Customer Tax Classification : Missing entry screen in customer master

Hi All,
Anyone know if any customizing is required to activate the Customer Tax Classiification entry screen in the Customer Master of Sales Area (BillingT Tab)? I could not enter the customer tax classification as the entry screen doesn't appear in the customer master.

Hi,
You have to maintain few settings for this
In OVK1 Enter the TAX CATEGORY for the Country
In the OVK3 transaaction code enter the TAX CLASSIFICATION for the Tax category defined in OVK1
after this assignment try to create the customer master , in the Billing tab the tax classification will appear.
regards,
santosh

Similar Messages

  • Tax classification fields are not appeared in master data

    Dear Experts,
    I searched the forum about my issue but i did not get any solution.
    I am not able to see the tax classification fields in customer master and material master.Even i assigned Country IN to JLST and JCST condition types by T-code OVK1.
    FYI
    I have copied the org elements from standard (which are already given by default).Initially i was able to see 2 different countries with tax MWST in both customer master and material master.
    EX:
    AT   MWST
    DE   MWST
    But i do not wanted these. so i deleted these assignment from OVK1 and assigned country IN to JLST and JCST,and i went to customer master and material master but those fields are not appeared.
    Note:Country of plant,company code and sales organizations is IN
    Help me to view tax classification fields in Master data.
    Thanks&Regards
    Ravikumar.R

    Then how system knows this customer is liable for JLST.
    In customer master, under the Taxes tab, it would be like
    Country::::Name:::::Tax Cat.::::Description::::Tax Classification
    While creating customer master, if your configuration is in line with standard, then under the tab Tax category, you can see MWST flowing automatically.  You just have to input tax classification as 1, 2 etc.,
    Also since as you said above, you are maintaining the combination of country/plant region/customer region/customer tax classification/material tax classification, you can very well differentiate VAT & CST.
    Wherever customer region comes as your plant region, assign VAT tax code and wherever, customer region differs from plant region, assign CST tax code in VK11.
    G. Lakshmipathi
    ps:  please spell the name correctly

  • How to make tax classification field mandatory in sales order ?

    Hi,
    while creating sales order, " how to make tax classification field mandatory ".
    Please tell me the procedure.
    In tcode OVA2. what are the entries for fields,table.
    Regards,
    sapsduser

    Dear ,
    Could you please share why you want to make tax Classification field mandatory in sales order.
    Maintain Tax classification field for customer in Customer Master Data = (Sales Area Data - Billing document Tab page)
    Tax Classification field for Material in Material Master Data = Sales Org. 1 View.
    While creating sales order and enter customer and material system automatically fetch the tax classification related data into sales order.
    Tax is calculated based on the ship to party.
    Hope this will help you.....
    Regards,
    Manoranjan.

  • Missing Tax information of Customer Master data

    Dear all,
    I have an error with Customer Account Group. I create a customer account group as Z001 (Domestic customer). After that, I go through Financial Accounting - Account Receivable and Account payable - Customer Account - Master Data - Preparation for Creating Master Data -Define Account Group with screen layout (customers) (also with Define Screen Layout per activities). And for Control Tab, I set all items are optional. But when creating Customer master data for this group, when going to SALE AREA DATA, Tab BILLING DOCUMENT, I found that the Tax information part is missing.
    I try to set all items are optional, but can't resolve this problem. Can you help me ?
    Thank you very much for your help,
    Sylvecat.

    Hi
    Goto TCODE : OVK3 and maintain the Customer Taxes
    Path : SPRO > Sales and Distribution > Basic Functions > Taxes > Define Tax Relevancy Of Master Records
    VVR

  • Customer Master Sales area data Customer Tax Classification.

    Hi Guru's
    Want to know that hoew to increase the No. of tax classification lines in the master data. At present there are only two entries (lines)  can be given for a single customer.
    What is the config menu path and setting involved in order to increase these entries in the Customer master, so as to enter some more combinations in it.
    For example I need the folowing combinations:-
    DE - MWST - 1
    GB - MWST - 4
    IR - MWST  -6
    CH - MWST - 3
    At present I am able to enter only any 2 of them and not more than that. I want a solution to enter more than 2 records in the Customer master.
    Thanks. Points will be awarded.

    Hi
    T code OVK3
    Menu path img-s.d-basic functions-taxes-define taxrelavancy for master records
    In that you will find for customer and material also
    For material it is t code OVK4
    Regards
    raja

  • Custom field in Basic data screen of invoice entry screen

    hello,
    I want to add custom fields in basic data screen of Invoice entry in SRM 5.0.
    As invoice Entry screen is divided into three parts:
    1. Basic data Screen
    2. Header data screen
    3. Item data screen
    Now according to OSS Note number 672960 we are able to add Custom fields in the header as well as item data screen of invoice entry without any difficulty.
    but our requirement is to add custom fields in the basic data screen.
    Is there way available to add custom fields in the basic data screen.
    Thanks
    Sarabjeet

    hi
    check this spro path
    Financial Accounting (New) --> Travel Management --> Business Add-Ins and User Exits in Travel Management --> Entry --> Screen Modifications: Adjustment of "User Data" Screen

  • Tax Classification -- Customer Account Group

    Hi all
       I have been given a set of Customers belonging to different Customer Account Group. I  want to know for which Account Groups, the Tax Classification was made Mandatory !
    Aim of us to extend some Customers/Partners from one Company Code to other !
    I use the BDCs for XD01 and XD02 for extending.
    Please help me to know where the Tax Classification for that Customer Account Group was mentioned mandatory !
    Thanks
    RJ

    Thanks Tan !
    I wrote the code for haandling the BDC for Tax Classification.
    My Q was : How can I know that
    For  Y001(for eq) Account Account , Tax Class is mandatory
    For Y002 Acct Grp, it is not mandatory !
    Thanks

  • Customer tax classification-

    Dear - All
    After defined the customer Tax classification in Customer Master Data- why it isnot coming to my sales order header billing view like 1 2 3 4 .
       Tell me what is the best Key combination for acess sequence to mantain the sales tax condition record..Also i have created in customer master data tax classification like zvat ,zcst ,zser and ztcs, can u help and tell me the best key combination(fields) for which will creat condition table and also acess sequence.
    thanks
    sunil

    Hi sunil
    If u want to get Customer Taxes into Sales Order ..Then u have to do
    1. Customer Tax Classification in Customer Master
    2.  U have keep this MWST Condition type in Pricing Procedure
    3.. U need to create Condition records for MWST Condition type in VK11
    Then u can get Customer tax in your sales order.
    Any quries revert me back
    Regards
    Srinivas.

  • Updating the Customer & Material Tax Classification via LSMW only

    We need to update the Customer and Material Tax Classification via LSMW only, in such a way that on the updation of the Tax classifications the Customer Master and the Material Master should be updated automatically.
    Please let me know if anyone has done the same also it would be really helpful if you can provide me the details.
    Regards,
    Arindam

    Hi,
    It's not clear your question to me.
    Do you want to update the Tax classification in the customer master & Material master?
    I did same, but with 2 different LSMW"s as there is not link between customer master & Material master.
    To update customer tax classification -
    In that you have to feed relevant customer numbers with sales areas & relevant tax classification for one LSMW.
    To update Material tax classification -
    In that you have to feed relevant material numbers with sales areas & relevant tax classification for different LSMW.
    Best regards,
    Anupa

  • Derivation rule to determine customer tax classification in COPA

    Hi Experts,
    Please guide me to complete this assignment.
    The requirement is to fetch the material tax classification and customer tax classificaion into COPA through derivation rule.
    we can fetch material tax classification through table VBRP.
    Please help me to derive customer tax classification( KNVI-TAXKD) through derivation.
    Customer tax classification data is available in table KNVI.
    But when you consider KNVI table through table lookup it is asking customer, country key and tax category. To define this derivation rule we need tax category values in COPA.
    We can get customer and country key but not tax category.
    How to bring tax category (KNVI-TATYP)
    into COPA to define derivation rule to fetch customer tax classification( KNVI-TAXKD).
    Please suggest me if any alternative solution to bring customer tax classification data into COPA.
    Points will be assigned to usefull answer.
    Thanks in advance.
    Regards,
    Amar.

    HI,
    The Tax related thing are balance sheet items . which can not be considered at CO-PA.
    only revenue item will be considered at Co-pa.
    Hope this is clear
    With regards
    krishna

  • Routines for determine the customer tax classification in VF02

    Hi
    i have to find out how the customer tax classification values is coming in VF02.customer tax classification  value should be '0'.but in my case it is coming '1'.
    i have to find out ,how the calculations has to be done and where should i modify the value.it is an production support issue.
    Please guide me .what are the  possible ways to fix the issue.
    Regards,
    Kiran

    I'm assuming that, the country is India and based on its requirement:
    Sales tax is a state government revenue. There are two types of sales taxes, Local sales tax & central sales tax. Local sales tax is intra state whereas CST is inter state.
    Example of LST : Point of sale i.e. delivering plant & ship to party are within the same state. The rates are defined by the respective state governments.
    Example of CST : The Delivering plant & Ship to party geographic locations are 2 different states. At the point of sales from one state, the ST goes to that state govt. & consignment is despatched to the Ship to party. Once that consignment is received at the ship to party state, sales tax will be levied once the sales is registered there. For this case, the LST that is applicable by the Ship to party further will not be applicable in all probability to be captured in SAP.
    Stock transfer : This does not attract any sales tax. The consignment is transferred from one D plant to another D plant irrespective of inter/intra state sales. The invoice that is accompanied with the consignment thus shall not have any final value. It's a zero value invoice, but the basic prices needed to be mentioned.
    The selling organisations normally needs to register with the sales tax authority of the respective state to have a warehouse or D plant to avoid the double taxation for their dealers/distributors.
    Now, the pricing procedure that is there in 4.7 is Factory sale with formula-JFACT, in which the CST condition type is JIN1 & the LST is probably JIN2. There may be surcharge cond types as well which will calculate the amount on either JIN1 or JIN2.
    For config :
    1.SPRO > S&D > Basic fn. > Pricing > Pricing control > Define & assign Pric. procedure > Maintain Pric proc.
    2. The tax rates are normally driven from the Tax classification of Customer & Material access. To do this config, S&D >Basic fn. > Taxes. You need to include the condition type for country IN in 'Define tax determin rule'.
    3. Same path : But go to Tax relevancy of master records where you configure the condition type & options of rates that will flow to these masters. One needs to understand here properly as u need to have unique combinations for picking the sales tax rates. I will try to demonstrate the smallest example. Let's say, the LST rates are 2%,4% & 0%. I will have two options for material master here. 1 for taxable & 2 for not taxable.
    For customer master, I will have 1-LST 2%, 2-LST4% & 3-LST0%. When I create master records for LST thru VK11 for JIN2, I will chose the access where the combinations of customer & material tax classifications are available. If this access does not exist create it under an access sequence. But normally this is standard. The condition records will look like,
    Cust-Tax classi.          Material tax claasi.        Rate           Tax code
            1                                    1                         2%               A1
            2                                    1                         4%               A1
            3                                    1                         0%               A1
    Remember, rates are flown from the tax codes. Tax codes can be created thru T code FTXP. This is normally a FI job.
    Hope this info helps
    Regards
    Manthan.

  • Customer tax classification determination(VA02/VF02)

    Hi
    customer tax classification is detetmined in VA02 with value '0', but where as in VF02 the value is '1'.
    but we want customer tax classification value '0' in VF02.what would be the root-cause for this problem.
    condition type is MWST and tax code : A4.
    waiting for your response.
    Regards,
    Kiran

    Hi
    Your pricing procedure should have the CTXJ condition and maintain VK11 condition record for CTXJ with 0% value and maintain the relevant Tax Code in that condition record. Based on this tax code the FTXP record will be hit and the tax values maintained there will be determined in the SD document. You need not maintain the VK11 conditon records for your tax conditions JRC1, JRC2 etc.,
    Since you have maintained tax records for the JRC conditons in both VK11 and FTXP, the system might be determining the values twice. You can confirm this point by maintaining two different values for the same condition type (say JRC1) in VK11 and FTXP, create a sales order....and post your observations in the forum.
    Thanks,
    Ravi

  • Add the custom infotype in Fast entry screen

    Dear All,
                       I add the one new created the custom infotype in the fast entry screen but when am going to create the entry threw pa70 transaction in that case my table control which is been in that infotype is not in editable mode means it's only display mode ..
    Kindly help me to fix this issueees.
    thanks
    Regards
    Sandeep Dabral

    Hi Sandeep,
    Can you share the steps to create fast entry screen to custom infotype? Also is it possible to create custom TCODE to access this instead of PA70?

  • Check tax classification Customer creation (IDOC)

    Hi all,
    I am a beginner in SAP Abap and i need some help to resolve my IDOC problem.
    I want to generate Customer migration. my segments for the IDOC are filled. I use the IDOC_INBOUND_WRITE_TO_DB to create my IDOCs. Also for some customers, an error occur with status 51 saying : Check tax classification; maintenance is incomplete.
    Or in the E1KNVIM segment, the tax code is filled as follow :
      CLEAR ds_e1knvim.
      ds_e1knvim-msgfn = '009'.
      ds_e1knvim-tatyp = ds_tax-tatyp.
      ds_e1knvim-taxkd = ds_tax-taxkd.
    and in the we19 transaction, i have tried to launch it foreground
    with the tax code filled correctelly.
    but the batch-input don't fill the tax code case.
    But for some other customers, the tax code case is filled correctelly?
    Did i messid something ?
    Thanks for your answers.

    Hi Julius,
    Thnx for the reply.
    No I am not maintaining any tax related settings & all the fields in R/3 in XD01 are optional. Can you please elaborate further as to wht Tax settings are you speaking about???
    Many Thanx.
    SP

  • Dispaly material with key field customer based on tax classification

    Hello all,
    Material is classified based on tax classification as products and goods.I need to dispaly these of either for some customers.
    Client is saying me to use the table MLAN(Tax Classification for material).
    Can anybody suggest me how can i pull the material part/service part(matnr)  from the table (MLAN) based on tax classification(TAXKM) with key field customer(KUNNR) when this table does not have customer has key field in it.
    Thank you,
    Sirisha

    Hello all/Brad,
    Requirement is , i need to add and dispaly material data in a column with heading as  tax classification  in ALV Report for the customer.
    Ex:  Customer 11094 brings material 336047-B21(Product)
          Customer 10973 brings material LDMSPMAP-M (Service)
    Material is classified as per the tax classification  as Product and Service. If tax classification is 1 then it is Product and if the tax classification is 2 then it is Service.
    So i'm trying to pull the material(Product/Service) based on tax classification with customer as key field.
    Customer is coming from customer master data.
    So i have used MARA table which has all three fields (Customer,Material,Tax classification) to get the required information but the table does not have test data for customer.So i told my client to update mara table with customer and tax classification data.
    But  my client told me to use MLAN table  because they have updated the data in this table.But unfortunately this table doesn't have customer field to pull the data.
    So that is the reason, i put the above question in the forum.
    PLease help me in solving this issue.
    Thank you,
    Sirisha

Maybe you are looking for