Mail agent

добрый день. После загрузке обновления iOS 5.1 перестал работать почтовый агент. Через настройки пытаюсь запустить программу настроек почты, адреса, календари - программа сразу "вылетает". Что делать?

You mean like Eudora or Outlook?

Similar Messages

  • Mail Agent null

    Hi
    In adapter monitoring i got "Mail agent null"  Error... whats it means....
    Thanks & regards
    Ravi Shankar B

    Hi,
    Please can you look at this thread. Same issue
    XI 3.0 Mail-Adapter Problem
    Re: mail sender channel
    Regards
    Vijaya

  • How is the Mailing Agent permit generated on a mail.dat

    The business I work for has multiple permits, and they all appear to be associated with our CRID. I can change the Permit Holder's permit as needed, but I can't seem to change the Mailing Agent permit, and I'm not sure where the information is pulled from. The default permit that always appears on our submitted postage statements is our mailing permit that cannot mail First-Class or Non-profit, and I need to change it to our permit that can. At first I was expecting that I could switch this in Postlsoft, but the further I dig, the more it looks like PostalOne! automatically associates a permit number when it sees our CRID or Mailer ID.
    Could anyone confirm this or give some assitance? Thanks

    According to PostalOne! Mail.dat tech guide available on RIBBS [https://ribbs.usps.gov/intelligentmail_guides/documents/tech_guides/datspec/PostalOneMailDatTechSpec.pdf]
    Mailing Agent (Preparer). This identifies the organization that prepared the mailing and/or delivered it to the postal service for mailing. This information is linked to the useru2019s login account, and is not represented in the Mail.dat file.
    To attach a Mail.dat file to a preparer permit, the PostalOne! System looks at the User ID that submitted the file. The system looks at permits linked to the locations that User ID is also linked to. The system looks at the post office of mailing. The system considers finance number association of permits linked to locations to finance number of post office of Mailing. If the system finds more than one permit possibility, system takes first active (type PI) permit (could be any of the linked locations, not necessarily the one that submitted the file). For this reason the attached preparer permit may not be accurate and the user may not be able to fix it.
    In the Mailing Agent block on the Postage Statement, the company name and address information found from the associated CRID in the Mail.dat MPA Preparer CRID shall be displayed. If the Mail.dat file MPA Preparer CRID is used, then the preparer permit number, telephone number, email address, or customer number will not be displayed. The submitter of the Mail.dat file may update this CRID. The owner of the CRID may update the name and address information associated with the CRID. If the Mail.dat file MPA Preparer CRID is blank, then the Mailing Agent block will be filled with the name and address information found from the preparer permit attached to the Mail.dat file (see above). The preparer permit number and the associated company name, address, telephone number, and email address will be displayed. The name and address information on this permit may be updated by the postal clerk and will apply to subsequent Mail.dat updates.

  • TS3276 Can I hide my mail agent details that are usually added to each mail I send?

    I am trying to hide my mail agent details being sent out along with every email I shoot.

    Anonymous remailer - Wikipedia, the free encyclopedia

  • Which mail agent do you use?

    a while back we had "what http daemon" and "what ftp daemon" do-you-use posts...
    so I'm curious about mail agents... qmail? exim? the dreaded sendmail?

    Courier-MTA (as a whole set of programs) is most complete which means you don't have much work finding other elements for your mail server. They are already there and work together very well. The minus is the lack of practical documentation (comparing to other MTAs) and some kind of orthodoxy in implementation (some people think it's not practical).
    Exim is also a very good and well designed MTA with nice and easy to read docs.
    Postfix does not look so orderly but it's probably the most configurable. The docs are a bit spread over the web but the amount of guides and howtos is probably the highiest among all big 3 MTAs (check out some MTA mailing lists - it's probably most popular MTA so naturally most weird config has already been tried by someone).
    Most if not all of the typical tasks can be done using any of the above.
    If this is your first MTA and you want a simple setup and at the same time you don't want to spend time on searching and tweaking components of a mail server (POP, IMAP, webmail etc.) choose Courier-MTA. Courier-MTA is probably the least popular among the big 3 MTAs (but not because of its quality).
    If you need more from MTA and want good examples of working configs but your setup is not very complex and you are not the type of person who likes to write lots of scripts choose Exim.
    If you want some special configuration, tons of examples and docs and have time to dig in it and customize to your needs (in other words you want it as flexible as possible), choose postfix. Postfix is very often a choice of internet providers.
    The above is only my opionion based on my experience and is only an advise for fubar (so don't flame! I'm burnproof :-))

  • I dont see the e-mail icons in the agent desktop

    hi, i enabled the e-mail agent funtion, i created a e-mail queue, and i made the exchange configuration, but i dont see the icons on the agent desktop
    why? does anyone know?
    the version of the ccx is the 7.0 SR5
    thanks in avanced

    The icons wont become available until the e-mail agent system is configured (via the Desktop Administrator web interface).

  • How to configure sender mail adapter

    Hi,
    My scenario  Mail-XI-file. In adapter monitoring it is giving me error "not initialized: mail agent null". What do we exactly mean by this??
    and can anyone suggest any blog as how to configure sender mail adapter.
    Kindly help
    Anu Singhal

    Hi Anu,
    Just check this link
    http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
    and this 1
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
    Rewardif helpful
    Reagards
    Sachin

  • E-mail bounce For system.

    We are trying to send an e-mail from my personal address  the e-mail address (XXXX). This last e-mail addressed is connected to the (XXXX) e-mail address. Which will be delivered at the CP4 system.
    However this mail is being bounced.
    After checking the system we've found out that the connection from the mail server to the CP4 is working fine. However the mail does still not receive in SAP. Can you please check this issue. Maybe within SAP, maybe on unix mail-agents which are not running fine, or port-binding which is not correct.
    I have checked  
    (1) <sm37>  :   SEND SAPCONNECT INT   >>> suuccesfully.
    (2) ,scot>   : every thing is ok (green)
    (3) <sost>   : erroe >> Cannot process message in SAP System , long text >> No ESMTP Plug-In Is Available for SAPconnect
    Application Server Used by the Send Process:
    plsapcp401
    As per sap note this parameter   rdisp/start_icman = true 
    (4)  <rz11>  rdisp/start_icman = true
    (5)from os level >> ping mail host mail port >> its pinging
    Regards
    mohsin mulani
    Edited by: mohsin mulani on Sep 23, 2008 5:39 AM

    Hi mohsin,
    Check in SMICM that the ICM is actually up and running. Some times it doesnt start automatically. Then check if you have configured the SMTP service in SMICM -> Goto -> Services and there should be an entry for SMTP.
    If not you will need to create one in SMICM (455140 gives the RZ10 instance parameters).
    Hope this helps
    Michael

  • Mail Sender Adapter with IMAPS

    Hi,
    I had a Mail Sender Adapter running fine with imap. Our Email Server has changed now to secure protocol. Therefore I need to use the Mail Sender Adapter with IMAPS. If I use imaps://<mailserver>:993 in the channel configuration the Mail Adapter aborts with error "not initialized; mail agent null" and in the default trace it says "failed to initialize the channel: java.io.IOException: illegal protocol for XMBIMAPInitiator: imaps#". If I configure the Mail Adapter with  <b>imap</b>://<mailserver>:993 the Mail Adapter starts and says "running", but it does not poll the postbox. In the security.log file there is a warning about untrusted certificates "com.sap.security.core.server.https.SecureConnectionFactory#Plain###Attempting to create outgoing ssl connection without trusted certificates#". I did already import the (CA) Certifcate of the mailserver with key storage service of J2EE Engine in the Trusted area and I configured the J2EE Engine for using SSL (the https access to the J2EE Engine works fine).
    What is still missing in XI 3.0 (SP12)? I can access the postbox securely with e.g. Thunderbird using port 993.
    Has anyone an idea or had already this issue?
    Thanks for any help in advance.
    Peter

    Hi Sebastian ,
    The Mail sender --IMAPS , did  it solve your issue because i fcae the same kind of Error in Communication Channel :
    exception caught during processing mail message; java.io.IOException: unable to create a socket
    Mail sender CC:imaps://NZxxx.dknz.nzcorp.net:993/NZDKINVOICES
    -Login Credentials is correct.
    -Defualt XI Paramters are correct
    -Mail Server is the right one
    -Tried in command prompt , N:/telnet NZxxx.dznz.corp.net 143 , but i get response : Could not open connection to the host, on port 143 .Connection Failed
    Could you kindly assist
    Thanks,
    Vara

  • How to save mail content in IE ?

    I can save each mail in Netscape with 'save frame as',but can't save mail in Internet Explorer.
    Anyone know how to save mail in IE ?

    We have the Same Problem!
    We believe that this issue must be tryed here.
    We wish take message's bakup locally in the hard disk without use OutLook or other mail agent.
    We need to free space in the server saving the messages locally with file/save as.. the html page, and we cannot make this task with Internet Explorer ver 6.0.
    We use Mozilla and operate perfectly , but in IE doesn't.
    We believe the solution is "see" the message without Frames.
    The question is: How we can convert the message to pure HTML to can save it in IE.
    Thanks,
    Oscar A.

  • Sending mails without using sendmail service. Is that possible?

    Hi all,
    I am considerably new to Solaris.
    I have a query,
    Is it possible to send mails out without using sendmail service?
    If so how can they be implemented in,
    Solaris 7?
    Solaris 8?
    Solaris 9?
    If it is not possible, are there any workarounds to achieve this or else this cannot be implemented at all?
    It would be really great if someone could shed light on this query.

    Your question is a little ambiguous. However, I will try to answer it.
    You need to use a program to send the email for you. On Solaris by default this is sendmail. However, it can be used in a number of modes.
    1. It can be run as a daemon, listening on port 25 for new messages to be delivered to it.
    This is enabled by default but is not necessary for sending email. If you wish to switch sendmail off as a service in Solaris10 then you should type 'svcadm disable svc:/network/smtp:sendmail'. If you wish to switch it off on earlier Solaris releases you will need to move/erase the startup script in either /etc/rc2.d or /etc/rc3.d.
    2. It can be run in 'immediate mode' to send mail immediately.
    This allows you to send a mail directly to someone. On a normally configured sendmail instance it will try to deliver the mail immediately - if the server at the other end is unavailable, the mail will be queued locally to be potentially delivered at a later date.
    3. It can run in delivery only mode to attempt to send queued mail
    Queued mail will not automatically get processed. Sendmail needs to run at a later date to attempt to deliver any queued mail. This can either be done via cron using 'sendmail -q' or sendmail can be left running the whole time and told to rerun the queue in given periods ie 'sendmail -q15m'
    There are alternatives to sendmail for delivering mail - postfix, exim, qmail are just three examples. I would advise against trying to deliver mail without using a specific mail agent to do it. Whilst the SMTP mail protocol is pretty simple in basic use cases the protocol does get complex. There is no real downside in using an established program.
    HTH.

  • Removing "Notification Detail Link" in notification mails

    Hello.
    Is it possible removing the attachment "Notification Detail Link.html" attached in the outgoing notification EMails?
    In the case, I have to do the set directly in the Workflow design, or is it a configuration in the Mailer Agent?
    Any help is appreciated.
    Regards,
    Umberto

    Hi,
    In workflow version 2.6.3, this is available by simple changing the notification preference to be "HTML mail"
    "MAILHTM2". If you want it as an attachments, the preference is "HTML mail with attachments"
    Cheers,
    Raja

  • OS X Mail - excess data usage

    I have been struggling with extreme data usage - approaching the 300GB/mo Comcast allotment.  I do not stream HD content or play multi-player games, etc, the normal drivers of high data usage.  Other investigation of Wi-Fi looking for pirates, etc show no unexpected devices using my modem/router.  I closed the router firewall to bittorrent, kazaa, etc.  I finally noticed in the Network tab of the Activity Monitor that Mail was the highest consumer of inbound data, to the tune of 250 KB/sec, which can pile up a GB pretty fast!  Restarting Mail clears the problem.  I finally was watching the monitor while moving through mail messages and when I hit an HTML message with several images, there was a long pause trying to display the message content and eventually just broken images displayed - and usage went to the ~250 KB/sec level!  Going to another message and returning to the "trigger" message showed the images fine, so they HAD been downloaded/cached, but perhaps Mail doesn't know it and is in a retry loop?  Usage stays at this level until Mail is restarted, then all is well, even when going back to the trigger message (as expected due to caching).
    This is occurring on an iMac running Yosemite, but I have NOT observed the same behavior (yet?) on MacBook running Yosemite with same Mail config.  My usage has been high for several months, but I had not investigated until recently.  I had been using Postbox as my mail agent since Mavericks due to the IMAP issues with Gmail.  Since Yosemite seems to have solved that I switched back to Mac Mail.  A Comcast level 2 agent said he had heard of some data-loop issue with Mailplane - another Gmail client app for OS X.  Since I do not/had not used Mailplane, I discounted that cause, but it eventually made me wonder and now this issue has surfaced.  Current Mail config has 1 iCloud, 1 Exchange, 3 IMAP Gmail and 1 IMAP Comcast accounts defined.  The trigger message was in a Gmail account, so is that the common denominator??
    Is anyone else seeing this behavior?  Any ideas for a solution?

    The iOS view vs classic view in Mail is not the problem; I've already configured for classic view.
    Mountain Lion itself is.
    My short list (to date) of crappy Mountain Lion behavior; items marked with a double asterisk (**)represent the worst of Mountain Lion for me.
    ** No up/down arrows in scroll bar slider;
    Expose` not as easy to navigate as in Snow Leopard;
    Mail does not request passwords for either receive or send;
    No "Save Draft" icon in Mail compose window (workaround: use command-s);
    "Save As" selection missing in most app menus;
    No separate Search window in Safari (workaround: use Firefox or Opera);
    ** Can't export Mail from Mountain Lion into Snow Leopard if downgrading (I compiled this list before I stumbled on the method in this thread, but I'd prefer to effect this with Unix symbolic links);
    iWork 09 seems to have "circled the wagons" re compatibility with MS Office or LibreOffice (workaround: just use Libreoffice);

  • When I print e-mail

    When I print e-mail  (e-mail only)  the left side of the document is cut off.  How do I fix this?

    Hi,
    What is your mail agent/client or what is your webmail ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • E-mail bounce in sap system.

    We are trying to send an e-mail from my personal address (abc.) to the e-mail address xyz. This last e-mail addressed is connected to the mailreceiveplsapcp400.hs.emeadc.lighting.abc. e-mail address. Which will be delivered at the CP4(production) system.
    However this mail is being bounced.
    After checking the system we've found out that the connection from the mail server to the CP4 is working fine. However the mail does still not receive *in SAP.* Can you please check this issue. Maybe within SAP, maybe on unix mail-agents which are not running fine, or port-binding which is not correct.
    I have checked following setings
    1) <Scot>   -- every think green (ok)
    2) ping mailreceiveplsapcp400.hs.emeadc.lighting.abc. (ok)
    3) <sm37>  -- SAPCONNECT ALL SEND(Finished)
    NOTE  :  we can send mail from sap to xxx  ,but not recieve in sap
    is it require more settings for receiving mail in sap if plsss  help me.
    Regards
    mohsin mulani

    From:     Mail Delivery System [MAILER-DAEMONsmtprelay-eur1.philips.com]
    To:     imc.marketing.lampsphilips.com
    Sent:     2008 Sep 16 11:16 AM
    Subject:     Undeliverable: TEST mail
    Delivery has failed to these recipients or distribution lists:
    imc.marketing.lampsphilips.com
    An error occurred while trying to deliver this message to the recipient's e-mail address. Microsoft Exchange will not try to redeliver this message for you. Please try resending this message, or provide the following diagnostic text to your system administrator.
    The following organization rejected your message: plsapcp400.hs.emeadc.lighting.philips.com.
    NOTE: user try tio send mail in sap system  (not from sap system)
    regards
    mohsin mulani
    Edited by: mohsin mulani on Sep 25, 2008 10:27 AM

Maybe you are looking for