LSMW Master Data Load issue.
Hello Friends,
I hope that someone out there can provide a answer to my question.
I am attempting to use LSMW to load Alternate units of measure via MM02. The Main data is already in the system.
My Flat file has 2 levels.
Header--> contains Material Number
Line --> contains data relevant to each UOM that I want to enter.
When I do the Direct Input Method, I get the following message:
"The material cannot be maintained since no maintainable data transferred"
Here is the format of the flat file.
SOURCEHEAD HEADER
IND C(001) INDICATOR
Identifing Field Content: H
MATNR C(018) Material
SOURCELINE UOM DATA
IND C(001) INDICATOR
Identifing Field Content: L
MAT C(018) MAT
UMREN C(005) Denominator for conversion to base units of measure
MEINH C(003) Alternate Unit of measure sku
UMREZ C(005) numerator for conversion to base units of measure
EAN11 C(018) International Article Number (EAN/UPC)
NUMTP C(002) Category of International Article Number (EAN)
LAENG C(013) Length
BREIT C(013) Width
HOEHE C(013) Height
MEABM C(003) Unit of Dimension for Length/Width/Height
VOLUM C(013) Volume
VOLEH C(003) Volume unit
BRGEW C(013) Gross weight
NTGEW C(013) Net weight
GEWEI C(003) Weight Unit
When I manually process the data, I have no issues.
I am thinking that I may just be missing some piece of information necessary to get this data processed, am can not see what the answer is.
Any Help that can be provided would be great.
Regards,
Christopher
Answered. Problem was that the Basic Data one flag was not set. Thanks to Murugesh AS
Similar Messages
-
LSMW Master Data Load issue for UOM.
Hello Friends,
I hope that someone out there can provide a answer to my question.
I am attempting to use LSMW to load Alternate units of measure via MM02. The Main data is already in the system.
My Flat file has 2 levels.
Header--> contains Material Number
Line --> contains data relevant to each UOM that I want to enter.
When I do the Direct Input Method, I get the following message:
"The material cannot be maintained since no maintainable data transferred"
Here is the format of the flat file.
SOURCEHEAD HEADER
IND C(001) INDICATOR
Identifing Field Content: H
MATNR C(018) Material
SOURCELINE UOM DATA
IND C(001) INDICATOR
Identifing Field Content: L
MAT C(018) MAT
UMREN C(005) Denominator for conversion to base units of measure
MEINH C(003) Alternate Unit of measure sku
UMREZ C(005) numerator for conversion to base units of measure
EAN11 C(018) International Article Number (EAN/UPC)
NUMTP C(002) Category of International Article Number (EAN)
LAENG C(013) Length
BREIT C(013) Width
HOEHE C(013) Height
MEABM C(003) Unit of Dimension for Length/Width/Height
VOLUM C(013) Volume
VOLEH C(003) Volume unit
BRGEW C(013) Gross weight
NTGEW C(013) Net weight
GEWEI C(003) Weight Unit
When I manually process the data, I have no issues.
I am thinking that I may just be missing some piece of information necessary to get this data processed, am can not see what the answer is.
Any Help that can be provided would be great.
Regards,
ChristopherHello,
You need to map BMMH1 along with BMMH6.
Map TCODE& MATNR in BMMH1 with XEIK1 = 'X' (BasicData). Subsequently map fields of structure: BMMH6.
I just made a test now and it works fine for me.
Hope this helps.
Best Regards, Murugesh AS -
Hi gurus,
Presently i am working on BI 7.0.I have small issue regarding master data loading.
I have generic data soruce for master data loading.i have to fetch this data to BW side.Always i have to do full data load to the master data object.first time i have scheduled info package and run DTP to load data to master data object, no issues, data got loaded successfully.whenever i run infopacage for second time and run DTP i am getting error saying that duplicated records.
How can i handle this.
Best Regards
PrasadHi Prasad,
Following is happening in your case:
<b>Loading 1st Time:</b>
1. Data loaded to PSA through ipack.It is a full load.
2. data loaded to infoobject through DTP.
<b>Loading 2nd Time:</b>
1. Data is again loaded to PSA. It is a full load.
2. At this point, data in PSA itself is duplicate. So when you are running the DTP, it picks up the data of both the requests that were loaded to PSA. And hence, you are getting the Duplicate record error.
Please clear the PSA after the data is loaded to infoobject.
Assign points if helpful.
Regards,
Tej Trivedi -
Error in 0EMPLOYEE Master Data Load Issue
Hi,
We have 0EMPLOYEE Master Data. Due to our new development changes ralted to 0EMPLOYEE, we have scheduled 2 new info packages with Personnel number range. While creation of infopackages, we forget to main time interval from 01.01.1900 to 31.12.9999. Instead of this, the default range was selected as 24.04.2009 to 31.12.9999. Because of this selection in InfoPackage, the Employee Master Data Valid from date was changed to 24.04.2009 for all the employees in the master data after the data load.
Even after i change this selection properly and loading the data also, its not correcting with correct valid from dates.
Can you please advice, how can we fix this issue ASAP as its a production issue?
Thanks!
Best regards,
Venkata> Even after i change this selection properly and loading the data also, its not correcting with correct valid from dates.
May be for this you have the ONLY option to delete 0Employee master data and reload it again. For this you need to delete dependent transaction data also.
Cheers,
Sree -
Hi Experts,
This is regarding an issue with Master Data "DELTA" load.
WBSe master data has below fields
WBSe
Approval Year
Program definition
Program position
Funding Type
ABCD
2014
ZZPA
Z_ABCD
CB
Program Position master data has below fields
Approval Year
Program definition
Program position
Funding Type
2014
ZZPA
Z_ABCD
DC
WBSe master data table has "look up" for program position to populate "funding type" based on Approval Year,Program Definition and Program Position.
The issue is, daily delta load is not getting "recent/new funding type values".
But, If load the same record with program position selection in FULL Load, the new funding type is getting updated.
Please tell me why "funding Type" is not getting updated with new value in DELTA load.
Thanks
AshaHi Asha,
In delta mode only new or changed records are loaded to WBSe MD,
and look up will only pick up data if data is loaded from Data Source to WBSe MD.
There are 2 solutions to this :-
1) change WBSe MD to full load, it will take care, as MD is always over written.
2) Enhance this field in Source system, i.e. Data Source enhacement, if you know the Table for look up in source system.
Thanks and Regards,
Amit. -
We are on SPM 3.0 SP3 (BW on HANA) We get the following error:
"Data target EXPORT data cluster too large for application buff () inactive; processing stopped. Activate data target"
when we load a master data file which has more than 4000 rows. Some of our files have 300000 rows and splitting the files into smaller chunks cannot be an option. We have tried the option provided by a SAP note to adjust the parameters for the infopackage. We have also tried tweaking the packet size in the RSXAADMIN table.
Any help in resolving this issue is appreciated.
Thanks,
ManiHi Mani,
Select the infopackage and reduce "Maximum size of a data packet in rows" to 1000 by default its value should be 20000 reduce it to 1000.
If still don't work reduce it further like 800 or less.
Let me know if you need further help.
Assign point if helped.
Regards,
Aditya Panwar -
Master data load issue in BPC Dimensions
Hi BPC Experts,
I am facing an issue when loading master data to BPC dimensions.I have an Infoobject called Prodtype.I loaded master data and text to prodtype infoobject.Then i locked the BPC dimension C_Prodtype and executed DTP to load attributes and text from infoobject prodtype to BPC dimension C_Prodtype .We able to see the data in BPC dimension C_Prodtype.By using program we are updating the BPC Dimensions C_Prodtype.But this product type values are not displayed in BPC Administration.
I request your help in solving this issue
Thanks
MaheshHi Mahesh,
Please log into BPC admin console. Select the dimension and click on "export dimension" from the action pane.
Hope this helps. -
Master data load issue with flexible data source
Hi All,
1CL_OLIS001have this data source for loading configuration data. the changed records are not updating into this DS regularly.
I have delta load on this every day. It loads correct data for one month and suddently it will start loading 0 records every day with out failing. If I reset the delta, it will work fine for month or two and then will corrupt again.
Is any one have this kind of issue before Please suggest to resolve this issue permanently?
Thanks and Regards,
PoojaHi Pooja,
1) It might be Database table space issue in the backround, Please checkit out with BASIS
Regards,
Marasa. -
Master data Load for Substance Creation : Using BAPI in LSMW ?
Hi ,
Had any one did a Master data load for creating a Substance in SAP RM. If so please let me know the best possible option. I am beeing trying to figure out the option to load Substances and its IDENTIFIER / MATERIAL ASSINGMNET from my legacy system. But I am not geeting a clue to use LSMW. ( Direct or BatchInput )
I am not seeing any BAPI for uploading it through the LSMW except the one BUS1077 ( method SAVEREPMUL ) and I guess this is used along with IDOC.
Appreciate your help and suggestion.
DavidThanks John.
I will try this option what you have suggested. Even I told by business team to look for CG33. But they were been telling me some format issue. Probably they would meant the same what you have said. But they were not aware of work around for this. your information is intresting.
The other option given to me was to create a recording for each and every Tab like Substance header / Identifier / Material assignment etc. seperately. Technically I don't feel good to create in that way. Do you think that is alernate approach.?
With Respect & Regards
David -
Master Data loading got failed: error "Update mode R is not supported by th
Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
NiravHi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM -
Data Load Issue "Request is in obsolete version of DataSource"
Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
SamitHi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu. -
Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT
Hi Experts,
I am performing master data load through standard DM package with Filter selection as:
1. Chart of Accounts
2. Hieararchy selection has 4 hierarchy names
3. Selected Import Text nodes
4. Selected Set Filters by Attribute OR Hierarchies
I have run this DM package for a set of data and selections a week ago and it worked fine.
However when i run it now, it is giving issues,
It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
I am running the DM package in Update and have selection as External.
Any sugestions for checks / has anyone encountered this issue earlier?
Regards,
Shweta SalpeHi Guyz,
Thanks.
I found that the issue was with the transformation file where i was maintaining the RATETYPE.
When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
however now i do not have Ratetype populated in the system.
my rate type mapping is:
RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
and in conversion file i have TOSKIP *skip
I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
Regards,
Shweta Salpe -
Master data load gives dump with exception CX_RSR_X_MESSAGE
Hi all,
I scheduled master data load for 0MATERIAL in our BI 7.0 Quality server. The load ended in dump with the exception CX_RSR_X_MESSAGE. The data has loaded into PSA( 37257 from 37257 records) but the technical status is red and has not updated the master data object.
I have seen note 615389 which talks about number range but the check is successful. The data load was successful in development server. This error has occured only in Quality.
We are on SP 12 in BI 7.0.
We are moving to production soon, so this is an urgent issue. I would appreciate if anyone responds soon. Points will be rewarded.
with regards,
AshishHi,
The log of the dump is given below.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Information on where terminated
Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 78
of the (Include) program "LRRMSU13".
Source Code Extract
Line
SourceCde
48
*... Nachricht an den Message-Handler schicken
49
50
*... S-Meldung wenn kein Handler initialisiert
51
DATA: l_type TYPE smesg-msgty,
52
l_zeile TYPE rrx_mesg-zeile.
53
CALL FUNCTION 'MESSAGES_ACTIVE'
54
IMPORTING
55
zeile = l_zeile
56
EXCEPTIONS
57
not_active = 1.
58
IF sy-subrc NE 0.
59
l_type = 'S'.
60
ELSE.
61
l_type = 'W'.
62
ENDIF.
63
64
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
65
EXPORTING
66
i_class = 'BRAIN'
67
i_type = l_type
68
i_number = '299'
69
i_msgv1 = i_program
70
i_msgv2 = i_text.
71
ELSE.
72
DATA: l_text TYPE string,
73
l_repid TYPE syrepid.
74
75
l_repid = i_program.
76
l_text = i_text.
77
>>>>>
RAISE EXCEPTION TYPE cx_rsr_x_message
79
EXPORTING text = l_text
80
program = l_repid.
81
ENDIF.
82
83
ENDFUNCTION.
I went to SM21 and went through the system log. There was a log with the following text ORA-20000: Insufficient privileges#ORA-06512: at
"SYS.DBMS_STATS", line 2150#ORA-06512: at "SYS.DBMS_STATS.
I found a note 963760 for this error. After the changes said in this note were done I reloaded the data and it worked fine. Data load for another data source which gave dump now worked.
I am not sure if the note did the trick. So i am keeping this post open in case someone finds another solution or can confirm the solution which worked for me.
Thanks Oliver and Oscar, for replying.
regards,
Ashish -
Automate Master data loads in BPC7(MS)
I need to update dimension members in SAP BPC7 (MS) from an external source.
The source system for my current project is BW, but if you have done any automated master data loads from any other system or even from a "temp" table please post your solution or tips.
Thanks!
MezHi Mezert,
Would like to chime in with some of the things I've learned about this process over 3-4 years I've spent with BPC/Outlooksoft:
-- Automating maintenance of the dimension/master data might be the biggest single weakness of the BPC solution on the MS platform. It's one of the big reasons that the Netweaver platform basically replaces DTS/SSIS and has more direct linkage to BI/BW cubes and master data (InfoCubes).
-- It is also one a very common issue and in fact, you will have to deal with what the old-timers in BI call "slowly-changing dimensions" at almost every client eventually. For instance, you have a list of proucts/materials that every so often someone adds an item to. ...Well, before you can enter anything for it in BPC, you have to add the dimension member, of course.
-- So far, this challenge has been met by bringing in specialist DTS/SSIS experts in most cases who can employ the special "Custom Tasks" and build one of these packages to run in an automated way to populate the tables inside SQL Server and then execute the Admin MakeDim task to process the cube/application.
-- Usually the development/testing/deployment of these solutions is a non-trivial undertaking. It can be done, but there are peculiar challenges.
-- One example of a challenge is what happens if you need a dimension with > 65,000 members? Well, it can be created and populated by a DTS package, however, when you check the package and the custom task from the old Outlooksoft stuff out, you see that it CLEARS the entire dimension table before re-filling it. ...Yep, it wouldn't allow an "Append" function to run.
-- A second example of a peculiar challenge is that unless you update the Excel Dimension Sheet, you will have to do all the updates in SQL Server Mgmt. Studio and really won't be able to touch the BPC Admin again for that dimension.
Apologies for such a long post, but this is a fairly significant issue and I have to do a lot of research to piece together some of these things. ...If anyone else has something to add as a best-practice, please post. -
Bi admin process chains- content master data load has failed
Hi Experts,
i worked with Bi Admin cockpit set-up, all the things are going fine
but Content Master data load (Attribute)has failed and i got the errors like
1)data records for package 1 selected in PSA-2 errors
2)Error 4 in the update
can anyone suggest me how can i sove the issue
regards
MrudulaHi
yes, i got 2 errors in Psa
when i click the 1st error i got like
Data record 10023 & with the key
'EBTCLNT100ACGRAZ_BWRPRT_USR_FBW_Ptest0001 &' is invalid in value
'EBTCLNT100ACGRAZ_BWRPRT_USR_FBW_attribute/characteristic 0TCTBWOBJECT &.
And i it gave the procedure as
if this message appears during a data load, maintain the attribute in the PSA maintenance screens. if this message appears in the master data maintenance screens, leave the transaction and call it again. this allows you to maintain your master data.
And when i click the 2nd error
it has showed the data record as 10024 and remaing explanation is same like 1st one
in this i am not getting, how to proceed the solution.
plz help me anyone
Thanks and regards
Mrudula
Edited by: mrudularajesh on Jul 1, 2009 7:39 AM
Maybe you are looking for
-
I can't use FaceTime after upgrading to Lion!
Hi, Yesterday I upgraded my MacBook to Lion, and afther I upgraded FaceTime does not work. I used it prior to my upgrade, and it worked perfect. I have a neew macbook pro 13" 2,3ghz bought on sunday, so its brand new!! When I try to use FaceTime I lo
-
How to show Blob column in APEX application
I have table with blob. The images are loaded through a scheduled night process. These are not the images uploaded using APEX. How can I show these images using APEX? Thank you,
-
Sun one server 7 and sun app server 8 incompatibility
I had all my ejb code running nicely on sun one server 7. Now I have to port to 8 and while the same ear file deploys successfully, I'm unable to make any create calls on my CMP beans. I get server side error "argument type mismatch", but I've checke
-
Windows XP - folders and files
I am just doing some background research with Windows XP and the Mac server. What I am looking for is ie: Mac 10.4 client connected to a Windows 2003 server when saving a file might not be able to becuase the file path is too long. Does an error occu
-
Tried restoring my iPhone 4s iTunes said it couldn't restore it and now iTunes won't recognize it and the screen is frozen on the plug into iTunes message