LSMW TAX classification for materials

Hi!
I read a lot of threads concerning these topic, but I couldn't solve my problem.
I have more than one tax classifications from different countries for one material. However I don't know, where I should enter the data cause it's just possible to enter one country in BMMH2.
Until now, I mapped the data to the fields TAXM1...TAXM9 of BMMH1.
The result of the Direct Input: "You have not fully maintained the tax classifications"
I guess, it's not necessary  to map to TATY1..TATY9 of BMMH1. Right?
Nevertheless,  with and without these fields mapped, the message is the same.
..and should I map the same fields also in BMMH2?
I tried it, but without any effects!
Should I enter different countries in separate data sets?
Tax classification data consist of TAXM1..9 and TATY1..9
Which fields are also necessary?
Thanks in advance!
Michael Kuehne

@Murugesh
Thanks a lot for your affort!
I checked my lsmw project concerning your points and did some corrections.
However, something is still wrong in my lsmw.
- tax classification of just one country in BMMH1: works;no errors
- tax classiification of just one conutry in BMMH2 and no tax classification in BMMH1:
-- read data: correct; no errors
-- conversion of the data: correct; no errors
-- throws an exception during the check against the customizing in lsmw
-- Direct Input: failed: "You have not fully maintained the tax classifications"
The converted data is 100 percent correct, for this reason the failed direct input is a bit strange to me.
My there's an option in the customizing, that's not possible to set more than one country the tax classification of the materials.
Do you know an option like this?
The exception during customizing check is also a bad signal.
I am running out of idea, what could be wrong.
Maybe I should create a new object in lsmw and try it again.
thanks in advance
kind regards
michael

Similar Messages

  • Tax classification for sales order before ECC

    Hi expert,
    We have recently upgraded from 4.6C to ECC6.0 and noticed the following
    issue, please kindly advise. Thanks.
    The tax classification for one of the regular customer has always been
    maintained as ‘0’ (Tax Exempt).
    In 4.6C, in the sales order condition tab, the system will auto
    calculate and reflect the output tax amount automatically for this
    regular customer.
    However, in ECC6.0, with the same customer and material, the sales
    order will no longer auto calculate and reflect the output tax amount
    anymore.
    Nevertheless, if we maintain the customer tax classification field
    as ‘1’ (Liable for Taxes) before raising the sales order, or if we
    amended the sales order tax classification field manually as ‘1’, then
    the output tax amount will auto calculte and reflect as expected.
    We would like to know why is there such differences between 4.6C and
    ECC6.0. What should be the proper standard behaviour and if there is
    any actions required be get the system to perform as per in 4.6C?
    Please kindly advise. Thanks.
    Best Regards,
    Vincent

    Hi,
    I am sure you must have done some of the analysis already on these points but it does not harm to do it again: 
    1) Check the Customer Master and check the Tax Category of the Customer to make sure that it is maintained as 0;
    2) Check the Tax Record [MWST Tax Condition Type normally] for whichever tax table you are maintaining it for exists 
    3) Check in the Condition Tab in Pricing Details if you are finding the assess to the Tax Records happening for the Customer and Material combination.
    If you find any of these three as the smoking gun you should be good.
    I do not think personally that if the issue is only with one customer that this is an upgrade issue. Even otherwise, Tax related stuff has not changed in anyway between those versions.
    Get back to me if you have any questions.
    Thanks.

  • BAPI to create tax classification for business partners

    Hi all,
    I'm trying to create tax classification for a business partner (situated in the tab Control) from a BAPI.
    I tried to use BAPI BUTX_FRG0010_CREATE, but I always receive an error...
    Does someone know how to implemnt this ? Or do I need to use another fm ?
    Thanks in advance !
    kr,
    Björn

    Hello,
    I should have mentioned that I'm creating Business partners in ERP, and not in CRM
    The error I receive is this one :
    Tax classification     does not exist
    The data I specify in the table is the same dataI fill in when creating a business partner manually.

  • Component Allocation LSMW not working for materials having alternative BOMs

    Hi Experts,
    I have a requirement in Component allocation LSMW.
    Component Allocation LSMW was created using a material which do not have an alternative BOM and the LSMW NOT working for materials having alternative BOMs. Currently iam using Batch Input Recording method in LSMW.Can any one suggest me is it possible by recording method in Lsmw. Because in transaction CA02 when we click the CompAlloc button in application tool bar we get a pop up screen with alternative BOM's, we have to choose any of them. If we choose any of the alternatie BOM in the pop up screen then it will be fixed always, but depending upon my flat file value of alternate BOM i need to pick the value. It is not static.
    Can any one suggest me is there any BAPI for this requirement.
    Your hel will be greatly appreciated.
    Thanks & Regards,
    Venkat.

    Use BDC instead of LSMW, that will solve your problem.

  • Tax Classification for Material in sales Org1

    Hi Friends,
    I want to define the tax classification for my material. Can someone please let me know the path or the t-code where I can maintain the same.
    Regards,
    Wasim.

    IMG > Sales & Distribution > basic functions > tax > .....
    for which country you finally have to do the classification in material master is dependend on the assingment of plants to sales org.
    IMG > Enterprise structure > assignments > sales >  assign plant to sales org distribution channel

  • LSMW - TAX CLASSIFICATION FIELD

    Hi all,
    1)I am uploading materials by LSMW - Direct input method.
    [5th step in LSMW(Maintain Field Mapping and Conversion Rules).]
    I would like to know the field name for mapping for <b>Tax classification</b> field in Sales Org 1 view of Materail Master.
    I need to upload this field with 1 as input.
    How do this?.
    2) What would be the input value for <b>Check Box</b> in Material Master for LSMW.
    Thanks in Advance.

    hi,
    kavitha,
    as enric said,
    Field TAXM1 .... TAXM5 = Tax classification ,
    try this,(
    and also do this:
    TSKM ( transparent table) - TAXKM  field.
    hope this may help you,
    Regards,
    Srinivas

  • LSMW Tax classification

    Hi,
        I am getting an error in LSMW...Tax category does not define classification 1.
    Does any one know where i have to make changes?
    Thanks

    Hi,
    has the tax categories been configured by your functional consultant?
    regards,
    sangram

  • Tables for Batch classification for materials

    Hi SAP gurus,
    I have an issue that I need to display the values for a number of materials in its classification view (class type 023) without using MM03.
    Could anyone please let me know the table(s) where I can find this?
    Thanks !!

    Hi Moumita_kar,
    Characteristics :
    CABN      Characteristics ( o.a. batch/vendor)
    CABNT      Characteristics description
    CAWN      Characteristics ( o.a. material)
    CAWNT      Characteristics description
    AUSP      Characteristic Values
    Class types and objects :
    TCLAO      Several class types for object
    TCLA      Class types ( vb. lfa1 => v10 en 010)
    TCLAT      Class type text
    TCLT      Classifiable objects
    TCLC      Classification status
    Links :
    INOB      Link between Internal Number and Object
    KLAH      Class header data
    KSSK      Allocation Table: Object (vb.matnr) to Class
    KSML      Characteristics for a class (internal number)
    Please try and confirm.
    Regards
    Suri

  • Sales view / Tax classification upload in material master - LSMW

    Hi All,
    While Creating in  LSMW using RMDATIND Batch input method for material mater creation . I am getting an error of "you have not fully maintained tax classification" (M172 error message).
    LSMW details are as follows:
    Project, sub-proj, object : SCIMM,SCIMM,SCI_MM_CREATE
    Please suggest the field value mapping section of LSMW and suggest me how to fix the problem.
    When I create masters manually, in sales view/tax classification 4 tax categories (3 for CA CTX1,CTX2,CTX3 and one for US UTXJ) are getting populated automatically and I need to key-in only 0 or 1 for tax values (ex material :KCC9800MEKIT for sales org 2000, dc 70, dv 70).
    Please sugget me how to fix this issue.
    thanks
    PRadeep

    Hi Murugesh,
    Thanks for your response on this query. I read the link contents.
    LSMW TAX classification for materials
    In the above thread, you have specified
    1. If you have a separate file for tax codes to be applied for different materials then you need to map the records of this file to BMMH2 ( multiple records for a material possible for different countries). Then you need to map BGR00, BMM00 & BMMH1 with another header file with one record for material for the corresponding records on file which correcponds to BMMH2.
    I require your help to implement the above step. As mentioned by you, I have 3 tax codes for CA and one for US (2 diff countries) for each material to be maintained in Tax classification.
    I have created a main source structure  SS which has fields for all views (basic view, sales view, purchasing, plant/sloc and warehouse). I have created a substructure SSTAX for main source structure SS for Tax fields (Aland, taxty,taxm1) and assigned to BMMH2. Will this work or we need to create two  source structure (at same level) for this requirement.
    I am bit confused on how to link these two input files.  I created one record for material xyz in header file and 4 records in tax file (4 tax categories ctx1,ctx2,ctx3 and utxj). How to create one to one relationship working between header and tax file. How the tax file structure will be for 10 material records?
    LSMW Direct Input Method RMDATIND tax classification material
    In the above thread, I find difficulty to follow your steps for same tax data applicable for all materials.
    1.enable the
    Extras->DisplayVariant
    In LSMW transaction, I find diffculty to locate the above option.
    from the menu of the LSMW & check all the check boxes. Now you see the
    __END_OF_RECORD__
    for the structure
    BMMH2which has to be mapped with the input structure in the Maintain structure relations step.
    double click on the __END_OF_RECORD__
    Again I find difficulty to follow the above step. Please explain me step by step to reach below abap editor step.
    which will lead to ABAP editor & then put the following code:
    Canada
    bmmh2-stype = '3'.
    bmmh2-aland = 'CA'.
    bmmh2-taty1 = 'CTX1'.
    bmmh2-taxm1 = '1'.
    transfer_record.
    bmmh2-stype = '3'.
    bmmh2-aland = 'CA'.
    bmmh2-taty1 = 'CTX2'.
    bmmh2-taxm1 = '1'.
    transfer_record.
    Thank you very much for your help and time. I am sure this will be helpful for Pradeep as well.
    Thanks and regrads
    Varadharajan

  • Updating the Customer & Material Tax Classification via LSMW only

    We need to update the Customer and Material Tax Classification via LSMW only, in such a way that on the updation of the Tax classifications the Customer Master and the Material Master should be updated automatically.
    Please let me know if anyone has done the same also it would be really helpful if you can provide me the details.
    Regards,
    Arindam

    Hi,
    It's not clear your question to me.
    Do you want to update the Tax classification in the customer master & Material master?
    I did same, but with 2 different LSMW"s as there is not link between customer master & Material master.
    To update customer tax classification -
    In that you have to feed relevant customer numbers with sales areas & relevant tax classification for one LSMW.
    To update Material tax classification -
    In that you have to feed relevant material numbers with sales areas & relevant tax classification for different LSMW.
    Best regards,
    Anupa

  • New field for tax classification (Pricing)

    Hi
    The scenario is - we need to map a taxes from R/3 to CRM. for this we cant use MWST , as this tax condition is already being used in the current process.
    If we use another condition type then the tax classification for Material doesnt get picked in CRM. So according to the SAP note -336235, we have done the development.
    +The developments includes + - new field created for material tax classification purpose and this field assigned to Pricing structure KOMP and KOMG. we have also maintained condition record by using this field , but the data is not being read by this field during the calculation of taxes in sales order (R/3).The data is exist in material master -Sales org1 tab -Tax classification (1 or 0).
    Could anyone let me know, that how the tax classification data can be read from material master for this new customized field.
    Thanks in advance.

    To use a custom field in pricing, you need to do two things:
    1.  Add the field to KOMP and KOMG and
    2.  Move the appropriate value in a user-exit.
    Your post says that you have done 1. above.  Have you coded the user-exit for 2. above?  The user-exits are in MV45AFZZ.

  • Tax classification screen for item level not appearing in sale order under Billing Doc tab

    Hi Expert
    while creating sale order Tax classification screen is not appearing for item level under Billing document tab.
    Tax classification for customer and Material has already maintained. Tax classification screen is not appearing for USER but same time from our USER ID we can able to see that screen.
    please help in above issue. is this related to Authorization issue or other thing need to check.
    Regards
    Pash@SD

    Hi,
    As per standard in Sales Order Document you will be able to see the Tax Classification fields in Billing Tab at Header level (for Customer Tax Classification) and at Item level for (Material tax Classification). The values from Customer M<aster is not populated at Header level as per standard but you can populate the value by using the Exit. Material tax classification populated from material master as you can see that at item level.
    If for one User you are able to see and for other you are not able to see, kindly check first whether both are using same customer and material, and if yes, then check the User Exit.
    Thanks and regards,
    Amitesh Anand

  • Material Tax Classification

    Hi Gurus,
    Need a little suggestion for a doubt -
    I accidently changed Material Masters data of some items, after running a faulty LSMW
    When I look at the change document for some of those articles it says -
    Change          Tax classification article          1     Ireland
    So I believe it has changed the tax classification for this article ONLY for Ireland
    when I reversed the change .. it says ..
    Change          Tax classification article     1 Full tax     0 No tax     Ireland              Output Tax
    I have a few doubts .. first , is this changed only for a single country or for all of them .. & if I have reversed the changes  ..
    Plz suggest what shall I do to make it as it was ...
    << Moderator message - Please do not promise points >>
    .. many thanks for your help
    Edited by: Rob Burbank on Feb 7, 2011 3:54 PM

    The tax classification section is dynamically defaulted based on the plants that are linked to your sales area.
    for each plant country you will see an entry.
    if such an assignment is made after go-live, then with the next change of material master you are asked to complete the classification.
    This cannot be undone. you can just change it to another value if the value you entered was wrong.

  • Error with tax classification

    Hello guru's,
    I am facing a typical error. while creating sales order the VAT condition is capturing the tax classification indicator from sold to party. It has to be from ship to party. Pl. help.
    Regards,

    Hi,
    The tax classification search is based on the Customer master data
    For TAX determination, system will first search the Tax classification of the Payer master data
    If Payer master Data is not maintained , then it will search for the Ship to Master data ,
    If none of the Payer and Ship to were maintained , then it will search for the tax classification of sold to Master data
    The Sequence for search is
    PAYER
    SHIP TO
    SOLD TO
    In your case, if the Tax classification for Payer and ship to not maintained then it will come to sold to
    Please check if the Tax classification was maintained in the ship to or not
    thanks
    santosh

  • Customer Tax Classification : Missing entry screen in customer master

    Hi All,
    Anyone know if any customizing is required to activate the Customer Tax Classiification entry screen in the Customer Master of Sales Area (BillingT Tab)? I could not enter the customer tax classification as the entry screen doesn't appear in the customer master.

    Hi,
    You have to maintain few settings for this
    In OVK1 Enter the TAX CATEGORY for the Country
    In the OVK3 transaaction code enter the TAX CLASSIFICATION for the Tax category defined in OVK1
    after this assignment try to create the customer master , in the Billing tab the tax classification will appear.
    regards,
    santosh

Maybe you are looking for