Macbook Pro 15" 2.5 Ghz upgrade kits question
Hi i've been reading about the possibilites of upgrading my Macbook Pro to 8GB. But i have been reading conflicting reports.
I bought my Macbook Pro in March 2009. It is widely agreed that a macbook pro bought before the June revisions can only be upgraded to 6GB unofficially.
YET on the apple website for upgrading memory on pre June revisions my 2.53ghz Macbook Pro is not listed http://store.apple.com/uk/memoryfamily/MEMBP_ALG1
BUT on the current post June revision memory upgrade page my 2.53ghz macbook pro IS listed and is available to upgrade to 8GB.
http://store.apple.com/uk/memoryfamily/ME_MBP
So my question is wether my March 09 bought Macbook Pro 2.53ghz is able to upgrade to 8GB?
This makes sense, because where on earth are you going to find two 3GB chips--they should be installed in identical pairs--and 4GB pairs was recommended to me by Crucial with the caveat that only 6GB would be addressable.
Ideally you would use identical pairs, but if your use of the MBP can benefit from 6GB of RAM instead of 4GB, the benefits of the extra RAM will far outweigh the tiny speed penalty from using unmatched modules. So there's nothing wrong with using a 2GB and a 4GB module together while you wait for the release of Snow Leopard and confirmation from other users that your machine can use 8GB when running SL. I don't believe that will prove to be true, but I know there's all kinds of speculation and purported reasoning out there to that effect. The only sensible way to approach it is to wait and see. Someone will certainly try it the moment they're able to, and the results will undoubtedly appear here and everywhere else. If you want more RAM in the meantime, buy a single 4GB module.
Similar Messages
-
I have a Mid 2009 15 inch MacBook Pro with 2.53 GHz Intel Core 2 Duo and 4 GB 1067 MHz DDR3. Can this MacBook be upgraded to 8GB? If so, what type would you recomended
Awesome! Thank you What about the Corsair brand?
http://www.amazon.com/Corsair-DDR3-Laptop-Memory-CMSO8GX3M2A1333C9/dp/B002YUF8ZG /ref=cm_cr_pr_product_top -
Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?
thanksYes. You should be fine with Snow Leopard, but Lion requires a minimum of 2 GBs of RAM. If you upgrade to Lion I would first upgrade your RAM to at least 4 GBs if your model supports it. Also, see:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s). -
MacBook Pro 17" 2.16 Ghz - Ongoing Shut Down / Freezing Problems
After searching around the web for quite awhile and reading through as much as I can on here, I've finally run out of options and so thought I would post my experience / problem on here and see if anyone knows how to fix my problem.
My gear:
OS 10.6.7
MacBook Pro 17" 2.16 Ghz
Model Name: MacBook Pro
Model Identifier: MacBookPro1,2
Processor Name: Intel Core Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP12.0061.B03
SMC Version (system): 1.5f10
Video:
Chipset Model: ATY,RadeonX1600
RAM - 2 x 1Gb Chips
FUJITSU MHY2120BH:
Capacity: 120.03 GB (120,034,123,776 bytes)
Model: FUJITSU MHY2120BH
Revision: 0081000D
Serial Number: K439*****H4A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Hard Disk:
Capacity: 119.69 GB (119,690,149,888 bytes)
Available: 98.97 GB (98,967,773,184 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Problem:
Over the last few months I've had constant problems with freezing, shut downs. This might be in the form of I'll be working in iMovie editing some video and then mouse down into the corner to switch Spaces, the screen will half zoom out then just hang. Mouse won't respond, everything just sits there. I usually have to fix this by holding down the power button until the MBP turns off, then just reboot.
Other times I'll leave the computer on at night, wake up in the morning and it will either be off and as such, I just have to press the power button and it boots up again. Or the screen will be off, metal above the Function keys will be cooking, but the computer isn't responding, just a blank screen. I hold down the power button until it turns off and then reboot again.
These problems were getting worse. It has gotten to the stage where it might freeze a couple of times a day.
Seems the problem only occurs when the MBP is working. I might leave it rendering at night and wake in the morning to find it off etc.
Will also sometimes get horizontial lines in apps. I shut them down and start them up again and it's fine. But it's like the graphics card is struggling big time.
Actions to Fix:
- Started with repairing the permissions, but I always found that it had lots of items to repair, would repair then, but then if I verified again, the same things would come up as needing to be repaired. I also tried booting from the OS X DVD and repairing from that version of Disk Utility, but same result.
- Created new admin user account, to see if problem was just limited to my account. Same problem.
- Ran AHT from the MBP DVD that came with the MBP and it passed the hardware test. Though I couldn't find anywhere to make it run an extended test. The test I could run would only take about 10 minutes I believe.
- Erased the HD and fresh install of 10.6.3 from DVD, then software updates to 10.6.7 (yesterday). Repaired permissions after each step. After the OS upgrade I got a decent list of items that needed to be repaired, and after repair, would still show as needing repair. I checked the KB and it listed a lot of files that might get this error, but that it was ok to ignore them.
- Was editing video this morning in iMovie again, running Disk Utility on an external drive and boom, the MBP locked up again
I've gone through the /logs/crashlog in both the root and home user folders. After nearly all crashes these are empty, so it's not even reporting it anywhere.
Can anyone shed any light on whhat might be causing the problem?
<Serial Number Edited by Host>Actually, when I was at the Apple Store I had both laptops flat, with the screens at 90 degrees. Pushing the screen forward and back with my fingers (via the top of the screen of course), the 15" easily has twice the hinge resistance. With that kind of test, weight isn't a significant factor -- that 17" hinge on a 15" laptop would probably cause the screen to come crashing down, too.
There were a few people in these forums who said their 17" was actually too tight (wish I had that problem!). It seems like a quality/consistency problem that could easily be fixed by A) measuring the force required to move the screen back and forth before screwing the case together, and B) making the hinge tension adjustable. -
What is a recommended decompression software for a non-Lion compatible MacBook Pro 1,1 2 GHz Intel Core Duo running OS X Version 10.6.8?
My thanks to you and all other respondents. In backing up "theVault" App I thought that my ancient version of Stuffit was inadequate to unzip the backup file. I attempted to download the latest Zipit version which only works with Lion. After upgrading to Stuffit 9 I realized that theVault backup file was encrypted so as to not open on the backup Mac. One must restore to the iPhone where is does open.
My apologies for the imprecise post. I am finding limitations with not being able to install Lion on my early MacBook Pro. I can recommend theVault to those looking for a password App with secure backup. -
MacBook Pro i5 2.4 Ghz versus MacBook Pro Core 2 Duo 3.06 Ghz???
Re: MacBook Pro i5 2.4 Ghz vs. MacBook Pro Core 2 Duo 3.06 Ghz
Hello,
I am new to CS5 / Photoshop (& Apple!) and am looking forward to diving in. However I am about to purchase either a used MacBook Pro Core 2 Duo 3.06 Ghz or the MacBook Pro i5 2.4 Ghz. Can anyone provide me with information as performance differences I may see between the 2 processors using CS5 for photo/video editing? I appreciate any insight!
The MacBook Pro Core 2 Duo 3.06 Ghz has been upgraded to 8GB of RAM, has the no glare screen, and a 750GB Hardrive. The new i5 I would buy is the lower end model. Less RAM and smaller HD, however they are obviously upgradeable in the future. It also would not have the no glare screen.
My biggest question is around performance of the the CPUs on Photoshop, etc ...??? That being said, there is a $300 difference and is the new machine worth it in performance???
Appreciate your help!georgecoll wrote:
Re: MacBook Pro i5 2.4 Ghz vs. MacBook Pro Core 2 Duo 3.06 Ghz
Hello,
I am new to CS5 / Photoshop (& Apple!) and am looking forward to diving in. However I am about to purchase either a used MacBook Pro Core 2 Duo 3.06 Ghz or the MacBook Pro i5 2.4 Ghz. Can anyone provide me with information as performance differences I may see between the 2 processors using CS5 for photo/video editing? I appreciate any insight!
The MacBook Pro Core 2 Duo 3.06 Ghz has been upgraded to 8GB of RAM, has the no glare screen, and a 750GB Hardrive. The new i5 I would buy is the lower end model. Less RAM and smaller HD, however they are obviously upgradeable in the future. It also would not have the no glare screen.
My biggest question is around performance of the the CPUs on Photoshop, etc ...??? That being said, there is a $300 difference and is the new machine worth it in performance???
Appreciate your help!
If you're going to do serious Photoshopping, then more ram is better. But, without knowing the price differences, I'll be honest, go for the i5 version, it'll work better for you. It'll cost you about $120 to upgrade the RAM to 8GB (go to any reputable online dealer or Amazon). It'll cost you about $110 to upgrade to 1TB internal HDD. Both upgrade are user friendly and do not harm the warranty of the new MBP.
So, for $230 in upgrades, you'll have similar specs as the used one, but a much faster performing processor. Unless the Core 2 Duo is MUCH cheaper, I'd buy new, then immediately upgrade. I have the i7 processor, I did the upgrades, and whenever I turn on the Core 2 Duo, it feels like I'm using an abacus. OK, not that bad, but the difference on video encoding and photoshop/Aperture is huge. -
MacBook Pro i5 2.5 GHz/8GB RAM With Retina
Hi eveyone,
As many of you already did, today I've upgraded my MacBook Pro i5 2.5 GHz/8GB RAM from Mountain Lion (10.8.5) to Mavericks (10.9).
Unfortunately, I'm experiencing serious and unpleasant issues since I installed the upgrade.
Specifically, my monitor flickers almost every time I scroll an application window (e.g., Safari, Chrom or internet, either using an USB mouse or the trackpad.
Moreover, when I pass the mouse over the Dock, this starts vibrating from time to time.
After several reboots and given that one of the new features of Mavericks is the new management of external monitors, I've tried to re-install from scratch the OS X upgradewithout connecting my laptop to the external LCD but still nothing has changed.
I'm really annoyed by having both monitors flickering. Another particular thing is that if I try to click on the Finder menu appearing on the external monitor, this makes flicker the primary monitor approximately at the same coordinates (i.e., at the Finder menu of the laptop monitor).
It seems like something is going wrong with the video card drivers but this is just my conjecture.
Are you guys experiencing the same or is there anything you might want to suggest to solve these issues?
Thank you in advance
ANY HELP THERE ,IT IS REALLY DISAPONTEING THAT THIS IS HAPPENING WITH APPLE PRODUCTS HELP PLEASE
THANKS
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9)do you solve this problem?Because ı am living same problem.
-
MacBook Pro 15" 2.5 GHz Vs 2.8 GH
how different is between MacBook Pro 15" 2.5 GHz than 2.8 GHz? Is it be worth to wait and have special order for 2.8 GHz?
IF this is the only point of comparison (2.5GHz vs 2.8GHz on the current 15" MBP) you will probably never notice a difference between the two ... unless you are into hardcore video editing, Photoshop or gaming. Even then, a) you will be hard pressed to notice a difference without instruments to measure it and b) there are many other factors that can affect system performance way more than this trivial difference in CPU speed on a top-of-the-line Mac laptop.
If you have the $200 it would take to upgrade to the 2.8GHz CPU, I suggest a better investment would be to apply the money to upgrading to the 1TB Flash Storage or use it to get a good external hard drive to use for backup. -
NVidia on Macbook Pro Retina 2.0 GHz
Hey everyone,
I recently bought a Macbook Pro Retina 2.0 GHz which I thought would be sufficient for almost anything. After all the processor would tune up to 3.2 GHz if needed.
Now I wanted to try something heavy on the graphics and I wondered why the Macbook handled it so problemeticaly. It seems that the 2.0 GHz variant does not have the nvidia graphics chip. Can anyone confirm that?
If I had known this prior to buying it then I would have spent a few more bucks to get the 2.3 GHz variant!
Is there any way to get the additional nvidia chip? Is there any way to get my machine to Apple and have it upgraded? If this is true and I am not mistaken about not having the nvidia then I am so mad... Why didn't they made this more clear? Why was there no warning, saying: Yes, you can buy the 2.0 GHz variant but you will miss [number of things]".Mmmh, I think I got it now... My Macbook is already upgraded on certain points (like ssd or ram). So the difference to the model with the nvidia card is 100$. But, and here is the problem, I didn't see the difference in the text between the two models on http://store.apple.com/us/buy-mac/macbook-pro. As far as I can see this is the only place where I am informed that I am missing the nvidia card when I'm choosing the left model. And as far as I can see I would have missed the nvidia card if I picked the left model and then upgraded to the specs of the right model, too.
Honestly, I can't figure out what Apple is doing there. Why can't they just tell me: Hey, you CAN choose that model but you will miss this and this and that.
So, if I am understanding you correctly: There is no way for me to get that nvidia card, apart from buying a completely new macbook? -
Bought a Macbook pro 2009 2.8 ghz used, how do I make the most? (it was not formatted)
bought a Macbook pro 2009 2.8 ghz used, how do I make the most? (it was not formatted)
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It is not safe to use a computer with software installed by a previous owner.
1a. If you don't own another Mac
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
1b. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
2. Partition and install OS X
If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In thePartition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
3. Other issues
If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
Is a Macbook Pro early 2011 2 GHz Intel Core i7 compatible with a SATA III SSD
Is a Macbook Pro early 2011 2 GHz Intel Core i7 compatible with a SATA III SSD Drive
lwrosenbaum wrote:
Is a Macbook Pro early 2011 2 GHz Intel Core i7 compatible with a SATA III SSD Drive
One thing to keep in mind is that while you'll be amazed at the increase in performance an SSD can deliver over a HD, the two storage mediums work differently, and one of the OS features SSD's benefit from is TRIM. While you've probably seen a lot of discussion and disagreement about that on these forums, this article about the Samsung 840 EVO SSD also goes into how SSD performance changes over time for a variety of SSD's. The narrative is interesting but the graphs are an eye-opener, showing how relatively successful Garbage Collection alone vs GC + TRIM are in recovering full performance. That's the good news.
The bad news is that while activating TRIM is simple, activating it with Yosemite installed has a real down-side. So if you haven't upgraded to Yosemite yet, you might keep that in mind. -
Macbook pro wont sleep after ram upgrade
Hi,
I have a 17" Macbook pro late 2011. I upgraded the ram from 8gb to 16gb last week and now I having trouble with sleep. When the laptop goes to sleep it always to seems to go into hibernation mode. When I open the lid I can only wake the computer by holding the power button for around 7 secs and then it does a restore from the HD. I've tried a PRAM + SMC reset. Also tested the ram and everything seems good. Below is the output from pm set, the console after hibernation restore (filtered for the word 'sleep') and the memtest. Any help would be appreciated.
-- PMSET
MacBook-Pro:nlc phil$ pmset -g
Active Profiles:
Battery Power -1
AC Power -1*
Currently in use:
standbydelay 4200
standby 0
womp 1
halfdim 1
hibernatefile /var/vm/sleepimage
gpuswitch 2
sms 1
networkoversleep 0
disksleep 10
sleep 37
hibernatemode 3
ttyskeepawake 1
displaysleep 3
acwake 0
lidwake 1
--- console
1/05/2015 9:49:34.852 am GoogleSoftwareUpdateAgent[11054]: 2015-05-01 09:49:34.163 GoogleSoftwareUpdateAgent[11054/0xa0c2f1d4] [lvl=2] -[KSAgentApp setupLoggerOutput] Agent settings: <KSAgentSettings:0x5098d0 bundleID=com.google.Keystone.Agent lastCheck=2015-04-30 04:24:22 +0000 checkInterval=18000.000000 uiDisplayInterval=604800.000000 sleepInterval=1800.000000 jitterInterval=900 maxRunInterval=0.000000 isConsoleUser=1 ticketStorePath=/Users/phil/Library/Google/GoogleSoftwareUpdate/TicketStore/Key stone.ticketstore runMode=3 daemonUpdateEngineBrokerServiceName=com.google.Keystone.Daemon.UpdateEngine daemonAdministrationServiceName=com.google.Keystone.Daemon.Administration logEverything=0 logBufferSize=2048 alwaysPromptForUpdates=0 productIDToUpdate=(null) lastUIDisplayed=(null) lastCheck=2015-04-30 04:24:22 +0000 alwaysShowStatusItem=0 updateCheckTag=(null) printResults=NO userInitiated=NO>
1/05/2015 10:39:44.654 am Timings[736]: AppTracking stopped due to sleep or shut down
1/05/2015 10:42:46.000 am kernel[0]: ACPI: sleep states S3 S4 S5
1/05/2015 10:42:49.323 am discoveryd[73]: Basic SleepProxy BSP Server Disabled. Metric = 3373
1/05/2015 10:42:49.344 am discoveryd[73]: Basic SleepProxy Could not get the primary interface
1/05/2015 10:42:49.353 am discoveryd[73]: Basic SleepProxy Sleep Proxy Server is not enabled
1/05/2015 10:42:54.725 am discoveryd[73]: Basic SleepProxy Could not get the primary interface
1/05/2015 3:38:01.187 pm GoogleSoftwareUpdateAgent[5941]: 2015-05-01 15:36:40.022 GoogleSoftwareUpdateAgent[5941/0xa0c2f1d4] [lvl=2] -[KSAgentApp setupLoggerOutput] Agent settings: <KSAgentSettings:0x319240 bundleID=com.google.Keystone.Agent lastCheck=2015-04-30 23:49:37 +0000 checkInterval=18000.000000 uiDisplayInterval=604800.000000 sleepInterval=1800.000000 jitterInterval=900 maxRunInterval=0.000000 isConsoleUser=1 ticketStorePath=/Users/phil/Library/Google/GoogleSoftwareUpdate/TicketStore/Key stone.ticketstore runMode=3 daemonUpdateEngineBrokerServiceName=com.google.Keystone.Daemon.UpdateEngine daemonAdministrationServiceName=com.google.Keystone.Daemon.Administration logEverything=0 logBufferSize=2048 alwaysPromptForUpdates=0 productIDToUpdate=(null) lastUIDisplayed=(null) lastCheck=2015-04-30 23:49:37 +0000 alwaysShowStatusItem=0 updateCheckTag=(null) printResults=NO userInitiated=NO>
1/05/2015 4:59:19.731 pm Timings[3645]: AppTracking stopped due to sleep or shut down
1/05/2015 5:03:39.164 pm coreaudiod[242]: 2015-05-01 05:03:39.163645 PM [AirPlay] Power: SystemWillSleep
1/05/2015 5:03:55.473 pm discoveryd[73]: Basic BTMMServer Sleep offload failed. Start deregistering
1/05/2015 5:03:58.000 pm kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
1/05/2015 5:04:00.000 pm kernel[0]: hibernate image path: /var/vm/sleepimage
1/05/2015 5:04:01.000 pm kernel[0]: Opened file /var/vm/sleepimage, size 8589934592, partition base 0x0, maxio 2000000 ssd 1
2/05/2015 6:37:59.000 am kernel[0]: Previous sleep cause: -60
2/05/2015 6:38:00.118 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Reordering authw 0x7fc7a2c78d80(2000) (lock state: 3)
2/05/2015 6:38:00.168 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: err 0x0
2/05/2015 6:40:58.537 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/05/2015 7:01:11.312 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/05/2015 7:09:06.117 am GoogleSoftwareUpdateAgent[8440]: 2015-05-02 07:09:04.977 GoogleSoftwareUpdateAgent[8440/0xa0c2f1d4] [lvl=2] -[KSAgentApp setupLoggerOutput] Agent settings: <KSAgentSettings:0x545fe0 bundleID=com.google.Keystone.Agent lastCheck=2015-05-01 05:38:03 +0000 checkInterval=18000.000000 uiDisplayInterval=604800.000000 sleepInterval=1800.000000 jitterInterval=900 maxRunInterval=0.000000 isConsoleUser=1 ticketStorePath=/Users/phil/Library/Google/GoogleSoftwareUpdate/TicketStore/Key stone.ticketstore runMode=3 daemonUpdateEngineBrokerServiceName=com.google.Keystone.Daemon.UpdateEngine daemonAdministrationServiceName=com.google.Keystone.Daemon.Administration logEverything=0 logBufferSize=2048 alwaysPromptForUpdates=0 productIDToUpdate=(null) lastUIDisplayed=(null) lastCheck=2015-05-01 05:38:03 +0000 alwaysShowStatusItem=0 updateCheckTag=(null) printResults=NO userInitiated=NO>
2/05/2015 7:19:11.035 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/05/2015 7:35:18.701 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/05/2015 7:37:35.421 am coreaudiod[242]: 2015-05-02 07:37:35.420950 AM [AirPlay] Power: SystemWillSleep
2/05/2015 7:37:57.995 am discoveryd[73]: Basic BTMMServer Sleep offload failed. Start deregistering
2/05/2015 7:38:01.000 am kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
2/05/2015 7:38:03.000 am kernel[0]: hibernate image path: /var/vm/sleepimage
2/05/2015 7:38:03.000 am kernel[0]: Opened file /var/vm/sleepimage, size 8589934592, partition base 0x0, maxio 2000000 ssd 1
2/05/2015 7:38:28.000 am kernel[0]: sleep
2/05/2015 7:38:33.000 am kernel[0]: Previous sleep cause: 5
2/05/2015 7:38:33.393 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: NULL shield_window (lock state: 1)
2/05/2015 7:38:56.292 am coreaudiod[242]: 2015-05-02 07:38:56.291574 AM [AirPlay] Power: SystemWillSleep
2/05/2015 7:38:57.288 am discoveryd[73]: Basic BTMMServer Sleep offload failed. Start deregistering
2/05/2015 7:39:00.000 am kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
2/05/2015 7:39:02.000 am kernel[0]: hibernate image path: /var/vm/sleepimage
2/05/2015 7:39:02.000 am kernel[0]: Opened file /var/vm/sleepimage, size 8589934592, partition base 0x0, maxio 2000000 ssd 1
2/05/2015 8:16:54.000 am kernel[0]: Previous sleep cause: 5
2/05/2015 8:16:54.588 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Reordering authw 0x7fc7a2cc74b0(2000) (lock state: 3)
2/05/2015 8:16:54.589 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: err 0x0
MEMTEST
Mac OS X 10.10.3 (14D136) running in multiuser mode
Memory Page Size: 4096
System has 8 Intel core(s) with SSE
Requested memory: 10327MB (10829672448 bytes)
Available memory: 10327MB (10829672448 bytes)
Allocated memory: 10327MB (10829672448 bytes) at local address 0x0000000101000000
Attempting memory lock... locked successfully
Partitioning memory into 2 comparison buffers...
Buffer A: 5163MB (5414836224 bytes) starts at local address 0x0000000101000000
Buffer B: 5163MB (5414836224 bytes) starts at local address 0x0000000243bfd800
Running 1 test sequence... (CTRL-C to quit)
Test sequence 1 of 1:
Running tests on full 10327MB region...
Stuck Address : ok
Linear PRN : ok
Running comparison tests using 5163MB buffers...
Random Value : ok
Compare XOR : ok
Compare SUB : ok
Compare MUL : ok
Compare DIV : ok
Compare OR : ok
Compare AND : ok
Sequential Increment: ok
Solid Bits : ok
Block Sequential : ok
Checkerboard : ok
Bit Spread : ok
Bit Flip : ok
Walking Ones : ok
Walking Zeroes : ok
All tests passed! Execution time: 3076 seconds.Hi fatlinesofcode,
First of all, check out Apples article on the issue: OS X Yosemite: If your Mac won’t go to or stay in sleep If you find these steps don't help, try a few of the following
A common cause for the Mac not sleeping is your printer. If there are queued jobs waiting to be printed, but your printer is switched off, for some reason you Mac just wont like it and simply will not go to sleep. System Preferences > Print and Scan > Open Print Queue
Do you have an Ethernet Cable connected? People have reported in the past that removing their Ethernet allowed their Mac to sleep. This goes for other things you may have connected directly to your Mac also.
Try heading into your Mac Preferences > Sharing and deselecting 'Internet Sharing' as well as 'Printer Sharing'.
Also deselect Wake For Network Access by heading to System Preferences > Energy Saver > Power Adapter > Wake For Network Access.
Energy Saver > Schedule > Startup or Wake - Uncheck.
Alternatively, set your system preferences to Never Sleep, and put into Sleep manually: System Preferences > Energy Saver > Computer Sleep > Never.
Good luck! -
Which Intel CPU is used for MacBook Pro 13" 2.26 GHz
Hello,
I want to buy the above-mentioned MacBook Pro, however, I don't know which CPU model is used (P7550 or P8400), since I need the CPU feature "IVT" (Intel® Virtualization Technology) which is only available in P8400.
In some German discussions I got the information that both CPU models have been sold in Germany (checked with the tool CPU-X)
The MacBook Pro with 2.53 GHz (P8700) has also the IVT feature.
Does anybody know which CPU model is currently used in the MacBook 13" (MMB990*/A)?
Thanks for your feedback.
MichaelHello Rod,
Today I was in the apple store in munich and checked some mbp 13" 2,26 GHz systems. All had the 8400 inside. I shortly spoke with a saleman, however, he didn't know about different models inside the systems and told me, that I can't test the system locally, but I can check it @home and if i'm not happy with the system I could bring it back within 14 days.
My result from the mbp:
machdep.cpu.brand_string: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz
machdep.cpu.features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON DSCPL VMX SMX EST TM2 SSSE3 CX16 TPR PDCM SSE4.1
I compared it with your results and the only difference I found was an additional feature "SMX" (Safer Mode Extensions). I couldn't find out for what exactly this is used, but I seems independ of the IVT.
I believe that you are right, and the VMX corresponds to the "IVT" feature. If this is true, I could take any MBP 13"
What do you mean?
Thx
Michael -
I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower. Has anyone had similar problems? I have Feb 2011 Macbook pro 13" 2.3 Ghz.
As Shootist pointed out, the system uses more power.
However, initially it will reindex the hard drive for spotlight, which will slow things down temporarily.
It also must rebuild caches that eventually will speed things up.
If it has completed indexing the hard drive (no dot pulsing in the spyglass), then there might be something wrong.
Start by booting into the Recovery HD (a partition created with Lion that has Disk Utility and reinstallation options) by holding down cmd-r when you restart. You can let go when the gray screen appears.
When it boots, select Disk Utility and Repair the drive.
If that doesn't speed things up, try re-installing the OS from the same Recovery HD. It won't delete any of your files, but it has helped some people whose Macs ran slow after installing Lion.
Also, how much memory do you have? Lion needs RAM so maxing your Mac out might also help. -
Ist mein MacBook Pro, 15", 2,53 GHz, Mitte 2009, mit der CS6 kompatibel? Welche Probleme gibt es dabei?
Du bist wahrscheinlich mit dem Problem, dass so viele von uns mit 2011 Maschinen werden mit - ein Defekt im Löten von der GPU, die erste wird allgemeine Ursache Bildschirm Probleme und schließlich zu einer unbrauchbar Maschine führen. Leider ist Apple die Anerkennung des Mangels und die einzige Angebot, das sie liefern den Nutzern ist eine Hauptplatine ausgetauscht werden - die bis $ 700 + USD aufrufen können.
Einige Leute, die lange vorbei sind, werden mit Garantie neue GPU eingebaut. Dieser Prozess ist sehr viel billiger als eine neue Hauptplatine und scheint eine dauerhafte Lösung für den Mangel an.
Um dieses Problem stoßen mehr lesen, siehe -> https://discussions.apple.com/thread/4766577?tstart=0.
Viel Glück,
Clinton
PS: Dies wurde "übersetzt" vom Englischen ins Deutsche mit Google Translate - mich nicht für alles, was lächerlich klingen mag schuld!
Maybe you are looking for
-
Unable to print and scan from new wireless hp printer to Macbook Air
I have just purchased a wireless HP Deskjet 2540( compatible with MAC) and I am not able to print or scan anything on my Macbook Air,even after trying with the USB connection.I have installed and uninstalled the printer 3 times but still not working
-
jute way pc locked up after iTunes update. It says client Mac address 001320 be ad 25 . PXE E53 No boot file name received pXE MOF. Exiting Broadcom PXE. ROM . How do I unlock my pc?
-
AD Replication Not Working - Last error: 1256 (0x4e8):
Hi, We have one DC and ADC which is running on the same premises. Few days back the ADC got power failure and after that long it thrown an error of some services are not started. We checked the event viewer to find out the service failed but not fo
-
Hi Gurus, I have been trying to find more information regarding the WITH CLAUSE, but most of the info I find is related to Forums. Do you know where i could find Oracle specific documentation on this? I really like using that clause, but i have notic
-
User Access to Oracle Business Rules Webdav Repository
Hi All I've done the following steps for to create Webdav repository;After that i have tried to connect Ruleauthor using Webdav repository but got the "Repository not exist" error message. 1. Create wallet with password "welcome1" saved to specific l