MacMini Time Sync Issues
Hi All
I have a MacMini (Late 2012) that i am having issues with.
When i got the MacMini, it came with Lion which was then upgraded to Mountain Lion and now finally on Mavericks. However, since updating to 10.9.x i have noticed that the time on the mini seems to be going about 45 seconds fast every day (which means by the end of the week the time is approx 4 minutes ahead of what it should be). I have checked in Date & Time prefs and the time is set to automatically sync with Apple Europe.
I did try also to disable to auto time sync but still the problem remained.
So now every few days i go into Date & Time Prefs for the time to sync back.
The mini is connected via ethernet and is always on.
Any suggestions would be welcome
Many Thanks
1. For sure, there in VM settings you have time synchronization from host unchecked.
2. Network monitor will reveal what happens when you stop annd start Windown Time service and Systém Event log contains relevant data.
M.
Similar Messages
-
I have been having issues getting my XP workstations to sync with the time
of my Netware 6.5 SP 6 servers. I have one server set as the time source
which gets it's time from time.nist.gov just fine. My pc's are set in the
client to get that time from the server (default setting). However they
don't get the time. No matter what I do unless I physically change the
time
on my pc's can I get them to time sync with the servers?
Any tips or hints?
ThanksAssuming you have client32 installed, they only get the time on login, not continuously through the day. Additionally they get UTC time and adjust it to the timezone set in Windows. What is the nature of the time difference between them and teh server? Is it an exact number of hours?
The other issue that will stop client32 getting time from the server is if the server is not in timesync with its tree. Load DSrepair on the server holding the Master of the affected partition. From the first menu run a TimeSync Check and a Report Sync Status. When finished, exit DSrepair and post the relevant portion of SYS:SYSTEM/dsrepair.log here, thanks. -
IPhone Calendar Appointment time syncing issue
I have noticed lately that appointments I enter into my iCal on my Desktop when synced with my iPhone are showing up an hour later. For example: If I made an appointment from 9AM to 10AM it will (when synced) show up on my iPhone 10AM to 11AM. I am not sure if it has to do with the latest iPhone update (1.1.3) or with Leopard. Has anyone had this issue? Any thoughts on how to resolve it? Thanks.
One thing to check out is on your iphone go to settings > general > date and time.
In date and time, make sure your time zone is set correctly.
If the time zone is set correctly, turn time zone support off.
Then make sure your date and time is set correctly.
Power off the iphone by holding down the power button on the top of the iphone until you see the slide to power off.
Now power the iphone back on.
Connect the iphone to the computer and sync.
Hope this helps. -
Windows Server 2012 Member Server Time Sync Issue.
We are running in a situation where our Windows Server 2012 member Server not syncing the time from Domain Controller
Time Source is pointing to Local CMOS Clock.
Trying to Sync forcefully it getting the error as the computer did not resync because no time data available.
Performed unregistered the time service and registered the service same issue.
Kindly assistHello,
This seems not related to SQL Server but more related to IIS.
Try setting the trust level to full using the following article:
http://www.iis.net/learn/application-frameworks/scenario-build-an-aspnet-website-on-iis/configuring-step-4-configure-application-security#42
If the above does not solve the issue, please post your question on the following forum:
http://forums.iis.net/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Time sync issues after windows update
Hi,
After running a windows update on VM PDC controller server can't syncronize time with online pool (update took approx 10 minutes). Event log is showing error ID 50 (The time service detected a time difference of greater than 5000 milliseconds for 900 seconds)
and time is off for 10 minutes which causes problems with Exchange and Lync services.
According to event log there has been 4 succesful connections with NTP servers before event 50 appeared on log:
The time service is now synchronizing the system time with the time source 1.uk.pool.ntp.org,0x1 (ntp.m|0x1|0.0.0.0:123->178.79.191.28:123).
The time provider NtpClient is currently receiving valid time data from 2.uk.pool.ntp.org,0x1 (ntp.m|0x1|0.0.0.0:123->87.117.251.45:123).
The time provider NtpClient is currently receiving valid time data from 3.uk.pool.ntp.org,0x1 (ntp.m|0x1|0.0.0.0:123->178.79.160.57:123).
The time provider NtpClient is currently receiving valid time data from 1.uk.pool.ntp.org,0x1 (ntp.m|0x1|0.0.0.0:123->178.79.191.28:123).
After running manual resync time is corrected, but it takes time to populate through domain computers without running gpupdate /force on each PC in domain.
PS C:\Windows\system32> W32TM /query /status
Leap Indicator: 0(no warning)
Stratum: 4 (secondary reference - syncd by (S)NTP)
Precision: -6 (15.625ms per tick)
Root Delay: 0.0447998s
Root Dispersion: 7.8017179s
ReferenceId: 0x557750E8 (source IP: 85.119.80.232)
Last Successful Sync Time: 12/06/2013 16:44:09
Source: 0.uk.pool.ntp.org,0x1
Poll Interval: 6 (64s)
PS C:\Windows\system32> W32tm /query /configuration
[Configuration]
EventLogFlags: 2 (Local)
AnnounceFlags: 5 (Local)
TimeJumpAuditOffset: 28800 (Local)
MinPollInterval: 6 (Local)
MaxPollInterval: 10 (Local)
MaxNegPhaseCorrection: 3600 (Local)
MaxPosPhaseCorrection: 3600 (Local)
MaxAllowedPhaseOffset: 300 (Local)
FrequencyCorrectRate: 4 (Local)
PollAdjustFactor: 5 (Local)
LargePhaseOffset: 50000000 (Local)
SpikeWatchPeriod: 900 (Local)
LocalClockDispersion: 10 (Local)
HoldPeriod: 5 (Local)
PhaseCorrectRate: 7 (Local)
UpdateInterval: 100 (Local)
[TimeProviders]
NtpClient (Local)
DllName: C:\Windows\system32\w32time.DLL (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
AllowNonstandardModeCombinations: 1 (Local)
ResolvePeerBackoffMinutes: 15 (Local)
ResolvePeerBackoffMaxTimes: 7 (Local)
CompatibilityFlags: 2147483648 (Local)
EventLogFlags: 1 (Local)
LargeSampleSkew: 3 (Local)
SpecialPollInterval: 3600 (Local)
Type: NTP (Local)
NtpServer: 0.uk.pool.ntp.org,0x1 1.uk.pool.ntp.org,0x1 2.uk.pool.ntp.org,0x1 3.uk.pool.ntp.org,0x1 (Local)
NtpServer (Local)
DllName: C:\Windows\system32\w32time.DLL (Local)
Enabled: 1 (Local)
InputProvider: 0 (Local)
AllowNonstandardModeCombinations: 1 (Local)
VMICTimeProvider (Local)
DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
Server is not taking time from bare metal as it's running on Hyper-V and it seems that it's not syncing during startup correctly. Is there a possibility that there can be a config issue as it's working fine when reboot doesn't take too long?
Regards,
Marcin1. For sure, there in VM settings you have time synchronization from host unchecked.
2. Network monitor will reveal what happens when you stop annd start Windown Time service and Systém Event log contains relevant data.
M. -
Premiere Pro audio sync issues with 48khz audio on video file and 44.1khz audio on external audio
So, I recorded video and audio on my Canon 5D Mark II at 1080p, 23.976 fps, and 48khz, 16-bit Stereo audio. And I used a Zoom H4 to record an mp3 audio file at 44.1khz Compressed. When trying to sync the audio in Premiere Pro CC, the audio slowly loses sync over time. I already tried to convert the 44.1khz mp3 file to 48khz in Adobe Audition. But that didn't fix the problem. Any ideas?
There's always time-stretch changes to the audio file with "keep pitch unchanged" checked, I suppose. Mind you, I've heard of people doing it but haven't done it myself. There's other possible options I'm sure. There's been quite a few threads here on time-sync issues over time.
-
Time sync monitor for all windows member servers
How to monitor time sync issue on all the member servers and domain controllers. Can we monitor through scom 2007 r2. Specially we need an alert when all the member servers are not in time sync.
B JohnThere is no monitor for exactly your ask.
The AD management pack includes a Time Service Health monitor for DCs that makes sure the time service is running:
http://social.technet.microsoft.com/Forums/en-US/0c921fa7-45ed-4bee-8f53-c92c750f6cbf/scom-module-for-monitoring-time-sync-issues?forum=operationsmanagergeneral
Here is my "domain time tip:"
Select your preferred time server from this list
http://tycho.usno.navy.mil/NTP/. For example 'tick.usno.navy.mil'.
Then run these commands on your PDC emulator of the domain:
W32tm /config /syncfromflags:manual /manualpeerlist:"<DNS-name-of-time-server>"
W32tm /config /reliable:yes
W32tm /config /update
W32tm /resync
Net stop w32time
Net start w32time
If you execute these commands, AD defaults will cause all your member servers to discover the domain time standard and update to it.
Good luck,
John Joyner MVP-SC-CDM -
Since up grading to the new OS Lion basicly problem free except my iPhone iPod and iPad all give me sync issues they load apps , music , books , movies , but refuse photos and the sync ends with an error 50 message most times , yes I have re booted reinstalled new i Tunes and all my others help ! I have update every thing I can re installed , no other issues apart from Parallels and windows which I have deleted and will reisnstall and up date when I get my discs back moving house so in storage boxes somewhere ? , but who needs Windows ? is any one else suffering , or have any solutions
Hi Ken,
Wow, I've logged into adobe and never seen your response until now.
I need to make the forums more of a daily stop I guess.
Thank you for your response, When I go to the Archives, it states I have none. In addition, previously when I'd tried to move items to the archive, they just disappeared
Currently my desktop is not connecting at all, Everytime I connect, it's states "We have now logged you out" and requests I login again.
I have of course rebooted,
Gone into taskmanager, killed all the relevant threads, tried again to login through the desktop, no luck, I'll have to uninstall it, make sure the threads are killed, then reboot it and then reinstall it, but I've not had the time to do that.
On another note, and just as a point of reference, myself, personally, I hate these "cloud" file repositories (not to be confused with adobe cloud services which I love) but the file repositories themselves imho, are a blackhole of resource usage when one doesn't/isn't using them,
Is there a way we can use it more of a "ftp" sort of thing, when I want to I can put files there? There is no way to "Download" the repository, no way to download the folders.. only individual files and then it takes I think three different steps before the download starts.. I find this very inhibiting. Just an fyi. for what it's worth.
Please, feel free to contact me,
I'm on g+ chat [email protected] -
Anyone having Bluetooth syncing issues w VW Tiquan11... and iPhone4? Essentially the pairing craps out every other time when you connect to the cars bluetooth. Requires rebooting iPhone, power off/on and then connects..
Many people are finding their Iphone 4S drops connection with their VW (Passat etc) integrated bluetooth hands free system after working fine for 5, 10, 20 minutes. The only way to reconnect is to switch the car off or turn the Iphone bluetooth off & back on.
This is a dangerous fault and it appears that both Apple & VW have no solution (or are ignoring as they have already sold you a phone & a car).
iPhone 4S, iOS 5.1.1, VW bluetooth -
More Aperture/iPad syncing issues
Each time I create a new project or album in Aperture, I have trouble getting the images to the iPad when I sync. I sometimes need to sync several times until the images are recognized and imported to iPad. I do have the albums designated manually, rather than all, which means I have to sync and then sync again after I check the checkbox for the new album. I understand that, but sometimes I have to go back into Aperture to make sure the previews are updated. If I choose to update the previews for a project, Aperture will usually tell me that they're already up to date, but often they will not show up on the iPad, even after I check the appropriate box for the album in iTunes. Sometimes I get good results if I delete the previews and regenerate them in Aperture.
The second problem is the sort order. Even if I have "sort by filename" selected in Aperture, they do not show up in this order on the iPad--despite what the support article says about this. They appear to only show up in Date order. I've tried repeatedly resetting the sort order, but it does not change on the iPad. Sometimes I have to delete the album from the iPad, (uncheck the album in iTunes and sync again), then recheck it and sync yet another time. This does not always work, however.
It is very frustrating. The interface between Aperture and the iPad is very wonky. I often have to sync repeatedly, just to get the photos on the iPad and even then they're usually in the wrong order.
Aperture appears to have two types of previews: "previews" and "sharing previews," but "sharing previews" don't seem to appear in the documentation. I've noticed that, even when Aperture says the previews are up to date, when I exit the program, it will sometimes (but, maddeningly, not always), give the message, "updating sharing previews" before quitting. I cannot figure out how to force this, however. Sometimes opening and closing Aperture several times will cause it to do this, but I can't be sure.
iTunes seems to have its own process in which it "optimizes" images for importing to the iPad. Like Aperture's mysterious "sharing previews," "optimizing" does not show up in the iTunes documentation or help files.
This process either needs to be improved, or at least documented so users can understand how to avoid these problems.1. Some people have reported slow syncing with anything but the iPad's own USB cable (e.g. using a US cable from an iPhone/iPod). Try different cables
2. More work - disable iTunes syncing completely, then re-enable a bit at a time, e.g. one movie at a time, one playlist at a time, one photo album at a time. There are periodic reports of syncing issues caused by a bit of media that's been corrupted, and this (tedious) approach allows you to identify where the problem might be.
3. If that fails, do a clean restore back to factory settings, then progressively re-enable syncing as above.
Hope this helps -
Disappearing Contacts, Mobile Me Sync Issues, Calendar crash-Answers??
I'll try to keep this post brief but hopefully it will help provide some possible answers for frustrated users experiencing the random complete wipe out of all contacts and calendar data when syncing with mobile me using either push or fetch. After several weeks of experiencing these random sync issues and spending several hours over several days between tech support calls with iPhone then Mobile Me support and then finally a genius bar appointment where the genius said he didn't have a clue and simply offered to replace my phone.
The next morning, SAME PROBLEMS... and through it all NO ONE could tell me why my sync was so randomly unreliable. Every other day for no apparent reason, my phone would suddenly lose all contacts and/or calendar data. (A few thousand contacts and two years of calendar data). It was both frustrating and strange—even stranger that Apple techs had no clue why and seemed to think no one else was having this issue.
I tried everything - complete restores, resets, deleting and re-adding the mobileme account, etc., etc., etc. One tech support person finally said, "good luck..." The others kept handing me off the higher levels of support... until finally they just said "we don't know why this is happening." I was waiting for someone to just say, "Look, we have issues with mobile me, so hang in there and eventually it will work." I can be patient and I still think the iphone is the greatest invention in recent years. But everybody I talked with at Apple seemed to think this should be working flawlessly.
I also started having a crash on the calendar anytime I tried to see the list view for "all calendars." This was frustrating because that's the best feature of the calendar app!
I was prepared to just return to syncing with my computer and wait for the software to improve between the phone and mobile me. Finally, last night I tried a few things that seem to be working... and for the first full day, mobile me is actually useful to me today. (my fingers are crossed!)
Here's what I did.
1. I minimized the number of calendars I was syncing - I have no idea if this affected the sync, but I was syncing eight calendars, now I'm down to four. (You can easily export a calendar and import those events back into a different calendar.)
2. I did a complete restore of the phone (not from a back up) and the VERY FIRST THING, I added mobile me and synced only the calendar (set to push.) This cleared up the random calendar crash in list view and also mobile me was pushing data rather reliably. After a few moments my entire calendar was on the phone and worked perfectly. New events were transferred quickly back and forth.
3. I then chose to sync my contacts through the computer rather than over the air. I fear that the contact sync was somehow messing up the whole communication process between the phone and the cloud. Someone suggested that the number of "groups" in contacts might have an impact on the sync issues as well. I didn't need my contacts to sync with the urgency of "push" so this works for me. Plus I have a lot of contacts and it's just faster over the cable.
4. I then GREATLY reduced the number of apps on my phone. I originally had about 27 and I only reinstalled 9 of them. I did this ONE AT A TIME - starting with the most necessary and useful... and after each install, I checked the functionality of the calendar and mobile me. No problems. Perhaps I was having an app conflict?
5. Then I reinstalled the rest of my content - music, podcasts, photos. Still no problems.
ONE of these steps actually worked, and I'm not sure which one. My guess is that one or more of my apps was conflicting in some way. OR possibly something with the contact sync... but for the last 24 hours the mobile me calendar sync using push has been consistently reliable and useful. (for the record, mobile me email has always worked perfectly for me.)
No one with tech support ever suggested to me that I could be having an application conflict or any other problems with calendars or contact groups, etc. I've spent many hours on this the past few weeks... and for the first time, my iphone seems to be working with mobile me correctly.
In reading many of these posts, it seems a lot of others are having similar problems... so hopefully these suggestions might be helpful. If you have any thoughts as to which of these solutions was the correct one, I would be interested in hearing your opinion.
Thanks!Are your Address Book contacts and iCal calendars/calendar events on your Mac synced with your MobileMe online address book and calendar?
When you say this data is not synced with your iPhone, none of your MobileMe online data is transferred to your iPhone, or after the initial transfer of this data to your iPhone when you first turned contacts and calendars for over the air syncing with your MobileMe account on your iPhone, the data is not kept synchronized with the MobileMe "cloud"? -
How do I get rid of lip-sync issues with iTunes 10.2.2.12?
Hi Everyone.
Firstly, a very Happy Easter!
I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
The system stats for my PC are at the bottom of the post.
The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
I suppose my main questions are:
Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
Is the spec (below) of my PC causing any issues.
Here's an Easter Egg for anyone able to help!!
All the best
BandAidUK.
System Information
Time of this report: 4/24/2011, 10:13:44
Machine name: DEREK
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension 8300
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 3326MB RAM
Page File: 1273MB used, 3941MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
Display Devices
Card name: NVIDIA GeForce 6200
Manufacturer: NVIDIA
Chip type: GeForce 6200
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
Display Memory: 512.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0012.6099 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0221
SubSys ID: 0x02F3196E
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
Description: Creative SB Live! Series
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Other Files:
Driver Provider: Creative Technology Ltd.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Description: SoundMAX Digital Audio
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
Manufacturer ID: 65535
Product ID: 65535
Type: WDM
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Other Files:
Driver Provider: Analog Devices
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 100, 192000
Static/Strm HW Mix Bufs: 33, 32
Static/Strm HW 3D Bufs: 33, 32
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): Yes
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: Creative SB Live! Series
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
Description: Hauppauge WinTV 88x Audio Capture
Default Sound Capture: No
Default Voice Capture: No
Driver Name: hcw88aud.sys
Driver Version: 2.125.28070.0000 (English)
Driver Attributes: Final Retail
Date and Size: 3/12/2010 09:47:58, 13440 bytes
Cap Flags: 0x41
Format Flags: 0xCC0
Description: SoundMAX Digital Audio
Default Sound Capture: No
Default Voice Capture: No
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Cap Flags: 0x41
Format Flags: 0xCCC
DirectMusic
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
Registry: OK
Test Result: Not runSelect *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
In List view, you can turn off every column (in menu View > View options) except track name. -
I think I solved my time changing issues- hope this helps
Hey everyone, I think I've had some success with my time changing issues. I originally posted this to another user as a follow up to her question, but I'm reposting it here. Hope it helps:
"msteinny,
So i went to the apple store to meet with an apple genius to ask him why my phone's time kept moving up 1 hour everytime I synced my phone. Well he said that he's never seen this problem before, and after a trying a reset and restore he let me exchange my phone. The problem is that when I went to sync my new phone the problem still persisted. They told me it was probably something to do with my computer and its time zone settings.
So I get home and click on my computers clock in the bottom right hand corner to bring up the date and time properties and sure enought my time is correct, the date is correct and the time zone is correct (Eastern Daylight Time). So I look through the different tabs (Date & Time, Time Zone, Internet Time). The first thing I tried to do was to change where my computer syncs its internet time. It was originaly set on NIST time. I then switched it to Windows time, but this didn't do anything. My clock would still change when I synced to itunes. The next thing I tried was fideling around in the Time Zone tabs. I noticed that the box that says "Automatically adjust clock for daylight savings" was unchecked, so I checked it and my computer's time jumped an hour ahead. So I left the box checked but moved my clock one hour back (to the correct time), clicked on apply and left it at that. I synced my iPhone and voila! The time didn't change! It stayed on the correct time! To to make a long story short, make sure that you computer's clock is set on "automatically adjust clock for daylight savings changes, make sure your time zone is correct, and that the time is right when that box is checked. I hope this helps you. I'm glad I got a new phone out of the deal;)
Chris P. "As I mentioned in my post, whenever I checked that box the time would be incorrect. It would move up an hour. I've messed with this along time ago, way before I got my iphone. I think this had something to do with the daylight savings change that was implemented this year or last year. I dont remember if I never tried correcting it before, or if I couldn't, but this time I didn't have any problems correcting it. Anyway, since I couldn't correct it back then, I just left the box uncheck and decided that I would change the time manually when the next time change occurs. But it seems to work fine now so all is well.
-
As title,
I have a domain with 2 DCs (both virtual machines) in 2 different Hyper-V Hosts, and one of the perform as a PDC Emulator.
Dose this case make any influence on the time sync?
i.e. Both of the VMs sync with Hyper-V host, instead the other host should sync with the PDC Emulator?
I run w32tm command and get the following result:
C:\Users\Administrator.DOMAIN8>w32tm /query /computer:dc8.domain8.local /source
VM IC Time Synchronization Provider
C:\Users\Administrator.DOMAIN8>w32tm /query /computer:hpvzh05.domain8.local /source
VM IC Time Synchronization Provider
HPVZH05.domain8.local works as PDC server.
How can I make DC8 sync with HPVZH05?Awesome!
It looks like your PDC is successfully pulling time from an external source. DC8 is not longer pulling from Hyper-V so that is good.
When you set a client to pull from a source ( and in this case DC8 is pulling from NT5DS, which tells it to pull from the PDC), and it CAN'T pull from that source, it will default to Local CMOS Clock. This is likely an easy fix.
First, check connectivity:
- Method one- Download Portqry and run this command: portqry -n HPVZH05 -p both -e 123 and see if the results say listening, or
- Method two- Run this command from DC8: w32tm /stripchart /computer:HPVZH05
If you get any kind of error using method two, it's a connectivity issue. (Maybe you have a firewall that's blocking access?)
The other cause of this, and probably more likely in your case, is that your PDC isn't properly advertising as a reliable time source, so DC8 isn't 'allowed' to pull from it.
Try running this command on your PDC: w32tm /config /reliable:yes
Then go restart time on your PDC, THEN DC8 again. (net stop w32time & net start w32time)
Here's an article you can reference: http://technet.microsoft.com/en-us/library/cc794937(v=WS.10).aspx
- As always, if you find my posts to be helpful, please mark it appropriately. Thank you :)
Chris Ream -
ICal refuses to finish 'restore' ; trying to resolve sync issues.
trying to fix sync issues.
using missing sync.
everything worked perfectly for a ling long time before i thought it'd be cute to go in and put birthdays into addressbook, and select the option in iCal preferences to add those events to my calendar.
EVERYTHING has gone to **** since then.
the missing sync guys recommend i backup and restore addressbook and iCal.
addressbook did fine.
when i select the saved ICal database file (icbu) from my desktop, it will not complete.
what gives?
i'm trying to do this to fix another problem.
its like every step is making a new issue.
i am getting close to the edge guys...
pleaes help.
thanks!
c
(overall problem is that i cannot even get missing sync to overwrite my blackberry 8830 now.
for months, iCal, Addressbook, and Tasks synced perfectly.
all was well until i screwed with this stupid Birthday feature.)
Message was edited by: clyde calso, i've already gone into iSync and cleared sync history....that didnt seem to affect anything.
thanks in advance for any insights at all.
c
Maybe you are looking for
-
Error while calling Computation process
Hello Every Body I have a form for inserting informations . after the click on my submit button I redirect to another page on this page I have a textbox item called "P2_CODE_USER" In my first page i added a computation process that set in P2_CODE_USE
-
I upgraded my Firefox today(feb 29) at lunch and now firefox won't even launch!!?? help please!
I have a huawei ideos s7 and installed Firefox in December. Upgraded Firefox in January(I think) and it worked fine! Today I upgraded it again and now Firefox launches but immediately closes down.
-
I recently bought a LACIE d2 USB3 Thunderbolt. When the LACIE icon appears and I try to set it up, I see this message: " LaCie Setup Assistant is only compatible with USB and FireWire ports." But, I do have USB and FireWire ports. What should I do?
-
Why is the 3d tab not showing on the top ribbon?
I just started a close for photoshop and they have on their top ribbon "3d" tab why does it not show on mine?
-
I know that it is not allowed programmatically but what is syntex of the command to set max jvm. Which class name muste given in the command. I tried : java -Xmx128m if I write just like that, a screen shows as I write -help. Thank you