Mac Book Pro and final cut studio 2

Hi,
Bought a MBP last year and am looking to purchase Final Cut Studio 2 Universal. After looking through some discussions I'm still unsure how well this package will run with my setup. Yes it will be fine, or yes it will run but with some limitations, or yes it will run but I should get a different video card, etc.....? A definate yes or no would be appreciated and any limitations or known issues. I will be using a120GB external hard drive for my video footage.
Thanks, Mick
Sorry if this is posted in the wrong area or if these questions have been answered. I'm new to Macs and forums and wouldn't like to spend that much cash on a maybe!
Mac Book Pro 15 Mac OS X (10.4.9) Intel core duo 2.16 GHz 2GB ram/Radeon X1600 256Mb 80GB hard drive

Yes, it will be fine.
The only limitation is Color which needs an external screen with at least 1650x1050 to be kind of useful though it runs at smaller resolutions.

Similar Messages

Retina mac book pro and Final Cut Pro x

retina mac book pro and Final Cut Pro x is crashing when I use any keying filter. It doesn't should color wheels or grey scale sliders and when I click where they should be they crash. Any ideas?

I actually trashed the prefs three times before I reinstalled the whole app. Here is the screen shot. Notice under color selection sub menu no color wheel. Everytime I click in that general area, it crashes.

What is the largest and fastest Hard Drive I can install in a 17" I-7 Mac Book Pro running Final Cut Pro7 7

What is the Largest and Fastest Hard drive that can be installed in my 17" Mac Book Pro i7 duo core 2.8 I need it to be compatible with Final Cut Pro 7

One of these SSDs:
http://eshop.macsales.com/item/OWC/SSDMX6G480/
An SSD is always a faster storage solution. A regular hard drive will almost ALWAYS be the bottleneck in a system, because it's the only part in a computer that has physical, moving parts. The SSD has no moving parts, so there's much less latency when reading and writing. That particular SSD is designed with professionals in mind, meaning that it will right at home rendering video in Final Cut. Hope that helps!

Mac Pro and Final Cut Studio 5.1.2

I've had problems trying to export mpeg files from final cut pro using compressor after having updated all applications to their current versions (FCP 5.1.2, Compressor 2.3, Qmaster 2.3, QT 7.1.3...) including firmware, OS and security updates. Since I was kind of in the middle of a project I ended up reverting back to the original universal crossgrade of Final Cut Studio (FCP 5.1, Compressor 2.1, Qmaster 2.1...) in order to get the desired results of a muxed mpeg. Now, before I go back to trying to resolve this issue of updating the software, I would like to know if anyone is running Final Cut Studio on a Mac Pro with all updates current (5.1.2, 2.3...) and with the ability to export muxed mpeg streams - both audio and video in the same file. Also, I have posted more specific questions regarding these issues in the compressor and FCP forums but decided I needed to hear from some Mac Pro users who have had success with the Final Cut Studio updates. BTW, I have done all the updates of Final Cut Studio (5.1.2, 2.3...) on a G5 quad at work and have had no problems whatsoever. I'd just like to have everything up to date and functional. Other than trying to get this worked out, I have found my Mac Pro to be most excellent. Thanks in advance.

Dave, thanks for your input. It would crash out during the compressor export and the failure reason would say 3x Crash Server Down in the compressor box. I haven't tried an mpeg-1 because all we broadcast are mpeg-2 program streams. Most of the stuff I export is no longer than 10 - 12 minute segments. If you could, try exporting as an mpeg-2 muxed. Some other possible factors - I had captured the original footage on a G5 quad at work, put them on an external drive and then loaded them onto the Mac Pro and imported them into the project. Could there be a difference between DV codecs of the PPC and the Intel processors? Now that I'm at a stopping point I'm planning on trying to do the update again. Just hoping to catch something I might have missed. If I were a total computer illiterate I would say user error, but I'm not.

Mac Book (Black) and Final Cut 5.

I'm about to buy a Black Mac Book and am hearing conflicting reports. Will it run Final Cut 5 HD ?
Mac Book Mac OS X (10.4.8)

i have fcp 5.1 running on my macbook 2.0 with 2 gigs of ram.
i am not sure all of the final cut studio apps will install in the mb, due to the graphics card. i did not try installing anything other than fcp, but it installed fine.
make sure you are running 5.1, as that is the universal version.

MacBook/Macbook Pro and Final Cut Studio

I am about to buy a Mac, but im not sure if I should get the MacBook or MacBook Pro? Which is better suited for Final Cut Studio? Is there a specific version of the MacBook/MacBook Pro that would be best? Thanks so much!

Exactly. It will install, but if you have any problems and you need to call Apple, they won't give you any support. If you're going to spend $1,200 on some software, you should pay for a computer that supports the minimum requirements.
-Doug

The difference between Final Cut Pro and Final Cut Studio 2

I'm looking at buying FCP. Can I buy Final Cut Studio 2 to get FCP or is that only a Upgrade and where would i buy it. How do I go about buying FCP and how much is it

Final Cut Pro v6 is only available as a component within Final Cut Studio 2.
What it is, what is included and how to purchase it is spelled out here:
http://store.apple.com/us/product/MA886Z/A?mco=MTIxODk3Mw
x

MacBook Pro and Final Cut Studio 2

Hello, all. I currently have Final Cut Studio 1 (with Final Cut Pro 5, DVD Studio Pro 4, Motion 2, LiveType 2, Soundtrack Pro, and Compressor 2). I have an old PowerMac G4 from 2003, which Motion doesn't work on (and DVD Studio Pro doesn't run so great on, either - I haven't worked with Soundtrack Pro, LiveType, or Compressor too much). I'm thinking about buying a new MacBook Pro, and I'm wondering if all of FCS 1 (and especially Motion) would work on either the 13" or 15" models.
If I got a 13", here would be the specs:
2.53GHz Intel Core 2 Duo
8GB 1066MHz DDR3 SDRAM - 2x4GB
250GB Serial ATA Drive @ 5400 rpm
SuperDrive 8x (DVD±R DL/DVD±RW/CD-RW)
NVIDIA GeForce 9400M graphics
If I got a 15", here would be the specs:
3.06GHz Intel Core 2 Duo
8GB 1066MHz DDR3 SDRAM - 2x4GB
500GB Serial ATA Drive @ 7200 rpm
SuperDrive 8x (DVD±R DL/DVD±RW/CD-RW)
NVIDIA GeForce 9400M + 9600M GT with 512MB
Anyone have any experience with running an older version of FCS - or even FCS 1 - on a setup like the ones I described above?
Thanks, everyone,
Kevin

Short answer: 13", no, 15", yes

MacBook Pro and Final Cut Studio

I'm trying to put together a mobile editing system. From what I've researched regarding the type of camera I'll be using, a MBP and FCS seems to be my best bet. I've primarily been a PC guy. However, I'm let down by the additional peripherals and high cost of editing programs on the PC, so I thought I'd dabble in Macs for a bit.
I've had a chance to work with FCP before, but I'm worried about picking up a MBP that is too slow. Also, Color's requirements include a 17" monitor. However, I'd probably already be so far into post-production by that point that I'd use the MBP with a larger Mac monitor instead.
Am I on the right track here? I'd love to hear some input and experiences!
Thanks in advance!

Well, there's no such thing as 1050p60. You need to simply use the easy setup that matches the format of the material on the tape. It's most likely 1080i60. If shot in the US... if not post back.
The Easy Setups are found in the Final Cut Pro Menu... Just select the format of the tape (it will show on the on screen on the camera's LCD during playback. You may have to turn this feature on on the camera/deck if it's not already displaying the playback format.
The easy setups will also set your sequence settings correctly... If you have to render a clip when you just put it in a sequence, it's because your sequence settings don't match the format of the video being placed in it. The Easy setup for HDV 1080i60 will make things great as long as that is the format of the source material. Which I'll bet that's what it is. (it's the most common of the formats).
Why do you have to capture the audio separately? Was it recorded on an audio tape or something? If so you'll have to sync it in a sequence like it was an audio ciip... then if you want it to be the same as an audio/video clip, you need to use the "merge clip" command, after you've established the sync for each clip. A pretty tedious process I'm afraid. Read about "merged clips" in the online manual.
Jerry
P.S. It's pretty bad form to "threadjack"... don't do it next time. Start your own thread...

Advice before buying Macbook Pro and Final Cut Studio

Hey there
I'm looking for advice before I buy my first Mac.
Currently editing SD video using Windows PC, Quad core, and Sony Vegas Movie Studio.
Now I want to edit HD (from Canon5Dii) and plan a move to Macbook Pro & FCStudio.
What hardware configurations of MBP (with FCS) have folk out there got, and how well do they run?
Eg. Do I need the 8GB memory?
Any peripherals I MUST have
Thanks in advance
Aye
Message was edited by: sam4rufus

Any peripherals I MUST have
Fast, external hard drives for media storage. Don't use the internal system drive for this. Don't even consider using USB drives at all.
All MBPs limit you to FireWire 800 drives, which are OK for lower bandwidth video like HDV and AVCHD.
Although the 17" model also has an ExpressCard slot that can be used with an eSATA adapter to connect much faster drives that provide throughput that FireWire cannot achieve.

Hello- I have final cut pro X and final cut studio. Should Compressor 3.5.3 work with fcpX. Whne I try to export to it aI am told I must go to i-apps and buy compressor.

Hello- I have final cut pro X and final cut studio. Should Compressor 3.5.3 work with fcpX. When I try to export to it aI am told I must go to i-apps and buy compressor.

No, FCP X will only work with Compressor 4.

Final Cut Studio and Final Cut Studio 2

At work, we have a Mac Pro running Final Cut Studio (original) and recently acquired a G5 and would like to purchase Studio 2 for it. Are Studio 2 projects compatible in any way with Final Cut Studio? Are there any compatibility packs for this?

FCP projects are not backwards compatible so a project created in FCP 6 will not work on FCP 5.
The workaround is using [XML exports|http://developer.apple.com/appleapplications/fcpxml.html].
G.

Black Magic Intensity Pro Card & Final Cut Studio

I'm in the process of purchasing a Mac Pro to use for my New Wedding Video Business. I have purchsed the New Sony HVR-HD1000. I'm looking to get everything at one time and something has me very confused. I hope that someone can please help me.
As I understand it. I take my New Sony HD Cam via Firewire800 and Final Cut Studio will just suck it all in.
If thats the case, What is the need for products such as the "Black Magic Intensity Pro Card"?
Do I need it when my Mac Pro/Final Cut will import my footage anyways?
Please help me make a sound decision.
Thank you for your time.

No disrespect taken. I might not be very technical but some times I wonder if I'm doing the right thing.
Maybe some history will help explain my situation.
I have a old cheap-o hand held Sony SD Mini DV Cam that I used all year to puts around with. As a test of my skills went to weddings and events for fun. All of these events had "Professional Videographers" I was just here for fun with my little camera.
For fun I would turn in my little DVD and the response was incredible. Even though my footage sucked compared to all the "Pro Cameras" being used it was my skills in editing, having fun with the video, and using lots of Motion graphics and titles. I became so popular that people wanted me to actually film events as a paid rig!
With no training what so ever and just tinkering with Final Cut Studio - I have a long list of "word of mouth" gigs with people waiting for me to film for them.
My parents then decided to give me a few gifts. (1) Sony HVR-HD 1000 and (2) JVY GY100HD Cameras. I now have all the gear I need. I never owned cameras like this before so as I started looking into getting a Mac Pro - All these questions came to mind.
My point is - I used a POS camera and consumers ate it all up. I didnt worry about "Color Space" or ProRess anything. I just imported as DV - edit the footage - have fun with it - burn it on DVD and call it a day.
I'm just seriously asking - now that I have nice cameras that didnt cost me a dime - cant I just continue the same way I have been with my POS camera?
Is anything more than just Firewire800 to my Mac really that critical for Weddings on SD DVD's?

I have the newest version of the mac book pro and i recently bought iLife 11 because i needed idvd but when i installed iLife my iphoto no longer works and will not let me open. How do i fix this

I have the newest version of the mac book pro and i recently bought iLife 11 because i needed idvd but when i installed iLife my iphoto no longer works and will not let me open. How do i fix this

Welcome to Apple Support Communities
iTunes in Mac OS X Tiger is outdated. Open  > Software Update to install the latest iTunes version for Tiger.
If you need iTunes 10.7 or a newer version, you have to upgrade to Mac OS X Snow Leopard. First, check that your Mac is supported > http://support.apple.com/kb/sp575 If it is, buy Snow Leopard > http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After buying Snow Leopard, make a backup of your data, insert the DVD and upgrade to Snow Leopard. After upgrading, open  > Software Update, and install the latest Snow Leopard version. Finally, run Software Update again to install iTunes 11.0.4. If you want to install iTunes 10.7 instead, download it from the Apple website > http://support.apple.com/kb/dl1576

Canon HV20, 24p pull-down and Final Cut Studio 2

Has anyone successfully done a 24p pull-down using this camera on a Mac? Specifically in Final Cut Studio 2? If so, is it a built-in pull down or is it a workaround.
The HV20 doesn't have pull-down flags ad causes some issues. There is a workaround but it's cumbersome and annoying to say the least. I'm HOPING FCS2 alleviated this.

I don't think FCS2 has any support for your HV20 that I can see, Cinema Tools is where you will need to do a reverse telecine. I have read other posts here from people who have tried it, do a search and read up. I believ the HV20 shoots 24p and records to tape as 60i. If in fact it does I can't really think of a good reason to remove pull down unless you are going to film. HDV files are extremely small and even if you did remove the pull down for say a DVD, the DVD player is going to add it back on playback anyway. The look will be the same. 24p with pull down is 24p.
Good Luck
Z1&V1user

Mac Book Pro and final cut studio 2

Similar Messages

Maybe you are looking for