Macbook Pro OSX 10.5.8 Intel problems
I tried to sync my iphone 3 to my macbook pro and sync with iTunes 10.3.1, update pictures with iPhoto 7.1.5.
Got errors - iphoto had recovered photos a few times but wouldn't sync all photos and it is buggy. Tried to run software update to update safari and itunes and software update shuts down.
Now Mail is trying to set up like it is brand new and I can't open my email. iphoto started up with a welcome type screen for iphoto 08. What caused this to happen?
What should I try next? Update the OSX? Not ready to move to Lion as I need to upgrade my macbook pro first. Just trying to get everything updated and working correctly. I thought software update would keep the OS updated as well.
Hi g,
Software Update will update, but will not upgrade the OS. To upgrade the OS to Snow Leopard 10.6.8 you need to purchase the disc for $29 and install it, then run Software Updates.
I have no idea if this will resolve your issues.
Do you have at least 15% free space on your HD?
Similar Messages
-
13'' Macbook pro, OSX 10.8.2, wifi problems
Dear all,
I have a 13'' macbook pro from november 2012 with osx 10.8.2 and I have wifi connection problems at my place.
I installed "network strengh" and I discovered that I have a low connection in my appartment. I have to be stick to my internet box to reach 70% of connection quality. In my living room, I have no more than 25% with is not enough to have a good connection (per example, a lot of disconnection on skype...).
I have a friend who has an older macbook and he has 60% of connection quality in my living room.
I tried all the channels on my box
I also downloaded the
Mac Wi-Fi Update 1.0
and my mac doesn't even want to launch it, it says that the software is not supported by my system...
Does anyone of you had the same problem or have any idea about how I could fix this problem?
Thanks in advance.
JeanHow are you connecting to the Internet wirelessly? Is it directly from a router or is it via Apple's Airport Express products? If from a router wirelessly, check the router settings to reset to your MBPro. If from any Airport products, then reset the product with your MBPro.
-
my Macbook Pro (OSX 10.6.7 2.26 GHz Intel Core 2 Duo) has started misbehaving on me. When I'm working, the cursor will start spontaneously moving to the in a straight line, and randomly right clicking on things.
If I close the computer and open it back up, it sometimes stops for a little while, then will spontaneously start again. Any help would be truly appreciated. Thanks!See this knowledge base article. Also, you might want to update to 10.6.8 (don't know that that will fix your problem, but it's the latest version of Snow Leopard).
Clinton -
How do I update my macbook pro with 2.33 GHz Intel Core 2 Duo processors from OSX 10.5.8 to 10.7?
Firefox 16.0.2 was the last to work on the old Mac OSX 10.5.x as Firefox 17.0 to current has required OSX 10.6+
https://www.mozilla.org/en-US/firefox/16.0/system-requirements/
https://www.mozilla.org/en-US/firefox/17.0/system-requirements/ -
Apple MacBook Pro 15" Laptop MA681LL/A Intel Core Duo 2.16GHz 1GB 100GB OSX 10.4
https://discussions.apple.com/thread/2177539
-
MacBook Pro OSX 10.6 drops Wi-Fi connection when idle/asleep.
My MacBook Pro OSX 10.6 has begun to lose Wi-Fi connection when idle. I can't re-connect unless I shut down computer and re-start. Worse, the system appears to lock up--I can't force quit, must press the power button to shut down. This problem occurs wherever I am using my laptop, not just with one particular Wi-Fi network.
I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this? -
Macbook pro osx v 10.9.5 will not recognize or play netflix dvds
My macbook pro osx 10.9.5 2.4 GHZ Intel Core i5 will not longer play any netflix dads. I have even tried 2 separate external stand alone drives hooked up to my mbp via usb and 4 different movies and one will play in any source and the discs are in brand new condition. I insert the disc into the mbp drive and you hear it trying to read the dvd about 3 times, failing, then spits it out. Over and over I have tried.
What is very strange is dvd movies that I personally own will play fine no problem.
This is the first time that I tried to watch a netflix dvd in my mbp since I did an update and I do not remember when that update was done.
Do you think there is some sort of protection on the netflix dvds that could be causing this? or maybe this osx version is faulty and not able to play or recognize rental dvds?
any ideas would be much appreciated.Have you used DVDs that have different region codes? It may be that your DVD drive is locked for a region code different from what Netflix is programmed for.
Ciao. -
After Yosemite Update, Macbook Pro Frustratingly slow, along with many problems after
My Info:
Macbook Pro (2012)
2.4 GHz Intel Core i5
OS X 10.10.3 (14D136)
Memory: 4 GB 1333 MHz DDR3
186.54 GB free of 498.88 GB
Until the last OS X Update (Yosemite), I have had no problems with my almost three year old MacPro.
However, after the last update, I have so many problems with my mac, I just feel like throwing
it out the window.
Unfortunately, I did not have a backup prior to the update, but I backed up my photos and files, then proceeded
to follow apple's instructions (apple support chat) to erase the HD and re-install yosemite from online. Then, I backed up my files and photos from my external drive. (I used TIME MACHINE)
Fine in theory, but:
1. my iphoto library was somehow lost, nowhere to ever be found again
2. I suddenly have issues with my trackpad--the "double click" or "right" click refuses to work, I cannot drag and drop.
3. I have java runtime error messages even upon startup, without internet connection, even though I have already deleted anything and everything java related.
4. My safari is completely useless. Freezes even when only using one tab, must force quit every second.
5. My computer decides by itself when to zoom in and out of a page.
6. My apps are completely slow, I most always need to force quit them
7. My trash has many issues-- If putting a file in the trash, it says "moving file to trash" for hours on end without ever completing the action, also, if I try emptying the trash, it's the same story.
8. Settings. If I try to change a setting, it says "authenticating" for ever and ever without ever authenticating, and I am unable to change any settings.
I have talked to apple many times but have not yet reached a solution.
I have no other resolution at the moment, as I am in Taiwan for another month (My Chinese is limited and there are few, if none authentic Apple stores around)
I have one more month on my warranty so I can *possibly* take it in to a store when I return home, but I first wanted to ask here and see if anyone else stumbled upon the same issues, or if they had solutions.
Thank you!1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in safe mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My 2011 Macbook Pro OSX 10.8.4 latest update won't connect to secured Wi-fi
2011 Macbook Pro
OSX 10.8.4 latest updates
Suddenly stopped connecting to any wireless network which is secured, WEP/WPA/WPA2/personal/enterprise all do NOT work.
Connects to unsecured networks just fine.
For example, our wireless password is:
123456890!
I tried with WPA2, no luck.
Tried with WPA2 and pw 1234567890, no luck.
Tried with WPA and pw 1234567890!, no luck.
Tried with WPA and pw 1234567890, no luck.
Tried WEP with 1234567890, no luck.
Tried with NO SECURITY on this wi-fi network, connected right away.
-I did reset PRAM, no luck.
-I deleted from Keychain, no luck.
-I added as prefered network and removed, no luck.
-I added new network location, no luck.
-I removed the Wi-fi network adapter, rebooted, activated, no luck.
-In the mac console logs, all I see are "wlEvent: en1 en1 link DOWN" when I try to connect to my secured wireless network (home or my office or even at a neighbors).
-Wireless diagnostics tell me nothing
-Console logs do not tell me anything
-Warranty is expired and no AppleCare
Seems like a bug to me, even though I have tried with a Netgear, Cisco/Linksys, D-Link router and even tried tethering to a Samsung Galaxy Note 2 and iPhone 5, all same problem, says "Connection failed."
APPLE FRIENDS HELP ME PLEASE!For example, our wireless password is: 123456890!
Well a password that weak will get cracked in about 6 hours on just about any PC in the area.
Now: LKUY*&T&67NH(*JKÎM<PijriuÎÓyhm8t, that's a real good network password, even a huge botnet would have trouble cracking that. I know because my router was PING flooded by the Flashback botnet and survived.
After OS X is reinstalled over itself to fix it, you might have to do more as it could be a "in user account" issue with a corrupted preference file, bad users permissions or another cause that's not OS X
..Step by Step to fix your Mac -
My iSight is not working on my Macbook Pro. What are the possible problems and solutions?
My iSight is not working on my Macbook Pro. What are the possible problems and solutions?
Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Hi!
Didn't know exactly where to direct this question in the Apple Community so I chose Airport. To everyone, thanks in advance.
I’m really desperate. I’m a big Apple fan. I have two Apple MacBook Pro laptops with Mountain Lion software. I also have an Apple Airport Extreme. My HP Photosmart C4780 printer was also purchased from Apple. Anyway, my Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
This appears to be an HP printer problem. I went to HP community support with the information below but I have received no solutions outside of buying a new printer.
“Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0.”
To be straightforward, I’m no computer tech so I don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve tried everything to reconfigure without success. If I need to make these changes via Airport Extreme Utility 6.0 not easy to find not that I know what I’m doing.
Most importantly if I ever get wireless working again, do I still need Airport Extreme connection or is the AT&T U-Verse modem/router sufficient?
Any direction or help is greatly appreciated. Thank you for listening.Thank you for your prompt response. I'll be honest I'm a retiree and a newbie to all of this stuff. I don't even know how to do a thread. (Embarassing) This is my first ever contact with the Apple Community so I'm slowly trying to figure this out as well.
As to your thread request, I'm assuming you want to read my post with HP. Not knowing how to thread, I've copied it below.
I have an Apple MacBook Pro laptop with Mountain Lion software. I also have an Apple Airport Extreme. My Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0
To be honest, don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve read your forum and tried everything to reconfigure without success. Any direction or help is greatly appreciated.
Thanks in advance!
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
I finally figured it out! (Sorry that I'm replying to my own posts btw, but I want to post the solution for anybody else with the SigmaplusEOL1 problem). If you have the SigmaplusEOL1 as your SSID when you print the "Wireless Network Test Report", you do NOT need to return it (I know that's hassle for people). To fix the problem, follow these steps.
1) Unplug your printer.
2) Go to your router's IP address (like 192.168.1.1 or whatever it is for your router).
3) Change the SSID of your wirelss network to "SigmaplusEOL1".
4) For the Security option for your wireless network select none (so that a password is not required to access your wireless network).
5) Power your printer back on and reprint "Wireless Network Test Repor". It should say "No problem found..."
6) The report should also have a the IP Address of the printer (under Configuration Summary at the bottom). Type that IP Address in your browser to get to the printer's settings page.
7) Click the "Network" Tab at the top.
8) Under the "Connections" header in the left pane, click "Wireless (802.11).
9) Click "Start Wizard" at the bottom right.
10) In the wizard, change the SSID and encryption (wep or wpsk) password to whatever you want your wireless network to be. So probably whatever it started out as before you changed the SSID to SigmaplusEOL1
11) Click "Finish" at the end. The page will probably try to keep loading but it won't because you changed the network settings of the printer. Just ignore that
12) Go back to your router's IP address and change the SSID and encryption password to whatever you changed the printer's SSID and password to.
13). Reprint the Wireless Network Test Report. It should say the SSID is the same as your wireless, and everything is good.
That's it. You should be good to go now.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Thank you for your prompt response. This has been a totally frustrating experience. I’ve spent at least 8 hours trying to fix this. My HP problems and your initial steps were identical to mine. I am by no means a tech person and my computer tech knowledge is minimal. However I followed your steps to the best of my ability.
I did get the SigmaplusEOL1 message. I was able to get to Step 6 where the wireless network test report now reads – “HP printer settings do not match your wireless router settings.” So I guess this is a step in the right direction. However unfortunately the Configuration summary message for the IP Address reads – “Not Applicable”. (Note: changing SigmaplusEOL1 to network name knocked out my Internet access. Had to switch back to regular network name to regain access.)
I’m at a loss as to what to do next. Without the IP Address is it possible to move forward? As I stated earlier, I’m not a tech person. As to your steps 7, 8 and 9, I can’t find them on my computer or maybe I’m looking in the wrong places. In System Preferences - Network, I have none of these steps. If you’re referring to Airport Utility, with the changes in Mountain Lion, these steps are no longer there. If you’re talking about Safari, Firefox or HP, now I’m really lost.
Finally, I don’t know if you can answer this or not. If I ever get wireless working, do I still need Airport Extreme or is the AT&T U-Verse modem/router sufficient?
Again thank you for your time and patience.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Unfortunately I am unable to offer any further advice as I only followed the instructions listed on the other page.
Finally, as to having WEP enabled, I don't know. Don't even know where to look. The best that I could determine is that my security is WPA/WPA2 Personal.
I'm truly sorry about all of this. Thank you for your time and patience. After reading all of this and you change your mind, I would understand. -
HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS
No need to type in all caps - we HEAR you!
I would take a look at the internal drives offered by both Crucial (click the link "Internal Hard Drives Now Available") and OWC. I would stay away from Western Digital drives as they seem to have problems on a number of Mac models.
You can also shop for RAM at Crucial and OWC - just select the System Scanner tab at the Crucial website to find out which memory is right for your machine.
Good luck,
Clinton -
Does MACBOOK PRO OSX 10.9.3 work with Lightroom 4 ?
That link doesn't show that Lightroom 4 works with OSX 10.9.3 as Mavericks didn't exist at the time. Lightroom 4 does work with Mavericks but I think the only problem is the sliders DO NOT have colors so it makes it less apparent what the sliders do. See here.
Sliders are white, blue, look different | Mac OS X 10.9, 10.10 -
Hello,
I have a Macbook Pro 17'', 2.4 GHz Intel Core i7 (late 2011). I dont know what happened but the screen shows red flickering pixels everywhere where it should be black, and light blue pixels where it should be gray, I had this problem twice, the first time it just disappeared by itself. Now it's been like this for days, I have really no clue.
Anyone with the same problem or solution?
This is how it looks like:
ThanxIs that a camera picture or a screen-shot? Is there any difference? i.e., can you capture the problems in a screen shot, or not?
-
MacBook Pro - OSX 10.9.4 - trying to open document in pages. Message says can't open with this version - go to app store for update, but there aren't any updates.
Hope apple can fix this soon if new patch 10.9.4 cause this.
Apple cannot fix problems they did not create. Eset and Avast are capable of doing nothing beneficial and can only cause problems. Uninstall it and determine if the problems subside.
Use Avast's uninstaller, which will remove it completely. Eset requires using the uninstaller included with its downloaded installation program (see screenshot):
Eset will also require manual techniques to uninstall components its uninstaller leaves behind, a common characteristic of poorly written software.
I am now can access an internet, with zero security.
It's a common misconception that you have "zero security" without junk such as Eset or Avast. OS X already includes robust protections against viruses and malware. Use your Mac the way it was intended to be used - without burdening it with useless garbage.
Maybe you are looking for
-
Problem in Creation of Oracle Session in Global.asa
Dear all, I tried to run an ASP example on OO4O and created the following global.asa. <OBJECT RUNAT=Server SCOPE=Application ID=OraSession PROGID="OracleInProcServer.XOraSession"></OBJECT> <SCRIPT LANGUAGE=VBScript RUNAT=Server> Sub Application_OnSta
-
when i use app store in my iphone 4s and try to download or update third party software i got message unknown error. cancel-retry please assit
-
Combining 4:3 and 16:9 footage
Hi! I have various footage that I want to put on a standard DVD. The aspect ratio of some of this footage is 4:3 and some of it is in 16:9. What would be the best way to get them all in 1 DVD without distorting any of it. Thanks. RV
-
Closing or Cancelling a document using DTW or another add-on
Is there any way to close or cancel a document without manually going into the GUI. We have numerous scenarios where an order has committed product that needs to be released by closing the order and could easily do this via SQL or a DTW file generate
-
Drop down list in selection screen.
hello there, How to get a drop down list box in selection screen and in module pools. explain also, how to populate some data into that.