Magic mouse, Win XP all work fine? On boot camp?

I currently have an Intel iMac 2007 Core 2 Duo with Snow Leopard on and use boot cMp with Win XP home on. I have a mighty mouse wireless at the moment and works fine. I used a magic mouse in the Apple retail store recently Nd thought it was reall good.
So will the magic mouse work fine under boot camp on Win XP home? What functions work and what dont please? I only want one mouse for Mac and Windows
Cheers

The Magic Mouse will work fine with Bootcamp Windows and Mac OS X. Follow the instructions: un-pair it in Mac OS X, install the drivers and pair it in Bootcamp Windows, and then pair it with Mac OS X. This works great for me, but note that functionality in Windows is more limited: scrolling is just up and down and no gestures for back page and forward page.
My experience with the Magic TrackPad is that I can get it to work properly in either Max OS X (10.6.4 or 10.6.5) and Bootcamp Windows. (It has the same limits on functionality in Bootcamp Windows as the Magic Mouse.) However, when rebooting into a different OS, the prior pairing does not work. You have to delete the device in the Bluetooth control panel and then re-pair it. This is a nuisance and I find that it is easier to simply plug in a USB mouse for occasional use in Bootcamp Windows rather than to constantly re-install the device. This is not fixed in the 10.6.5 update on my system.
If you need to use Bootcamp frequently, then the Magic Mouse is a better choice. Note that what I describe here is my experience with my early 2008 MacBook Pro. YMMV.

Similar Messages

  • Magic Mouse will not scroll in Windows 7 boot camp, but works fine in Mac OS

    I have a Magic Mouse that was working fine it would scroll and everything, then one day it just randomly stopped working in my Windows 7 bootcamp partiontion. I went to the Mac OS to see if there was anything wrong with the mouse, but it works fine in the Mac OS. I already made sure to install all available software updates but that doesnt seem to have helped. Any help would be appreciated.
    Thank you

    My wireless mouse is not recognized by Bootcamp bluetooth.
    Have you been able to solve your mouse issue?

  • Magic Mouse won't stay paired with booth Boot Camp and Windows 7

    So I have a Broadcom Bluetooth 2.1 dongle on Mac Pro 1,1, Lion, Boot Camp 3.3 and Windows 7 latest service pack and latest drivers/operating system. Everything is up-to-date.
    My problem started with Windows 7 not wanting to pair with mini alluminum keybord AND magic mouse. I followed a post somewhere and I was able to get the keyboard to pair and work when I switch between Lion and Bootcamp Windows 7 by removing it from Bluetooth Prefs in Lion, adding it to Windows 7 BC, and then adding it again in Lion.
    However, magic mouse will still work with onlly one: If I add it to Windows 7 and then restart to Lion, add it there and then restart in Windows, it shows as paired in Windows but it does not respond. I then remove it from Windows 7 and add it again, and it works. Then I reboot in Lion. It is on the list, but not connected. Even the option to connect is not available. I try restarting the mouse, no luck. The only way I can get it to work in Lion again, is to remove it and add it again. Now, I go back to Windows 7, It is there on the list, but it does not respond. In short, the Magic Mouse only seems to want to stay paired (or work) with either Win 7 or Lion. Getting it to work with one cancels the other.
    BTW, every time I pair it with Lion, I set it as a Favorite.
    Any suggestions?

    Some more info I have gleaned from my 13" white Core 2 Duo Macbook (not sure what generation - came with Tiger though). If I uninstall the Intel graphics drivers, the Sleep option is gone from Windows 7 but it will hibernate, and when resuming from hibernation the screen comes back on. However, when the Intel drivers are reinstalled the "screen off" problem is present for both hybernate and sleep. Two other data points: the power manager can't turn off the screen (after X minutes, etc) and I can't get any picture on an external monitor either. Just wanted to share.

  • No video on projector in OS X, works fine in Boot Camp

    Had to help a person today with a MacBook Pro (2.16Ghz. OS X 10.5) who could not make the laptop work with a projector using an Apple DVI to VGA adapter. The MacBook Pro didn't not recognize the projector and the projector could not recognize the laptop, no signal no video. Boot the same laptop in to Windows via Boot Camp, and the laptop and projector work great. Reboot back in to OS X, and it ceases to function. ??? Any ideas ???
    Thanks! :^)

    Yes and there is no change from the laptop or projector. Tried booting up with the projector on and connected and also connecting the projector after boot, and no change in behavior either way.
    Thanks!

  • I just upgraded to Yosemite, but now I can't get beyond the login screen on startup without using a usb mouse. After that my blutooth keyboard, magic mouse and trackpad all work okay.

    In Yosemite, can't login without usb mouse.

    Hello jimpetty,
    After reviewing your post, I have located an article that can help with Bluetooth connections. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing.
    Bluetooth Quick Assist
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Magic mouse and trackpad not working

    All of a sudden my magic mouse and trackpad stopped working.
    I tried everything, preferences, bluetooth config, but nothing works.
    Sometimes in the mouse prefpane, I get the message that the mouse is connected, then after a few seconds  it shows disconnected.
    In Bluetooth config I get the message that the mouse is connected but the wheel keeps spinning and then it says "connection failed. software configuration and bluetooth may be invalid or are not supported".
    Same for the trackpad.
    My second mac is also seen, and "connected ?" , but when I try to open the connection it fails also.
    System is lion 10.7.5. imac 3,6 Ghz corei5 from 2011.

    Found out myself how to solve the problem.
    Simply resetting the PRAM and everything was ok.
    Thanks anyway

  • My magic mouse keeps jumping all over the page

    Hi, my magic mouse keeps jumping all over the page and random apps keep appearing on my screen when I'm in facebook and it keeps sliding onto my dashboard screen.

    Thanks so much for replying Barry.  Did what you said but took me 6 attempts to be able to reply to you so unfortunately did not work.  Have to wait over a week to get into Apple store so I guess I've just got to wait.  This is my second magic mouse and its driving me crazy.  Touch pad also playing up but thanks for the advice and have a good day.
    Megs

  • Does magic mouse track pad functions work with OSX10.5.8?

    Does the Magic Mouse track pad function work with OSX 10.5.8? Or do I need updated software to use all of the functions?

    The Magic Mouse system requirements:
    Mac OS X v10.5.8 or later with Wireless Mouse Software Update 1.0* or Mac OS X v10.6.1 or later with Wireless Mouse Software Update 1.0
    The Magic Trackpad requires 10.6.4 or later.

  • I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

  • HT1311 Have changed my Apple id to a new email address. its all working fine on my pc and also comes up with the new id on my icloud page on my iphone, but when i tryto buy something from i tunes on the phone the sign in box still has the old id. how do i

    Have changed my apple Id to a new email address. its all working fine on my PC and also on come up with the new ID on my  icloud page on my iphone but when i try to buy something from itunes etc on my phone, the log in box still contains the old id.
    how do i change this?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    It doesn't sound like you "changed" your Apple ID, sounds like you created a new one. Bad idea. All content bought with an Apple ID is forever tied to that ID. The ID that bought the content is the only ID that can update the content. Apple does not merge IDs not does Apple transfer content from one ID to another.

  • I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.

  • HT4600 i Get a solid amber light sometimes, bUT all works fine. I have to unplug the airport extreme to reset it and then it turns green and starys that way for a week or so and then turns back to amber. why is this and how do i fix it ?

    I gat a solid amber light once a week on my airport extreme, but all works fine. I have to unplug it to reset it and then the light turns back to green and it is good for another week and then it happens again. why is this and what can i do to fix it ?

    Solid amber on an AirPort Extreme is an indication that the internal power supply is starting to act up.
    If the AirPort Extreme is in warranty, it shouid be exchanged for another AirPort Extreme.
    If the AirPort Extreme is several years old, keep any eye on things. When/if you find that you are having to reset the device several times a week, it's time to start thinking about a replacement device, as the end is near.

  • My pages documents on my ipad wont sync to icloud. Some documents have had the upload icon on them for over a month. It was all working fine but now I cant figure out what is going on.

    MY pages documents on my ipad wont sync to icloud. Some of the documents have had the upload icon on them for over a month. It was all working fine a month or so ago but I cant figure out why it wont work now.

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

  • Speakerphone problem - lost voice from speakerphone while playing music or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes

    or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes.
    iphone 4
    SOLVED plugin to charger solved it - so problem was with contacts -- no idea why - phone is new - no water - no havy dust - usual using  
    hope will never return. Thanks

    We checked it with an iPhone 5 in house multiple times and could not reproduce this Problem. Must be something specific to your device. Maybe your speakerphone volume is turned down completely?
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scann

    Hi!
    After Windows update in april 2014 I cant any longer use the scanning funktion via network from Canon MF8330 Cdn multifunktion printer/fax/scanner machine! It worked fine Before the april Windows update installation.
    I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scanner installation ends, then system report that it cannot install the scanner and I have to try installing again. I have done that now several times but it helps not. I Think it has something to do with that the Canon scanner drivers isn´t 64 bit files, or the problem is that windows update has replaces saome dll file to a never version that not work with Canon drivers. 
    I have seen that there is a service pack 1 from Canon för Windows 8 and 8,1, can I use that service pack to get a never dll file for scanner or work this only for windows 8 version.
    Have someone a solution to this! I have contacted the Canon support already and they say that its a Microsoft problem!
    Very thanful for help in this case!
    Greetings
    Sixten
    Hi!
    I am installing the drivers from Canons site. It is the newest version 2005b for Windows 7 64 bit to MF8330Cdn Canon multifunction printer/fax/scanner. Installation goes well for the printer and fax but not for scanner drivers. The error message is Could not install the scanner. In device manager is there then a unknown device under Image devices. In Device Manager I try to update drivers, but it does not help either, error message is access denied. I am logged on the system with administrator account, therfore it is strange that I get the error message access denied.
    I tried earlier to do system restore back to previous time, but it did not work, error was that the system could not do the system restore because of access rights.
    is there anything else I could do.
    Here is the MF36SCN.inf file for scanner installation from Canon, if it can help You to go further with the problem. Is there something strange in the inf file that does not work in Windows 7 64 bit Windows, something shows that ther is also same 32 bits parts in the inf file.
    Greetings
    Sixten
    ; MF36SCN.INF  -- Windows Setup File for the MF8300 Series (Windows XP,Vista(64-bit))
    ; Copyright CANON INC. 2009 All Rights Reserved
    ; InfID: {BA7E017E-FA42-4831-A084-AA9E671325EE}
    ; Last Modified: 11-Jun-2009
    [Version]
    Signature="$Windows NT$"
    class="Image"
    ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
    ;  The above GUID is the class GUID for all scanners and MUST NOT change
    Provider=%Msft%
    CatalogFile.NTamd64=MF36SCN.CAT
    DriverVer=06/17/2009, 11.3.0.0
    [DestinationDirs]
    DefaultDestDir=11
    CNCDsFiles=10,"twain_32\"%CNCRFN%
    CNCMediaFiles=10,media
    ColorFiles.NT=11,spool\drivers\Color
    [ControlFlags]
    ;ExcludeFromSelect=*
    [Manufacturer]
    %Mfg%=Models,NTamd64.5.1,NTamd64.6.0
    [Models.NTamd64.5.1]
    %LPTENUM\CNC.DeviceDesc%=CNCInstall_XP,USB\VID_04A9&PID_2708&MI_00
    %LPTENUM\CNC.DeviceDesc%=CNCInstallNet_XP,CANON_MFNP&%CNCRFN%
    [Models.NTamd64.6.0]
    %LPTENUM\CNC.DeviceDesc%=CNCInstall_VISTA,USB\VID_04A9&PID_2708&MI_00
    %LPTENUM\CNC.DeviceDesc%=CNCInstallNet_VISTA,CANON_MFNP&%CNCRFN%
    ;........................................ WinXP(64-bit) section
    [CNCInstall_XP.NTamd64]
    Include=sti.inf
    Needs=STI.USBSection
    SubClass=StillImage
    DeviceType=1
    DeviceSubType=0x1
    DeviceData=CNCDeviceData
    AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP
    CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
    ICMProfiles="sRGB Color Space Profile.icm"
    ; used for push button event
    Capabilities=0x11
    Events=PushButton.Events
    DriverVer=06/17/2009, 11.3.0.0
    FriendlyName=%CNC.FriendlyName%
    [CNCInstall_XP.NTamd64.Services]
    Include=sti.inf
    Needs=STI.USBSection.Services
    [CNCInstall_XP.NTamd64.CoInstallers]
    CopyFiles = ScanCoInstaller_CopyFiles_x64
    AddReg    = ScanCoInstaller_AddReg_x64
    [ScanCoInstaller_CopyFiles_x64]
    CNCLSO36b.dll
    [ScanCoInstaller_AddReg_x64]
    HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
    ;........................................ WinVista(64-bit) section
    [CNCInstall_VISTA.NTamd64]
    Include=sti.inf
    Needs=STI.USBSection
    SubClass=StillImage
    DeviceType=1
    DeviceSubType=0x1
    DeviceData=CNCDeviceData_VISTA
    AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
    CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
    ICMProfiles="sRGB Color Space Profile.icm"
    ; used for push button event
    Capabilities=0x11
    Events=PushButton.Events
    DriverVer=06/17/2009, 11.3.0.0
    FriendlyName=%CNC.FriendlyName%
    [CNCInstall_VISTA.NTamd64.Services]
    Include=sti.inf
    Needs=STI.USBSection.Services
    [CNCInstall_VISTA.NTamd64.CoInstallers]
    CopyFiles = ScanCoInstaller_CopyFiles_x64
    AddReg    = ScanCoInstaller_AddReg_x64
    [ScanCoInstaller_CopyFiles_x64]
    CNCLSO36b.dll
    [ScanCoInstaller_AddReg_x64]
    HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
    ;........................................ WinXP(64-bit) section(Network)
    [CNCInstallNet_XP.NTamd64]
    Include=sti.inf
    Needs=STI.SerialSection
    SubClass=StillImage
    DeviceType=1
    DeviceSubType=0x1
    DeviceData=CNCDeviceData
    AddReg=CNCAddreg,CNCUSDAddreg_XP
    CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
    ICMProfiles="sRGB Color Space Profile.icm"
    ; used for push button event
    Capabilities=0x11
    Events=PushButton.Events
    DriverVer=06/17/2009, 11.3.0.0
    FriendlyName=%CNC.FriendlyName%
    [CNCInstallNet_XP.NTamd64.Services]
    Include=sti.inf
    Needs=STI.SerialSection.Services
    [CNCInstallNet_XP.NTamd64.CoInstallers]
    CopyFiles = ScanCoInstaller_CopyFiles_x64
    AddReg    = ScanCoInstaller_AddReg_x64
    [ScanCoInstaller_CopyFiles_x64]
    CNCLSO36b.dll
    [ScanCoInstaller_AddReg_x64]
    HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
    ;........................................ WinVista(64-bit) section(Network)
    [CNCInstallNet_VISTA.NTamd64]
    Include=sti.inf
    Needs=STI.SerialSection
    SubClass=StillImage
    DeviceType=1
    DeviceSubType=0x1
    DeviceData=CNCDeviceData_VISTA
    AddReg=CNCAddreg,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
    CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
    ICMProfiles="sRGB Color Space Profile.icm"
    ; used for push button event
    Capabilities=0x11
    Events=PushButton.Events
    DriverVer=06/17/2009, 11.3.0.0
    FriendlyName=%CNC.FriendlyName%
    [CNCInstallNet_VISTA.NTamd64.Services]
    Include=sti.inf
    Needs=STI.SerialSection.Services
    [CNCInstallNet_VISTA.NTamd64.CoInstallers]
    CopyFiles = ScanCoInstaller_CopyFiles_x64
    AddReg    = ScanCoInstaller_AddReg_x64
    [ScanCoInstaller_CopyFiles_x64]
    CNCLSO36b.dll
    [ScanCoInstaller_AddReg_x64]
    HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
    ;.......................................... Common Section
    [PushButton.Events]
    PushButtonPushed1=%PushButtonPushed1%,{66F2A894-EC9B-430c-9D52-E8719D200DAC},%ButtonApp%
    PushButtonPushed2=%PushButtonPushed2%,{506AC8D1-E030-4f05-8F8A-4476153E2D6C},%ButtonApp%
    PushButtonPushed3=%PushButtonPushed3%,{9813E8A6-3652-4768-9AD1-C89E9B5CA956},%ButtonApp%
    PushButtonPushed4=%PushButtonPushed4%,{03B58D10-0245-4859-A489-D695C7729FB3},%ButtonApp%
    [ColorFiles.NT]
    CNZ005.ICC
    CNFR08.ICC
    [CNCDeviceData]
    TwainDS=%CNC.TwainDS%
    SpecialInfo=%CNC.SPInfo%
    DeviceKey=%CNCRFN%
    InstallDirectory="\TWAIN_32\%CNCRFN%\"
    KeyNamePath=%KEYNAME%
    DefaultKeyNamePath=%DEFAULTKEYNAME%
    [CNCDeviceData_VISTA]
    TwainDS=%CNC.TwainDS%
    SpecialInfo=%CNC.SPInfo%
    DeviceKey=%CNCRFN%
    InstallDirectory="\TWAIN_32\%CNCRFN%\"
    KeyNamePath=%KEYNAME%
    DefaultKeyNamePath=%DEFAULTKEYNAME%
    UI Class ID={DF89C549-D67D-4fb0-A575-547073BFAB11}
    ;The above GUID reused from sample MUST change for each Model.
    [CNCAddreg]
    HKLM,"%SGDKEY%","DeviceName",,%CNC.MDL%
    HKLM,"%SGDKEY%","SeriesName",,%CNC.SRS%
    HKLM,"%SGDKEY%","Manufacturer",,"Canon Inc."
    HKLM,"%SGDKEY%","ProductFamily",,"TWAIN Scanners"
    HKLM,"%SGDKEY%","ProductName",,%CNC.MDL%
    HKLM,"%SGDKEY%","InstallDirectory",,"%10%\TWAIN_32\%CNCRFN%\"
    HKLM,"%SGDKEY%","DeviceDriver",,"SCANINTF.DLL"
    HKLM,"%SGDKEY%","ProductId",,"MF8300          "
    HKLM,"%SGDKEY%","DataSourcePath",,"%10%\TWAIN_32\%CNCRFN%\cisds.ds"
    HKLM,"%SGDKEY%","TextEnhance",0x00010001,0
    HKLM,"%SGDKEY%","HiDefinitionMode",0x00010001,0
    HKLM,"%SGDKEY%","AutoPreview",0x00010001,0
    HKLM,"%SGDKEY%","AutoClose",0x00010001,0
    HKLM,"%SGDKEY%","SavePreview",0x00010001,1
    HKLM,"%SGDKEY%","DriverDate",,"06 2009"
    HKLM,"%SGDKEY%","DriverVersion",,"11.3.0.0.mf09"
    HKLM,"%SGDKEY%","ColorGear",,%CNC.ColorGear%
    HKLM,"%SGDKEY%","ColorMatch Platen",,"CNFR08.ICC"
    HKLM,"%SGDKEY%","SGIPPDEF",,"CNCFR08.DAT"
    HKLM,"%SGDKEY%","Descreen",0x00010001,0
    HKLM,"%SGDKEY%","Unsharp",0x00010001,3
    HKLM,"%SGDKEY%","MultiLimitThreshold",0x00010001,180
    HKLM,"%SGDKEY%","MultiJackUp",0x00010001,9
    HKLM,"%SGDKEY%","MultiTrimJackUp",0x00010001,20
    HKLM,"%SGDKEY%","CardPhotoDistThr",0x00010001,30
    HKLM,"%SGDKEY%","PhotoTrimThr",0x00010001,210
    HKLM,"%SGDKEY%","PhotoRThr",0x00010001,210
    HKLM,"%SGDKEY%","PhotoGThr",0x00010001,210
    HKLM,"%SGDKEY%","PhotoBThr",0x00010001,210
    HKLM,"%SGDKEY%","CardTrimThr",0x00010001,30
    HKLM,"%SGDKEY%","CardRThr",0x00010001,30
    HKLM,"%SGDKEY%","CardGThr",0x00010001,30
    HKLM,"%SGDKEY%","CardBThr",0x00010001,30
    HKLM,"%SGDKEY%","ParWhiteBlackEth",0x00010001,5
    HKLM,"%SGDKEY%","ParWhiteBlackEthDG",0x00010001,5
    HKLM,"%SGDKEY%","ParWhiteBlackSth",0x00010001,35
    HKLM,"%SGDKEY%","ParWhiteBlackVth",0x00010001,10
    HKLM,"%SGDKEY%","ParLabelingHth",0x00010001,30
    HKLM,"%SGDKEY%","ParLabelingLeft",0x00010001,1
    HKLM,"%SGDKEY%","ParLabelingTop",0x00010001,1
    HKLM,"%SGDKEY%","ParLabelingRight",0x00010001,1
    HKLM,"%SGDKEY%","ParLabelingBottom",0x00010001,1
    HKLM,"%SGDKEY%","DT_Left",,"10"
    HKLM,"%SGDKEY%","DT_Top",,"0"
    HKLM,"%SGDKEY%","DT_Width" ,,"1.5"
    HKLM,"%SGDKEY%","DT_Length",,"4.5"
    HKLM,"%SGDKEY%","DT_Border_1",,"2.5"
    HKLM,"%SGDKEY%","DT_Border_2",,"3.5"
    HKLM,"%SGDKEY%","DT_BkTh",,"18"
    HKLM,"%SGDKEY%","DT_MinWhThr",,"15"
    HKLM,"%SGDKEY%","DT_MaxWhThr",,"45"
    HKLM,"%SGDKEY%","ButtonNum",0x00010001,1
    HKLM,"%STIKEY%","MF8300",0x00010001,1
    [CNCAddreg.USB]
    HKLM,"%SGDKEY%","AvailableDriver",0x00010001,1
    [CNCUSDAddreg_XP]
    HKLM,"%WIASGDKEY%","ColorMatch",0x00010001,1
    HKLM,"%WIASGDKEY%","ColorGear",,"%CNC.ColorGear%"
    HKLM,"%WIASGDKEY%","TextEnhance",0x00010001,0
    HKLM,"%WIASGDKEY%","Descreen",0x00010001,0
    HKLM,"%WIASGDKEY%","UnsharpMask",0x00010001,0
    HKLM,"%WIASGDKEY%","HiDefinitionMode",0x00010001,0
    HKLM,"%WIASGDKEY%","ProductId",,"MF8300          "
    HKLM,"%WIASGDKEY%","ButtonNum",0x00010001,1
    HKLM,"%WIASGDKEY%","DspGamma",0x00010001,1
    HKLM,"%WIASTIKEY%","MF8300",0x00010001,1
    HKR,,USDClass,,"{4BA01336-9934-455e-8FB8-4A47A638DF0E}"
    HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E},,,"Canon USD"
    HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,,,%11%\CNCC8300.DLL
    HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,ThreadingModel,,"Both"
    ;  The above GUID is specific to MF8300 and MUST change for a different model.
    [CNCUSDAddreg_VISTA]
    HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11},,,"WIA Driver UI Extension"
    HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11}\shellex\ImageProcessingFilter\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}
    ;  The above GUID is specific to MF8300 and MUST change for a different model.
    HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC},,,"Canon Image Processing Filter"
    HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,,,%11%\CNCE8300.dll
    HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,ThreadingModel,,"Both"
    ;  The above GUID is specific to MF8300 and MUST change for a different model.
    [WiaFiles]
    CNCC8300.DLL
    CNCI8300.DLL
    CNCL8300.DLL
    [Wia2Files]
    CNCC8300.DLL
    CNCI8300.DLL
    CNCL8300.DLL
    CNCE8300.DLL
    [CNCDsFiles]
    CISDS.DS
    SGUI.DLL
    SGUI_RES.DLL
    WIARES.DLL
    IOP.DLL
    ITLIB32.DLL
    SCANINTF.DLL
    TPM.DLL
    CNCFR08.DAT
    MC2.TXT
    JDA_CIMG.DLL
    NBS4MB.DLL
    NBSCOR4M.DLL
    RMSLANTC.DLL
    RSTCOL.DLL
    [MPScanLLD]
    CNCMFP36.INI,,,0x20
    CNCLSI36b.DLL,,,0x20
    CNCLSD36b.DLL,,,0x20
    CNCLSC36b.DLL,,,0x20
    CNCLST36b.DLL,,,0x20
    CNCLSU36b.DLL,,,0x20
    [CNCMediaFiles]
    CSSAMP1.MID
    ;-------------------------------Source Index
    [SourceDisksFiles]
    CNZ005.ICC=1
    ITLIB32.DLL=1
    JDA_CIMG.DLL=1
    NBS4MB.DLL=1
    NBSCOR4M.DLL=1
    RMSLANTC.DLL=1
    RSTCOL.DLL=1
    CISDS.DS=1
    SGUI.DLL=1
    IOP.DLL=1
    SCANINTF.DLL=1
    TPM.DLL=1
    SGUI_RES.DLL=1
    WIARES.DLL=1
    CSSAMP1.MID=1
    CNCFR08.DAT=1
    CNFR08.ICC=1
    MC2.TXT=1
    CNCC8300.DLL=1
    CNCI8300.DLL=1
    CNCL8300.DLL=1
    CNCE8300.DLL=1
    CNCMFP36.INI=1
    CNCLSI36b.DLL=1
    CNCLSD36b.DLL=1
    CNCLSC36b.DLL=1
    CNCLST36b.DLL=1
    CNCLSU36b.DLL=1
    CNCLSO36b.DLL =1
    [SourceDisksNames]
    1=%D1%,scan.cab,
    ;-------------------------------String Aliases
    [Strings]
    Msft="Canon"
    Mfg="Canon"
    SGDKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\11.3\Devices\MF8300"
    STIKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\STI"
    DEFAULTKEYNAME="Software\Wow6432Node\Canon\SateraMFP1\Toolbox Ver4.9\Devices\"
    KEYNAME="\Software\Canon\MFToolbox\"
    WIASGDKEY="Software\Canon\SateraMFP1\WIA\3.0\Devices\MF8300"
    WIASTIKEY="Software\Canon\SateraMFP1\WIA\STI"
    D1="Canon MF8300 Series Setup Disk"
    LPTENUM\CNC.DeviceDesc="Canon MF8300 Series"
    ButtonApp        = "MF Toolbox Ver4.9"
    CNCRFN           = "MF8300"
    CNC.MDL          = "Canon MF8300"
    CNC.SRS          = "Canon MF8300 Series"
    CNC.DeviceDesc   = "Canon MF8300"
    CNC.SPInfo       = "Canon MF8300 Scanner"
    CNC.TwainDS      = "Canon MF8300 Series"
    CNC.ColorGear    = "FR08"
    PushButtonPushed1= "Scan-1"
    PushButtonPushed2= "Scan-2"
    PushButtonPushed3= "Scan-3"
    PushButtonPushed4= "Scan-4"
    CNC.FriendlyName     = "WIA Canon MF8300 Series"
    greeting
    Sixten

    How I fixed it, at least for now:
    1. I've been using OC Genie for a few days, it has been working great on Windows but I guess it was causing many games to crash to the desktop so I decided to turn it off, since then the memory issue started to happen, since this morning.
    2. I can only think of my computer got OC Genie addicted, like addiction to crack or cocaine, and the memory, or call it nervous system, wanted more OC Genie, so it gave it to him and bingo, my 4GB readable, but then I used of trickery and deceit to disable OC Genie again and my 4GB is back again without OC Genie.
    Hope this helps someone.

Maybe you are looking for