LR 4.2 causes complete system shutdown during install OSX

Mountain Lion 10.8.2
27" imac
Installing upgrade casues shutdown to black screen followed by a gray crash message, stating the system crashed. System restarts to desktop and crash reporter window. The installer is the only thing open when thus occurs.
Help!!

Just heard back from the engineer.  After analyzing the crash report, it looks like the culprit is WDSmartWare.  This is an app installed by Western Digital.  A quick web search returned numerous reports of issues running that program on 10.8. 
Can you check if this app is running on your system?  If it is, quit or disable it, then try installing Lightroom 4.2 again.
Becky

Similar Messages

  • Error: 3816: Local System Creation during install was not successful.

    Hello,
    This is our first time installing Oracle Wokflow 2.6.3 Standalone.
    We are having problems with the Event Manager.
    When we access the event manager pages:
    … pls/wf/wf_event_html.listevents?resetcookie=T
    …pls/wf/wf_event_html.listsystems?resetcookie=T
    etc.
    We get this error:
    Error: 3816: Local System Creation during install was not successful. Please review the install log file for errors.
    Error Stack:
    WF_EVENT_HTML.isAccessible(EVENTS)
    WF_EVENT_HTML.ListEvents()
    •     The installation was successful.
    •     We cannot change the Local System in the Global Workflow Preferences option.
    •     The table WF_systems is empty.
    •     Should the local system appear in this table?
    Thanks

    Software component sap.com/LM-TOOLS with version 7.00.9.3 is found on the system but in the stack it is listed with version 7.00.9.0.
    Software component sap.com/SAP-JEECOR with version 7.00.9.1 is found on the system but in the stack it is listed with version 7.00.9.0.
    You are trying to upgrade a system with the lower version of sap.com/LM-TOOLS and sap.com/SAP-JEECOR. The other thing I notice is that if you are upgrading to  EhP4/EhP1 NW then the version of LM and SAP-JEECOR should look something like 7.01.3.0.
    Are you using MOPZ to download EhP's ? As the error message says synchronize the system with SAP Solution Manager and then generate a new stack file.
    Hope this helps.
    Thanks,
    Naveed

  • System shutdown during support package import

    We were importing a BASIS support package in our system. Then for other reasons the system shutdown in the IMPOR_PROPER phase so...the system now is corrupted.
    We try to launch the import of support package again from SAP GUI but we can not, a dump is generated everytime.
    Are there a posibility of launch the import from operating system to finalice the aplication of package?what are the commands to do that?
    We try to avoid the recovery from backup
    Regards

    Hi,
    I don't  think it is possible other than backup restore.
    But already you are at worst case..i will suggest you to check the data in PAT01 and PAT03 tables at database level.
    And delete all the contents from those tables then retry to login.
    *Open a support message
    Regards,
    Nick Loy

  • Help needed: system crash during instalation of security update 2008-003

    after beginning instalation of security update 2008-003, at the "optimizing system stage", the computer started heating up (to extreme levels) and became stuck completely - except entering and leaving sleep mode when i shut the lid, there is no response i can get.
    what can be the reason of this and what can i do about this?

    Welcome to the Forums.
    Did you repair disk and permissions, before doing the Security Update?... If not.
    Boot from Install Disc,and select your language. From the Menu Bar Select Utilities>Disk Utility
    After selecting your Mac OS X Repair Disk and reboot.
    Then, from Applications>Utilities>Disk Utility, Repair Disk Permissions.

  • Nstalling Windows Home Server 2011 on a ProLiant ML350e Gen 8 Server (Nothing appearing in Operating System Selection During Install)

    We just purchased Windows Home Server software that required a new server to be purchased. We went with the ProLiant350e Gen8 Server. IUpon starting up the new ProLiant server I booted from CD-Rom and got to the Windows Install program. I clicked  "Install
    A New Server" However, as soon as this page loads it gives me an error that says "Load Driver" "A required CD/DVD Drive Device Driver is Missing. If you have a floppy disk, CD, DVD, or USB flash drive, please insert it now." It gives
    me the option to browse or click okay. Browse only brings up the (x:) Boot drive and VID. It doesn't find the driver in VID Than if I click okay it gives me a message that says "No Device Drivers were found. Make sure that the Installation media contains
    the correct drivers and then click ok" I have tried to use smart provisioning but this fails as it cannot recognise the media from the DVD drive.
    Thanks in advance,

    You should use HP smart start DVD to install the Windows Home Server. If you are booting directly from the Windows DVD it would some times not detect the drivers because of the hardware compatibility issue. You should contact the the vendor and seek help
    from him.
    http://www.arabitpro.com

  • System freeze during shutdown

    I have noticed a couple of times that during shutdown immediately when plymouth kicks in the system just freezes. It is not leaving behind any logs. And it does not occur often. I use kde 4.4 rc2 from kde-mod. But this occurs after kdm quits and plymouth kicks in.
    Anyone else facing the same issue? Any ideal how I can debug this?

    Welcome to Apple Discussions!
    To follow on from the advice re ensuring the driver is the latest version before attempting any other fix, if the problem continues, it is by far better to have the system shutdown gracefully by pulling the USB connection than to shutdown by removing power! At worst, disconnecting the USB cable would do no more than cause problems to the system's printer setup files or print queues, but disconnecting the power COULD cause significant damage to directory and file structure on the hard drive, and actually result in the system being unable to boot.

  • Safari causes system freeze during page load

    Description:
    I've been trying to figure this one out for a while now (about 2 weeks), without any luck. I've tried reading a couple of threads describing similar problems, but it looks like I've got something else going on here seeing as it affect the entire system. I appreciate any suggestion!
    When a window in Safari is open and you're loading a page, it sometimes (almost always) causes a system freeze. Any action performed on any input device within OSX while a page is loading gets delayed by 5-20 seconds. Anything from right-clicking, to opening a new tab in Safari, to navigating to a new folder in Finder.... literally anything. The actual loading of the page is also affected by this. So when I click a link, the page becomes white and the system stalls. After X seconds, the system resumes and the page is displayed fully loaded. Once the page is loaded, everything is back to normal. I can just leave the Safari-window open without anything happening. It's just during the loading of a page.
    Using the mouse to move and switch between open windows are the only actions I seem to be able to perform during the system freeze.
    When it doesn't cause a system-wide freeze, it will still take forever for any page to load. Which isn't a problem in any other browser and I've never had any speed issues in general on any device.
    What I know for sure is that I can solve the problem by closing all open Safari-tabs and windows or closing the app completely, and use Chrome instead. But I do like Safari, so I hope there's another way to fix this.
    I should also note that I've made no changes to the system for many weeks now, other than installing whatever updates might have been available on the App Store.
    What I've tried within Safari:
    - program restart
    - reset settings (every option checked)
    - disable and remove extensions (only had one installed, LiveReload for Adobe Brackets)
    - empty cache
    - delete cookies
    What I've tried within OSX:
    - system restart
    - complete OSX-recovery
    - activity monitor (CPU, HDD and RAM always within normal values during all of this)
    - checked HDD (successfull)
    - checked internet-connection (got 50Mbit/s connection, no speed issues, checked on multiple devices)
    - tried other browsers (Chrome (OSX) and IE (Win 7, Parallels) both run smoothly)
    - turned off IPv6 in terminal (based on a suggestion here at the forums)
    - disabled iCloud-sync
    - disabled Dropbox
    - probably a couple of other things i can't remember right now

    So... I finally fixed it.
    In addition to the things I mentioned I tried, I also checked if it could be malware-related. It wasnt. I then checked if it was just affecting my user-account or OSX globally. I created a new account and Safari ran perfectly. I therefore assumed it had to be something in my library-folder.
    I deleted just about any mention of Safari in the Library-folder (the visible one) and just to be absolutely sure, I deleted the Contents-folder inside Safari.app in the Applications-folder. I then downloaded and installed Safari 7.0.3. Everything runs smooth now.

  • IDVD encoding causes system failure during burn process

    I have iDVD 5 on my work computer (dual 2.7Ghz G5 / 2.5 G RAM), and have burned successfully before my current project.
    My current project has a 28:45 movie and I have tried two different themes with different combinations of drop zones (one with the movie as the drop zone and one with stills only) and everything previews okay, but when I start the burn process it will get to a certain point in the encoding and then the whole system crashes. I come back to check on the process, and my screen is filled with black squares with error info in it... (looks like a DOS screen or something) and it says something about system failure and that I need to restart my computer.
    I'm so stubborn that I keep trying different combinations of possibilities but I'm having no luck. The movie that it's hangin up on was captured in Final Cut Pro from a VHS, edited in Final Cut to trim the excess black, and exported as a Final Cut Movie that I imported into iDVD.
    As I said above, I have burned successfully on this computer and this iDVD, so the fact that this one project refuses to burn is perplexing.
    any thoughts?

    A gap in video would be a space between one clip and another. This is a problem when you are editing your footage, not capturing it. In other words, it is a user introduced problem.
    In FCP when you say "Ignore Timecode Breaks" it just means to continue capturing video even if there is a timecode break. If you do not select this option, FCP would immediately stop catpturing whenever it hit a timecode break. A timecode break is not the same thing as a gap you create during editing. A timecode break could be as simple as rewinding your camera footage and then recording over it... the timecode now has a break because it is not continuous timecode, it jumps from one timecode to another.
    Depending on what device you are capturing from, your audio may come in a few frames before or after the video. This would be especially true for a non-controllable device. It is a simple fix to adjust this as you would have noticed any sync issues right in the timeline during playback.
    A system reboot in the middle of encoding is a serious crash... I doubt if it is the footage per se that is causing this to happen. Footage has been known to force an application to abort a process (or stay in an infinite loop), but an actual system shutdown would be extremely rare.
    Consider recapturing the footage into a new FCP project and then creating a new iDVD project for it, this will eliminate either a corrupted FCP file or an iDVD project from the equation. Also, are you burning directly to disc or are you preparing a disc image? I'd go with the disc image approach because you can test your final build that way.

  • HT1926 After installing the lates version of iTunes, a bubble pops up and says, "iTunes installation complete, Error occured during installation before iTunes could be configured. Your system has not been modified.." How do I correct this?

    After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
    iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
    I did this, but this bubble keeps appearing. What do I need to do?

    Hello there, glenkram.
    The following article outlines great steps to try for troubleshooting your very issue:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Error has occured during install before the requested operation for i tunes could not be completed your system has not been modified

    error has occured during install before the requested operation for I tunes could be completed  Your system has not been modified to complete the install run the installer again and I have it still won't work

    See:
    Trouble installing iTunes or QuickTime for Windows

  • My Apple G5 using operating system 10.6.8 keeps locking up. I get no warning or error message. I do get some intermittent screen distortion. Any ideas as to what could be causing this and how i get rid of this problem? Complete system re - install? N

    My mac keeps locking up it s Power mac G5 Intel using 10.6.8 OS.X. I get no warning or error messages it just locks up and the only way to get it to work again is to depress power button and restart. Its random intermittent and incredibly frustrating. I do get some screen distortion from time to time and wondered whether it may be a graphics card issue or whether it could be solved with a complete system re-install and OS upgrade?

    According to everymac.com, your Mac came with Tiger, 10.4.x and can't go any higher than Lion, 10.7.x.
    It would have come with gray, machine specific disks. Since there's no reason to install 10.4.x first, and then Snow Leopard over that, just purchase a retail copy of Snow Leopard for $20. What you won't get with the retail version of SL is the iLife suite (Garage Band, iDVD, etc.) that were on the original bundled disks, but you can purchase iLife on Amazon pretty cheap, and get newer versions besides.
    When you get Snow Leopard, you can boot to the DVD, erase the drive and install everything clean. Hopefully, you issue is only software, and not hardware related.

  • I am unable to sync photos to iPad. My computer shutdown during the photo optimisation process

    I am using the latest software and updates on both my iPad 2 and windows 7 32 bit laptop. I have reinstalled the latest edition of iTunes, and yet I still cannot do a synch to my iPad 2 as the computer shutdown during photo optimisation.
    I have even reinstalled windows so there is nothing else I can think of.
    Does anyone know how I can get photos on my iPad without making windows shutdown... It's driving me mad. Seems to be ok with my iPod and iphone4, it's just the iPad that's causing the trouble. Help me PLEASE!!!

    Do you mean crashes (as in some software problem) or turns off completely (hardware issue) ?
    If it's crashing then it's a different problem and you'd be better starting a new thread. If it's hardware then the same things apply as have already been mentioned above.
    It's clear that iPhoto (at least the Mac version, I don't use Windows) puts a lot of load on the processor - more than most people ever do at other times. If the thermal management is not up to scratch, the processor will overheat, and the machine will just switch off without warning. I agree it's "rather annoying" In programming terms it's the right thing to to, run parallel threads and fully utilise the resources available - you don't worry about overheating the processor since that should not happen in a properly designed and built system.
    So check your BIOS settings to make sure any settings there are correct. If the machine is still under warranty then take it back to the supplier and tell them the thermal management isn't right. Other than that, you may have to start investigating the hardware - is the heatsink and fan up to the job, is the headsink properly mated to the processor, and so on. I'd not suggest getting into this yourself unless you know what you are doing - find someone that does since it's easy to make matters worse.
    As I mentioned above, at first I was doing photos in small batches (or or two events or folders at a time) and allowing the processor to cool down in between (you need a utility that will tell you the core temperature to do this). This is a right PITA though. Then I found there is a utility in Apple's dev tools for turning off cores for testing - turning off a core made things run more slowly but meant that the processor didn't overheat and I could just leave it. It may be worth looking in your BIOS and/or OS to see if there's something similar - or a means of turning down the clock speed.

  • System shutdown instead of hibernate (Safe Sleep)

    After upgrading to Mavericks I've been having problems with hibernation (Safe Sleep) not working, and instead causes a full shutdown that's hard to re-power back on. I have the problem on my own rMBP and my father's Macbook Air.
    I have trouble getting it powered on after such a shutdown. I have to connect it to power and/or perform the 4 finger SMC reset.
    I worked around the problem by disabling standby and autopoweroff with pmset (sudo pmset -a standby 0 -a autopoweroff 0), as it's the standby timeout which triggers the hibernation-turned-shutdown. I would however have preferred a proper switch to hibernation, so it does not run down the battery to nil if I forget to shutdown before a lengthy away.
    If I 'sudo pmset -a standbydelay 60 -a standby 1' to test/repro the problem - the system does indeed shutdown completely to the difficult to re-power state after 60 seconds inactivity - no hibernation.
    Is anyone else seeing this behavior?

    I resolved my problem -shutdowns instead of hibernate.
    It was caused by rEFInd, an EFI Boot Manager (http://www.rodsbooks.com/refind/)  that prevented proper hibernation with its default installation.
    By installing it on a separate partition instead of default on OS X Boot Volume, hibernation started working as it should. http://sourceforge.net/p/refind/discussion/general/thread/8bd60a7b/

  • Virtual Machine crashing all the time: The previous system shutdown at a certain date was unexpected

    Hello,
    I've a build node that is constantly crashing and rebooting. 
    When I go to system event log I'm not able to identify the reasons for such behavior.
    For instance regarding the machine latest crash I can see: The previous system shutdown at 10:24:57 on ‎27-‎02-‎2015 was unexpected.
    But when I try to find some entry corresponding to that time i see none!
    System:
    * Information 27-02-2015 10:25:53 Kernel-General 12 None
    * Information 27-02-2015 10:22:50 Service Control Manager 7036 None
    Application:
    * Information 27-02-2015 10:26:05 User Profile Service 1531 None
    * Information 27-02-2015 10:21:11 ClearCase 1024 View
    I ran the MiniToolBox to get a comprehensive list of errors that I'm having in this machine and hoppe that you can help me, pleaseeeee...
    MiniToolBox by Farbar  Version: 30-11-2014
    Microsoft Windows 7 Enterprise  Service Pack 1 (X64)
    Boot Mode: Normal
    ========================= Event log errors: ===============================
    Application errors:
    ==================
    Error: (02/27/2015 10:27:54 AM) (Source: WinMgmt) (User: )
    Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 02:29:00 AM) (Source: WinMgmt) (User: )
    Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
    System errors:
    =============
    Error: (02/27/2015 10:26:07 AM) (Source: Microsoft-Windows-GroupPolicy) (User: NT AUTHORITY)
    Description: The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following: 
    a) Name Resolution failure on the current domain controller. 
    b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
    Error: (02/27/2015 10:26:05 AM) (Source: NETLOGON) (User: )
    Description: This computer was not able to set up a secure session with a domain
    controller in domain PT-RD due to the following: 
    %%1311
    This may lead to authentication problems. Make sure that this
    computer is connected to the network. If the problem persists,
    please contact your domain administrator.
    ADDITIONAL INFO
    If this computer is a domain controller for the specified domain, it
    sets up the secure session to the primary domain controller emulator in the specified
    domain. Otherwise, this computer sets up the secure session to any domain controller
    in the specified domain.
    Error: (02/27/2015 10:26:04 AM) (Source: EventLog) (User: )
    Description: The previous system shutdown at 10:24:57 on ‎27-‎02-‎2015 was unexpected.
    Error: (02/27/2015 02:27:28 AM) (Source: Microsoft-Windows-GroupPolicy) (User: NT AUTHORITY)
    Description: The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy
    has succesfully processed. If you do not see a success message for several hours, then contact your administrator.
    Error: (02/27/2015 02:27:26 AM) (Source: NETLOGON) (User: )
    Description: This computer was not able to set up a secure session with a domain
    controller in domain PT-RD due to the following: 
    %%1311
    This may lead to authentication problems. Make sure that this
    computer is connected to the network. If the problem persists,
    please contact your domain administrator.
    ADDITIONAL INFO
    If this computer is a domain controller for the specified domain, it
    sets up the secure session to the primary domain controller emulator in the specified
    domain. Otherwise, this computer sets up the secure session to any domain controller
    in the specified domain.
    Error: (02/27/2015 02:27:25 AM) (Source: EventLog) (User: )
    Description: The previous system shutdown at 02:26:03 on ‎27-‎02-‎2015 was unexpected.
    Error: (02/26/2015 08:57:10 AM) (Source: NETLOGON) (User: )
    Description: This computer was not able to set up a secure session with a domain
    controller in domain PT-RD due to the following: 
    %%1311
    This may lead to authentication problems. Make sure that this
    computer is connected to the network. If the problem persists,
    please contact your domain administrator.
    ADDITIONAL INFO
    If this computer is a domain controller for the specified domain, it
    sets up the secure session to the primary domain controller emulator in the specified
    domain. Otherwise, this computer sets up the secure session to any domain controller
    in the specified domain.
    Error: (02/26/2015 08:56:49 AM) (Source: Service Control Manager) (User: )
    Description: The Serviço McAfee Framework service did not shut down properly after receiving a preshutdown control.
    Error: (02/25/2015 11:46:47 AM) (Source: NETLOGON) (User: )
    Description: This computer was not able to set up a secure session with a domain
    controller in domain PT-RD due to the following: 
    %%1311
    This may lead to authentication problems. Make sure that this
    computer is connected to the network. If the problem persists,
    please contact your domain administrator.
    ADDITIONAL INFO
    If this computer is a domain controller for the specified domain, it
    sets up the secure session to the primary domain controller emulator in the specified
    domain. Otherwise, this computer sets up the secure session to any domain controller
    in the specified domain.
    Error: (02/25/2015 11:46:45 AM) (Source: EventLog) (User: )
    Description: The previous system shutdown at 11:45:21 on ‎25-‎02-‎2015 was unexpected.
    Microsoft Office Sessions:
    =========================
    Error: (02/27/2015 10:27:54 AM) (Source: WinMgmt)(User: )
    Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 02:29:00 AM) (Source: WinMgmt)(User: )
    Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
    CodeIntegrity Errors:
    ===================================
      Date: 2015-02-11 18:03:17.169
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-11 17:50:22.246
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-10 18:04:17.899
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-10 09:43:55.630
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-09 19:24:39.416
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-09 18:23:59.507
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-09 18:08:08.200
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-09 17:54:14.784
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-09 17:45:34.193
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-09 17:23:19.617
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
    =========================== Installed Programs ============================
    Cloud Services WMI Provider (HKLM-x32\...\{DA507693-A089-4D66-B88F-C468AE658FE5}) (Version: 1.1.5464.28193 - Spiceworks)
    CRT-71 (x32 Version: 1.00.0000 - IBM) Hidden
    GSKit8 SSL 32-bit (x32 Version: 8.0.50.16 - IBM) Hidden
    IBM Installation Manager (HKLM\...\IBM Installation Manager) (Version:  - )
    IBM Rational ClearCase (HKLM-x32\...\IM-com.ibm.rational.clearcase.nt_i386) (Version:  - )
    InstallAnywhere 2012 (HKLM-x32\...\InstallAnywhere 2012) (Version: 14.0.0.0 - Flexera Software LLC)
    McAfee Agent (HKLM-x32\...\{EBF3D65F-011E-44D2-8F4F-C74B52682EDD}) (Version: 4.8.0.1500 - McAfee, Inc.)
    Microsoft .NET Framework 4.5.2 (HKLM\...\{92FB6C44-E685-45AD-9B20-CADF4CABA132} - 1033) (Version: 4.5.51209 - Microsoft Corporation)
    Microsoft .NET Framework 4.5.2 (Version: 4.5.51209 - Microsoft Corporation) Hidden
    Microsoft Silverlight (HKLM\...\{89F4137D-6C26-4A84-BDB8-2E5A4BB71E00}) (Version: 5.1.20913.0 - Microsoft Corporation)
    Microsoft Visual C++ 2005 Redistributable (HKLM-x32\...\{710f4c1c-cc18-4c49-8cbf-51240c89a1a2}) (Version: 8.0.61001 - Microsoft Corporation)
    Microsoft Visual C++ 2005 Redistributable (x64) (HKLM\...\{ad8a2fa1-06e7-4b0d-927d-6e54b3d31028}) (Version: 8.0.61000 - Microsoft Corporation)
    Microsoft Visual C++ 2005 Redistributable (x64) (Version: 8.0.59192 - Microsoft Corporation) Hidden
    Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17 (HKLM-x32\...\{9A25302D-30C0-39D9-BD6F-21E6EC160475}) (Version: 9.0.30729 - Microsoft Corporation)
    Microsoft Visual C++ 2010  x64 Redistributable - 10.0.40219 (Version: 10.0.40219 - Microsoft Corporation) Hidden
    Microsoft Visual C++ 2010  x86 Redistributable - 10.0.40219 (x32 Version: 10.0.40219 - Microsoft Corporation) Hidden
    microsoft.vs6 (x32 Version: 1.00.0000 - Your Company Name) Hidden

    Hi JoseRebelo,
    According to the title ,do you mean the host machine will reboot when we start the virtual machine and the virtual machine will crash or just the virtual will reboot ?Have you got a BSOD(Blue screen) ?
    Did the issue occur before ?Have you installed any third party software recently ?
    Please ensure the host machine has got the latest updates.
    I suspect there may be a third party conflicts here.
    Please try clean boot to have a troubleshoot .
    How to perform a clean boot in Windows
    http://support.microsoft.com/kb/929135
    If the issue occured recently ,we can try to perform a system restore to recover the machine to a previous point ot have a check.
    Best regards

  • "F11 System Recovery" during boot does not work after Cloning hard drive.

    Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
    HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
    Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
    Startup Menu (F11 System Menu works properly) only on original hard drive.
    Following obtained from Disk Management & diskpart in Command Prompt.
                                     GPT Disk <700GB>
    Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
    Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
    Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
    Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
    Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
    Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
    Partition 7 NTFS Primary 26MB/350MB [Recovery]
    Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
    I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
    Acronis True Image 2015
    Acronis Backup for PC
    AOMEI Backupper Professional
    Macrium Reflect
    Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
    “Recovery
    Your PC needs to be repaired
    A required device isn’t connected or can’t be accessed.
    Error code: 0xc0000225
    You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
    Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
    Thank you in advanced.

    Hi,
    How did you clone the HDD ? One-for-one or different method ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for