retail
    Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
          WHQL Logo'd: Yes
      WHQL Date Stamp: n/a
                  VDD: n/a
             Mini VDD: nv4_mini.sys
        Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
    Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
            Vendor ID: 0x10DE
            Device ID: 0x0221
            SubSys ID: 0x02F3196E
          Revision ID: 0x00A1
          Revision ID: 0x00A1
          Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
    Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
             Registry: OK
         DDraw Status: Enabled
           D3D Status: Enabled
           AGP Status: Enabled
    DDraw Test Result: Not run
    D3D7 Test Result: Not run
    D3D8 Test Result: Not run
    D3D9 Test Result: Not run
    Sound Devices
                Description: Creative SB Live! Series
    Default Sound Playback: Yes
    Default Voice Playback: Yes
                Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
            Manufacturer ID: 1
                 Product ID: 100
                       Type: WDM
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                Other Files:
            Driver Provider: Creative Technology Ltd.
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 8000, 96000
    Static/Strm HW Mix Bufs: 64, 63
    Static/Strm HW 3D Bufs: 64, 63
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
                   Registry: OK
          Sound Test Result: Not run
                Description: SoundMAX Digital Audio
    Default Sound Playback: No
    Default Voice Playback: No
                Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
            Manufacturer ID: 65535
                 Product ID: 65535
                       Type: WDM
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                Other Files:
            Driver Provider: Analog Devices
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 100, 192000
    Static/Strm HW Mix Bufs: 33, 32
    Static/Strm HW 3D Bufs: 33, 32
                  HW Memory: 0
           Voice Management: Yes
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: Yes, Yes
    Sensaura(tm) ZoomFX(tm): Yes
                   Registry: OK
          Sound Test Result: Not run
    Sound Capture Devices
                Description: Creative SB Live! Series
      Default Sound Capture: Yes
      Default Voice Capture: Yes
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                  Cap Flags: 0x41
               Format Flags: 0xFFF
                Description: Hauppauge WinTV 88x Audio Capture
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: hcw88aud.sys
             Driver Version: 2.125.28070.0000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/12/2010 09:47:58, 13440 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCC0
                Description: SoundMAX Digital Audio
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCCC
    DirectMusic
            DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
         DLS Version: 1.00.0016.0002
        Acceleration: n/a
               Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                      Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
                      SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                      Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                      Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
            Registry: OK
         Test Result: Not run

    Select *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
    and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
    In List view, you can turn off every column (in menu View > View options) except track name.

  • Having sync issues with Outlook 2011 since upgrading to Mavericks

    Hi All,
    My work Macbook Pro 13" is having issues syncing my inbox and sent mail automatically. It's a hit or miss if I recieve emails in my inbox in a timely mannor with out pressing the Send/Recive button (even when i press it takes minutes to update). My Sent Items can show up an hour later  even if I hit the Send/Recieve button.
    All my mail is there and shows up/syncs on my iPhone quickly. I upgraded to Mavericks right when it came out and have only been having these sync issues for the last week or so.
    I've cleared my mail cache and that didn't work. My calandar reminders and contacts don't seem to have any issues and no other apps have been preforming slow or strangely.... just my VERY important work email. My tech guys are stumped and I wanted to try you guys before they do a major rehaul of my system 
    Thanks!

    A new Outlook Identity will most likely solve your issues. If you have any data under "On My Computer" folders, see this link:
    How to move your data to a new Identity
    BTW, how much free space on your drive? Use Disk Utility in Applications/Utilities to find this info. You need a minimum of 10% free but 15-20% is recommended.
    Outlook gets very sluggish when you are low on disk space. If you have a bunch of older Identities from previous rebuilds you can delete these to help free up space.

  • ICal refuses to finish 'restore' ; trying to resolve sync issues.

    trying to fix sync issues.
    using missing sync.
    everything worked perfectly for a ling long time before i thought it'd be cute to go in and put birthdays into addressbook, and select the option in iCal preferences to add those events to my calendar.
    EVERYTHING has gone to **** since then.
    the missing sync guys recommend i backup and restore addressbook and iCal.
    addressbook did fine.
    when i select the saved ICal database file (icbu) from my desktop, it will not complete.
    what gives?
    i'm trying to do this to fix another problem.
    its like every step is making a new issue.
    i am getting close to the edge guys...
    pleaes help.
    thanks!
    c
    (overall problem is that i cannot even get missing sync to overwrite my blackberry 8830 now.
    for months, iCal, Addressbook, and Tasks synced perfectly.
    all was well until i screwed with this stupid Birthday feature.)
    Message was edited by: clyde c

    also, i've already gone into iSync and cleared sync history....that didnt seem to affect anything.
    thanks in advance for any insights at all.
    c

  • IPhone and Windows 7 64 Bit - syncing issues

    Hi,
    Just wondering if anyone is able to help. I have updated to Windows 7 and am having problems syning my iPhone. It comes up with a multitude of errors but the most common is:
    'The iPhone "Michael's iPhone" can not be syned. The required file can not be found.
    I have restored the iPhone and after it resets, it sits at the Setup Window in iTunes for ages, then clicks over, starts syncing (it is doind that now) but also displays the error. Will be interesting to see if it actually finishes the sync and to see if the apps work on the phone.
    I have also removed iTunes, Quicktime, Mobile App Supprt, Apple Software Updater, Bonjour and reinstalled and still the sync issues coninue. I also ran the diagnostic tool in iTunes on syncing and detecting the iPhone and it reports everything is ok.
    Microsoft Windows 7 x64 Business Edition (Build 7600)
    Gigabyte Technology Co., Ltd. P55-UD6
    iTunes 9.0.1.8
    QuickTime 7.6.4
    FairPlay 1.5.18
    Apple Application Support 1.0
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver 1.45.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number E400D*7E1<Edited by Host>
    Current user is an administrator.
    The current local date and time is 2009-10-23 19:56:37.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 5800 Series
    ** External Plug-ins Information **
    No external plug-ins installed.
    Genius ID: cecad029456cdd284aef514988f34808
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.0.1.8 is currently running.
    iTunesHelper 9.0.1.8 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Texas Instruments 1394 OHCI Compliant Host Controller. Device is working properly.
    Connected Device Information:
    iPhone, iPhone 3GS running firmware version 3.1.2
    Serial Number: 88924**3NS <Edited by Host>
    Most Recent Device Not Currently Connected:
    iPod nano (5th Generation) running firmware version 1.0.1
    Serial Number: YM937**72D <Edited by Host>
    ** iPhone/iPod Touch Sync Tests **
    Sync tests completed successfully.
    I have applied all software updates and the latest chipset drivers for the motherboard. My Nano syncs without a problem. It just seems to be my iPhone.
    I have iTunes installed in the defualt directory on C:\ with the mobile apps etc. Music is located on my E:\
    I am not sure what to do now....

    Well, the new gigabyte bios fixed the issue.

  • Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Hello surig84,
    Thank you for providing the details of the issue you are experiencing when syncing your iPad.  I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Should I Avoid LR4 and Get LR3 Because of My Huge Hierarchical Keyword List?

    I abandoned LR2 several years ago because it crashed from my hierarchical list of 12,000 keywords. (Botanical and common names and other terms.) I have been using CS5/Camera Raw/Bridge to manage and edit my images. The hierarchical list is necessary

  • RMAN: Increment backup very slow

    Hi All, We have Datawarehouse database having size around 7TB. Increment backup performance is extremely poor it is taking approx 14hrs to complete the process. We have also enabled block change tracking but failed to meet target. Below mentioned DB

  • Adobe Air will not update or uninstall

    Trying to update Adobe Air and it will get an error and stop.  Tried to uninstall and that will get an error and stop.  Just says error occurred while uninstalling.  or error occurred while installing.. nothing else.

  • Webdynpro cache

    Hello . I have written the following code to display an image in a webdynpro table cell using image UI with the  cached URL.Please see the code below. It works fine. this is using NW04 IWDCachedWebResource cachedResource = null;      cachedResource =

  • Printing with hp 4620

    I can't seem to hook up AirPrint