Low Resolution
Have anyone notice the low quality pictures on there iPhone from time to using the safari browser and in some apps?
iTarded:
Welcome to the Apple Discussions. Can you give us a little more info on what happened? When did you first notice it? Did you run any software updates before or do anything in the iPhoto Library folder from the Finder?
Where are you seeing the reduced resolution images? When you double click on them in iPhoto? Did you do any importing of an old library into a new library? Sorry for the many questions but there are a number of reasons you might see what you're seeing and the more we know the better we can evaluate your issue.
Similar Messages
-
I guess I squeezed my entire issue into the subject line. lol When I sync my iphone to my laptop I notice that all my address book pics and iphone pics have become lower resolution, even though I started out with the resolution that I really needed to produce decenty address book printouts. I doubt I can correct the losses of resolution that have occurred but can anyone help me figure out how to prevent future losses? Thank you!
Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
'''''Address Bar Search'''''
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
(3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
Does that work?
'''''Search Box'''''
Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
Do either of those work?
There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am. -
I transferred some photos to my iphone via email and they have very low resolution. First I sent them from iPhoto with highest resolution, then I transferred them to my desktop in highest resolution and added them to an email, opened the email and saved to my Camera roll. They all look like low resolution photos.This is the exact method I have used to transfer photos in the past with my 4S and never had a problem. What am I doing wrong? Is this a bad camera? HELP please! Thank you!
My husband has the same phone, we purchased them at the same time. I sent him the same photos in the same email that I downloaded them from and on his phone they show up with the normal higher resolution. Is it possible that there is something wrong with my iPhone or is there a setting that can be changed? I'm still learning to use it. All my other photos are of normal resolution. Does this make any sense to anyone?
Please help!
Deb -
[SOLVED]Terminal at Lower Resolution
Hello,
I am on Arch linux with Gnome (GDM) and I have a question-
1. When there was no Gnome. I couldn't get my resolution to be my native one. That login screen text was huge(resolution was low). Initially it was all good(when I was using nouveau), till I installed nvidia-340xx. If it makes sense. How to know if I have Optimus enabled ? (I didn't follow optimus part of the wiki and I ASSUMED I don't have optimus)My laptop is Toshiba Satellite - A665-S6070
I also did
Tips and tricks
Fixing terminal resolution
Transitioning from nouveau may cause your startup terminal to display at a lower resolution. For GRUB, see GRUB/Tips and tricks#Setting the framebuffer resolution for details.
GNU nano 2.2.6 File: /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 340.76 (buildmeister@swio-display-x86-rhel47-01) Thu Jan 22 12:12:24 PST 2015
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 75.0
VertRefresh 43.0 - 72.0
Option "PreferredMode" "1366x768"
ModeLine "1366x768" 72.33 1366 1414 1466 1526 768 770 775 790 +hsync +vsync Interlace
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1366x768"
EndSubSection
EndSection
/var/log/Xorg.0.log -
[ 418.253]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 418.253] X Protocol Version 11, Revision 0
[ 418.253] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 418.253] Current Operating System: Linux Arch 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
[ 418.253] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08402ce0-a410-4f2d-aa05-6afb4296c9e1 rw quiet
[ 418.253] Build Date: 14 March 2015 06:45:50PM
[ 418.253]
[ 418.253] Current version of pixman: 0.32.6
[ 418.253] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 418.253] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 418.253] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 21 04:56:20 2015
[ 418.290] (==) Using config file: "/etc/X11/xorg.conf"
[ 418.290] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 418.333] (==) ServerLayout "Layout0"
[ 418.333] (**) |-->Screen "Screen0" (0)
[ 418.333] (**) | |-->Monitor "Monitor0"
[ 418.333] (**) | |-->Device "Device0"
[ 418.333] (**) |-->Input Device "Keyboard0"
[ 418.333] (**) |-->Input Device "Mouse0"
[ 418.333] (==) Automatically adding devices
[ 418.333] (==) Automatically enabling devices
[ 418.333] (==) Automatically adding GPU devices
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/TTF/").
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 418.371] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 418.371] Entry deleted from font path.
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 418.371] (==) FontPath set to:
/usr/share/fonts/misc/
[ 418.371] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 418.371] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 418.371] (WW) Disabling Keyboard0
[ 418.371] (WW) Disabling Mouse0
[ 418.384] (II) Loader magic: 0x815d80
[ 418.384] (II) Module ABI versions:
[ 418.384] X.Org ANSI C Emulation: 0.4
[ 418.384] X.Org Video Driver: 19.0
[ 418.384] X.Org XInput driver : 21.0
[ 418.384] X.Org Server Extension : 9.0
[ 418.387] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 418.388] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 418.389] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 418.392] (--) PCI:*(0:1:0:0) 10de:0a75:1179:fd30 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00009000/128, BIOS @ 0x????????/524288
[ 418.392] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 418.392] (II) LoadModule: "glx"
[ 418.403] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 419.025] (II) Module glx: vendor="NVIDIA Corporation"
[ 419.025] compiled for 4.0.2, module version = 1.0.0
[ 419.025] Module class: X.Org Server Extension
[ 419.026] (II) NVIDIA GLX Module 340.76 Thu Jan 22 11:24:42 PST 2015
[ 419.035] (II) LoadModule: "nvidia"
[ 419.035] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 419.099] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 419.099] compiled for 4.0.2, module version = 1.0.0
[ 419.099] Module class: X.Org Video Driver
[ 419.105] (II) NVIDIA dlloader X Driver 340.76 Thu Jan 22 11:03:05 PST 2015
[ 419.105] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 419.106] (--) using VT number 2
[ 419.162] (II) Loading sub module "fb"
[ 419.162] (II) LoadModule: "fb"
[ 419.162] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 419.182] (II) Module fb: vendor="X.Org Foundation"
[ 419.182] compiled for 1.17.1, module version = 1.0.0
[ 419.182] ABI class: X.Org ANSI C Emulation, version 0.4
[ 419.182] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 419.182] (II) Loading sub module "wfb"
[ 419.182] (II) LoadModule: "wfb"
[ 419.182] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 419.184] (II) Module wfb: vendor="X.Org Foundation"
[ 419.184] compiled for 1.17.1, module version = 1.0.0
[ 419.184] ABI class: X.Org ANSI C Emulation, version 0.4
[ 419.184] (II) Loading sub module "ramdac"
[ 419.184] (II) LoadModule: "ramdac"
[ 419.184] (II) Module "ramdac" already built-in
[ 419.195] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 419.195] (==) NVIDIA(0): RGB weight 888
[ 419.195] (==) NVIDIA(0): Default visual is TrueColor
[ 419.195] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 419.196] (**) NVIDIA(0): Enabling 2D acceleration
[ 420.273] (II) NVIDIA(0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 420.274] (II) NVIDIA(0): Vision stereo.
[ 420.274] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 420.292] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:1:0:0 (GPU-0)
[ 420.292] (--) NVIDIA(0): Memory: 524288 kBytes
[ 420.292] (--) NVIDIA(0): VideoBIOS: 70.18.5f.00.12
[ 420.292] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 420.297] (--) NVIDIA(0): Valid display device(s) on GeForce 310M at PCI:1:0:0
[ 420.297] (--) NVIDIA(0): CRT-0
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0) (boot, connected)
[ 420.297] (--) NVIDIA(0): DFP-1
[ 420.297] (--) NVIDIA(0): CRT-0 Name Aliases:
[ 420.297] (--) NVIDIA(0): CRT
[ 420.297] (--) NVIDIA(0): CRT-0
[ 420.297] (--) NVIDIA(0): DPY-0
[ 420.297] (--) NVIDIA(0): VGA-0
[ 420.297] (--) NVIDIA(0): VGA-0
[ 420.297] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- EDID for CRT-0 ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): No EDID Available.
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- End of EDID for CRT-0 ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal LVDS
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0) Name Aliases:
[ 420.297] (--) NVIDIA(0): DFP
[ 420.297] (--) NVIDIA(0): DFP-0
[ 420.297] (--) NVIDIA(0): DPY-1
[ 420.297] (--) NVIDIA(0): LVDS-0
[ 420.297] (--) NVIDIA(0): DPY-EDID-f0d8f39c-e735-531b-2696-7b835139c44d
[ 420.297] (--) NVIDIA(0): LVDS-0
[ 420.297] (--) NVIDIA(GPU-0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- EDID for Seiko/Epson (DFP-0) ---
[ 420.297] (--) NVIDIA(GPU-0): EDID Version : 1.3
[ 420.297] (--) NVIDIA(GPU-0): Manufacturer : SEC
[ 420.297] (--) NVIDIA(GPU-0): Monitor Name : Seiko/Epson
[ 420.297] (--) NVIDIA(GPU-0): Product ID : 0x3641
[ 420.297] (--) NVIDIA(GPU-0): 32-bit Serial Number : 0x00000000
[ 420.297] (--) NVIDIA(GPU-0): Serial Number String :
[ 420.297] (--) NVIDIA(GPU-0): Manufacture Date : 2009, week 0
[ 420.297] (--) NVIDIA(GPU-0): DPMS Capabilities :
[ 420.297] (--) NVIDIA(GPU-0): Input Type : Digital
[ 420.297] (--) NVIDIA(GPU-0): Prefer first detailed timing : Yes
[ 420.297] (--) NVIDIA(GPU-0): Supports GTF : No
[ 420.297] (--) NVIDIA(GPU-0): Maximum Image Size : 350 mm x 200 mm
[ 420.297] (--) NVIDIA(GPU-0): Valid HSync Range : 47.4 kHz - 47.4 kHz
[ 420.297] (--) NVIDIA(GPU-0): Valid VRefresh Range : 60.0 Hz - 60.0 Hz
[ 420.297] (--) NVIDIA(GPU-0): EDID maximum pixel clock : 72.3 MHz
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): Detailed Timings:
[ 420.297] (--) NVIDIA(GPU-0): 1366 x 768 @ 60 Hz
[ 420.297] (--) NVIDIA(GPU-0): Pixel Clock : 72.33 MHz
[ 420.297] (--) NVIDIA(GPU-0): HRes, HSyncStart : 1366, 1414
[ 420.297] (--) NVIDIA(GPU-0): HSyncEnd, HTotal : 1446, 1526
[ 420.297] (--) NVIDIA(GPU-0): VRes, VSyncStart : 768, 770
[ 420.297] (--) NVIDIA(GPU-0): VSyncEnd, VTotal : 775, 790
[ 420.297] (--) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.297] (--) NVIDIA(GPU-0): Image Size : 353 mm x 198 mm
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): 00 ff ff ff ff ff ff 00 4c a3 41 36 00 00 00 00
[ 420.297] (--) NVIDIA(GPU-0): 00 13 01 03 80 23 14 78 0a 87 f5 94 57 4f 8c 27
[ 420.297] (--) NVIDIA(GPU-0): 27 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
[ 420.297] (--) NVIDIA(GPU-0): 01 01 01 01 01 01 41 1c 56 a0 50 00 16 30 30 20
[ 420.297] (--) NVIDIA(GPU-0): 25 00 61 c6 10 00 00 19 00 00 00 0f 00 00 00 00
[ 420.297] (--) NVIDIA(GPU-0): 00 00 00 00 00 23 5c 02 67 00 00 00 00 fe 00 53
[ 420.297] (--) NVIDIA(GPU-0): 41 4d 53 55 4e 47 0a 20 20 20 20 20 00 00 00 fe
[ 420.297] (--) NVIDIA(GPU-0): 00 31 36 30 41 54 30 36 2d 55 30 31 0a 20 00 04
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- End of EDID for Seiko/Epson (DFP-0) ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 420.297] (--) NVIDIA(0): DFP-1 Name Aliases:
[ 420.297] (--) NVIDIA(0): DFP
[ 420.297] (--) NVIDIA(0): DFP-1
[ 420.297] (--) NVIDIA(0): DPY-2
[ 420.297] (--) NVIDIA(0): HDMI-0
[ 420.298] (--) NVIDIA(0): HDMI-0
[ 420.298] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): --- EDID for DFP-1 ---
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): No EDID Available.
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): --- End of EDID for DFP-1 ---
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 420.298] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 420.298] (**) NVIDIA(0): been enabled on all display devices.)
[ 420.298] (II) NVIDIA(0): Frequency information for Seiko/Epson (DFP-0):
[ 420.298] (II) NVIDIA(0): HorizSync : 30.000-75.000 kHz
[ 420.298] (II) NVIDIA(0): VertRefresh : 59.998 Hz
[ 420.298] (II) NVIDIA(0): (HorizSync from EDID)
[ 420.298] (II) NVIDIA(0): (VertRefresh from EDID)
[ 420.298] (II) NVIDIA(GPU-0):
[ 420.298] (II) NVIDIA(GPU-0): --- Building ModePool for Seiko/Epson (DFP-0) ---
[ 420.298] (II) NVIDIA(GPU-0): Validating Mode "1366x768":
[ 420.298] (II) NVIDIA(GPU-0): 1366 x 768 @ 60 Hz
[ 420.298] (II) NVIDIA(GPU-0): Mode Source: EDID
[ 420.298] (II) NVIDIA(GPU-0): Pixel Clock : 72.33 MHz
[ 420.298] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1366, 1414
[ 420.298] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1446, 1526
[ 420.298] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 770
[ 420.298] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 775, 790
[ 420.298] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (II) NVIDIA(GPU-0): Viewport 1366x768+0+0
[ 420.299] (II) NVIDIA(GPU-0): Horizontal Taps 0
[ 420.299] (II) NVIDIA(GPU-0): Vertical Taps 0
[ 420.299] (II) NVIDIA(GPU-0): Base SuperSample x4
[ 420.299] (II) NVIDIA(GPU-0): Base Depth 32
[ 420.299] (II) NVIDIA(GPU-0): Distributed Rendering 1
[ 420.299] (II) NVIDIA(GPU-0): Overlay Depth 32
[ 420.299] (II) NVIDIA(GPU-0): Mode is valid.
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x350":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 350 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 350, 382
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 385, 445
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x400":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 400 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 445
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "720x400":
[ 420.299] (II) NVIDIA(GPU-0): 720 x 400 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 35.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 720, 756
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 828, 936
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 446
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 480 @ 60 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 25.17 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 800
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 490
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 525
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 480 @ 73 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 664
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 704, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 489
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 520
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.300] (II) NVIDIA(GPU-0): 640 x 480 @ 75 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 720, 840
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 500
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.300] (II) NVIDIA(GPU-0): 640 x 480 @ 85 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 696
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 832
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 509
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 56 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 824
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1024
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 603, 625
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 60 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 40.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 840
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 968, 1056
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 605, 628
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 72 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 50.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 856
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 976, 1040
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 637
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 643, 666
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 75 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 49.50 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 816
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1056
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 625
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 85 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 56.30 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 832
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1048
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 631
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 87 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 44.90 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1032
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1208, 1264
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 768
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 776, 817
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (II) NVIDIA(GPU-0): Extra : Interlace
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 60 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 65.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1048
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1184, 1344
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 771
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 777, 806
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 70 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 75.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1048
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1184, 1328
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 771
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 777, 806
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 75 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 78.75 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1040
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1136, 1312
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 769
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 772, 800
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 85 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 94.50 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1072
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1168, 1376
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 769
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 772, 808
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1152x864":
[ 420.301] (II) NVIDIA(GPU-0): 1152 x 864 @ 75 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1152, 1216
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1344, 1600
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 864, 865
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 868, 900
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x960":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 960 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1376
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1488, 1800
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 960, 961
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 964, 1000
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x960":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 960 @ 85 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 148.50 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1344
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1504, 1728
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 960, 961
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 964, 1011
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1328
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1440, 1688
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1066
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 75 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 135.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1296
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1440, 1688
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1066
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 85 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 157.50 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1344
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1504, 1728
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1072
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.302] (II) NVIDIA(GPU-0): 1600 x 1200 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 162.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.302] (II) NVIDIA(GPU-0): 1600 x 1200 @ 65 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 175.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 70 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 189.00 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 75 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 202.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 85 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 229.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1792x1344":
[ 420.303] (II) NVIDIA(GPU-0): 1792 x 1344 @ 60 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 204.80 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1792, 1920
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2120, 2448
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1344, 1345
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1348, 1394
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1792x1344":
[ 420.303] (II) NVIDIA(GPU-0): 1792 x 1344 @ 75 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 261.00 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1792, 1888
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2104, 2456
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1344, 1345
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1348, 1417
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1856x1392":
[ 420.303] (II) NVIDIA(GPU-0): 1856 x 1392 @ 60 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 218.30 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1856, 1952
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2176, 2528
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1392, 1393
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1396, 1439
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1856x1392":
[ 420.304] (II) NVIDIA(GPU-0): 1856 x 1392 @ 75 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 288.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1856, 1984
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2208, 2560
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1392, 1393
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1396, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1920x1440":
[ 420.304] (II) NVIDIA(GPU-0): 1920 x 1440 @ 60 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 234.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1920, 2048
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2256, 2600
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1440, 1441
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1444, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1920x1440":
[ 420.304] (II) NVIDIA(GPU-0): 1920 x 1440 @ 75 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 297.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1920, 2064
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2288, 2640
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1440, 1441
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1444, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "640x350":
[ 420.304] (II) NVIDIA(GPU-0): 640 x 350 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 350, 382
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 385, 445
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "320x175":
[ 420.304] (II) NVIDIA(GPU-0): 320 x 175 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 336
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 368, 416
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 175, 191
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 192, 222
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.304] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "640x400":
[ 420.304] (II) NVIDIA(GPU-0): 640 x 400 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 445
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "320x200":
[ 420.305] (II) NVIDIA(GPU-0): 320 x 200 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 336
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 368, 416
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 200, 200
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 202, 222
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "720x400":
[ 420.305] (II) NVIDIA(GPU-0): 720 x 400 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 35.50 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 720, 756
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 828, 936
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 446
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "360x200":
[ 420.305] (II) NVIDIA(GPU-0): 360 x 200 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 17.75 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 360, 378
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 414, 468
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 200, 200
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 202, 223
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.305] (II) NVIDIA(GPU-0): 640 x 480 @ 60 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 25.17 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 800
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 490
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 525
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.305] (II) NVIDIA(GPU-0): 320 x 240 @ 60 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 12.59 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 328
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 376, 400
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 245
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 246, 262
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.305] (II) NVIDIA(GPU-0): 640 x 480 @ 73 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 664
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 704, 832
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 489
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 520
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 73 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 332
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 352, 416
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 244
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 246, 260
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.306] (II) NVIDIA(GPU-0): 640 x 480 @ 75 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 720, 840
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 500
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 75 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 328
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 360, 420
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 240
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 242, 250
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.306] (II) NVIDIA(GPU-0): 640 x 480 @ 85 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 696
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 832
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 509
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 85 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 18.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 348
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 376, 416
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 240
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 242, 254
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.306] (II) NVIDIA(GPU-0): 800 x 600 @ 56 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 824
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1024
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 603, 625
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 56 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 18.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 412
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 512
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 301, 312
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 60 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 40.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 840
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 968, 1056
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 605, 628
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 60 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 20.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 420
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 484, 528
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 314
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 72 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 50.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 856
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 976, 1040
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 637
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 643, 666
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 72 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 25.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 428
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 488, 520
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 318
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 321, 333
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 75 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 49.50 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 816
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1056
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 625
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.308] (II) NVIDIA(GPU-0): 400 x 300 @ 75 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 24.75 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 408
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 528
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 312
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.308] (II) NVIDIA(GPU-0): 800 x 600 @ 85 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 56.30 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 832
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1048
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 631
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.308] (II) NVIDIA(GPU-0): 400 x 300 @ 85 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 28.15 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 416
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 524
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 315
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.308] (II) NVIDIA(GPU-0): 1024 x 768 @ 87 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 44.90 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1032
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1208, 1264
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 768
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 776, 817
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) Nkarol wrote:
newguy wrote:These commands give no such file or directory
Did you install uvesafb?
Install v86d from AUR
This was my first time installing from AUR so I think I installed it, "pacman -Q v86d" gives me output "v86d 0.1.10-5".
Prepare the system
Remove any framebuffer-related kernel boot parameter from the bootloader configuration to disable the old vesafb framebuffer from loading.
$ grep vga /proc/cmdline
$ grep -ir vga /etc/modprobe.d/
Should return no results. If you do have a vga= option somewhere, you will need to remove it.
It didn't
GRUB
Note: This might not work.
First edit /etc/default/grub commenting the GRUB_GFXPAYLOAD_LINUX=keep line.
Then regenerate grub.cfg via the standard script:
# grub-mkconfig -o /boot/grub/grub.cfg
Did this
Then I also configured the file /usr/lib/modprobe.d/uvesafb.conf: (It wasn't empty) , so yeah. I think I installed it.Is there any other way to check ?
Last edited by newguy (2015-03-21 10:21:29) -
Satellite P500 - Splinter Cell is very slow - low resolution
Hey guys,
I have a Toshiba Satellite P500.
CPU Intel Core2 Quad processor Q9000 (2.0GHz, 1066MHz FSB, 6MB L2 Cache)
Operating System Genuine Windows Vista Home Premium 32bit (includes recovery partition for Windows Vista Home Premium 64bit)
Screen Size 18.4" Widescreen HD+ TruBrite Display (1680 x 945), supports 720p
Memory 4GB DDR2 (2GB + 2GB) (800MHz) expandable to 8GB
Storage 1000GB (500GB + 500GB) (5400rpm) SATA
Graphics ATI Mobility Radeon HD 4650 (2286MB Total: 1GB discrete memory + 1262MB shared memory with ATI HyperMemory technology)
Optical Disc Drive DVD SuperMulti Double/Dual Layer
Now im trying to play games like, Splinter Cell Convictions and things of that sort, apparently, according to the Games website, i meet all the recommended specs. Yet when i play the game its on a very low resolution and all settings set to LOW!
Is anyone else having these problems with there Notebooks?Hi Sammole,
Sine few days I have Satellite P500 too. I have to say its a very great notebook, I love it. The screen is really good and big and in my opinion the best option for games, videos and all other multimedia stuff. Furthermore its equipped with fast CPU and graphic card, ideal for playing games.
All my games running fine so I dont know what happened to you. Make sure that the eco mode isnt active, this will slow down the performance.
Make also sure that newest display driver from Toshiba is installed and latest DirectX version from Microsoft.
Have also a look Splinter Cell homepage. Maybe there is an update (patch) available that can help you. :) -
I'm trying to do a book using Iphoto, but it no longer gives a low resolution warning like it used to in the older versions.
I don't know why it doesn't anymore, (or maybe I have to add it on somehow??) but it makes it difficult to know how much I can
zoom in on a picture and still have it be good printable resolution.
Does anyone know how to resolve this or add the warning to the latest version of iphoto?
ThanksWith iPhoto 9 the low resolution for photos warning has been dropped. The only warning one will get now is for text that has overflowed the text box:
As Larry suggested send a feature request to Apple via http://www.apple.com/feedback/iphoto.html to get it back. That's a big omission in my opinion.
You can determine what your minimum resolution is for your images (if all taken from the same camera) by dividing the pixel dimensions by the size of the larges frame in the book which would be 8.5 x 11. If it's at or above 150 dpi you'll be above Apple's previous resolution warning limit.
OT -
i upload iPhone pics to Shutterfly, which gives me a "low resolution" warning and blurry prints. Does anyone know how to enhance resolution/printing quality of iPhone pictures?
How does iPhoto play a part in this? You're in the iPhoto forum. Shouldn't you be asking your question in the iPhone forum? I'll ask the powers to be to move you question to the iPhone forum.
OT -
i upload iPhone pics to Shutterfly, which gives me a "low resolution" warning and blurry prints. Does anyone know how to enhance resolution/printing quality of iPhone pictures?
iPhone 5How does iPhoto play a part in this? You're in the iPhoto forum. Shouldn't you be asking your question in the iPhone forum? I'll ask the powers to be to move you question to the iPhone forum.
OT -
Why does low resolution warning show when I used a high resolution camera
Hi,
I am just learning about iphoto, and have been uploading photos I took with a 4 mega-pixel camera. I have printed out photos at Kodak printers directly from the camera, and they came out great. However, when I upload the photos to the Mac, then burn them to a CD, and try to print them they come out blurry and have the low resolution warning. Does anyone know why that is happening? Is there a setting that decides the photo quality when pictures are uploaded?
Are the photos I have now "doomed" to be at low resolution?
ThanksThe "share" function actually places a mini-library on the CD so that it can be loaded into another Mac that has iPhoto. Just like in your library, the CD will contain, for each photo, the original "out of the camera" version AND the most recently modified version AND a thumbnail for viewing within iPhoto. Apparently the thumbnail was the one that was inadvertently selected for printing and, of course, the resolution is minimal.
If you want to burn a CD for use on a PC or to give to your favorite photo-finisher, create a folder on the desktop and "File/Export" the contents of the album to that folder. Then, EXIT iPhoto and burn the CD with the contents of the desktop folder. After checking the CD and confirming that all is OK, you can trash that folder. -
HT1044 Low resolution warning in iPhoto 09 but on screen looks great
Hi:
I'm working with Snow Leopard and iPhoto 09. I'm building a book and have added photos. Some of the photos show a low resolution warning.
I'd like to keep them at the size shown in the book. I've increased the zoom on the pages and the photos look crisp and clean. Should I be concerned
about the low res icon then?
OR where do I find dpi info and how do I increase it?
Thanks everyone!
Terri
Here's a sample of the pic:
file://localhost/Users/terrimcreynolds/Pictures/iPhoto%20Library/Originals/2008/ R.%20Back%20to%20Venice/R_623.bmp1 - yes you should be concerned - that is why there is a warning
2 - screens display images at 72 DPI - printing requires at least 150 DPI and 300 API is better
3 - you can not "increase DPI" since it is a mathmatical caculation - Dots Per Inch - Dots (pixels) divided by inches
4 - the solution is to use another photo or to reduce the "zoom" so that the photo does not have a warning
5 -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN -
Low resolution warning with 8Mpixel image?
I've finished a new large size hardcover book, and some of the full page size (landscape) images with have 8 megapixel raw files as sources have low resolution warnings - some, but not all of them. Some of the photos have been edited in photoshop, and none of these have warnings. With the unedited pics, some have warnings, some don't - there doesn't seem to be any specific reason why some of the files have warnings. I haven't tried to actually buy the book, so I don't know what will happen with ordering. But it seems 8 megapixels should be fine for a large book landscape page.
Limnidytis:
What size book and theme are you using? I'm not familiar with the RAW files but remember reading about there's a couple of files that get uploaded, the raw file and a jpg for viewing - something like that. Check and make sure it's the RAW file that's in the book and not the jpg file for viewing. Click on one of the files in the book and type Command-I to bring up the Info window for it. There you'll see the image size size in pixels and file size in KB or MB. As I said I'm not familiar with those files so may be way off on this.
As far as resolution is concerned its the overall pixel dimensions of the file that are important. For example a 3512 x 2338 pixel file will have a resolution of about 585 dpi for a 4 x 6 print. If you expand that to an 8 x 12 print (so we dont have to crop) the resolution will drop to about 292.
A 3512 x 2338 file will give approximately a resolution of 275 if printed at an 8.5 x 11 size or approximately a full page photo in a large book. 275 is sufficient for that size print.
iPhoto will often report the dpi at 72 but the size its looking at may be somewhere around 48 inches for the larger side. This can be seen if you have an editor like Photoshop Elements where you can go in and change the dpi and pixels on a side and see how the size in inches changes.
OT -
Low resolution warning on pics
Hi. I'm new to this iPhoto app and not very good or experienced with photos!! And I need help!!
I received a CD with some pics on whihc I saved to my desktop as .jpg images. I then imported them into iPhoto 6.0.5 and they appear fine. However, when I try to order these pics using iPhoto I get a warning with regard to the low resolution quality of the pics for every size except the 5 x 8cm one. Is there a way to overcome this as I would really like to print these pics? The pic is a 480 pixel by 720 pixel.
Please help me!!
iMac Mac OS X (10.4.8)JMB2007:
Welcome to the Apple Discussions. What print size did your friend print these to? For a 4 x 6 inch print your dpi would be around 120 dpi. That might give you a "fair" print. To see if the size you want in the book will be OK try printing it yourself at that size and see how it looks. However, it may not look quite as good in the book.
That size is pretty small. Ask your friend if he burned the full sized image file and not a reduced size.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
Low Resolution Warning on Calendar Pictures
I am in the process of creating a calendar using iPhoto '08. However, some of the pictures that I have added have a low resolution warning in the top right corner. I have tried cropping the photos, fitting the photo to frame size, zooming out, and reverting the photo to the original copy (all the things they told me to do on the Apple website), but the yellow yield signs are still not going away. Is there any way to fix this without resorting to "fitting the photo to frame size"? TIA!
Welcome to the Apple Discussions. What are the pixel dimensions of the photos you are using?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete. -
I have the Nikon D80 and have it set to fine and large file format and can't seem to enlarge bigger than an 8 x 12. Is Aperture possibly compressing the files somehow, or changing the mega pixels when I export the photo?
What are the pixel dimensions of the Image? What do you mean by " ... can't seem to enlarge bigger than ..."? Are you printing? exporting? Using what settings?
Fwiw, the first bullet point from the guidelines on this page in the User Manual is likely apposite:
Printing Tips
Here are a few suggestions to help you with the printing process:
Use the highest-resolution image possible: It’s preferable to work with images imported directly from your digital camera. However, even images imported directly from your camera or card reader can be low-resolution, low-quality images. This is why it’s important to shoot with the highest-resolution settings available on your camera. Compression settings applied during image capture may be apparent when you print. Consider shooting RAW files if the setting is available, and shoot at the highest bit depth possible.If you’ve imported an image that was reduced or compressed in another application, Aperture cannot increase the resolution of the file. In other words, Aperture cannot replace image information that was previously removed during the compression process. If possible, locate the original full-resolution image file, use the Lift and Stamp tools to apply the adjustments you’ve made to the low-resolution file, and print the higher-resolution image file.
Use a printer that supports 16-bit printing: If the image you’re printing is a high-resolution 16-bit file, using a printer that supports 16-bit printing results in smoother gradations.
Color calibrate your Aperture system: It’s important to calibrate your display and printer so that your printed images look as much as possible like the images you see on the computer screen. For more information about color calibrating your Aperture system, see Calibrating Your Aperture System. -
I have the "open in low resolution" box checked by default and I can not uncheck it because it is shaded out. I already tried the "uninstall Acrobat, delete the 'com.adobe.PDFAdminSettings.plist' file, and reinstall" solution, but it did not work. I am using Adobe CS6, acrobat pro 10.1.10, macbook pro w/ retina display, and OS X 10.9.4.
I don't think Acrobat 10 is capable of that. Only the very latest Acrobat 11 update has some concessions for Retina displays.
-
When using my new ipad 4 retina display when on the Internet many of the images are blurry or low resolution? But if you go on apples website everything is crystal clear?? Why is this?
Ebay images look fine on mine. Image zoom doesn't work, but that's not suprising. I also support a number of public and private websites wth a number of images (some pretty large). Those look fine as well. If the Apple website looks good, there is no raeson other sites shouldn't as well.
For eBay specifically, I'd recommend using its app, but in general, you could try a reset: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
Maybe you are looking for
-
I've been using my studio set up for weeks without any problems. Today I came back to the computer, pushed play, no audio can be heard, only a high pitched frequency, then a message, "error while trying to sync midi and audio." I've tried opening new
-
IMovie '13: Import window does not open
I can't get the Import Window to open. (Sure it worked the first time I tried) Anyone with same problem? Anyone with a possible solution? No matter if I press Import in the toolbar or use the menu (cmd I) the main window will dim, but the overlaying
-
No access on podcast share from Windows clients
Hello together! I have the following scenatio at home: * 1 Server with Windows 2008 R2 with logged in user and iTunes running (everything is shared) * 1 Laptop with Windows 7 x64 & iTunes * 1 Desktop with Windows 7 x86 & iTunes * 1 Macbook with Mac O
-
Why is the battery so unstable in the new ios 7.0.2 on iphone 5
The battery in the statusbar is unstable, it can jump from 20% to 10% to 1% and stay there in like an hour.
-
How to use live type in motion 4
how to use live type in motion 4