Magic block issue...

apologies, temporarily using an ancient pc notebook due to macbook crash and burn
tried search (magic block) and it said there were 4 matching but none show onscreen
can't raise anything on my macbook pro (flashing file with ?)...stone dead
diagnostics suggest that there is a long piece of code missing or inaccessible in "magic block"
is there a way to retrieve data from fried harddrive, or some other known work-around (the issue is apparently known to some)
went to my "gurus" but they obviously are not hip to this particular issue at least
went to authorized service center
they say they can replace harddrive but need my old one in exchange...what's up with that
does folks just send bad harddrives back to apple with personal and sensitive data on it???
your thoughts???
this issue is apparently addressed in some form (whether what i need or not) already on this forum; if you would rather just provide me links to those pages, i'll see if they address my needs (i just can't get the search to display those links on this piece of pc junk)
still under hardware warranty, but no apple care pkg
many thanks in advance,
micbojangles

sorry, a misedit shows "does folks..." rather than "do folks..."
my bad

Similar Messages

  • Magic Mouse issues after updating to iTunes 11

    Hi,
    Just updated to iTunes 11, and immediately after installing I have been losing Bluetooth connection to my Magic Mouse.  This usually happens when I click on an icon in my dock to launch an App.  Specifically, most often when I am launching iTunes.  I've ruled out a battery issue, as I've replaced them and it doesn't make a difference.  I've even cleared my PRAM at startup (CMD+OPT+P+R at startup), since I saw this suggested for similar Magic Mouse issues not related to iTunes. Resetting the ram made no difference in my case.
    I've had the Magic Mouse for 2+ years, and this has never been an issue before.  In fact, I've never had any connection issues with the mouse that weren't related to weak batteries, and everything was working great until I installed iTunes 11.  Just wondering if others have had this issue since upgrading to iTunes 11, and if so, how it was corrected?
    Thanks.

    Hi, I've not had this issue, but iTunes 11 does seem to be doing something to my Magic Mouse. For example within iTunes 11 I can no longer swipe forwards and backwards. Not sure if there is some kind of hitch with the new iTunes software and the Magic Mouse firmware?

  • Is apple going to fix the magic trackpad issue with Autocad zoom/pan soon? It only started happening when I updated to Yosemite

    is apple going to fix the magic trackpad issue with Autocad zoom/pan soon?
    It only started happening when I updated to Yosemite
    I am using macbook pro 15" Retina

    Although it not only bothers me but alot of other photo booth users aswell

  • Delivery block issue

    HI ,SD GURUS
    Issue is , once created a sale order and delivery ,so between created sale order and delivery , price may be revised by the customer. Delivery control deapartment  they dont have awareness about price revision..i maintained the condition record fro the materials.
    my requirement is i need block the delivery due to price changes from the condition record.
    pls help me
    with regards
    dinesh

    Hi,
    One point came to my mind is, the prices in sales order are agreed upon prices with the customer. Now even if you change the prices later, the prices agreed upaon still holds good.. right..
    Before changing anything always take into consideration the business perspective also.
    So in this case my suggestion would be to have delivery blocks in sales order. Before the users create delivery, check the prices and then release the block.
    Or
    If you are gonna use the latest prices then do as Madhu suggested.
    Let us know.
    SB

  • Premiere CC 2014 - Magic Mouse issues?

    I know most professionals might prefer not using Apple's Magic Mouse for professional applications, but I happen to kind-of like the mouse.
    However, since using the latest version of Premiere CC 2014, I've noticed some very erratic behavior with the Magic Mouse. Click-dragging to move clips on my timeline doesn't always work. Sensitivity is delayed in zooming in on the timeline. Scrolling lags. Etc. etc.
    Anyone else have any issues using the Magic Mouse? All my other non-Adobe applications seem to be working fine with this mouse, though I have notice some similar sensitivity issues with the mouse in Illustrator and InDesign.
    I'm hoping there will just be a bug fix or something, as I've been having to resort to using a wired mouse, which is a clunky fix.

    EXACT SAME THING HERE  Can't find answer !!
    drag and drop clip is ssssooooooooooooo frustrating !!
    I have to use a usb mouse for premiere and magic mouse for e-mail and other stuff...
    unacceptable !
    I discovered that what makes it not to work is simply the horizontal scroll of the "middle button". if you click, start draging a clip and your finger move of half of 1mm, then it just end the move there... same for rectangle selection !
    hate that !
    I'm getting pain in the arm because I switch mouse all the time and they are obviously not the same speed and this change my work flow and lot of stuff ! This is a tiny problem causing huge problem !!

  • Agent mapping & credit block Issue

    hi friends ,
    Client Issue : inter linking issue
    1) Agent should assign to partner function(sold to party ) & should trigger the agent commission automatically in pricing procedure which should not include in basic price .
    2)  If one customer is not settled the amount then automatically block other customers of agent .Means agent is responsible for payments .  In credit management credit block is for payer .  Here the case is how to block the agent in credit management .

    Hi,
    The control is in the TOR configurations.
    Go to OVZ7, in 01 (Credit limit) , select Confirmation block .
    This is used to block the reservation of the TOR from MRP.
    Regards
    M. Lakshmi Narasimhan

  • Web Template Nav Block issue with a characteristic

    Hi folks,
    We have an issue with one of our web templates. In one of the navigation blocks there are some characteristics, for example, some are like as below.
    G/L Account
    Asset
    Cost Center
    Order
    Network
    WBS Element
    Cost Center (Accoung string -correct object)
    Sales document
    The second object from bottom supposed to show as 'Account String' since the char is accounting string itself, insted, it is showing as Cost Center which is not correct.
    The web template has 'personalization' checked.  It is based on a BEx query.
    This issue is happening with one user id. For other users (using their logon credentials), it is showing correctly.
    I really appreciate any inputs.
    Thanks.
    G.

    Suman,
    The parameter ID column is blank for this user.
    However, the same query displays same for other users.
    By the way, we are on BW 3.5 now.
    Thanks for your input.
    RK

  • Bluetooth Magic Trackpad issues

    Hi All,
    I tried to find similar question in discussions, but I couldn’t.
    After upgrade to OSX Mavericks I have big problem with my magic trackpad connected via Bluetooth. When I start using OSX everything is ok, but after 5-10 minutes I see how trackpad somehow is losing the connection or pointer on the screen is moving with some “jumping” moves. It’s annoying and it happens only with trackpad - when I connect Logitech mouse connected with USB dongle, everything is fine. Sometimes I see that trackpad lose connection at all.
    System was upgrade into Mavericks from ML - previously I had SL. I have no idea how this issue can be fixed. Perhaps I can reinstall entire system from clear installation, but I won’t do this.
    Any help will be appreciated.
    Regards,
    Marek

    Hello Kelmex
    Start with the article below to troubleshooting the connectivity of your Magic Trackpad. Look for any interference that could be cause it to act erratic as well as battery life on the Magic Trackpad.
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    Regards,
    -Norm G.

  • IMac/Magic Mouse issue with multiple iMacs.

    I bought two new imacs last month with wireless Magic Mice.  The mice one both of them keep having communication issues.  I returned them to the genius bar and they replaced them.  I'm still having the issue.  I keep having to reset the SMC for them to work, but they only work temporarily.  I've also tried zapping the PRAMs  Any suggestions?

    Do a search of this forum, Just look down this page for two or three other posts with the same theme. Many folks report the issue. Many folks report different ways of solving it for themselves.
    I have had the MM for three weeks now without one issue. I am even experimenting with BetterTouchTool for added utility of my MM.
    Dah•veed
    PS - The Provost of St Mary's Cathedral on Great Western Road is an online friend of mine!

  • Mac Pro Magic Mouse issue 2013

    I'm starting this thread to try to get some current information on what seems to be a long time problem. My church media dept upgraded to a Mac Pro from a 2006 G5 two weeks ago and out of the box the magic mouse is jumpy, lags and disconnects. I thought the mouse was an issue so I brought a blue tooth mighty mouse from home to get by. It acted the same way. The only conclusion could be the bluetooth function of the Mac Pro.
    I did my homework and found evidence of this problem all the way back to 2009. Gotta say I'm disappointed in Apple to have an issue unresolved this long. I'm quite the mac evangelist and this is hard to defend. I have read all kinds of solutions from rewiring the antenaes, installing external antenaes, USB plugins, etc. Most of these solutions are quite dated so I was wondering what the 2013 fix is for this issue. Preferably without having to buy something else after spending 3500 dollars on a machine that should just work!
    I have a magic mouse at home on a mini and we have a mini at the church that we bought at the same time as the Mac Pro and the magic mouse works on that. So clearly this is isolated to the Mac Pro.

    yep-you're right. However, Apple does NOT read this community forum, Ever. So, posting complaints about Apple here will do you no good. That being said.... there is no
    "2013" solution, as the Mac Pro may not be Apple's current priority. I use a usb to BT adapter from Iogear which seems to work fine (it's the 421, the 521 will work with Moutain Lion only). I also bought a MS mouse because my wired mighty mouse bit the dust. I think I paid $40 for it. It came with its own adapter. It's an Explorer touch mouse if that helps. It also came with its own dongle, plugged into the usb port.  It has worked fine.
    Those are the  known "solutions" : check to see if the Mac pro has an airport card, and where the BT antenna is plugged in, maybe try an external antenna (the G5 used to have one, I know) or a USB dongle. I've heard that removing the battery cover on the mouse helps. Why? I don't know
    JB

  • RESOLVED: "This driver is blocked-" issue on Windows Vista

    Hi.  I have a ThinkPad T60, originally an XP machine that came pre-installed with Roxio RecordNow.  Recently, I upgraded it to Windows Vista. Unfortunately, I did not find the information about needing to uninstall this product *before* upgrading my system to Vista until it was too late – and I know from my search for a solution, I am not the only one
    In my/our defense, the Microsoft Vista Upgrade Advisor found the potential problem before I did the upgrade but the message simply said something like “Caution.  You may have to obtain a Vista-compatible update for…” from Roxio.  This was true for drivers and sw from Lenovo too.  And, after upgrading I easily updated my ThinkPad drivers and applications by downloading the updated components from the Lenovo site.  
    But even after *purchasing* an upgrade to a newer version of Roxio's software – which their support people claimed would a) be compatible with Vista (it is) and b) fix my problem (it did not) – I cannot get rid of this issue...  
    Program Compatibility Assistant
    This driver is blocked due to compatibility issues... 
    Driver: Sonic Solutions DLA...
    Publisher: Sonic Solutions
    Location: Not Available
    A driver is installed that causes stability problems with your system…
    This error message comes up (and cannot be closed) every time I restart my PC.
    Long story short, the Microsoft and Lenovo sites (rightfully) point the finger at Roxio, but they have been of no help to me...  After having me try numerous, time-consuming things that they thought "this may work" (for example, see http://kb.roxio.com/content/kb/Creator/000127CR and http://kb.roxio.com/content/kb/Creator/000131CR their ultimate answer is “reformat your hard disk and start over with a new/clean Vista install…”
    I cannot accept this answer.  There is way too much sw on my machine, purchased and installed over the last 1.5 years and all of which gracefully (more or less) went through this upgrade with me, for me to “start all over”!!!
    I have been unable to find a solution to this problem amongst all the chatter on the net although I have found clues and I feel I may be getting close.  And so now, finally, my question...
    I now know the related software and offending driver is found in C:\SWTOOLS\APPS\MMCfTO which is where Lenovo originally installed with sw on my hard drive.  To solve my problem, can I simply delete this folder *and* find/remove the corresponding Registry keys???
    Thanks in advance to anyone here who can help me.
                -dave (Lenovo T60/Type 2623-KEU/Widows Vista updated/current)
    Message Edited by srda310 on 04-05-2008 02:01 PM
    Solved!
    Go to Solution.

    For posterity...   I was able to resolve this issue by using some tips and tricks not specifically related to my issue, but allowed me to get to a solution nonetheless.
    1) The following article was NOT written for/about Vista, so you cannot run the "REG ADD" command it suggests.  However,  you can use REGEDIT to make the suggested addition to the Registry by hand.
            see  http://mcpmag.com/columns/article.asp?editorialsid=990
    2) This change allows you to run the Control Panel / Program Uninstall in Safe Mode and then you can Uninstall the Sonic Solutions DLA software.
    Yay!
    Message Edited by srda310 on 04-04-2008 07:57 AM

  • Query Data Block issues

    We have a legacy Forms and Reports application(~750 items combined). I suspect the applications were developed initially under 6i, but they work quite well under 10GR2, and is testing well under 11GR2 (which we plan on migrating to soon). We ran into an issue the other day for Data Query Blocks, and wanted your expert opinion on it.
    Due to a change in business requirements, we recently had to increase the length of a database field (from 20 to 30). We went into Forms Developer, made the appropriate changes, and recompiled them all successfully. Everything *seems* to work fine, but we noticed we get failures on any item that tries to utilize that extra 10 characters. Apparently this is because the Query Data Block seems to use a cached/stale copy of the database field sizes, and still expects a size of 20! What we realized now is that we have to go into each of those forms, and REFRESH the Data Block (through the Data Block Wizard) for every one of them.
    My question is this: is there anyway to force the Form to refresh those Query Data Blocks absent going into each one and REFRESHING it? We've tried compiling through Forms Developer, and through Batch Compiles, and nothing seems to get those cached copies to update. I'd really prefer to tackle this issue once and for all since we are prepping for migration testing.  Frankly I suspect the table space was tweaked a good bit over the years since development (before I ever got here), and if they didn't REFRESH those Data Blocks properly, a great many of the Forms will be suffering this same cached/stale view problem.
    Appreciate your thoughts,
    Dave

    Q_Stephenson,
    That's an excellent suggestion.  I have seen vague hints and allegations of Forms manipulation using that method, but never felt comfortable with my overall knowledge(*) of Forms to look at it that deep.  I think it's time to clear some space and dig into the topic for a better look.
    Thank you,
    Dave
    (*) The majority of my programming background is in Java; it's only been recently that I've had to really dig deep into Forms.

  • Customer Delivery Block Issue

    Hi Experts,
    I am facing a strange problem while changing a sales order, information message customer xxxx-xxxx has delivery block.
    However I have checked carefully in VD05 that there are no block maintained for order, delivery or billing.
    Our finance person activated customer delivery block two weeks before for particular customer xxxx-xxxx and now removed customer delivery block, but when we goto change the sales order still showing message and delivery also can't create
    How to solve this issue?
    Plz help!!!!!
    Regards
    Sankaran

    Hi,
    Initially,even if there are blocks at the customer levels,those blocks will not be assigned at the sales order.
    Suppose,we have a billing block at the custoemr level.While creating the invoice,it will throw an error message that "Customer is having billing block".
    If you remove this block there in T.Code "XD05",then you can proceed.
    Could you pls check in XD05/VD05 for your sales area and company code,whether the block is still there are not.
    If the delivery block is present at the order level,we have to remove that block eitehr manually or by using workflow functionality if needed.
    For removing the block at the order level,we have to got for "MASS" T.Code for bulk removal.
    Regards,
    Krishna.

  • Credit block issue

    Hi ALL,
    Issues is like that..
    On 10.08.2010 order 9999 was released and was partially shipped. On 08.08.2010 riskcategory for customer was changed to 007 and on 22.09.2010 creditlimit was reduced to 50.000. Despite the creditlimit change to 50K (with outstanding of 48K) and the change of riskcategory apparantly it was still possible a new delivery was created and new invoice was raised 90190988, dated 05.10.2010 for 22.881,60 althrough all new deliveries had to be made on cash in advance basis. Can you tell me how it was possible that new delivery was not blocked even though creditlimit was exceeded and riskcategory should block new delivery. Please let me know how to prevent this? What could be a posiibilities ..Thanks

    Hi pawan,
    as indicated by Kapil. the existing documents will not get affected because of change in the risk category as the same would have been appearing as the information while the change was made at the FD32 screen.
    all the credit related informations are updated in the S066 & S067 infostructures & this info structures holds the information on the documents specific to the customer/ document, you will not be able to see the risk category for an order as these are saved on the internal tables, you can try it out unders s066 & s067 possibly.
    so when the correction program is run this informations are overwritten based on the latest master data, these programs are time consuming in Production environment & may require a minimal  transaction volume while the program is run.
    regards
    ilango

  • Magic Mouse Issue

    Hello, I've recently installed Snow Leopard, and encountered the dreaded problem of the magic mouse. It will not scroll and be properly detected as a bluetooth mouse on my system.
    I've tried everything in this topic : http://discussions.info.apple.com/thread.jspa?threadID=2383403
    At one point it was working properly then I got this message on startup:
    *System Extension Cannot be used*
    +The system externsion "/System/Library/Extensions/AppleBluetoothMultitouch.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update"+
    Now, I'm stuck with a two button mouse. Does anyone have this kext file ? Or a possible fix to solve this annoying issue ? I would be forever grateful.

    I´m having a similar thing, no error message, though.
    The mouse does not do any scrolling etc, only left + right click.
    Can´t install the "WirelessMouseSoftware", the installer says there´s a later version of this software already installed...

Maybe you are looking for