Machine lockup when using World Community Grid software

I have a T60p with 3 GB of memory. I have all the latest BIOS and Thinkvantage updates.
I run the World Community Grid software (http://www.worldcommunitygrid.org/) which uses my laptop for "worthwhile" scientific computing activities while the laptop is otherwise unused. This software has a setting to limit the CPU usage of this software. When I permit the World Community Grid to use 90% of the CPU of the laptop, I get occasional machine lockups, meaning that the machine suddenly stops responding to the keyboard and mouse. The problem does not happen when I set the software to use 50% of the CPU capacity.
I suspect that this has to do with machine overheating. The air coming out of the vents gets noticeably warm when running this software. I am careful to keep the machine in a well-ventilated and airconditioned office-type environment.
I complained about this on one of the World Community Grid forums (https://secure.worldcommunitygrid.org/forums/wcg/viewthread?thread=18443) , and another user indicated that he/she has the same problem.
So my question: shouldn't the system BIOS prevent the machine from overheating? I would think that a lockup like this indicates a bug.

Hi Rodney,
Firstly, thank you for your time replying to my question.
After looking around for this problem, I do think there is a bug in the new firewall that comes with Leopard, the so called Application Firewall (http://support.apple.com/kb/HT1810?viewlocale=en_US). With the old ipfw I had not problem whatsoever, but this new one is giving my a headache...
After reading this
http://gp.darkproductions.com/2007/11/summary-of-leopard-firewall-issues.html
I guess I will fuss around with the ipfw using a GUI such as WaterRoof (http://www.hanynet.com/waterroof/).
But getting back to the explanations, my situation was exactly where you still are: using one machine with Leopard and the other with Tiger, things were fine. But after upgrading the laptop to Leopard too, the iMac and the MBPro do not talk to each other anymore. Unless, of course, I set both machines' firewall to "Allow All Incoming Connections" -- which is less than desirable, right?
If one machine is with its firewall set to anything different than "Allow All Incoming Connections", than the other cannot see it. Neither through Finder, neither through Go | Connect to server..., nothing.
When I access the firewall's log, I see that the other machine is trying to connect, but all the incoming traffic gets blocked and the message is always the same:
*Jun 30 21:13:56 xxx Firewall[71]: Deny AppleFileServer connecting from 192.168.1.xxx:53850 uid = 0 proto=6*
Here is another thread in the forum that shows more people suffering from the same problem:
http://discussions.apple.com/thread.jspa?threadID=1464407&start=0&tstart=0
In the meantime, I will have to be transferring my files using an USB drive... :/
Thanks,
BZdM

Similar Messages

Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Cluster

Hi,
Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Hyper-V Cluster with CSV's? Can't find a clear answer somewhere.
Thanx for helping me out.
DJITS.

Configure CSV backups
If you are running Hyper-V on Windows Server 2008 R2 and you’re backing up multiple clusters with DPM, you need to ensure that only one backup uses the same CSV at any one time. To do this, follow the instructions in
Serialize virtual machine backups.
If you’re using software VSS with Hyper-V on Windows Server 2008 R2, do the following
Serialize virtual machine backups per node
Serialize virtual machine backups per CSV LUN
Have a nice day !!!

Receiving Error 550 when using Exchange via another software application.

Here's a good one (and I hope I'm able to explain this correctly)....
I work at a hospital where we have a gym facility that is open to employees and also to the public. We use a client management system called Twin Oaks. This Twin Oaks software has email functionality that uses an Exchange user account to send
group emails out to clients (this avoids the front desk staffers from having to create email distro groups in Outlook to send out mass emails).
I worked with the Twin Oaks support staff to get the email integration set up with our Exchange server (it was an easy process, entering the SMTP server name then a few other basic settings).
Emailing through the Twin Oaks software works, but only to clients who have INTERNAL hospital email addresses. The messages are failing to go out to any client that has an external email address (Error 550 states the address is unavailable).
Twin Oaks' response to this is that we have some type of firewall that is preventing the delivery of these emails to external addresses. This is not the case and I can't seem to find any reason that would prevent the mails from going out. We
can email external addresses direct from the generic account we set up for this purpose, but for some reason, the mails are not going when they are sent through Twin Oaks application.
We are using Exchange Server 2010. I can't find any transport settings or policies that would prevent emails from going to external addresses and am stumped as to why this isn't working.
Has anyone else experienced these types of issues when using Exchange through another software application to send messages?
Any responses would be greatly appreciated!

Hi,
Based on the description, you could send email to external addresses without the Twin Oaks software. However, with the Twin Oaks software, you couldn't send successfully.
For this issue, I recommend you enable message tracking and check whether you could retrieve message tracking log entires when you send emails to external addresses through the Twin Oaks software.
If you couldn't retrieve message these tracking log entires when you send emails to external addresses through the Twin Oaks software, it means that the Exchange server is OK and the crux of the problem is the Twin Oaks software.
Here is an article about message tracking log for your reference.
Get-MessageTrackingLog
http://technet.microsoft.com/en-us/library/aa997573(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

CTI faild to login when using IP Communicator (Softphone)

hi all,
CTI V7.0 faild to login when using IP Communicator (Softphone 0.2.0.6) and get CTR Warning Error:
IPCC Error [12005]login could not be performed...(see attached)
Anyone with any ideas?
Greetings,
Zak

Hope your resolved by now if not some ideas.
try configuring and connecting your device first.
When IP phone is all set with ACD service then try again.
Goodluck.
Baseer.

Popup instead of list when using WD4A ALV Grid Drop Down By Key

I am develop a WD4A application and I am using an ALV grid. I have set the cell editor for one column wiht the following code:
CREATE OBJECT lr_ddbk
    EXPORTING
      SELECTED_KEY_FIELDNAME = 'ZCURRENCY'.
Data: lv_key_visable TYPE abap_bool,
        lv_key_visible_fieldname TYPE string.
   lr_ddbk->set_type( if_salv_wd_c_uie_drdn_by_index=>type_key_value ).
* lv_key_visable = lr_ddbk->GET_KEY_VISIBLE( ).
* lv_key_visible_fieldname = lr_ddbk->GET_KEY_VISIBLE_FIELDNAME( ).
* lr_ddbk->SET_KEY_VISIBLE( abap_false ).
lr_alv_column->SET_CELL_EDITOR( lr_ddbk ).
This code works fine. I then fill the drop down with the following code:
*...Build the currency drop down list
DATA lv_default_currency TYPE wdr_context_attr_value.
DATA lv_currency_count TYPE STRING.
DATA ls_tcurt TYPE tcurt.
CLEAR ls_contextvalue_set.
CLEAR lt_contextvalue_set. REFRESH lt_contextvalue_set.
CLEAR lv_default_currency.
loop at it_ac_attr into ls_ac_attr.
    if ls_ac_attr-attr_id eq 'CUR'.
      select single * from tcurt into ls_tcurt
           Where spras = 'EN' AND
                 waers = ls_ac_attr-value.
      If sy-subrc = 0.
        ls_contextvalue_set-value = ls_ac_attr-value.
     ls_contextvalue_set-value = ls_ac_attr-value.
        ls_contextvalue_set-text = ls_tcurt-ktext.
        IF ls_ac_attr-DFT_FLAG = 'X'.
          lv_default_currency = ls_contextvalue_set.
        ENDIF.
        append ls_contextvalue_set to lt_contextvalue_set.
      endif.
    Endif.
endloop.
lo_nd_zebuy_describe_item_info = lo_nd_zebuy_describe_item->get_node_info( ).
lo_nd_zebuy_describe_item_info->set_attribute_value_set(
                                exporting
                                   name = 'ZCURRENCY'
                                  value_set = lt_contextvalue_set ).
*...End build currency drop down list
This code works fine. The issue I am having is that the drop down is behaving like a search help field rather than a drop down list. Meaning a popup comes when I drop down the list. The popup has the values I have set. I don't want a popup I want a drop down list. Additionallly the field is editable (meaning I can type a value into the field as well as select a value). I want the user to only be able to select values from the list. Any help with this issue would be appreciated.

I fugured out what I was doing wrong. I was setting the cell editor to cl_salv_wd_uie_input_field later in the code by mistake.

How can I keep a state machine readable when using large amounts of in/outputs

Hello, I am new to Labview,
Read trough the fundamentals and the
getting started and a lot of examples.
What I want to do is use a standard
state machine from the template, and add some stages, for example
orange, apple, banana. At this point I can use numeric controls to
put in the amount of oranges, apples, bananas there are. I can even
use a led to tell the user which state of the state-machine is
active.
The thing is there will be more numeric
controls and more leds and it would be nice if the code would still
be readable when there are 20 inputs and 20 outputs.
Questions
(1) It would be nice if I could use the
typedef to select the right state AND the corresponding numeric
controls and leds out of a cluster or an array kind of structure to
keep the number of wires low. Is this possible, how can I do this?
(2) I tried to put the numeric controls
into a cluster but that way I can't put the numeric control for the
apples in the upper right corner and the numeric control for the
oranges in the lower left down corner of the front panel.
(3) An example would be really nice, I
know that I saw some examples describing this problem but there are
so many examples that after a few hours of searching I haven't found
the right one yet.
Thanks in advance for the effort.
p.s. I will not use Labview to do
calculations on fruit, I am only using this to make the question
easier to understand.

I can only start a proper answer but I might as well start with that.
When I am developing State Machines I have to think about what data is used and manipulated in each state. I then have to think about where am i going to keep and manage the data. I list all of the fields that are "touched" in each state and what values are used together and which are independent form the others. After this phase of the analysis, I usually have some data structure defined (cluser array etc).
Then I flipp from thinking about the state to thinking about the data (after all this is LabVIEW and the data-flow paradigm is critical). If I see data that is only used by the State machine and is used in many of the states, then the data structure get put in a shift-register for easy access in each state. This maybe enough of an answer for your fruity question.
When i see data that is shared or only used in a handful of states then I concider putting the data in an Action Engine. Depending on how you design your AE, you can access each of the fruit totoal by name or increment etc as required.
If your app demands many fileds that are all related (can't be broken into distinct data structures) then create a cluster that has all of your values that are used by the AE. Then create an Wrapper VI for each call of the AE but only put the associated fields on the FP of the wrapper and then bundle that value into the cluster and invoke the AE.
Ben
PS: Sorry about reverting to neBulus mode but this topic could take days to cover in detail.
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Lockup when using stopwatch feature.

Has anyone experienced a lock up of their Nano 3rd gen when using the stopwatch feature? My iPod locked up while a timer was running and the power save settings for the screen kicked in. After the screen shutoff (power save setting) the unit locked up and had to be reset. I was able to reset the unit using the recommended procedure. I was wondering if this has been a problem seen by anyone else?

Yes; I've noticed where my Nano will lock-up when using the Stopwatch. Basically, I don't use it as a stop-watch (nice idea, though).

Performance Impact When Using SNC Communication

Hello,
Does anybody know if and how much performance impact there is if we use SNC for communication between the SAP Server and SAPGUI?
I think there are two areas that may be impacted; Network and server CPU.
For network load, I did find a part in "Front-End Network Requirements for SAP Business Solutions" document saying "overhead of roughly 350 bytes per user interaction step" but it does not specify the type of encryption. I wonder if there is any other info on this?
For CPU impact, how much overhead should I consider for sapgui access?
I see no field for this in the quicksizer and I can't seem to find any white papers on this subject.
Thank you in advance.

>
Peter Adams wrote:
> Ken,
>
> if you plan to use SAPcryptlib for SNC between SAP servers, then you should use a SAPcryptolib-compatible solution for the SNC communication between SAPGUI and SAP server, and there is only one vendor who can provide this. Let me know, if you need help finding it. My contact information is in my SDN business card.
Just so Kan is clear - It is not legal to use the SAP cryptolib provided by SAP for SNC between SAP GUI and SAP servers, so if x.509 is the desired mechanism you need to purchase additional software from the company which Peter works for to provide SAP GUI SNC-based SSO. I think instead, Kan might be using the free SAP supplied SNC Kerberos library, which is why I asked him to confirm this in my last post. I doubt he is interested to buy any third party software.
> As to the performance discussion: first of all, yes, there will be a small performance impact if SNC is used (no matter which type or implementation), but from our experience with many actual SNC implementations, I can state that this is practically not relevant. It is not noticeable by users. There were never any performance discussions with customers. See also SAP Note 1043694.
I agree with this - the performance impact is not noticed by users, but the system managers who look after the servers where SAP is installed, and the team responsible for the network need to be aware of any differences (if any) when SNC is turned on and when SNC is turned off. I think this is why Kan is asking these questions, not because he is concerned about users noticing any difference when they logon to SAP.
> Just a first quick comment on certain statements above: Tim's arguments for proving his overall statement are not conclusive from my perspective. Nor do I think his overall statement itself is correct.
The facts I mentioned are well known facts, e.g. symmetric crypto is far better from performance point of view than asymmetric. I know the examples I have shown which I found when doing a quick google search were not conclusive, but they were shown as initial examples, not necessarily the best examples. This is why I specifically mentioned that if you search in google yourself you will see many more references where comparisons are done between Kerberos (e.g. symmatric) compared with PKI (e.g. asymmetric).
> First of all, he only selects one aspect of performance - CPU impact of encryption algorithms.
No, I didn't. Some of the examples I referred to also discuss other differences. I also mentioend other differences such as memory and what protection level is used when configuring SNC.
> But for a true comparison, you'd have to look at all relevant aspects (latency, network overhead, ...).
Yes, I agree. No doubts here.
>Network performance overhead is usuallly worse with Kerberos than with PKI.
This is not true. When SAP is using SNC, the GSS-API standard is used and so the only network communication involves SAP software sending a standard GSS token from the workstation to the SAP server, and this GSS token is often about the same size, regardless of which mechanism is used, so any network performance differences are not related to the mechanism, but more related to the complexity of the cryptography used on each end (mostly on the server side).
>Second, you need to look at the specific usage scenario. For example, the first report referenced by Tim is an analysis about different Token Profile mechanism for WS Security, for one specific implementation. This does not allow to draw any conclusion for the SNC use case in general, and for sure not for a specific implemenation. It does not take the overhead for the encryption of the message content into account. Third, Tim associates PKI exclusively with asymmetric encryption. Yes, it is well known that asymmetric algorithms are slower than symmetric ones, but it is also well known that the encryption of the message content (by far the majority of the data) happens with symmetric encryption algorithms in the PKI scenario. With PKI-based SNC, you can even select a symmetric algorithm and use a more performant one that the ones that Kerberos prescribes.
Kerberos works with many different symmetric algorithms as well, so mentioning that the alg is selectable is not relavent to any comparison.
> To summarize, I will try and collect facts that will support the opposite point of view. From our practical experience, the performance overhead is not relevant, and criteria like consistency with SAPcryptolib, strength of security, ease of administration, choice of authentication and encryption mechanism, etc. are much more important.
>
> Peter

Why does the PC lockup when using a 6071E with an ASUS P5ND2-SLI motherboard?

Please Help,
Thanks,
Brian
Problem Summary:
PC locks up to a point that will not allow keyboard control. Sometimes the system reboots itself. This code works on Win2000 systems and XP systems with a different motherboard. I have the Hyperthreading disabled. I have also tried switching PCI slots to use different IRQ’s.
Code: Code crashes right after last line function: GPCTR_Control(). No errors reported.
//Board Model = "NIDAQ PCI-6071E", device code: 223
short sSampleTimeBase = 1;
unsigned short usSampleInterval = 2; //ActualSampleInterval = (1microsec) * 2 = 2.0 micro sec
short sMode = 1;
short sPolarity = 0;
double dScanRate = 10; // 10Hz
short psBuffer[20];//double buffering at 10Hz
unsigned long ulBufferSize = 20;
int iChannelCount = 1;
short sChanList[1] = {1};//chan nums start at 1, NOT 0
short sGainList[1] = {1};//set gain to 1
Init_DA_Brds( m_sDeviceNumber, &sDeviceCode) ;
AI_Configure( m_sDeviceNumber, sChanList[0], sMode, 0, sPolarity, 0 ) ;//add ONE channel
Select_Signal(m_sDeviceNumber, ND_IN_SCAN_START, ND_RTSI_0, ND_LOW_TO_HIGH);
Select_Signal (m_sDeviceNumber,ND_RTSI_0, ND_GPCTR0_OUTPUT,ND_DONT_CARE))//the first card is master card
DAQ_Rate(dScanRate, 0, &sScanTimeBase, &usScanInterval);
DAQ_DB_Config( m_sDeviceNumber, 1); //"1" enable double buffering
SCAN_Setup( m_sDeviceNumber, (short)iChannelCount, sChanList, sGainList );
SCAN_Start( m_sDeviceNumber, psBuffer, ulBufferSize, sSampleTimeBase, usSampleInterval, sScanTimeBase, usScanInterval );
GPCTR_Control(m_sDeviceNumber,ND_COUNTER_0,ND_RESET);
GPCTR_Set_Application(m_sDeviceNumber,ND_COUNTER_0, ND_PULSE_TRAIN_GNR); //Begin Counter Pulse Train
GPCTR_Change_Parameter(m_sDeviceNumber, ND_COUNTER_0, ND_SOURCE, ND_INTERNAL_100_KHZ); //set internal counter
GPCTR_Change_Parameter(m_sDeviceNumber, ND_COUNTER_0, ND_COUNT_1, 100000/(unsigned long)dScanRate/2);//set pulsewidth 1, 100kHz/ScanRate/2
GPCTR_Change_Parameter(m_sDeviceNumber,ND_COUNTER_0, ND_COUNT_2, 100000/(unsigned long)dScanRate/2);
GPCTR_Control(m_sDeviceNumber,ND_COUNTER_0,ND_PROGRAM)) //program the ATMIO card
System Info:
Operating System(OS): Microsoft Windows XP
OS Version: 5.01.2600
OS Info: Service Pack 2
Processor: Intel(R) Pentium(R) 4 CPU 3.40GHz / x86 Family 15 Model 4 Stepping 1 / GenuineIntel / 3400 MHz
Number of Processors: 1
Physical Memory: 1,048,044 KB RAM
Drive C:\ 238,293,104 of 244,187,968 KB free
Motherboard: Asus P5ND2-SLI
Chipset:
nVIDIA nForce4 SLI - Intel Edition ( Crush 19 )
nVIDIA MCP-04

Brian,
This problem is a little hard to pinpoint. When you
say this code works on a Windows 2000 and Windows XP machine do you run it with
the exact same card, or with another DAQ card? From the code you provided
it looks like you are using the device to generate a pulse train. Are you
able to run any other code that generates a pulse train? You might try
the code located here:
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DFFB56A4E034080020E74861&p_node=201235
Are you able to perform other types of operations with this device, perhaps
analog input? If you only use Measurement and Automation Explorer (MAX)
to create a pulse train, does your computer freeze? You can test the analog
input and pulse train generation through MAX by expanding Devices and
Interfaces >> Traditional NI-DAQ and selecting your device. Next
select Test Panels and either Analog Input or Counter I/O. What version
of Traditional DAQ are you running? If it is an older version, does upgrading
your driver help?
Finally, if you still have DAQmx installed (or if you can install it) can you
generate a pulse train in test panels?
Regards,
Jesse O
Application Engineering
National Instruments
Jesse O. | National Instruments R&D

When using SUS, clients say software's up to date when it's not.

I'm trying to get my Software Update service up and running and it all seems to be working (clients see server) except that every client reports that software is up to date even though I've got all updates copied and enabled (just trying to save bandwidth) and I'm certain they need several. Any thoughts?
I'm using OS X server 10.5.6 and the issue exists with tiger and leopard clients.

Thanks for the response. I can see the file in a browser but did notice a FQDN disparity.
the clients are set to look to sus.something.org:8088/index.sucatalog which lines up with how our DNS is set up. In the index.sucatalog file, however, it says image.something.org. I've never had "image" as an entry in our DNS system so i'm not sure where that's coming from. As a test, i did a find and replace on the file and replaced "image" with "sus" and then it worked. the problem is that when a change is made and the file is updated, it's back to "image."
How can I change this so that it will update the file with the correct FQDN?

Time Machine Stops when using External Drive

I recently purchased Seagate GoFlex Desk 3TB external drive. It is connected in USB port for MacPro. Unfortunately, Time Machine starts backup, but it is discontinued after several minutes with message "cannot create backup folder." The backup seems to stall before it gives message, since the file count on the backup seems to stop. Any suggestions as to why this external drive will not work with Time Machine? Any suggestions on how to resolve the problem?

The external Seagate GoFlex Desk 2.0/3.0 usb drive starts and runs the backup for awhile, and then after 40-50 gb of backup quits, and I get a message that backup failed. When I restart the Time Machine backup, the prior backup seems to be on the disk, but it will only run for a period of twenty minutes or so, and then it will stop the backup. I thought that there might be a problem with the 2.0 usb capacity as too slow, but I haven't seen anything to indicate that the speed would be the problem. I also have seen that the GoFlex Desk drive has a problem with Lion OS, but the Seagate site seems to say it is compatible. Any suggestions are appreciated.

ITunes muting when using Voice communications- Teamspeak/Ventrilo

Whenever someone keys up on Teamspeak/Ventrilo it will cause my iTunes to mute. The song will continue to play just you can't here it unless you start the song over or pause and play. Any suggestions would be greatly appreciated.
Windows XP

Hello every1,
i have the same Issue in ventrilo. My voice is so slow when i talk. but when i installed Skype my voice sounds normal and i think its better than Ventrilo.
am using Skype instead of vent when i play Arena in wow. when i have Raids i get into Vent just to listen to my guild buddys.

Freezing/beachballing/lockups when using foreign wifi

Like my new Air it's pretty stable accept for one phenonmenon when I get on outside wifi networks. It goes like this:
-Get on open wifi network from somewhere work a little bit.
-Close macbook and packup.
-keep macbook closed long enough for standby to kick in (70 minutes)
-Return home and open up macbook air.
Internet connection refuses to work. Launching apps will trigger beachballs, quitting apps will trigger beachballs (sometimes on certain apps, sometimes on all of them). Hard to logout or restart because locked up apps are blocking the process. Sometimes I can succesfully log out and restart the system, which will fix the problem. Sometimes I am not as lucky and I have to force shutdown.
It's difficult for me to recreate the issue since I have to go out to do that. I have resetted the SMC, I can't tell if that will help. I'm sure it is related to connecting to outside wifi networks because this is the only general condition when this will happen. I hope I don't have to constantly do restarts and SMC resets to keep this from happening. My mid 2007 iMac was never this flakey.
Has anyone had a similar problem?

Just a follow up...
I was never able to get to the specific cause of the problem. I reformatted and the problem never came back. The only difference was that I restored my system by manually copying off my backup rather than using Migration Assistant. (MA)
That was the first time I had used MA and I had told MA to only copy home folder/user files from the old system in hopes of minimizing potential issues. I can only conclude that MA had caused an issue with the installation.

Use of communication user in RFC of HCM process types

Dear All,
I have created an HCM-PA package, and when used a communication user in the RFC it gives me the error that no data exists for your user in the Transfer selection criteria activity (This is not an issue with defining target areas I have confirmed)
I then used my ID ( a dialog user) and it works well. However, now I want other users (about 10) to be able to run their respective packages. Does that mean I have to add each of these 10 users to the RFC? How can I resolve this without having to use their ID in the RFC maintenance?
Thanks
Harmeet

Hi Harmeet,
the easiest thing to do is to define a CPIC user in your receiver system destination and then to use the customising activity "Set technical switches". Here you can set a switch called SND_LOGON to the value 'X'. When you do this, the person who calls the transfer program with the activity "Transfer Selection Criteria" must explicitly log on using their own sender system user.
This method means that the user must have the correct HCM authorisations and prevents that a dialogue user is defined in the RFC definition (which, of course, anybody could use).
Hope this helps.
Gerard.

Machine freezez/lock ups when using password protected certificates in IE 11 Windows 8.1 Pro

When using certificates that have a password enabled and private keys we find the machine hangs up competly with the memory usage jumping to 99%. The main process being the Local Secuirty Authority Process that causes the machine to lock up. The work
around we have is to remove this certificate and import a new certificate making sure we un-tick the check box for private key password.
Not sure if this
KB2813237 is linked, but this hotfix is available for Windows 8.1 Pro OS.

Hi Simon,
You can try that suggestion and check whether it is solved and give your result, if there is any other issue, you can post it back.
Regards
Wade Liu
TechNet Community Support

Machine lockup when using World Community Grid software

Similar Messages

Maybe you are looking for