Lsnrctl start problem

dear all,
I'm try to connect to database with 2 PC but I have this problem
plz help
C:\Documents and Settings\comp2>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 14-OCT-2009 09:51:07
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Failed to start service, error 3.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error

user10947262 wrote:
dear all,
I'm try to connect to database with 2 PC but I have this problem
plz help
C:\Documents and Settings\comp2>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 14-OCT-2009 09:51:07
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Failed to start service, error 3.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
I had a similar situation a few months ago when trying to configure Apex, using entries copied from the installation notes. The listener would not start until i removed an entry “PlsqlRequestValidationFunction www_flow_epg_include_modules.authorize” from the dads.conf file that I had copied from the installation docs. Never did find out why my 10gR2 software did not like that entry.

Similar Messages

Possible lsnrctl start problem?

After a boot of SLES9, I startup the Oracle listener (for Oracle 10g). I get the following:
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.1.0.3.0 - Production
Start Date 14-NOV-2005 13:37:26
Uptime 0 days 0 hr. 0 min. 11 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/app/oracle/product/10.1.0/db_1/network/admin/listener.ora
Listener Log File /oracle/app/oracle/product/10.1.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.193.130)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
oracle@linux30:~>
The question I have is this stuff about "PLSExProc status UNKNOWN".
Is that normal, or do I have a problem that needs addressing?
Thanks
Tom Duerbusch
THD Consulting

The unknown status is normal. It just means that the service has not yet registered with the listener. The databases and other services register with the listener when they startup if the listener is already running. If the listener is not running when the service starts, they will register themselves at a later time. I don't recall the exact interval, but each service checks in with the listener every few minutes.
HTH
John

Listener Start Problem with TDE (Transparent Data Encryption)

i am testing Transparent Data Encryption in Oracle 10g by using the following link
http://oracle-base.com/articles/10g/TransparentDataEncryption_10gR2.php
Before Implementing the TDE listener was running fine but after implementation of TDE the listener was unable to start
Please check the steps which i follow
Step1-
specify the ENCRYPTION_WALLET_LOCATION parameter in the sqlnet.ora file, now SQLNET.ora file looks like the following
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
ENCRYPTION_WALLET_LOCATION=
(SOURCE=(METHOD=FILE)(METHOD_DATA=
(DIRECTORY=D:\oracle\product\10.2.0\wallet\)))
please check the contents of listener.ora file,i didn't make any configuration changes for listener before or after implementation of TDE
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = shakeel-pc.lhr.inov8.com.pk)(PORT = 1521))
Step2-
CONN sys/password AS SYSDBA
ALTER SYSTEM SET ENCRYPTION KEY AUTHENTICATED BY "myPassword";
TDE implemented successfuly implemented.
But when i try to stop/start listener
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 06-JUN-2008 05:44
:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 05-JUN-2008 22:40:14
Uptime 0 days 7 hr. 4 min. 16 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.2.0\db_1\network\admin\listener.o
ra
Listener Log File D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=shakeel-pc.lhr.inov8.com.pk)(PORT=15
21)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orcl_XPT" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\>lsnrctl stop
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 06-JUN-2008 05:44
:35
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
C:\>lsnrctl start
[i]LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 06-JUN-2008 05:44
:40
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is D:\oracle\product\10.2.0\db_1\network\admin\listener.or
a
Log messages written to D:\oracle\product\10.2.0\db_1\network\log\listener.log
Error listening on: (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PARTIAL=yes)(QUEUESI
ZE=1))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\E
XTPROC1ipc)))
TNS-12560: TNS:protocol adapter error
TNS-00583: Valid node checking: unable to parse configuration parameters
Listener failed to start. See the error message(s) above...
To start the listener i have to close wallet as
1- SQL>conn sys as sysdba
ALTER SYSTEM SET WALLET CLOSE;
2- Replace the SQLNET.ora file as previous ,now SQLNET.ora contains
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Now if i start the listener then the listener was started succesfuly
Please suggest why listener is not being start with TDE?

I have the same problem. I'm testing TDE using Oracle 11gR1. After setting the parameter encryption_wallet_location and restart the listener, the listener failed to start. The error is exactly the same
TNS-12560: TNS:protocol adapter error
TNS-00583: Valid node checking: unable to parse configuration parameters
By removing the parameter encryption_wallet_location, the listner can be started successfully.
Anyone can help?

Lsnrctl start with nl-0278 and snl-00016

I defined LOG_DIRECTORY_LISTENER path right (its permission is good and I can vi listener.log file there manually), and applied 8.1.5.0.2 patches. When try to lsnrctl start, get error:
/listener.logor creating log stream <LOG_DIRECTORY_LISTENER> path
NL-00278L can not open log file
SNL-00016:snlfohd:error opening file
Linux Error:2:no such a file or directory
Can somebody help ?
thanks a lot.
RedHat Linux 6.1 and Oracle 8i
James

Hi Ramesh!
Thanks for your help!
This was exactly the problem!
Fixing the Problem you can do in the following way:
First loggin as 'oraclexe'
Than open a shell
Than enter:
'source /usr/lib/oracle/xe/app/oracle/product/10.2.0/client/bin/oracle_env.sh'
and everything works fine!
Gerhard

Ubuntu 5.10 - lsnrctl start error - TNS-12555

Hi, hope you can help me with the following.
I'm unable to start the listener with the default tnsnames.ora and listener.ora files installed under Ubuntu 5.10. A listing of the error, and files below.
I am able to connect to sqlplus as system as long as I don't specify the sid. I am not able to access the database home page. However selecting dbms_xdb.gethttpport() does return a port number.
Any help appreciated.
chris@acute$ ./lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 04-APR-2006 08:57:17
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12555: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00525: Insufficient privilege for operation
   Linux Error: 1: Operation not permitted
Listener failed to start. See the error message(s) above...
chris@acute$ more ../network/admin/tnsnames.ora
# tnsnames.ora Network Configuration File:
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.1.2)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
chris@acute$ more ../network/admin/listener.ora
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.1.2)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)

That appears to be the problem. Logging in as oracle solves the issue.
On closer inspection it appears the $ORACLE_HOME/config/scripts/startdb.sh script does not start the listener with a prefix of su - oracle. This is probably an oversight as the stopall.sh script prefixes the listener stop call with su - oracle.
However I would have thought this problem would be common to all Linux installs, or is it something odd for Ubuntu?
Next the DB Home Page doesn't display, but I'll do some more research and post a separate message if necessary.
Thanks for your help.
CM.

./lsnrctl start effort- Message 1070 not found;

Message 1070 not found; No message file for product=network, facility=TNSTNS-125 error when trying to start the DB listiner?
oracle@linuxsrv:/u01/app/oracle/OraHome/bin> ./lsnrctl start
LSNRCTL for Linux: Version 10.1.0.4.2 - Production on 16-JUN-2009 17:16:15
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Message 1070 not found; No message file for product=network, facility=TNSTNS-125 45: Message 12545 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facili ty=TNS
TNS-00515: Message 515 not found; No message file for product=network, facilit y=TNS
Linux Error: 2: No such file or directory
oracle@linuxsrv:/u01/app/oracle/OraHome/bin>
OAS environment settings
LESS=-M -I
MACHTYPE=i686-suse-linux
LOGNAME=oracle
XDG_DATA_DIRS=/usr/share:/etc/opt/kde3/share:/opt/kde3/share
LESSOPEN=lessopen.sh %s
INFOPATH=/usr/local/info:/usr/share/info:/usr/info
ORA_NLS33=/u01/app/oracle/as10gHome/lib:/u01/app/oracle/bin:/u01/app/oracle:/u01/app/midtier:/u01/app/midtier/bin:/u01/app/midtier/as10gHome/opmm/lib:/OraHome/lib:/OraHome/opmn/lib/nls/admin/data
DISPLAY=192.168.2.9:0.0
ORACLE_HOME=/u01/app/oracle/as10gHome/lib:/u01/app/oracle/bin:/u01/app/oracle:/u01/app/midtier:/u01/app/midtier/bin:/u01/app/midtier/as10gHome/opmm/lib:/OraHome/lib:/OraHome/opmn/lib
LESSCLOSE=lessclose.sh %s %s
G_BROKEN_FILENAMES=1
COLORTERM=1
_=/usr/bin/env
OLDPWD=/u01/app/oracle/OraHome
oracle@linuxsrv:/u01/app/oracle/OraHome/bin> vi /home/oracle/.bash_profile
TMP=/usr/tmp
DISPLAY=192.168.2.9:0.0
ORACLE_BASE=/u01/app/oracle
ORACLE_MID=/u01/app/midtier
#ORACLE_OCA=/u01/app/OCA
LD_LIBRARY_PATH=$ORACLE_BASE/OraHome/opmn/lib:$ORACLE_BASE/OraHome/lib:$ORACLE_MID/as10gHome/opmn/lib:$ORACLE_MID/as10gHome/lib:$PATH
ORACLE_HOME=$ORACLE_BASE/as10gHome/lib:$ORACLE_BASE/bin:$ORACLE_BASE:$ORACLE_MID:$ORACLE_MID/bin:$ORACLE_MID/as10gHome/opmm/lib:$ORACLE_HOME/OraHome/lib:$ORACLE_HOME/OraHome/opmn/lib
ORACLE_SID=orcl
LISTENER=$ORACLE_HOME/bin/lsnrctl
TNS_ADMIN=$ORACLE_HOME/network/admin
ORA_NLS33=$ORACLE_HOME/nls/admin/data
PATH=/usr/local/bin:/usr/bin:/usr/local2/bin:/usr:$ORACLE_HOME/bin:$ORACLE_HOME/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin/$ORACLE_HOME/lib:$PATH
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib:$ORACLE_HOME/opmn/lib:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin:$ORACLE_HOME/lib:$PATH
export TMP ORACLE_BASE ORACLE_HOME ORACLE_SID ORACLE_MID ORACLE_OCA LD_LIBRARY_PATH LISTENER DISPLAY PATH TNS_ADMIN ORA_NLS33
Any suggestion in resolving?

exit and log back..
oracle@linuxsrv:~> env
LESSKEY=/etc/lesskey.bin
NNTPSERVER=news
INFODIR=/usr/local/info:/usr/share/info:/usr/info
MANPATH=/usr/local/man:/usr/share/man:/opt/dx/man
HOSTNAME=linuxsrv
XKEYSYMDB=/usr/share/X11/XKeysymDB
HOST=linuxsrv
SHELL=/bin/bash
TERM=xterm
PROFILEREAD=true
HISTSIZE=1000
LISTENER=/u01/app/oracle/as10gHome/bin/lsnrctl
ORACLE_MID=/u01/app/midtier
GNOME_PATH=:/usr
MORE=-sl
USER=oracle
LD_LIBRARY_PATH=/u01/app/oracle/OraHome/opmn/lib:/u01/app/oracle/OraHome/lib:/u01/app/midtier/as10gHome/opmn/lib:/u01/app/midtier/as10gHome/lib:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/kde3/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:/u01/app/oracle/as10gHome/lib:/u01/app/oracle/as10gHome/opmn/lib:/u01/app/oracle/as10gHome/dcm/bin:/u01/app/oracle/as10gHome/opmn/bin:/u01/app/oracle/as10gHome/lib:/usr/local/bin:/usr/bin:/usr/local2/bin:/usr:/u01/app/oracle/as10gHome/bin:/u01/app/oracle/as10gHome/bin:/u01/app/oracle/as10gHome/dcm/bin:/u01/app/oracle/as10gHome/opmn/bin//u01/app/oracle/as10gHome/lib:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/kde3/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin
LS_COLORS=no=00:fi=00:di=01;34:ln=00;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=41;33;01:ex=00;32:*.cmd=00;32:*.exe=01;32:*.com=01;32:*.bat=01;32:*.btm=01;32:*.dll=01;32:*.tar=00;31:*.tbz=00;31:*.tgz=00;31:*.rpm=00;31:*.deb=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.lzma=00;31:*.zip=00;31:*.zoo=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.tb2=00;31:*.tz2=00;31:*.tbz2=00;31:*.xz=00;31:*.avi=01;35:*.bmp=01;35:*.fli=01;35:*.gif=01;35:*.jpg=01;35:*.jpeg=01;35:*.mng=01;35:*.mov=01;35:*.mpg=01;35:*.pcx=01;35:*.pbm=01;35:*.pgm=01;35:*.png=01;35:*.ppm=01;35:*.tga=01;35:*.tif=01;35:*.xbm=01;35:*.xpm=01;35:*.dl=01;35:*.gl=01;35:*.wmv=01;35:*.aiff=00;32:*.au=00;32:*.mid=00;32:*.mp3=00;32:*.ogg=00;32:*.voc=00;32:*.wav=00;32:
ORACLE_SID=orcl
XNLSPATH=/usr/share/X11/nls
ENV=/etc/bash.bashrc
ORACLE_BASE=/u01/app/oracle
HOSTTYPE=i386
FROM_HEADER=
PAGER=less
CSHEDIT=emacs
XDG_CONFIG_DIRS=/etc/xdg
MINICOM=-c on
TNS_ADMIN=/u01/app/oracle/as10gHome/network/admin
GNOMEDIR=/usr
MAIL=/var/spool/mail/oracle
PATH=/usr/local/bin:/usr/bin:/usr/local2/bin:/usr:/u01/app/oracle/as10gHome/bin:/u01/app/oracle/as10gHome/bin:/u01/app/oracle/as10gHome/dcm/bin:/u01/app/oracle/as10gHome/opmn/bin//u01/app/oracle/as10gHome/lib:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/kde3/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin
CPU=i686
INPUTRC=/etc/inputrc
PWD=/home/oracle
LANG=en_US.UTF-8
PYTHONSTARTUP=/etc/pythonstart
QT_SYSTEM_DIR=/usr/share/desktop-data
SHLVL=1
HOME=/home/oracle
LESS_ADVANCED_PREPROCESSOR=no
OSTYPE=linux
LS_OPTIONS=-N --color=tty -T 0
XCURSOR_THEME=DMZ
WINDOWMANAGER=/usr/bin/startkde
TMP=/usr/tmp
G_FILENAME_ENCODING=@locale,UTF-8,ISO-8859-15,CP1252
LESS=-M -I
MACHTYPE=i686-suse-linux
LOGNAME=oracle
XDG_DATA_DIRS=/usr/share:/etc/opt/kde3/share:/opt/kde3/share
LESSOPEN=lessopen.sh %s
INFOPATH=/usr/local/info:/usr/share/info:/usr/info
ORA_NLS33=/u01/app/oracle/as10gHome/nls/admin/data
DISPLAY=192.168.2.9:0.0
ORACLE_HOME=/u01/app/oracle/as10gHome
LESSCLOSE=lessclose.sh %s %s
G_BROKEN_FILENAMES=1
COLORTERM=1
_=/usr/bin/env
oracle@linuxsrv:~>

Photoshop7 start problem

On my Windows Vista PC I run several Adobe programs: the CS3 suite, Illustrator9, Reader9, but also Photoshop7 and ImageReady7. Two days ago suddenly all Adobe programs refused to start, including the Reader . Apparently, there was a problem with the licences. I have downloaded the LicenceRecovery program from Adobe Support, and having run it, as expected, all programs did run again.......except for one: Photoshop7. Every time when I start the program, it begins loading all the necessary modules, but then a Windows error message appears, saying that the program stopped running, that there is a problem (?) and that I have to close the program.
I've tried several times to de-install and re-install Photoshop7 and ImageReady7 (they both came on the same disc). Every time Set-up congratulates me that I have succesfully installed the programs, while in fact the start problem persists. ImageReady starts, Photoshop does'nt. As Photoshop7 is now an oudated program, Adobe's helpdesk refuses me to help . I suspect that something in the Windows Registry has been corrupted (by LicenceRecovery?), but I have no idea where to look for. Has anyone encountered this problem before, and If so what was the solution?

Google is your friend.
https://discussions.apple.com/thread/1197195?start=0&tstart=0
Photoshop 7 no longer works in Leopard OSX 10.5
Photoshop 7 was released in March 2002, it is now 10 years old.
Sorry for your problems, but you have only 2 possible solutions:
Roll back the OS to an earlier version
Upgrade to a newer version of Photoshop (to save some money you could just get Photoshop Elements instead)
You might want to download a trial version to Photoshop Elements to see if it does what you need before spending any money.
Good Luck

CRS on Redhat 5 auto-start problem

Dear all
Recently I tried to install Oracle 10gR2 on Redhat 5. I did research and took all the necessary actions to install it on Redhat. Everything went well, according to the documents and at the end of the installation, all the resources were up and running. However, after the install, only the VIP was up and ONS and GSD was in unknown format. When I stop the nodeapps and start it again, everything stars working. It seems that the problem is something to do with boot process. I tried to put some delay ( for OCR mount ) but still no luck. This is the result from crsd.log from node1 when node2 is down.. :
2009-06-24 22:00:07.461: [ default][3594852768]0CRS Daemon Starting
2009-06-24 22:00:07.461: [ CRSMAIN][3594852768]0Checking the OCR device
2009-06-24 22:00:07.464: [ CRSMAIN][3594852768]0Connecting to the CSS Daemon
2009-06-24 22:00:07.838: [ COMMCRS][1103116608]clsc_connect: (0x151f20d0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:07.838: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:07.838: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:09.307: [ COMMCRS][1103116608]clsc_connect: (0x151f23b0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:09.307: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:09.307: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:10.773: [ COMMCRS][1103116608]clsc_connect: (0x151f25c0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:10.773: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:10.774: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:12.150: [ COMMCRS][1103116608]clsc_connect: (0x151f2880) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:12.150: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:12.150: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:19.093: [    CRSD][3594852768]0Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.1.0
2009-06-24 22:00:19.093: [    CRSD][3594852768]0Active Version and Software Version are same
2009-06-24 22:00:19.093: [ CRSMAIN][3594852768]0Initializing OCR
2009-06-24 22:00:19.098: [ OCRRAW][3594852768]proprioo: for disk 0 (/u02/oradata/orcl/OCRFile), id match (1), my id set (503252545,1028247821) total id sets (1), 1st set (503252545,1028247821), 2nd set (0,0) my votes (2), total votes (2)
2009-06-24 22:00:19.128: [ OCRMAS][1228994880]th_master:12: I AM THE NEW OCR MASTER at incar 1. Node Number = 1
2009-06-24 22:00:19.129: [ OCRRAW][1228994880]proprioo: for disk 0 (/u02/oradata/orcl/OCRFile), id match (1), my id set (503252545,1028247821) total id sets (1), 1st set (503252545,1028247821), 2nd set (0,0) my votes (2), total votes (2)
2009-06-24 22:00:19.144: [    CRSD][3594852768]0ENV Logging level for Module: allcomp 0
2009-06-24 22:00:19.144: [    CRSD][3594852768]0ENV Logging level for Module: default 0
2009-06-24 22:00:19.145: [    CRSD][3594852768]0ENV Logging level for Module: COMMCRS 0
2009-06-24 22:00:19.145: [    CRSD][3594852768]0ENV Logging level for Module: COMMNS 0
2009-06-24 22:00:19.146: [    CRSD][3594852768]0ENV Logging level for Module: CRSUI 0
2009-06-24 22:00:19.146: [    CRSD][3594852768]0ENV Logging level for Module: CRSCOMM 0
2009-06-24 22:00:19.148: [    CRSD][3594852768]0ENV Logging level for Module: CRSRTI 0
2009-06-24 22:00:19.148: [    CRSD][3594852768]0ENV Logging level for Module: CRSMAIN 0
2009-06-24 22:00:19.149: [ OCRSRV][1249974592]th_select_handler: Failed to retrieve procctx from ht. constr = [363817168] retval lht [-27] Signal CV.
2009-06-24 22:00:19.149: [    CRSD][3594852768]0ENV Logging level for Module: CRSPLACE 0
2009-06-24 22:00:19.149: [    CRSD][3594852768]0ENV Logging level for Module: CRSAPP 0
2009-06-24 22:00:19.150: [    CRSD][3594852768]0ENV Logging level for Module: CRSRES 0
2009-06-24 22:00:19.150: [    CRSD][3594852768]0ENV Logging level for Module: CRSOCR 0
2009-06-24 22:00:19.151: [    CRSD][3594852768]0ENV Logging level for Module: CRSTIMER 0
2009-06-24 22:00:19.151: [    CRSD][3594852768]0ENV Logging level for Module: CRSEVT 0
2009-06-24 22:00:19.152: [    CRSD][3594852768]0ENV Logging level for Module: CRSD 0
2009-06-24 22:00:19.153: [    CRSD][3594852768]0ENV Logging level for Module: CLUCLS 0
2009-06-24 22:00:19.154: [    CRSD][3594852768]0ENV Logging level for Module: OCRRAW 0
2009-06-24 22:00:19.155: [    CRSD][3594852768]0ENV Logging level for Module: OCROSD 0
2009-06-24 22:00:19.155: [    CRSD][3594852768]0ENV Logging level for Module: CSSCLNT 0
2009-06-24 22:00:19.156: [    CRSD][3594852768]0ENV Logging level for Module: OCRAPI 0
2009-06-24 22:00:19.157: [    CRSD][3594852768]0ENV Logging level for Module: OCRUTL 0
2009-06-24 22:00:19.158: [    CRSD][3594852768]0ENV Logging level for Module: OCRMSG 0
2009-06-24 22:00:19.159: [    CRSD][3594852768]0ENV Logging level for Module: OCRCLI 0
2009-06-24 22:00:19.159: [    CRSD][3594852768]0ENV Logging level for Module: OCRCAC 0
2009-06-24 22:00:19.160: [    CRSD][3594852768]0ENV Logging level for Module: OCRSRV 0
2009-06-24 22:00:19.160: [    CRSD][3594852768]0ENV Logging level for Module: OCRMAS 0
2009-06-24 22:00:19.161: [ CRSMAIN][3594852768]0Filename is /u01/app/crs/crs/init/rac1dr.pid
[ clsdmt][1417812288]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1drDBG_CRSD))
2009-06-24 22:00:19.506: [ CRSMAIN][3594852768]0Using Authorizer location: /u01/app/crs/crs/auth/
2009-06-24 22:00:19.760: [ CRSMAIN][3594852768]0Initializing RTI
2009-06-24 22:00:19.761: [CRSTIMER][1438792000]0Timer Thread Starting.
2009-06-24 22:00:19.770: [ CRSRES][3594852768]0Parameter SECURITY = 1, running in USER Mode
2009-06-24 22:00:19.770: [ CRSMAIN][3594852768]0Initializing EVMMgr
2009-06-24 22:00:19.996: [ COMMCRS][1449281856]clsc_connect: (0x15b1dc20) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth))
2009-06-24 22:00:21.860: [ CRSMAIN][3594852768]0CRSD locked during state recovery, please wait.
2009-06-24 22:00:22.494: [ CRSMAIN][3594852768]0CRSD recovered, unlocked.
2009-06-24 22:00:22.496: [ CRSMAIN][3594852768]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
2009-06-24 22:00:22.604: [ CRSMAIN][3594852768]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=rac1dr-priv)(PORT=49896))
2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0Starting Threads
2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0CRS Daemon Started.
2009-06-24 22:00:23.732: [ CRSRES][1554180416]0startRunnable: setting CLI values
2009-06-24 22:00:23.821: [ CRSRES][1554180416]0Attempting to start `ora.rac2dr.vip` on member `rac1dr`
2009-06-24 22:00:23.822: [ CRSRES][1543690560]0startRunnable: setting CLI values
2009-06-24 22:00:23.935: [ CRSRES][1543690560]0Attempting to start `ora.rac1dr.vip` on member `rac1dr`
2009-06-24 22:00:30.657: [ CRSRES][1554180416]0Start of `ora.rac2dr.vip` on member `rac1dr` succeeded.
2009-06-24 22:00:30.705: [ CRSRES][1543690560]0Start of `ora.rac1dr.vip` on member `rac1dr` succeeded.
2009-06-24 22:00:31.408: [ CRSRES][1554180416]0startRunnable: setting CLI values
2009-06-24 22:00:31.410: [ CRSRES][1543690560]0startRunnable: setting CLI values
2009-06-24 22:00:31.647: [ CRSRES][1554180416]0Attempting to start `ora.rac1dr.gsd` on member `rac1dr`
2009-06-24 22:00:31.708: [ CRSRES][1543690560]0Attempting to start `ora.rac1dr.ons` on member `rac1dr`
2009-06-24 22:00:32.538: [ CRSEVT][1554180416]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.rac1dr.gsd! (timeout=600)
2009-06-24 22:00:32.538: [ CRSAPP][1554180416]0StartResource error for ora.rac1dr.gsd error code = -2
2009-06-24 22:00:32.573: [ CRSEVT][1543690560]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.rac1dr.ons! (timeout=600)
2009-06-24 22:00:32.573: [ CRSAPP][1543690560]0StartResource error for ora.rac1dr.ons error code = -2
2009-06-24 22:00:32.737: [ CRSEVT][1554180416]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.rac1dr.gsd! (timeout=600)
2009-06-24 22:00:32.737: [ CRSAPP][1554180416]0StopResource error for ora.rac1dr.gsd error code = -2
2009-06-24 22:00:32.837: [ CRSEVT][1543690560]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.rac1dr.ons! (timeout=600)
2009-06-24 22:00:32.837: [ CRSAPP][1543690560]0StopResource error for ora.rac1dr.ons error code = -2
2009-06-24 22:00:32.873: [ CRSRES][1554180416]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2009-06-24 22:00:32.873: [ CRSRES][1554180416][ALERT]0`ora.rac1dr.gsd` on member `rac1dr` has experienced an unrecoverable failure.
2009-06-24 22:00:32.873: [ CRSRES][1554180416]0Human intervention required to resume its availability.
2009-06-24 22:00:32.921: [ CRSRES][1543690560]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2009-06-24 22:00:32.921: [ CRSRES][1543690560][ALERT]0`ora.rac1dr.ons` on member `rac1dr` has experienced an unrecoverable failure.
2009-06-24 22:00:32.921: [ CRSRES][1543690560]0Human intervention required to resume its availability.
Any help is highly appreciated.
Kamy

CRS on RHEL 5.5 auto-start problem
hi all
Recently I install RAC Oracle 10gR2 on Red hat RHEL 5.5. “Two node cluster, iscsi storage, ocfs2 mounted files & ASM ”
I did research and took all the necessary actions to install it on Red hat. Everything went well, according to the documents and at the end of the installation, all the resources were up and running. However, after the install, only the VIP was up and ONS and GSD ,ASM and the other services was in unknown state. When I stop the CRS & start it –all again, everything stars working. Please friends I need to fix this problem because the cluster services and the client workstation are stopping when the servicers is relocated to node 1 after the server reboot because the CRS did not worked still on node and manual starting is taking time.
This is the result from crsd.log from node1 when node is online .
Name Type Target State Host
ora....SM1.asm      application ONLINE UNKNOWN linux1
ora....X1.lsnr      application ONLINE UNKNOWN linux1
ora.linux1.gsd     application ONLINE UNKNOWN linux1
ora.linux1.ons      application ONLINE UNKNOWN linux1
ora.linux1.vip     application ONLINE ONLINE linux1
ora....SM2.asm     application ONLINE ONLINE linux2
ora....X2.lsnr      application ONLINE ONLINE linux2
ora.linux2.gsd      application ONLINE ONLINE linux2
ora.linux2.ons     application ONLINE ONLINE linux2
ora.linux2.vip      application ONLINE ONLINE linux2
ora.mutdb.db      application ONLINE ONLINE linux2
ora....b1.inst      application ONLINE OFFLINE
ora....b2.inst      application ONLINE ONLINE linux2
ora...._taf.cs      application ONLINE ONLINE linux2
ora....db1.srv      application ONLINE UNKNOWN linux1
ora....db2.srv      application ONLINE ONLINE linux2
############################### CRS Log ON Node 1 ##################################
2010-05-27 11:54:57.357: [ default][3741415840][ENTER]0
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2004, Oracle. All rights reserved
2010-05-27 11:54:57.366: [ default][3741415840]0CRS Daemon Starting
2010-05-27 11:54:57.366: [ CRSMAIN][3741415840]0Checking the OCR device
2010-05-27 11:54:57.379: [ CRSMAIN][3741415840]0Connecting to the CSS Daemon
2010-05-27 11:54:57.783: [ COMMCRS][1107867968]clsc_connect: (0x8481ce0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:54:57.783: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:54:57.783: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:54:59.182: [ COMMCRS][1107867968]clsc_connect: (0x8481f60) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:54:59.182: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:54:59.182: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:55:00.569: [ COMMCRS][1107867968]clsc_connect: (0x84821f0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:55:00.569: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:55:00.569: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:55:01.954: [ COMMCRS][1107867968]clsc_connect: (0x84824b0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:55:01.954: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:55:01.954: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:55:05.924: [    CRSD][3741415840]0Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.1.0
2010-05-27 11:55:05.924: [    CRSD][3741415840]0Active Version and Software Version are same
2010-05-27 11:55:05.924: [ CRSMAIN][3741415840]0Initializing OCR
2010-05-27 11:55:05.937: [ OCRRAW][3741415840]proprioo: for disk 0 (/u02/OCR_1.dbf), id match (1), my id set (1273042630,1936275375) total id sets (1), 1st set (1273042630,1936275375), 2nd set (0,0) my votes (1), total votes (2)
2010-05-27 11:55:05.938: [ OCRRAW][3741415840]proprioo: for disk 1 (/u03/OCR_2.dbf), id match (1), my id set (1273042630,1936275375) total id sets (1), 1st set (1273042630,1936275375), 2nd set (0,0) my votes (1), total votes (2)
2010-05-27 11:55:05.981: [    CRSD][3741415840]0ENV Logging level for Module: allcomp 0
2010-05-27 11:55:05.983: [    CRSD][3741415840]0ENV Logging level for Module: default 0
2010-05-27 11:55:05.994: [    CRSD][3741415840]0ENV Logging level for Module: COMMCRS 0
2010-05-27 11:55:05.996: [    CRSD][3741415840]0ENV Logging level for Module: COMMNS 0
2010-05-27 11:55:05.999: [    CRSD][3741415840]0ENV Logging level for Module: CRSUI 0
2010-05-27 11:55:06.001: [    CRSD][3741415840]0ENV Logging level for Module: CRSCOMM 0
2010-05-27 11:55:06.003: [    CRSD][3741415840]0ENV Logging level for Module: CRSRTI 0
2010-05-27 11:55:06.006: [    CRSD][3741415840]0ENV Logging level for Module: CRSMAIN 0
2010-05-27 11:55:06.008: [    CRSD][3741415840]0ENV Logging level for Module: CRSPLACE 0
2010-05-27 11:55:06.010: [    CRSD][3741415840]0ENV Logging level for Module: CRSAPP 0
2010-05-27 11:55:06.012: [    CRSD][3741415840]0ENV Logging level for Module: CRSRES 0
2010-05-27 11:55:06.015: [    CRSD][3741415840]0ENV Logging level for Module: CRSOCR 0
2010-05-27 11:55:06.017: [    CRSD][3741415840]0ENV Logging level for Module: CRSTIMER 0
2010-05-27 11:55:06.019: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [148436880] retval lht [-27] Signal CV.
2010-05-27 11:55:06.019: [    CRSD][3741415840]0ENV Logging level for Module: CRSEVT 0
2010-05-27 11:55:06.022: [    CRSD][3741415840]0ENV Logging level for Module: CRSD 0
2010-05-27 11:55:06.024: [    CRSD][3741415840]0ENV Logging level for Module: CLUCLS 0
2010-05-27 11:55:06.027: [    CRSD][3741415840]0ENV Logging level for Module: OCRRAW 0
2010-05-27 11:55:06.029: [    CRSD][3741415840]0ENV Logging level for Module: OCROSD 0
2010-05-27 11:55:06.032: [    CRSD][3741415840]0ENV Logging level for Module: CSSCLNT 0
2010-05-27 11:55:06.034: [    CRSD][3741415840]0ENV Logging level for Module: OCRAPI 0
2010-05-27 11:55:06.036: [    CRSD][3741415840]0ENV Logging level for Module: OCRUTL 0
2010-05-27 11:55:06.039: [    CRSD][3741415840]0ENV Logging level for Module: OCRMSG 0
2010-05-27 11:55:06.041: [    CRSD][3741415840]0ENV Logging level for Module: OCRCLI 0
2010-05-27 11:55:06.043: [    CRSD][3741415840]0ENV Logging level for Module: OCRCAC 0
2010-05-27 11:55:06.046: [    CRSD][3741415840]0ENV Logging level for Module: OCRSRV 0
2010-05-27 11:55:06.048: [    CRSD][3741415840]0ENV Logging level for Module: OCRMAS 0
2010-05-27 11:55:06.048: [ CRSMAIN][3741415840]0Filename is /u01/app/crs/crs/init/linux1.pid
[ clsdmt][1401583936]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=linux1DBG_CRSD))
2010-05-27 11:55:06.119: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149741888] retval lht [-27] Signal CV.
2010-05-27 11:55:07.002: [ CRSMAIN][3741415840]0Using Authorizer location: /u01/app/crs/crs/auth/
2010-05-27 11:55:07.008: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149755728] retval lht [-27] Signal CV.
2010-05-27 11:55:07.230: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149740416] retval lht [-27] Signal CV.
2010-05-27 11:55:07.380: [ CRSMAIN][3741415840]0Initializing RTI
2010-05-27 11:55:07.380: [CRSTIMER][1422563648]0Timer Thread Starting.
2010-05-27 11:55:07.386: [ CRSRES][3741415840]0Parameter SECURITY = 1, running in USER Mode
2010-05-27 11:55:07.386: [ CRSMAIN][3741415840]0Initializing EVMMgr
2010-05-27 11:55:07.453: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150974816] retval lht [-27] Signal CV.
2010-05-27 11:55:07.474: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150975552] retval lht [-27] Signal CV.
2010-05-27 11:55:07.485: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150988032] retval lht [-27] Signal CV.
2010-05-27 11:55:07.723: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150998720] retval lht [-27] Signal CV.
2010-05-27 11:55:07.734: [ CRSMAIN][3741415840]0CRSD locked during state recovery, please wait.
2010-05-27 11:55:07.737: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150997792] retval lht [-27] Signal CV.
2010-05-27 11:55:07.923: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [151007072] retval lht [-27] Signal CV.
2010-05-27 11:55:08.032: [ CRSMAIN][3741415840]0CRSD recovered, unlocked.
2010-05-27 11:55:08.032: [ CRSMAIN][3741415840]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
2010-05-27 11:55:08.051: [ CRSMAIN][3741415840]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=linux1-priv)(PORT=49896))
2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0Starting Threads
2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0CRS Daemon Started.
2010-05-27 11:55:08.204: [ CRSRES][1527462208]0StopResource: setting CLI values
2010-05-27 11:55:08.220: [ CRSRES][1527462208]0Attempting to stop `ora.linux1.vip` on member `linux2`
2010-05-27 11:55:08.515: [ CRSRES][1527462208]0Stop of `ora.linux1.vip` on member `linux2` succeeded.
2010-05-27 11:55:08.529: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:08.529: [ CRSRES][1527462208]0Attempting to start `ora.linux1.vip` on member `linux1`
2010-05-27 11:55:08.686: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154566384] retval lht [-27] Signal CV.
2010-05-27 11:55:14.000: [ CRSRES][1527462208]0Start of `ora.linux1.vip` on member `linux1` succeeded.
2010-05-27 11:55:14.231: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:14.272: [ CRSRES][1527462208]0Attempting to start `ora.linux1.LISTENER_LINUX1.lsnr` on member `linux1`
2010-05-27 11:55:14.426: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.linux1.LISTENER_LINUX1.lsnr! (timeout=600)
2010-05-27 11:55:14.426: [ CRSAPP][1527462208]0StartResource error for ora.linux1.LISTENER_LINUX1.lsnr error code = -2
2010-05-27 11:55:14.489: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.linux1.LISTENER_LINUX1.lsnr! (timeout=600)
2010-05-27 11:55:14.489: [ CRSAPP][1527462208]0StopResource error for ora.linux1.LISTENER_LINUX1.lsnr error code = -2
2010-05-27 11:55:14.495: [ CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:14.495: [ CRSRES][1527462208][ALERT]0`ora.linux1.LISTENER_LINUX1.lsnr` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:14.495: [ CRSRES][1527462208]0Human intervention required to resume its availability.
2010-05-27 11:55:14.628: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:14.698: [ CRSRES][1527462208]0Attempting to start `ora.linux1.ASM1.asm` on member `linux1`
2010-05-27 11:55:14.836: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.linux1.ASM1.asm! (timeout=600)
2010-05-27 11:55:14.836: [ CRSAPP][1527462208]0StartResource error for ora.linux1.ASM1.asm error code = -2
2010-05-27 11:55:14.875: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.linux1.ASM1.asm! (timeout=600)
2010-05-27 11:55:14.875: [ CRSAPP][1527462208]0StopResource error for ora.linux1.ASM1.asm error code = -2
2010-05-27 11:55:14.881: [ CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:14.881: [ CRSRES][1527462208][ALERT]0`ora.linux1.ASM1.asm` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:14.881: [ CRSRES][1527462208]0Human intervention required to resume its availability.
2010-05-27 11:55:15.051: [ CRSRES][1527462208]0CRS-1028: Dependency analysis failed because of:
'Resource in UNKNOWN state: ora.linux1.ASM1.asm'
2010-05-27 11:55:15.185: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:15.237: [ CRSRES][1537952064]0startRunnable: setting CLI values
2010-05-27 11:55:15.306: [ CRSRES][1558931776]0startRunnable: setting CLI values
2010-05-27 11:55:15.339: [ CRSRES][1527462208]0Attempting to start `ora.linux1.gsd` on member `linux1`
2010-05-27 11:55:15.397: [ CRSRES][1537952064]0Attempting to start `ora.linux1.ons` on member `linux1`
2010-05-27 11:55:15.407: [ CRSRES][1558931776]0Attempting to start `ora.mutdb.mutdb_taf.mutdb1.srv` on member `linux1`
2010-05-27 11:55:15.789: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.linux1.gsd! (timeout=600)
2010-05-27 11:55:15.789: [ CRSAPP][1527462208]0StartResource error for ora.linux1.gsd error code = -2
2010-05-27 11:55:15.808: [ CRSEVT][1537952064]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.linux1.ons! (timeout=600)
2010-05-27 11:55:15.808: [ CRSAPP][1537952064]0StartResource error for ora.linux1.ons error code = -2
2010-05-27 11:55:15.812: [ CRSEVT][1558931776]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.mutdb.mutdb_taf.mutdb1.srv! (timeout=600)
2010-05-27 11:55:15.812: [ CRSAPP][1558931776]0StartResource error for ora.mutdb.mutdb_taf.mutdb1.srv error code = -2
2010-05-27 11:55:15.838: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.linux1.gsd! (timeout=600)
2010-05-27 11:55:15.838: [ CRSAPP][1527462208]0StopResource error for ora.linux1.gsd error code = -2
2010-05-27 11:55:15.844: [ CRSEVT][1537952064]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.linux1.ons! (timeout=600)
2010-05-27 11:55:15.845: [ CRSAPP][1537952064]0StopResource error for ora.linux1.ons error code = -2
2010-05-27 11:55:15.849: [ CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:15.849: [ CRSRES][1527462208][ALERT]0`ora.linux1.gsd` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:15.849: [ CRSRES][1527462208]0Human intervention required to resume its availability.
2010-05-27 11:55:15.859: [ CRSEVT][1558931776]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.mutdb.mutdb_taf.mutdb1.srv! (timeout=600)
2010-05-27 11:55:15.860: [ CRSAPP][1558931776]0StopResource error for ora.mutdb.mutdb_taf.mutdb1.srv error code = -2
2010-05-27 11:55:15.863: [ CRSRES][1537952064]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:15.863: [ CRSRES][1537952064][ALERT]0`ora.linux1.ons` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:15.863: [ CRSRES][1537952064]0Human intervention required to resume its availability.
2010-05-27 11:55:15.869: [ CRSRES][1558931776]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:15.869: [ CRSRES][1558931776][ALERT]0`ora.mutdb.mutdb_taf.mutdb1.srv` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:15.869: [ CRSRES][1558931776]0Human intervention required to resume its availability.
2010-05-27 11:55:20.450: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154578560] retval lht [-27] Signal CV.
2010-05-27 11:55:21.130: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154578560] retval lht [-27] Signal CV.
I tired this solution it was on website “but it did not work”
下面是METALINK给出的解释：
I have checked the information provided. crsd is reporting timeouts when running the checking actions. The racgmain process on the other hand, executed by racgwrap, remain running so the number is increasing.This issue has been reported in Bug 7009245 ""RACGMAIN CHECK" PROCESS NOT TERMINATING", and drill down and determine the root cause this require to get a stack trace from racgmain process(es) as well as you should runOSWatcher with a specific parameters, finally the issue of Bug 7009245 has been fixed by the fix of Bug 6196746 (unpublished bug -- summary is "racgwrap spawns racgmain child process. crsd timeout kills racgwrap but bot racgmain")So please perform the following action plan that intend to solve the issue.
.ACTION PLAN
============
1. Stop CRS on this node.
2. Make a copy of racgwrap located under $ORACLE_HOME/bin and $CRS_HOME/bin
3. Edit the file racgwrap and modify the last 3 lines from:
.$ORACLE_HOME/bin/racgmain "$@"
status=$?
exit $status
.to:
.# Line added to test fix for Bug 6196746
exec $ORACLE_HOME/bin/racgmain "$@"
.4. Restart CRS and make sure that all the resources are startes
This should solve the issue. also if you are not able to stop CRS right now, you can try the
solution without crs stop/start.
BUT IT DID NOT WORK
###################################################3

Lsnrctl start/stop "message not found" errors

When I installed 10g I selected a global database name of 'orcl.clearbean.com' and a sid of 'dev1'. Below are my environment variables, tnsnames.ora file and listener.ora file. I can connect and use the database, but I am getting errors messages when I do a lsnrctl stop/start. I am running Oracle and Apache together on a server running Fedora Core 4 (linux). Any help would be greatly appreciated.
Supporting information:
[oracle@emerson ~]$ env | grep ORA
ORACLE_SID=dev1
ORACLE_BASE=/u01/app/oracle
ORACLE_TERM=xterm
ORACLE_HOME=/u01/app/oracle/product/10.1.0/db_1
[oracle@emerson ~]$ cat $ORACLE_HOME/network/admin/tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = emerson.clearbean.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.clearbean.com)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
[oracle@emerson ~]$ cat $ORACLE_HOME/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = emerson.clearbean.com)(PORT = 1521))
[oracle@emerson ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.1.0.2.0 - Production on 07-OCT-2005 01:19:22
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Message 1053 not found; No message file for product=network, facility=TNSTNS-12541: Message 12541 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
TNS-00511: Message 511 not found; No message file for product=network, facility=TNS
Linux Error: 2: No such file or directory
Message 1053 not found; No message file for product=network, facility=TNSTNS-12541: Message 12541 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
TNS-00511: Message 511 not found; No message file for product=network, facility=TNS
Linux Error: 111: Connection refused
[oracle@emerson ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.1.0.2.0 - Production on 07-OCT-2005 01:19:30
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Message 1070 not found; No message file for product=network, facility=TNSTNSLSNR for Linux: Version 10.1.0.2.0 - Production
Message 459 not found; No message file for product=network, facility=NL
Message 279 not found; No message file for product=network, facility=NL
Message 1073 not found; No message file for product=network, facility=TNSMessage 1073 not found; No message file for product=network, facility=TNS
Message 1053 not found; No message file for product=network, facility=TNSMessage 1020 not found; No message file for product=network, facility=TNSMessage 1021 not found; No message file for product=network, facility=TNSMessage 1022 not found; No message file for product=network, facility=TNSMessage 1023 not found; No message file for product=network, facility=TNSMessage 1026 not found; No message file for product=network, facility=TNSMessage 1034 not found; No message file for product=network, facility=TNSMessage 1024 not found; No message file for product=network, facility=TNSMessage 1025 not found; No message file for product=network, facility=TNSMessage 1040 not found; No message file for product=network, facility=TNSMessage 1033 not found; No message file for product=network, facility=TNSMessage 1028 not found; No message file for product=network, facility=TNSMessage 1415 not found; No message file for product=network, facility=TNS Message 1050 not found; No message file for product=network, facility=TNS
Message 1050 not found; No message file for product=network, facility=TNS
Message 1029 not found; No message file for product=network, facility=TNSMessage 1411 not found; No message file for product=network, facility=TNS
Message 1408 not found; No message file for product=network, facility=TNS
Message 1052 not found; No message file for product=network, facility=TNS[oracle@emerson ~]$

Thx for the feedback; however after defining TNS_ADMIN and turning of the firewall I am still getting the message errors. Any other suggestions?
[oracle@emerson ~]$ ls $ORACLE_HOME
admin emerson.clearbean.com_dev1 ldap oraInst.loc sqlj
assistants flash_recovery_area lib ord sqlplus
bin has md oui srvm
cdata hs mesg owm sysman
cfgtoollogs install mgw perl uix
config install.platform network plsql ultrasearch
css inventory nls precomp wwg
ctx javavm oc4j racg xdk
dbs jdbc olap rdbms
demo jdk OPatch relnotes
diagnostics jlib opmn root.sh
dm jre oracore slax
[oracle@emerson ~]$ ls $TNS_ADMIN
listener.ora samples sqlnet.ora tnsnames.ora.orig
listener.ora.orig shrept.lst tnsnames.ora
[oracle@emerson ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.1.0.2.0 - Production on 07-OCT-2005 22:43:44
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Message 1053 not found; No message file for product=network, facility=TNSMessage 1052 not found; No message file for product=network, facility=TNS[oracle@emerson ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.1.0.2.0 - Production on 07-OCT-2005 22:43:51
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Message 1070 not found; No message file for product=network, facility=TNSTNSLSNR for Linux: Version 10.1.0.2.0 - Production
Message 459 not found; No message file for product=network, facility=NL
Message 279 not found; No message file for product=network, facility=NL
Message 1073 not found; No message file for product=network, facility=TNSMessage 1073 not found; No message file for product=network, facility=TNS
Message 1053 not found; No message file for product=network, facility=TNSMessage 1020 not found; No message file for product=network, facility=TNSMessage 1021 not found; No message file for product=network, facility=TNSMessage 1022 not found; No message file for product=network, facility=TNSMessage 1023 not found; No message file for product=network, facility=TNSMessage 1026 not found; No message file for product=network, facility=TNSMessage 1034 not found; No message file for product=network, facility=TNSMessage 1024 not found; No message file for product=network, facility=TNSMessage 1025 not found; No message file for product=network, facility=TNSMessage 1040 not found; No message file for product=network, facility=TNSMessage 1033 not found; No message file for product=network, facility=TNSMessage 1028 not found; No message file for product=network, facility=TNSMessage 1415 not found; No message file for product=network, facility=TNS Message 1050 not found; No message file for product=network, facility=TNS
Message 1050 not found; No message file for product=network, facility=TNS
Message 1029 not found; No message file for product=network, facility=TNSMessage 1411 not found; No message file for product=network, facility=TNS
Message 1408 not found; No message file for product=network, facility=TNS
Message 1052 not found; No message file for product=network, facility=TNS[oracle@emerson ~]$

SSH hangs when LSNRCTL start

Hi,
When i give
ssh -l finmasd3 asgard '. ./.profile;
lsnrctl start APPS_masd3'
from remote machine with valid access to the server
It hangs and doesnt return. BUt listener is started in the remote machine.
i have tried giving & in the end, and gave two commands instead of one( start and status).
I have a web tier and database tier. i start listener on the database tier from web tier .
thanks

The programs you are starting are probably keeping stdout and/or stderr open to put messages out to.
Try redirecting stdout/stderr to a file or /dev/null
You can also try adding -n to the ssh command which redirects stdin for you.

Are you guys going to fix the iTunes 10.5 start problem for Windows 64?

Windows 7 , 64 bit. If you have any connection at all to the Internet, I am sure you are aware of the iTunes not starting problem. ALL the suggested fixes are useless for some...uninstall, reinstall, drive wipe, reboot, registry edit, registry cleaners.....all to no avail. APPLE stuff is supposed to work....I have 2 new phones here that require 10.5 to work......blah. When you click the icon, or try to start from the .exe for that matter, it appears like it is about to start...and then nothing......if you check task manager, you can see it is running.......I have tried every permutation of a fix, including wiping the hard drive and reinstalling Win7 and updating......no good
Come on APPLE fix this problem......dont make me buy android phones.......

On the "flip-side", I had the smoothest and quickest iTunes upgrade/install ever. This was on my Windows 7 Professional, 64bit system.
That you performed an assumedly 'clean' reinstall of your OS, is not a good sign. Obviously, iTunes doesn't like something within your system.
Here are the next steps that I would take if in your position:
- Are you absolutely positive that you have the 64bit version of iTunes?
- Re-download a new copy of the 64bit version of iTunes 10.5
- Try downloading iTunes from one of the 'mirror sites' - FileHippo is good
- Call your PC's manufacturer and see if they are aware of any conflicts with your specific machine's build with respect to iTunes
- Temporarily use another PC (if available) to get your iPhones up and running
Best of Luck

Lsnrctl start newlist, TNS-12560: TNS:protocol adapter error

Hello I am using Windows 7. Oracle 11g R2. Firstly I created my directory C:\oracle\net. Then I created an entry for TNSADMIN in the windows registry entering the newly created c:\oracle\net.
I ran Oracle Net Manager. The path C:\oracle\net is displayed in the title bar.
Using Oracle Net Manager I created my listener with the following settings as saved to listener.ora in the C:\oracle\net directory
# listener.ora Network Configuration File: C:\oracle\net\listener.ora
# Generated by Oracle configuration tools.
ADR_BASE_NEWLIST = C:\app\oracle\product\11.2.0\dbhome_2\log
NEWLIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 2521))
From the command line prompt I type ......
lsnrctl start newlist
The following is returned
starting tnslnsr: please wait...
followed by
TNS-12560: TNS:protocol adapter error
TNS-00530: TNS:protocol adapter error
??? How do I resolve this? thanks

The above scenario is part of a learning exercise (ex6.1) from the chapter on configuring the Oracle Net Environment OCA Oracle Database 11g Administration I Exam Guide by John Watson from the Oracle Press series.
127.0.0.1 is the loopback address of (all) local machines.
This step is step 16 of the learning exercise. Until I resolve it I cannot complete the remaining steps!
The steps of the exercise are as below..........................
Configure Oracle Net
In this exercise, you will set up a complete Oracle Net environment, using graphical
and command-line tools. Where there are differences between Windows and Linux,
these will be pointed out.
1. Create a directory to be used for the Oracle Net configuration files, and set
the TNS_ADMIN variable to point to this. It doesn’t matter where the direc-
tory is, as long as the Oracle user has permission to create, read, and write it.
On Linux:
mkdir /u01/oracle/net
export TNS_ADMIN=/u01/oracle/net
Ensure that all work from now is done from a session where the variable has
been set.
On Windows:
mkdir d:\oracle\net
Create and set the key TNS_ADMIN as a string variable in the registry in
the Oracle Home branch. This will typically be
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_OraDb1g_home1
2. Check that the variable is being read by using the TNSPING command from
an operating system prompt:
tnsping orcl
This will return an error “TNS-03505: Failed to resolve name” because there
are no files in the TNS_ADMIN directory. On Windows, you may need to
launch a new command prompt to pick up the new TNS_ADMIN value from
the registry.
3. Start the Net Manager. On Linux, run netmgr from an operating system
prompt; on Windows, launch it from the Start menu. The top line of the Net
Manager window will show the location of the Oracle Net files. If this is not
the new directory, then the TNS_ADMIN variable has not been set correctly.
4. Create a new listener: expand the Local branch of the navigation tree,
highlight Listeners, and click the +.
5. Enter a listener name, NEWLIST, and click OK.
6. Click Add Address.
7. For Address 1, choose TCP/IP as the protocol and enter 127.0.0.1 as the
host, 2521 as the port. The illustration that follows shows the result.
8. Create a new service name: highlight Service Naming in the navigation tree,
and click the +.
9. Enter NEW as the net service name, and click Next.
10. Select TCP/IP as the protocol, and click Next.
11. Enter 127.0.0.1 as the host name and 2521 as the port and click Next.
12. Enter SERV1 as the Service Name, and click Next.
13. Click Finish. If you try the test, it will fail at this time. The illustration that
follows shows the result.
14. Save the configuration by clicking File and Save Network Configuration.
This will create the listener.ora and tnsnames.ora files in the
TNS_ADMIN directory.
15. Use an editor to check the two files. They will look like this:
LISTENER.ORA:
NEWLIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 2521))
TNSNAMES.ora:
NEW =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT =
2521))
(CONNECT_DATA =
(SERVICE_NAME = SERV1)
16. From an operating system prompt, start the listener with lsnrctl start
newlist.
17. From an operating system prompt, test the connect string with tnsping new.
000
18. Connect to your database using operating system authentication, bypassing
any listener, with sqlplus / as sysdba.
19. Set the service_names and local_listener parameters for the running
instance (memory only, not the parameter file) and register the new service
name with the new listener:
alter system set service_names=serv1 scope=memory;
alter system set local_listener=new scope=memory;
alter system register;
20. From an operating system prompt, confirm that the new service has registered
with the new listener with lsnrctl services newlist.
21. Confirm that the new network environment is functional by logging on:
sqlplus system/oracle@new

Cold start problems...?

I know it sounds ridiculous, but my computers are used to work in pretty warm environment. Now, since we have those low temperatures in Florida, especially over night, I experience a lot of problems with starting them. Can it be some internal battery problems ?
Quicksilver 933: Would keep on coming up with the "You need to restart your computer" - message after seconds of spinning the start wheel (grey screen with apple symbol). Guess what.. I though, the HD is done, took it out, put it into my double processor and ran DW on it with no problem. It appeared on the desktop. Put it back into the Quicksilver and the starting problem occurs again.
iBook G4: No way to get it started. It turns the starting wheel for minutes and then the blue screen appears, where you can move the cursor, but that's it...tried 15 times, no change.
Anybody with an idea ?
Thanks
bafomet

Well.. I lived all my life in Europe (Germany) and know what kind of cold you are talking about. But it really feels cold after years in Florida, what happens right now..
In the meantime I tried more options with no results. Restarted from the CD, was able to run DW and Disk Utility on both computers and didn't get them to run.. The iBook came up with an index code failure, but amazingly you can run DiskWarrior and it seems no problem..
I wouldn't know how to run Hardware Test, if they are not starting..
Thanks
bafomet
P.S. Have another issue now on my double G4 with node system failure... crazy... Have 4 macs at home and just one barely runs, the one I'm writing from. I really didn't want to blame the cold but now they are 3...

MSI NX8800GT-T2D1GE-OC Starting Problems

Sinds yesterday i got starting problems with my pc.. well it didnt start at all. So i started to trace the problem and switching out part.. and i finally traced the problem to my grafics card. When i put another grafics card in my pc i boots up no problem but when i put my NX8800GT-T2D1GE-OC back in it just wont boot. when i try my NX8800GT-T2D1GE-OC in another pc that pc wont startup at all. so any1 know whats wrong with my Grafics card? it looks just fine and as far as i know nothing happend to it.
System Specs:
Cpu    Intel Core 2 Quad Q6600 OCed At 3,4 Ghz
Motherboard    ASUS Striker II Formula
Memory    2x OCZ SLI XTC 2 GB DDR2-1066 CL5 kit
Grafics Card    MSI NX8800GT-T2D1GE-OC
HardDisk    Western Digital Caviar RE2 500 GB SATA2
DvD Drive    ASUS DRW-1814BL Silver
Soundcard:    SupremeFX
Case:    Aerocool AeroEngine II Silver
Powersupply:    Gigabyte ODIN Pro 800W
Cpu Cooling: XSPC WaterBlock
Screen:    Sony SDM-S74
Keyboard:    Logitech G11 Gaming Keyboard
Mouse:    Logitech G5 Gaming Laser Mouse
Speakers:    Creative Inspire P580
Casefans:   4x Zalman ZM-F3 120 mm Blue
OS:   Windows Vista Ultimate
Other components:
Zalman ZM-MFC1 Plus Fancontroller
Ocz Geheugen Koeler

Quote from: BOSSKILLER on 21-June-08, 20:41:36
Did you hear any beeps?
Make sure that VGA is sitting very well into PCI-E slot.
Have you done >>Clear CMOS Guide<< yet?
No i didnt but i dont have a speaker attached. i got a little lcd thats shows the boot sequence. when i try to start it with my card it it keeps saying: Initalising CPU. so i doesn't even start up with the card attached. when i disconnect the card the boot sequence goes normal. also i reseated the card many times and i tried different pci-e slots on my motherboard. nothing helps. i hope we can figure it out.. im afraid just broken somehow..although i wouldn't know what happend.
Also ive tried clearing the bios.. i tried everything i can think off.

DB Starting Problem

i faced the following error:
ERROR:
ORA-12505: TNS:listener could not resolve SID given in connect descriptor
i want to tell you that i faced this error on the DB server more than 10 times within one Month and.
i know that we can solve this problem by starting the DB Manually..
but i want it from you to tell me whats the mainly reason for this problem because i want to solve it permanently.
can any body help me by giving me the mainly reasons for this problem.
thanks alot

Oracle says....
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
Cause: The listener received a request to establish a connection to a database or other service. The connect descriptor received by the listener specified a SID for an instance (usually a database instance) that either has not yet dynamically registered with the listener or has not been statically configured for the listener. This may be a temporary condition such as after the listener has started, but before the database instance has registered with the listener.
Action:
- Wait a moment and try to connect a second time.
- Check which instances are currently known by the listener by executing: lsnrctl services <listener name>
- Check that the SID parameter in the connect descriptor specifies an instance known by the listener.
- Check for an event in the listener.log file.
You are saying that starting DB will solve the problem. This means that when you start database PMON process will register your database with the default listener LISTENER. After that you can connect to the database. This PMON registration of database with LISTENER is called as dynamic registration. As concern to static registration you should enter the database entry in listener.ora as follows....
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = ITDEV) # static registration entry...
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
Hope the above is clear.
[ By seeing your previous posts ]
Next issue, suppose you want to start your database when your system is up ? It is possible to do so.. I think you are using windows... Find out the service OracleServiceITDEV. Make it automatic, so it will start when system comes up.
By default database should start up when the service gets started. We have one more option, we can say ok, I don't my database to open when the service gets start. I think currently in your case it is configured as this. When service is starting, it is not starting the database. We can change this database startup mode by oradim.
To change from manual startup to auto..
c:\> oradim -edit -sid ITDEV -startmode auto
To change from auto startup to manual..
c:\> oradim -edit -sid ITDEV -startmode manual.
Try to understand the things, try to troubleshoot the problem from every way possible. Check if your listener service is up or not. Check its status....
Hope you understand my explanation and good luck for future endeavors.

Lsnrctl start problem

Similar Messages

Maybe you are looking for