Macintosh HD IS NOT ON MY COMPUTER :(

i cant find my macintosh HD!! i tried to search on the upper rit.. but it doesnt exist.. i bought this macbook pro last month...

Apple has done some more hiding tricks to protect users from themselves placing stuff it doesn't belong.
Simply click on the Desktop area and switch to Finder and access the Go menu Go to Computer and that will open a window listing your volumes and their names.
The default name for your boot volume is "Macintosh HD" but it might have been changed to another name.

Similar Messages

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

I am trying to do a factory reset on my macbook air, but when I do the command power button, I am only seeing the macintosh HD option not the recovery hd option previously mentioned.

I am trying to factory restore my macbook air, I tried following a youtube video performing the option + power button and am only getting the macintosh HD option not the recovery HD option. Is there another way to reset the computer?

The proper shortcut is COMMAND-R, not COMMAND-PowerButton. See the following:
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

"Macintosh HD could not be repaired"... Do I need a new hard drive?

So my macbook pro when I turn it on goes straight to the apple screen like normal, then it just sits there and loads forever.
I then booted it with the Disk Utility and tried Verifying and Repairing the disk (I selected my hard drive). The repair couldn't be completed and it said that "The volume Macintosh HD could not be repaired." I tried it a couple times with the same result.
Then I booted in Safe Mode and ran the "fsck -fy" in which I got a series of errors in response. The following is what I got back:
"Invalid leaf record count
(It should be 283 instead of 287)
**Checking catalog file.
Invalid sibling link
(4, 26092)
**Rebuilding catalog B-tree.
**The volume Macintosh HD could not be repaired."
I did a little bit of research on similar problems and everything has said that the hard drive is crashed and that I will need a new one.
Suggestions said to clone the hard drive to hopefully not use the files but that ultimately I need to buy a new one from The Apple Store.
Does anyone have any input as to how I should go about fixing this, keeping the files, and maybe not having to buy a new hard drive? Or what do I need to do to go about having a running computer?

I don't believe that the evidence you have presented necessarily indicates a physical failue of the drive; neither does it disprove it. What we do know is that crucial data structures on the disk have been corrupted.
Ideally, you have a current backup of your data (could be via Time Machine, disk cloning software, and/or online backup; multiple backups would be even better). If so, try reformatting the drive (while booted from your recovery partition if your system is new enough or the disks that came with your older system), reinstalling the system, and restoring from the backup. That should suffice if there is no hardware problem and your backups were from before the corruption.
Let us know if that helps. If you need further assistance, please let us know the model and year of your MacBook Pro and the version of [Mac] OS X you have been running on it.

The backup disk image "/Volumes/Data/Macintosh.sparsebundle" could not be accessed (error (null))

I keep getting "The backup disk image "/Volumes/Data/Macintosh.sparsebundle" could not be accessed (error (null)).
I have updated the firmware on the Time Capsule and unplugged and replugged it in after waiting more than 10 seconds.
I cannot access the sparsebundle to repair from the Disk Utility.
Does anyone have any other suggestions?

It sounds like you have already tried some of pondini's suggestions..
But C17 is the main one, even if the error is a different number..
http://pondini.org/TM/Troubleshooting.html
Mavericks in particular is having issues with the TC..
So I strongly recommend a full factory reset of the TC.
Make sure all names are short, no spaces and pure alphanumeric. See C9 for more info.
Because Mavericks now uses SMB by default for network protocol, it is worthwhile mounting the TC manually using AFP.
In finder use the top menu, Go, Connect to Server.
Type in as follows,
AFP://TCname
Replace TCname with your actual TC name..
If the computer fails to find the TC, try again using the full domain name.
AFP://TCname.local is the standard one. The TC opts for local although you now have no place to set it in the airport utility.
If you still have trouble tell me.
Once the computer locates the network resources, it will ask for a password, public by default. Type in your password if you changed it or public. And store it in the keychain.
Now reset TM.. see A4.
And point the TM to the TC again which you have mounted.
See if that helps.

Ipod touch not recognized by computer or ITunes

Ipod touch is not recognized by computer or Itunes. Tried it on Windows XP OS and also Windows 7. Error message OxE8000068, unknown error, appears. Thanks for any help!

Try here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Logic 9 not responding to computer keyboard correctly

In Logic Pro 9, dialog boxes (such as the Save As) do not receive the computer keyboard strokes. Instead, Logic processes them as key commands. This even though the dialog box has the focus and the mouse can select fields and highlight their entries. Very strange. Typing sometimes works correctly, but usually not. And once it doesn't, even if it did earlier, I must reboot to have a hope to fix it.
This happens with the Save As dialog, and with any other dialog box that has typeable fields.
I am current on Logic 9 and Mac OS X.

Okay, I figured out enough to work around it and to fix it without having to restart Logic or reboot. I can't work out the exact chain of events to reproduce it, but here are the important things to do if it happens. And BTW, it happens to me on the File>Bounce dialog box, not the File>Save As dialog. I assume this is actually a bug.
1.) Sometimes the key commands do get disabled, and none of them work. So you have to go to Logic Pro > Preferences > Key Commands and select Options > Initialize. Just like immo says.
2.) Sometimes, this isn't enough. In which case, do two more things...
3.) Be sure the Arrange subwindow has the focus (ie, the white band around the window), and
4.) Be sure the first time you try to enter anything into the Bounce dialog window it is in the Save As filename field, not the End measure numeric field (or any other). If I try to enter any keyboard values into any other field first, I can't and I also can't then enter anything into the Save As field either. I then just have to start over again with the key command initialization step and so on.
These workarounds combined have allowed me to always recover from this issue. Though I do have to do them multiple times in a session, at least when I'm bouncing down.
Thanks everyone for your input and help!
Best,
Brian

I'm not really a computer guy.Just got a Kodak easy share camera. When I import the photos, they go to the area with my name in a file with the date. How can I move them to iphoto, or even better, import them directly to iphoto??

I'm not really a computer guy. I just got a Kodak"easy share" camera. When I import the photos they go to the section with my name in a folder. How do I get them from there to iphoto, or better yet, how can i import them directly to iphoto?? As stated, I'm not knowledgable,have an imac and need real rudimentary direction.

in the iPhoto preferences be sure the action when camera is connected is open iPhoto
What program are you using to import the photos?
If they are in a folder you can drag that folder onto the iPhoto icon in the dock to import - our launch iPhoto and under the file menu import from that folder
For real rudimentary directions try the iPhoto tutorials - and it would be a worthwhile investment of time to take the iphoto tutorials - http://www.apple.com/findouthow/photos/ - they are very helpful and will save you a lot of time and frustration. for the concepts - actual commands mya have shanged in some cases - and under the iPhoto help menu ==> iPhoto help - watch the videos there
LN

The security database on the server does not have a computer account for this workstation trust relationship

When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>

Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD

Installed but not found on computer

I've successfully installed the latest 10.1 for my 64-bit laptop with Windows 7. A check by Adobe confirms that it was properly installed, and that I have the correct version for my computer.
AND YET, there is no icon for it anywhere, it doesn't come up on my list of Programs, when I enter "Adobe Flash Player" in the search bar it shows no such program, and when I try to play a FLV file, it won't give me Flash Player as an option. So..... I have it on my computer, but I apparently am not allowed to see it or access it?
I've uninstalled and re-installed several times, and cannot for the life of me figure out what the problem is. Any help for this maddening situation?

Hi,
Yes, I read his comments and I made sure Shockwave Flash Object was enabled in IE as he suggested. I am trying to make a flip book. One of the posts here in the forum said to make a SWF file, which I did. But now I can't figure out how to do anything with it. I thought Flash Reader was the right program to look at it, but maybe I'm wrong? Maybe I need Flash itself? The flip book thing has me pretty frustrated and confused. All the sites and software I've tried are poor quality. I was hoping I could figure out how to do it through Adobe to get better quality.
1. Oct 17, 2010 1:30 PM in response to: jonstrebler
Re: Installed but not found on computer
Hi, Flash Player is a browser plugin, not a stand alone Player. You should have Shockwave Flash Object in add ons in IE and make sure it is enabled.
Your Flash files are in C:\Windows\SysWOW64\Macromed\Flash
You may want the Adobe Media Player:http://www.adobe.com/products/mediaplayer/
Hope that helps,
eidnolb

After doing a suggested update of itunes on my pc it will not open and gives me a msg saying msvcr80.dll is not on my computer and windows error 126 has occured

After doing an update of itunes on my pc Itunes will no longer open and gives me a msg about MSVCR80.dll not on my computer and Itunes was installed incorrectly error 7 (windows error 126)

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

How Do I Correct FF GUI From Not Opening After Computer Restart

Every time I restart my Win8 and then FF, the FF GUI does not open (i.e. the browser window does not appear) although Task M shows FF as running. Only work around so far is to re-install FF (obviously using another browser to access the download install site). I tried disabling all add-ins and this had no affect. Even if I exit FF before restarting the computer, the same issue occurs. If I exit FF but do not restart the computer, FF will re-start normally, meaning the browser window appears.
This started occurring a couple of weeks ago. At that time I did a System Restore back to a point before it started happening and that did not correct the issue.
I also uninstalled FF keeping my settings but the issue remained when I re-installed FF. I even went to the extreme of uninstalling and not keeping my settings and then reinstalling and adding my add-ins and setting my options (a couple hours of work) and the issue still remained.
Once it is open I see no problems with it or any add-ins.

Hi,
From your issue description I understand that, you are unable to open any applications and the computer freezes.
I can imagine the inconvenience you have experienced. Don’t worry; we will certainly help you.
I would appreciate if you could answer the following question:
1. What is the make and model of your computer?
2. Did you receive the windows 8 preinstalled with the computer?
3. What happens when you try to perform Refresh or Reset? Do you receive nay error messages?
Let’s try some steps before performing Refresh or Reset.
Follow these methods and check if it fixes the issue.
Method 1: Run the Performance troubleshooter and check if the issue persists.
Follow the steps to run the troubleshooter:
a. Press Windows key + C on your keyboard to show the Charms bar.
b. Type Troubleshooting and click Troubleshooting under Settings.
c. Now type Performance Troubleshooter in the search option.
d. Click on Performance troubleshooter to run the troubleshooter.
Method 2: Start your computer in safe mode and check if the computer freezes.
Step 1: Refer this link to start the computer in safe mode.
http://windows.microsoft.com/en-IN/windows-8/windows-startup-settings-including-safe-mode
If it works fine in safe mode, perform clean boot.
Step 2: Perform clean boot.
Clean boot will help us identify if any third party applications or startup items are causing the issue.
To do this, follow steps from this link:
http://support.microsoft.com/kb/929135
NOTE: After checking the functionality in clean boot, configure Windows to use Normal startup. Refer step 3 from the above link for details.
Method 3: Restore your PC to an earlier point in time.
a. Swipe in from the right edge of the screen, and then tap Search.
b. (If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Search.) Enter Recovery in the search box, tap or click Settings, and then tap or click Recovery.
c. Tap or click Open System Restore, and follow the prompts.
To perform refresh, or reset, refer to this link: How to restore, refresh, or reset your PC
http://windows.microsoft.com/en-IN/windows-8/restore-refresh-reset-pc
Refresh Warning: The apps that came with your PC or you installed from Windows Store will be reinstalled, but any apps you installed from other websites and DVDs will be removed. Windows puts a list of the removed apps on your desktop after refreshing your PC.
Reset Warning: All of your personal files will be deleted and your settings will be reset. Any apps the came with your PC will be reinstalled, but all other apps will be removed.
Hope this helps. If the issue persists or any Windows related queries or issues related to Windows Operating system, please get back to us. We are here to assist you.

I set up my emails coming in on my computer so they would appear on my ipad, the only problem I am having is that sometimes my emails are only coming in on my ipad and not on my computer. Until I open them on my ipad they will not appear on my computer.

I set up my emails so when they arrive on my computer, they would also arrive on my Ipad. The problem I'm having is there are times when an email arrives on my Ipad but not on my computer. Unless I open the email on my Ipad, it will not open on my computer. How can I have the two divices work in unison where the emails arrive on both at the same time?

Both libraries would need to have been setup to use home sharing with the same Apple ID in order for that to work.

HT1296 Can't get my Music off of my iPhone 4. My computer died & had to get a new one, so now I cannot sync my iPhone 4 with the new computer, without losing all of my Music, because the only Music I have is on the iPhone 4 only, not on the computer. Help

Can't get my Music off of my iPhone 4...
My computer died & had to get a new one, so now I cannot sync my iPhone 4 with the new computer, without losing all of my Music, because the only Music I have is on the iPhone 4 only, not on the computer. No Backup anywhere : (
If I choose to sync it tells me all of the Content that does not match the iTunes library on the computer will be erased, do you want to proceed & I have to say no.
How do I replace the music library on my Computer with the Music on the iPhone?
I got my pictures off because you can access them when you connect the iPhone using Windows 7 but you cannot see any of the music so you cannot access it when using windows so don't know what to do...
Help...

The music sync is one way - computer to iphone. The only exception is itunes purchases. File>Transfer Purchases
It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to move everything to your new computer.

Macintosh HD IS NOT ON MY COMPUTER :(

Similar Messages

Maybe you are looking for