Lync 2013 - Presence not showing in SharePoint 2010

Hello,
Presence was showing while on Lync 2010 and Office 2010 but at some point we lost the jellybean presence.
We recently upgraded to Lync 2013 and O365. Yet our SharePoint 2010 libraries are no longer showing the presence next to Modifiied By or Created By.
I've checked CA and presence is enabled. AcriveX add-in ia as well.
Thank you,
Andrea

Hi,
Did the Lync Server 2013 install On-Premises or online?
If it is On-Premises deployment, Presence is displayed by using an ActiveX® control and Lync APIs.
Please check if the Office to be the Latest version, if not, update it and test again.
If it is Lync online, you can also post a question on Office365 forum for assistance. Thank you for your understanding.
http://community.office365.com/en-us/forums/163/categories.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

Lync 2013 do not show own photo

We have Lync 2013 and Exchange 2010. I imported photos to our AD. In Outlook 2010 we can see our own photo, but Lync 2013 client do not display user own photo, but when user1
write a message to user2, user2 receive message with user1 photo. This is a global problem, not for one user.
Can you help me in this case, because I didn't find any useful information?

Ben, thank you for quick response.
Our client policy:
Identity
DisplayPhoto
Global
AllPhotos
I imported only 96x96 pixels size photo. I also tried to import photo manually, but it not make any change in this problem.
Import-RecipientDataProperty -Identity "Name Lastname" -Picture -FileData ([Byte[]]$(Get-Content -Path "C:\user.jpg" -Encoding Byte -ReadCount 0))
If Lync 2013 user type his name in Lync search field and open his contact in Lync 2013 client, he able to see
his photo, company name, phone numbers and etc...
Lync 2013 clients and server have installed latest updates.

AD Security Group name change not showing in Sharepoint 2010

Hi!
We have a Sharepoint 2010 Standard enviroment and are heading for a role-based identity-managment in our company. That's why we find it better to use AD Groups instead of Sharepoint Groups.
So we have over 1000 AD Security Groups groups that have been added to our Sharepoint Sites and our goal is to control every permission in Sharepoint from AD.
I have done all this with the combination of Excel and Powershell and it have worked great.
The problem i see in the long run is the name change of AD Security Groups. Sharepoint 2010 isn't showing the new name of the group.
Does anyone know of any workaround that can solve this problem. It's a bit of a disappointment that Microsoft haven't fixed this. The only information i think they should store in Sharepoint is the SID of the groups.
I was thinking of designing a powershell script that runs every night and updates the display name of the groups that do not match the AD display name.
Is there any other way?

As far as I know, and I'm not sure where to go from here without testing on my own...and I'm not sure when I'll be able to do that. Perhaps a configuration issue.
Have you tried removing the incorrectly named group and adding in the correctly named one?
Read through this related post:
http://social.msdn.microsoft.com/Forums/en-US/sharepoint2010general/thread/49dc833f-4127-45ac-bd21-98b04d3632ef
Looks like that can help you. Let us know how things go.
Colorless Green Ideas Sleep Furiously http://www.sharepointnerd.com

Lync 2013 does not show normalized numbers in the client contact card.

Hi,
We are migrating from OCS 2007 to Lync 2013. Everything runs now in side by side topology.
I have problems with contacts numbers shown in the Lync client.
I've moved "Company_Phone_Number_Normalization_Rules.txt" file from OCS server to Lync. All rules works fine there, after running update-csaddressbook , Invalid_AD_Phone_Numbers.txt file is empty (no errors).
We are using this format in AD for users: (613) 123-4567 Xdddd
Normalization rule is:
(\s*)$?\s*(613)\s*$?[\s()\-\./]*(123)[\s()\-\./]*(4567)[,\s\w]*(\d\d\d\d)
+$5
So it will normalize phone (613) 123-4567 X5656 to +5656 (We need it this way because we are using phone control)
Problem is that this normalized phone does not shown in Lync client, but it perfectly works in old OCS environment.
Thank you!

Hi,
I've replaced my old rule with one that you wrote, and it works as it should (ABServer.exe -testphonenorm
recognize it in the right way). Thank you for this advice!
Then I run update-csaddressbook, removed .db and .idx files from user, re-lunched Lync client..but this number still not shown.
Here are results of Get-CsAddressBookConfiguration
Identity                   : Global
RunTimeOfDay               : 1:30 AM
KeepDuration               : 30
SynchronizePollingInterval : 00:05:00
MaxDeltaFileSizePercentage : 20
UseNormalizationRules      : True
IgnoreGenericRules         : False
EnableFileGeneration       : True
MaxFileShareThreadCount    : 300
EnablePhotoSearch          : True
It looks strange, number can be normalized, but it's not shown for the user.

Lync Status Not Updating in Sharepoint 2010 with IE 11

After migrating a few users to windows 8.1 with IE 11, Office 2013 these users cannot see their or other lync users status indicator in SharePoint. In most paces the indicator doesn't even show up clear (Vs red, yellow green etc.).
On the My site the indicator is clear but if you hover it shows the call, im video call window and status is displayed.
The site is a trusted site so active X controls are running.
What in IE 11 is preventing this from working?

Hi NWCC ,
the Lync 2013 Windows client maintains a local cache of the address book and they can get in a state that causes a variety of issues with the Contact List in the Lync 2013 client. In my experience the Presence
for some contacts shows as Unknown or Offline, however it can also cause some Contacts to go missing from the contact list, and to not display their Presence in Outlook.
The resolution is simple enough – delete the SIP profile directory and restart the client. The SIP profile folder is located here:
%UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
Deleting this SIP profile folder will trigger a complete address book download at a random interval in the next hour from when the client is restarted.
Reference:
http://blog.insidelync.com/2013/09/lync-2013-presence-issues/
http://blogs.technet.com/b/nexthop/archive/2013/09/24/script-to-delete-sip-profile-for-multiple-lync-2013-users.aspx
http://support.microsoft.com/kb/2813701/en-us
Best Regards,
Eric
Eric Tao
TechNet Community Support

Exchange Server 2013 Database not showing in ECP after removal of Exchange Server 2010

I recently complete the migration of my Exchange 2010 server to Exchange 2013. I then proceeded to uninstall the 2010 server using setup.com /m:uninstall. At the end of the process I received an error that it did not complete the uninstall.
I checked the server and Exchanged 2010 was removed. When I checked ECP on 2013 it still showed the old 2010 server listed. I used ADSI edit and manually removed the old sever.
Now when I log into 2013 ECP I only see the one serve but when I go into databases, none are listed. I check under the server itself and it shows the database that it is using but it is not listed under the database tab.
If I do a search under the database tab I can find it and adds it to the list. I can then open and view details.
My issue is, after I log out and then back in, I have to run the search to find the database again. In ideas on how to have it show up in the list like it did before I removed the 2010 Exchange server?
Thank you,

Hi,
From your description, I recommend you verify the following things for troubleshooting:
1. Please make sure that AD replication is completely by checking the user object's homeMDB attribute. This value should contain the DN value of the Exchange Server 2013 mailbox database.
2. Wait 30 minutes for the cache on the Exchange Server 2013 Client Access Server to clear or restart the MSExchangeOWAAppPool on the Exchange Server 2013 Client Access Server.
For more information, here is a kb for your reference.
Exchange 2013 Redirects to Exchange 2010 for OWA and ECP
http://support.microsoft.com/kb/2931385
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Lync 2013 Edge server compatibility with Lyn 2010 Front end Pool

Hi All,
Technet article (http://technet.microsoft.com/en-us/library/jj688121.aspx) says the following:
If your legacy Lync Server 2010 Edge Server is configured to use the same FQDN for the Access Edge service, Web Conferencing Edge service, and the A/V Edge service, the procedures in this section are not supported. If the
legacy Edge services are configured to use the same FQDN, you must first migrate all your users from Lync Server 2010 to Lync Server 2013, then decommission the Lync Server 2010 Edge Server before enabling federation on the Lync Server 2013 Edge Server.
Can you tell me why it is you have to change the External Lync Web services URL during a migration to Lync 2013 from Lync 2010. What purpose does this serve?
Also can you clarify this and explain why this is required, why would you have to migrate all of your users, would a Lync 2013 Edge not talk to a Lync 2010 front-end?
Any help would be much appreciated. MANY THANKS.

Thank you very much for all your inputs.
We still have few questions:
Questions:
Can you tell me if Lync 2010 users will be able to login using mobility if we repoint the reverse proxy (TMG) web services publishing rule to the Lync 2013 server? Remember both systems Lync 2010 and 2013 are using the same web
services URL so they will both end up at the Lync 2013 server. Alternatively if not we will migrate all users to 2013, this is not a problem
In addition to this I cannot find anything that states how Exchange UM will operate when you are running from a backup pool and the exchange UM contacts are not available because they are homed on the server that is down. This
configuration is 2 x standard edition servers pool paired. How can we make sure Exchange voice mail works during a pool failover?
Call Park is not clear to me I read the following:
Lync Server 2013 provides new disaster recovery mechanisms in the form of failover and failback processes. These failover and failback processes support recovery of Call Park functionality by allowing
users who are homed in the primary pool to leverage the Call Park application of the backup pool when an outage occurs in the primary pool. Support for disaster recovery of the Call Park application is enabled as part of the configuration and deployment of
paired Front End pools.
Is this saying we need to deploy Call Park in the DR pool and use a different range of orbit numbers, or can we use the same range in the DR pool?
Further, I can see that Common Area Phones will be fine as they will log into the DR pool automatically. Response Groups need to be exported and imported to the DR pool. Incidentally these did not migrate well at all and have
caused us a big headache!
Any inputs will be greatly appreciated. Thanks again for all of your time.

Powerpivot add-in menu does not show in Excel 2010

To whom it may concern,
Sometimes, excel.exe *32 is left in the windows 7 professional task manager but all excel sheets are closed (sometime VB script opens excel sheet, and then close the excel sheet); then, manually open an excel sheet 2010 with powerpivot add-in,
powerpivot add-in menu does not show in Excel 2010. If excel.exe *32 is deleted from task manager manually, then, open Excel 2010 with power-pivot add-in, the powerpivot add-in menu is always visible. Try to figure out why excel.exe *32 is still left running
in the task manager.
jianmin chen

Ed, I read your reply. I thought about closing it before, but today I still experience the same issue after I reinstall the powerpivot for Excel 2010.
I came cross powerpivot error: unable to load the table in the powerpivot windows when the excel sheet is opened, yesterday it worked fine. After I reinstall powerpivot for Excel 2010, SQL 2008, the issue goes away.
And I tried to use pivot table instead of powerpivot in Excel 2010, and then plan to write stored procedure to build some relationships used to set up in powerpivot windows; so, I am still planning to use excel sheet, instead of writing a windows form application.
Try to get more experience in excel.
jianmin chen

Excel datasheet Password Protection not opening in Sharepoint 2010 default browser

Password protection Excel datasheet not opening in SharePoint 2010 library with Use the server default
(Open in the browser) I get a SharePoint Error ‘an unexpected error has occurred ’
If I change in advanced setting to Open in the client application it works fine
What do I need to do In order to have the file open in the default browser?

Excel Services/Excel Web App does not support password protected Excel sheets. Your only option is to open in Excel client.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Lync 2013 Frequent Contacts not showing in Outlook 2010 on RDS

Running Outlook 2010 along with Lync 2013.
On a Windows 7 PC if I launch Outlook first, then launch Lync. The frequent contacts will appear on the To-Do bar after "refreshing outlook" (minimizing and maximizing or changing folders.
If I do the same thing on a Windows 2008 R2 RDS machine the Frequent contacts never appear. I have to close down Outlook and reopen Outlook for them to appear.
Does anyone have any detail information about how the integration between Outlook and Lync works to bring through these contacts?
Thanks

Hi,
I test the issue on Windows Server 2008 R2 and I found the frequent contacts appeared on the To-Do bar if I opened Outlook 2010 firstly and then opened Lync 2013 client.
So please make sure Outlook 2010 and Lync 2013 client to the latest version and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Lync 2013 client still show titles that is turned off on Lync 2010 server

Hi All
I have another unique issue it seems.
Environment - Lync Server 2010 on CU5. Lync 2010 and Lync 2013 client.
The client has used absconfig and removed the titles as the don't want that to be displayed.
The lync 2010 clients does not show the titles - so that is working.
Lync 2013 from external access the titles does not show - so that is working.
Internally on the LAN the Job Titles shows on the Lync 2013 client - so not working.
What I've tried so far :
Disabled exchange contact sync on a client policy
Used webdownload only for address book.
Using registry to force download of address book.
Deleted the Lync folder on the client computer to make sure when it downloads the .idx and .db file that it is the latest version.
None of the above remediations seems to have any impact on the lync 2013 client.
I have tried to replicate this in my lab (without an exchange server) and the the lycn 2010 and 2013 clients behave as they should be not displaying the job titles.
Having anyone come across this before?
I will be patching the lync 2010 server to the latest CU update, but I think the issue is somewhere else.
Any suggestions will be appreciated.
Regards
Danie

Hi Danie,
I suggest you could install the latest CU update first, because the CU update would fix many problems.
In addition, shall we test Lync 2013 on a fresh computer without Outlook?(You could test this using Lync 2013 Basic).
Best regards,
Eric

Lync 2013 client is showing EWS not deployed.

Hi,
I am facing issue with lync 2013 client in the configuration information. it is showing EWS not deployed .
UCS Connectivity State;      Exchange connection Down;           --;
MAPI Information;              Status OK;MAPI Status OK;
EWS Information;;             EWS not deployed;
I am facing this issue both internally and externally.
I am using Lync 2010 server and exchange 2010.
Lync 2010 client is showing all EWS information correct. No issue with lync 2010 client.
Thanks

Had the same issue. Couple of things you can try:
1. Verify EWS virtual directory is configured properly on your Exchange CAS or Front-End servers (Get-WebServicesVirtualDirectory)
But the thing that fixed it for me was:
2. Create SRV records for (_autodiscover, _TCP, 443) pointing to your CAS or Front-End server/array. This has to be done for the forward zone of your public domain name (i.e. contoso.com, not contoso.local). I did them both just
to be on the safe side, but was the public domain that did it.

SSRS subscriptions in default zone of sharepoint 2013 are not showing in intranet zone and vice versa.

one of the Sharepoint 2013 site collection has alternate access mappings created. Default site is .com and intranet is .local.
So when we add SSRS subscription in .com - they are not showing in .local and vice- versa. How do we fix this so the subscriptions are same in both .com and .local.

Hi spanda,
Per my understanding that you have configured the alternate access mappings which Default site is .com and intranet is .local. But the subscription in one of the site will not list in another mapped site, right?
Actually, if you are on a different Alternate Access Mapping other than the Subscription was created on, we will get no subscriptions, Because we are using the method "Microsoft.ReportServices.SharePoint.UI.ManageSubscriptionPages"
to deal with the logic by creating the value for "m_reportUrl" using the current context of the URL the user is using and passing that to the "SubscriptionListControl". You can find the code in this article if you have some
knowledge of development:
SQL Server Reporting Services ignores Alternate Access Mappings When Checking for Report Subscriptions
I recommand you to submit an feedback at
https://connect.microsoft.com/SQLServer/
If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level of service
provided.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Data Source for Current Task not Showing in SharePoint Designer 2013

Hello,
I am creating a approval workflow in SharePoint Designer 2013. I had completed the workflow only to have the requirement by the client that they wanted to approve the workflow from email. So I thought why not use the Current Task:Form_URN data source field.
But i went to look for it, and it doesnt appear to be in the drop down.
Im on Office 365, and using it for one of my SharePoint Sites. Im new to Office 365. Please help.

Hi ,
According to your description, my understanding is that you want to use Current Task:Form_URN to let users approve the task in email.
When we use SharePoint 2010 platform to create approval workflow with “Start Approval Process” action, in the approval notification email, there is a button called “Open this Task”with Outlook client. If we click the button, it will call the task and we
can approve or reject the task.
I added a log action into my approval workflow to log Current Task:Form_URN, the value of the log message was the edit form of the current task.
If you want to use it in email, you can do as the followings:
Open your approval workflow with SharePoint 2013 Designer (the platform of the workflow sould be SharePoint 2010 platform).
Edit the workflow
In the “Start Approval Process” action, click “Approval (*)”.
Click “Change the behavior of a single task”
In the “When a Task is Pending” section, find the action “Email task notification to
Current Task:Assigned To “, and edit it like the screenshot below.
Publish the workflow
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Lync clients 2013 fails to show video, but 2010 works ok.

We'v migrated from 2010 to 2013 Lync server. But some Lync clients in remote places are still 2010.
And today I'v discovered that in a conference for 50+ participants but only one speaker (audio, video and presentation) for some reasons no one of 2013 client and WebApp could see a speaker video. I'v first restarted a client, then
a device, but no effect. After 30 minutes we have to start without a video, but some users with 2010 clients wrought that they have a video of the speaker.
I'v installed a Lync 2010 to my test PC, and on the same PC, with the same credentials 2010 client video is ok, and 2013 shows only a video placeholder.
I’v created a test conference, and the same situation repeats with only 4 clients.
Any suggestions ?

Hi,
From your description above, did you mean only 4 special Clients have this issue?
If yes, please try to check the OC firmware, delete Lync user profile and Lync information on Registry, then test he issue again. If the issue persists, please check if the Lync 2013 client update to the latest version.
Lync user profile: %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
Lync user information on Registry: HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Lync 2013 - Presence not showing in SharePoint 2010

Similar Messages

Maybe you are looking for