Timeout and Result Code 302 from Tuxedo

My WebLogic server has threads with Jolt connections timeout after ten minutes. The transactions get a result code 302 (Found. Temporarily moved) back from Tuxedo.
Why might I receive this result code? Why are the connections timing out?
Thanks,
D

Hi,
Where are you seeing this "result code"? Typically if you get an error, an exception will be thrown. Is an exception being thrown and if so, what exception?
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Similar Messages

  • Case created without business partner, reason code and  result code

    In our CRM system, some cases was created without business partner, reason code and result code.
    We created some customer functions to make these fields as mandatory, it always work for our technique people and process expert, but it didn't work for some users occasionally. We cannot debug it.  
    Can anyone tell me why and how to solve it?
    Please help me !
    Regards,
    Shirley

    Hello Shirley,
    Well, then I would check the code, which calls your custom function modules.
    It may be possible, that you have an IF in the 'Main' program, which makes it possible to skip the custom FM for these users.
    The reason I am assuming this, is that normally you need just to change attributes for a field to make it mandatory, or customizing like SHD0 makes this possible. If you use custom FM, you have to call them somewhere and this is the point I would be looking for.
    Check the traces for the users and you should find, that the custom FM are not called for them.
    My opinion, of course
    Award points if this helps.
    Regards,
    Martin Kuma

  • HTTP code 302 from Vodafone IT

    Hi guys,
    I have few measuring devices with TC65 over the Europe. All devices connects to one servers few times per day. Everything worked fine, but month ago Italy units (with SIM cards Vodafone IT) started to fail. Sometimes they can't connect and HttpConnection gives Http Response Code 302 (site moved temporarily...). It happens in 90% attempts of connection. But only with Vodafone IT. Other units with Vodafone D2, Vodafone CZ, Bouyg Telecom, NL KPN Mobile and others still work fine.
    Http header 'Location' contains URI http://iao.vodafone.it:80/checkpref.php?orgUrl=http... and there is message: we are sorry, but the page you requested is not existing...).
    Don't you have any idea what does it mean?
    David
    Edited by: david.hofr on Sep 25, 2008 6:56 AM
    Edited by: david.hofr on Sep 25, 2008 6:59 AM

    What APN do you use? I just changed 'web.omnitel.it' to 'internet' and it looks better.

  • Oracle DRM Batch script with outputs and result codes

    Hi ,
    Any one can help me in adding Email notifications to DRM Batch scripts if action script or export failed.
    DRM Version is 11.1.2.1
    Thanks,
    Aswartha

    Hi Aswartha,
    There is no command within the DRM batch client to send emails. You will need to use a third party tool which can be called from the batch file to send emails. Below are the error codes details that you can use,
    Error Level Value Description
    0 Success
    1 Unknown error
    2 Batch operation completed but generated warnings
    3 Batch operation did not complete due to error
    100 Error communicating to or returned from the Oracle Hyperion Data Relationship Management Server
    200 Error occurred during initialization of the Batch Client
    210 An invalid parameter value was passed
    220 Invalid URL
    230 Invalid user name or password
    Thanks,
    Prasad

  • From which table i will get PO tax amont and tax code name.

    HI all
    I"m giving date to develop one Z report.Where i will get the PO tax amonut(not condition amount).i need total TAX amount and TAX code..from where i can get these two??
    plz help me
    thanks
    ramesh reddy

    Hi
    for excise check table J_1IEXCHDR for header
    J_1IEXCDTL for item excise
    The Table name used to find the Tax Values are
    KOMV: Pricing Communications-Condition Record
    KONV: Conditions (Transaction Data)
    From the above tables you can refer the fields below.
    KAWRT
    KBETR
    Fetch the corresponding records based on the field
    KNTYP
    Search net you will get many threads on this

  • Error while running converted JCL / proc from Tuxedo Workbench

    Hi , I am trying to convert and run a JCL / Proc and Cobol code through Oracle Tuxedo  Rehosting Workbench . I followed all the steps and deployed the components .
    This created .ksh components for JCL in ../deploy/JCL and  .proc component in /deploy/PROC.  But when iam running the Jobs its giving below error  and its not able to find the converted proc.
    Do I need to set any Environment variable so that its able to find the location of converted proc.
    ERROR    mi_ScriptExtend: The procedure called is not found
             EJR: Internal Error (mi_ScriptExtend "/root/workspace/Pravin7/deploy/BATCH_RT/../JCL/RU55RU55.ksh" "/root/workspace/Pravin7/00000001/EXEC/00000001.ksh") RC=123

    Hi:
    The error can be caused by the PROCLIB environment variable not being defined.
    There is a Tuxedo ART Workbench 12c fix (I think RP002) which does this in the BATCH_RT/setenv script.
    PROCLIB is set to the the directory for JCL Libs, procedures, and includes.
    Also the SYSIN environment variable should be set to the ${APPDIR}/Master-SYSIN
    Here is the doc link for the environment variables:
    Using Batch Runtime
    Regards,
    Bob Finan

  • Let me know what is new table and transaction code in ECC6?

    Hi
    As the above title, I want to know what is new table and transaction code, through from R/3 4.6c to ECC6.
    Regards
    Sang lim.

    Hi Sang lim,
    Apart from the tocdes listed above,
    Transactions that changed from Release 4.6 C
    Rel.  Old TCode  New TCode 
    46C  ME51  ME51N 
    46C  ME52  ME52N 
    46C  ME53  ME53N 
    470  FNBD  FNBT 
    470  ME54  ME54N 
    470  ME59  ME59N 
    46A  MR01  MIRO 
    46A  MR02  MRBR 
    46A  MR08  MR8M 
    46A  MR1G  MIRO 
    46A  MRHG  MIRO 
    46A  MRHR  MIRO 
    46A  MRRS  MRRL 
    46B  S_P99_41000327  S_ALR_87100205 
    46C  MR03  MIR4 
    46C  MR1B  MIR6 
    46C  MR2M  MIR4 
    46C  MR3M  MIR4 
    46C  MR41  MIR7 
    46C  MR42  MIR4 
    46C  MR43  MIR4 
    46C  MR44  MIR4 
    46C  MR5M  MIR4 
    46C  OAA2  AUFW 
    620  AFAB  AFABN 
    620  AL01  RZ20 
    620  AL02  RZ20 
    620  AL03  RZ20 
    620  AR11  AR11N 
    620  AR29  AR29N 
    620  ASKB  ASKBN 
    620  CA97  CA97N 
    620  DB02  DB02N 
    620  FM3S  FMCIA 
    620  FM3U  FMCIA 
    620  FMN3  FMN3N 
    620  FMN4  FMN4N 
    620  FMN5  FMN5N 
    620  O02E  BMBC 
    620  OACR  OAC0 
    620  RZ23  RZ23N 
    620  SCOM  SCOT 
    620  SM22  SM21 
    620  SWID  SWI2_DIAG 
    620  S_P9C_18000190  S_PL0_09000447 
    620  S_P9C_18000247  S_P6B_12000136 
    620  VOPA  VOPAN 
    620  VOTX  VOTXN 
    620  WE49  WE42 
    620  WE52  WE41 
    620  WE53  WE41 
    640  ABAW  ABAWN 
    640  AL04  RZ20 
    640  AL19  OS07 
    640  COHVOMAVAILCHECK  COMAC 
    640  COHVOMPI  COHVPI 
    640  COHVOMPP  COHV 
    640  KE1F  KE1FN 
    640  KE29  KE29N 
    640  MKH1  MKH1N 
    640  MKH2  MKH2N 
    640  RZ02  RZ20 
    640  RZ06  RZ20 
    640  RZ08  RZ20 
    640  STAT  STAD 
    640  STMP  SLPP 
    640  VL22  VL22N 
    700  AL05  RZ20 
    700  AL16  RZ20 
    700  AL17  OS07 
    700  OVXA  OVXAN 
    700  OVXG  OVXGN 
    700  OVXJ  OVXJN 
    700  OVXK  OVXKN 
    700  OVXM  OVXMN 
    700  OVX3  OVX3N 
    700  OVX6  OVX6N 
    700  OVX8  OVX8N 
    700  WLAM  WLAMN 
    700  WLMM  WLMMN 
    700  WLMV  WLMVN 
    700  WLWB  WLWBN 
    700  WPLG  WPLGN 
    Regards,
    Kiran

  • Copy Material Codes, Costs, and Cost Code Distribution

    Has any one come up with way to copy material codes with their unit prices and cost code distributions from one project(or template) to another? When a user has a large inventory of material codes, it would be helpful to be able to copy, or import these to a new project.
    Thanks for any help.

    Forgot to mention that CMPlus will copy Materials from one project to another with the unit pricing of the current project HOWEVER, the cost distribution is tied to the contract that the material is associated with. If you are using materials with Daily Reports to track material not related to a contract then this will be all you need. IF you are using Materials in association with line items on a contract/PO then it will populate the selection list but you will need to perform more data entry to properly link to the contract.
    By performing this copy from one project to the other the capability to "Generate" materials from a contract or PO is no longer functional because the Material already exists as far a Contract Manager is concerned
    One more item to think about - materials can only be associated with one contract - that does not mean that a material can not be used on more than one contract.
    I am assuming that since you are asking this question that you have been using materials on your projects and understand the nuances and issues with the way CM handles Materials.

  • The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

    I am having problems  saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
    The document could not be saved. The server said:
    “The operation failed because an unexpected error occurred. (Result code 0×80020005)”
    Please ensure you have completed all required properties with the correct information and try again.
    I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
    Adobe Acrobat version 10.1.13
    SharePoint 2010

    Hi quodd,,
    We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
    1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
    2. How are you opening and saving the PDF, the exact workflow?
         Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
    3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
    4. Please verify that columns name do not contain spaces or some other special characters.
       Can you try to save PDF to library with Custom template and just a single managed metadata column  with a simple name
    Thanks,
    Nikhil Gupta

  • Result Code = -43 when cutting and pasting

    If anyone can help with this, I would be completely thankful.
    I cut a clip to paste it into a new project, so I could edit it by itself. Because of the way Garageband is designed, I had to close (and save) the first project before I could open a new one. When I went to paste the clip, I got a pop up box with the follow:
    "An error occurred.
    Result code = -43
    File = Male Voice#07.aif"
    I tried opening Audacity and pasting it in there, but there's not an option in any other program but Garageband. If I hit "OK" through the error, it pastes a completely blank clip of the same length, but silent.
    Is there any way to recover this clip, or has my Mac completely ruined my project on what should be a simple operation? I don't have time to rerecord this.
    Thanks!

    Oh my, I'm afraid you messed it up. Error code -43 means "file not found". Here's what I think happened:
    • You cut the region out of your original project. The Mac's clipboard now holds a GB region pointing to the audio file - not the audio file itself!
    • You close the original project, probably it prompts you whether you want to save it. If you click "yes", the project is saved, and since it doesn't contain the region you cut out, at this stage the audio file is deleted because it's not being used in the project (that's the way GB handles audio - otherwise the project size would grow indefinitely with all the unused audio takes).
    • Now you create a new project and paste in the region from the clipboard. But as I said, this region only has a reference to the audio file, it doesn't contain the audio itself - it can't find the deleted file, that's why you get the error message.
    If this is what happened, I'm afraid your audio is gone for good. Here's some tips how to avoid that in the future:
    • If the only purpose is editing one track, why transfer it to a new project at all? You can mute the other tracks and edit away.
    • To avoid deleting the original audio, always use the "copy" command, not "cut"!
    • If you successfully transferred an audio region to a new project, immediately use the "Save as Archive" command - that way the audio will be saved in the new project too. Otherwise it only references the old project which you might delete at some time, and then you'd be in the same position.
    Sorry, but I think the only option is to re-record!

  • How to do selective delete of the GL a/c, BA and Co Code from the BWrequest

    Hi,
    How to do selective delete of the GL a/c, BA and Co Code from the BW request ??
    Regards,
    Vivek

    Cube or DSO?
    Cube - manage - notedown the req number - selective deletion - enter req number at REQ ID and give the selection parameters as you need(GL a/c, BA and Co Code ) and execute.
    For DSo you can't do selective deletion on request id basis

  • "Error Result code = -43" AND "Audio file not found"

    In Garageband I was trying to  click Join, but kept getting "Error Result code = -43"
    What does this mean?
    Also, I thought saving the file and restarting Garageband would help, but upon re-opening the program BIG problem: the file (just this one, others are opening fine) has this error message upon opening "Audio file “07 I See the Light.aif” not found!"

    mcgregorsgal wrote:
    so do I have to basically start over?
    for that one recording, it looks like it.
    the error -43 is a system level error, so i HIGHLY doubt this will help, however you can ctrl-click the project file, choose Show Package Contents, open the media folder and preview any audio files in there to see if the missing file is there, but in all likelihood, you will need to re-record it

  • I have got 2 iPad Air one of it is not logging me in because I have forgotten the pass code and have logged out from iCloud by accident. Can you please help me to use my iPad.

    HI
    I have 2 IPads, I am unable to use one of it because I have forgotten my pass code and also logged out from iCloud accidentially. Can you please help me to solve this problem.
    Cheers
    Raveena

    Follow the instructions on this page : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • I have just purchased a new iMac and have uninstalled cs6 from my old iMac. Do I just install CS6 as normal or do I need a new code. My licence is for one user

    I have just purchased a new iMac and have uninstalled cs6 from my old iMac. Do I just install CS6 as normal or do I need a new code. My licence is for one user

    Yes, just install as you normally would using the serial number you originally used.
    You did not have to uninstall on the old machine - with your single user license you are allowed to have two activated installations.  So feel free to reinstall it if those are the only two machine you plan to have it on and you'd like to have a backup installation.

  • Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?

    Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?

    Hi connally25,
    Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
    http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
    If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
    Facebook Follow Widget not working
    Regards
    Sonam

Maybe you are looking for