Mail not send to CC persons

Hi all,
I have created one procedure to send email.
In this case To as well CC also there..
But the problem is am not able send mail to CC list persons.
for eg, To: [email protected]
CC: [email protected]
In this case, the person abc got email. he can able to see CC person emailid also.
but the xyz person ddnt get email.
Kindly help me.. ITs very Urgent!!

It is not urgent. If you have an urgent issue, dial the cops/ambulance/firebrigade. If you have a production system down or the like, file a level 1 SR (support request) with Oracle.
But here? This forum has volunteers that offer their free time and their expertise (which their companies pay for), for free. So please - do not claim your little problem as being urgent. That is just plain rude and arrogant on your part.
As for your problem. There is no correlation between the sender and recipient data in the header of an e-mail (send to the mail server via the DATA command), and the sender and recipient data provided to the mail via the MAIL FROM and RCPT TO commands.
The header is just text. You can claim, in the header, that the mail is from [email protected] - and that the CC list include [email protected] But that does not mean that this text data in the header is correct or valid or true.
The mail server expects you to tell it who the recipients are - and you do that via the RCPT TO command. And you need to repeat that command for all the intended recipients of that mail. Including CC and BC recipients.
Who you claim the recipients are in the e-mail header - that is just raw data as far as the mail server is concerned. It does not read that raw data (that you send to it via the DATA command). It does not check the contents. It does not parse the contents. It does not determine the list of e-mail recipients from what you have formatted in the header of that raw mail data.
The onus is on you to ensure that what you list in the e-mail header matches the actual instructions you provide to the mail server as to who the sender and recipients are.

Similar Messages

Email notification is not send to contact person in SRM 7.0

Hi Friends,
        I am in SRM 7.0 and SP03. I am using program '/SAPSRM/OFFLINEAPPROVALSEND' to send notification to approver.
             Email notification is not sending to contact person in SRM 7.0 after all approvers approved the shopping cart. I even enabled checkbox 'Approval of application object' for Contact person (in most cases, the creator of the document) in the SPRO-SAP Supplier Relationship Management-SRM Server-Cross Application Basic Settings-Business workflow-Process-Controled Workflow-Business Process Configuration-Define Recipient of Notifications. Am i missing something or is it how SRM 7.0 Build. I knew that this functionality is there in SRM 5.0 by activate the security level in the user settings(SU01), I also know that this setting will not work if we use Process control workflow. Any input on this..
John.

Hi Masa,
   Thanks for your input. I maintained the below entries but still it is not working. creator is not still receiving approved Email once the shopping cart is fully approved.
1 .SPRO-SAP Supplier Relationship Management-SRM Server-Cross Application Basic Settings-Define Transaction Types -
    BUS2121 - SHC - Event Schema as SC.
2. I enabled all four check boxes in this path Define Recipient of Notifications - approve shopping cart - contact person ( in most
    cases, the creator of the document ) .
But I don't know how to maintain or what to maintain for Define Event Schema. This will be highly appreciate if you share your great experience on this..
Hi Masa,
   I got approved Email after 10 mins. I don't know is this how the standard email send to requestor any idea how to change this? I found the Standard task that mail is sending
Document 1000001212 approved
WF-BATCH
to:
XXXXXXX
08/12/2009 03:35 PM
Show Details
Document 1000001212 approved
The document 1000001212 of type BUS2121 was approved.
Technical information:
Event:#APPROVAL_PROCESS_DOC_APPROVED
SubCat:#APPROVAL_RESULT_NOTIFIC_NEW
The following messages have been triggered by the system:
You can view the document directly. Choose the following link :
Login
   I am facing another issue that the Email is having a PORTAL link (Login text above is basically a link), when i click and after login into portal a pop up is displayed 'The specified transaction mode is not allowed with respect to workflow status of current document'. any idea about this issue?
John

Sharepoint 2013 designer workflow mail not sending

Hi
I am doing sharepoint 2013 workflow for mail sending using designer.
I am sending mail when new item created in List.
Here status is completed, but mail not sending the following error comes
"The e-mail message cannot be sent. Make sure the e-mail has a valid recipient".
But i have valid email ID.
If i am sending mail through C# (Visual Webpart), mail sending properly.
Give me solution, Thanks in advance

Can you please check the below threads
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3c76459c-01f5-4d75-be17-ee5b2ce1c1dd/sharepoint-designer-2013-workflow-not-sending-emails?forum=sharepointgeneral
http://social.technet.microsoft.com/Forums/sharepoint/en-US/caee58c6-3128-4241-92e2-62f1d0bff01f/sharepoint-workflow-not-sending-e-mail?forum=sharepointcustomizationlegacy
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answeron that post andVote as Helpful

Since moving to iCloud my mail not sending attachments any answers?

Hi
Since moving to iCloud my mail not sending attachments any answers?

After the migration I started having problems with all NON Apple things.
Now, as of July, 6th this is my situation:
Lion devices and iOS5 devices (MacBook, MacPro, iPhone 4s and iPad I) - fine
have a look here for info:
AUTOMATIC SETUP FOR APPLE MAIL ON LION MACS
http://www.apple.com/icloud/setup/mac.html
Snow Leopard - set up after some trouble using these instructions:
OLDER SERVER FOR APPLE MAIL ON PRE OS 10.7 MACS
http://support.apple.com/kb/HT5330
Non Apple clients should work with these instructions but I still cannot get MailForge to work:
SERVERS FOR GENERIC EMAIL CLIENTS
http://support.apple.com/kb/HT4864
MOBILE NON APPLE STUFF
With my HP (Palm) Pre 3 I am still figuring out why every single day they change the servers:
this however might help you as the Palm is more similar to the BB than the iPhone:
PALM PRE 3 SETTINGS: I also have updated the password on iCloud, deleted the old iCloud account on the Pre, created a new one. Please note that it now sends using the older server, I do not know for how long.
INCOMING
OUTGOING

Apple mail not sending via my server hotmail.

apple mail not sending via my server hotmail. Please help

How would you like us to help when you don't provide any details. We don't have a crystal ball.

Out going mail not sending in mavericks

I've had this problem since upgrading to mavericks, mail not sending and the sntp server showing off line.
I"VE FIXED IT!!!!
Guys hope this helps, the ports show default - 25, 465, 585 in edit smtp settings. Check the next box down - use this port and type in 25, I know its in the default list but its sent my mail when using the custom port.
Hope this helps, I spent all day yesterday on to my server supplier and onto chat with Apple in US but couldnt solve it.
Best of luck!!

For the past few weeks, I have been noticing a similar problem: access to 11 email accounts, and three domains, is blocked on occasion. According to my web hosting company, this is happening because some process was attempting to connect via port 585, an insecure IMAP port; and that an automatic firewall rule was invoked to block those attempts. The blocking would last for about one hour after the last attempt was made to connect.
I'm running Mavericks. If I quit Mail, then restarted one hour later, the problem was resolved. UNTIL Mail attempted to connect to my mail servers, upon which the blocks were triggered again.
I downloaded Little Snitch. It told me, unsurprisingly at this point, that three email accounts were attempting to use port 585 to connect to their mail server. But I DON'T USE IMAP with those accounts! Why Mail is attempting to connect to a port which I haven't configured it to use is the puzzle.
The solution for me: tell Little Snitch to deny any access via port 585.

Mail not sending - and sometimes even worse.

Hello Everyone,
Sorry to bore you all with what is probably a very common issue. I have searched for this but I feel I am going to need personal help here.
My Dad has had his iMac for just over a year now and used Mac Mail to receive email from his two yahoo.co.uk email accounts. Never had a problem. He has a Powerbook G4 with the same two email accounts linked to Mac mail on that laptop too. No issues.
Last week he began to have trouble where by the outgoing mail would not send. It started on the iMac. The G4 was ok. By the following day the G4 was doing it too. It was, a few hundred miles away, happening to me also on my G4. I have a dot mac account and have done for years.
The iMac is still having this issue. It will not send mail. We have deleted the accounts and re attached them with no joy. the lap top appears to be working. As does mine.
Other than deleting the email account in Mails preferences, is there anything else that we should be doing to start a fresh? I really would appreciate some help here. This has completely stumped us!
May thanks,
Philip

Thanks Carolyn,
I will try the cheat sheet to see if it helps. I must say the whole issue is highly strange. It's an issue that is affecting my Dad's computer, but the problem also affected me in exactly the same way at the same time, hundreds of miles away, and with totally different ISP's and ESP's. He has two Yahoo accounts and I have a Mac account!
The problem has just gone away for me but it continues to plague my poor Dad. I have been with Mac since 2004 and although it has only happened a handful of times, it has happened before and I could never get to the bottom of it. And eventually it also just went away. But it's been a couple of weeks now for my Father.
It must be something to do with Mac Mail or the operating system. We'll try the cheat sheet, but I'm quite certain his details are all correct. I even deleted all of the accounts and server address's over the weekend and started a fresh. It was ok for a day or so but has now started again.
I rarely criticise Mac, and am not really doing so now, but I think this is an issue they have and need to solve.
Many thanks,
Philip
Message was edited by: double_ohh7

E-mail not sending certain attachments

Hi,
Not sure if this is correct place to post this but I was directed here from the MobileMe discussion board.
The mail program on my MAC also my MobileMe and Gmail I just discovered will not send audio and video files except to one person. I was able to to this until recently. Before anyone asks, this is NOT copyrighted stuff.
Any suggestions.
Thanks.

This should be the place, and perhaps cooler heads than in the mobilme section... with all the problems I hear about!
Can you elucidate about what is happening when you try?
Does it not atach? Does it refuse to go? Or does it not just show up on the other end?
BTW, eMail was never really meant for such large files to be sent, and due to how eMail works, a 1MB file is sent as 2 MB file.

Mac Mail not sending from correct account.

I constantly use Mail to send and receive emails on my MacBook.
On it I have three email 'accounts' - my me.com address (for formal emails to work, banks etc.), my "junk" address (for spam, gaming etc.) and my "home" address (for personal emails and everything else).
When typing an email, if I choose to send it from a different account than the one I originally selected, I can just change it in the 'From' pop-down menu (under the 'To', 'Cc', 'Bcc' and 'Subject' fields).
Recently though, for some reason when I want to send an email from my "home" address, it sends it from my "junk"one instead, even if I am sending it 'From' my "home" address.
It still has my "home" address' signature, and not every time it does send from my "junk" one instead - rather it seems to send from both as it feels up to.
This bothers me quite a bit, especially when I send an important email using my "home" address but it sends from my "junk" - both confusing and annoying me and the recipients.
This only just started happening to me this past week. Does anyone else have the same issue, and any help would be greatly appreciated

Some mail servers such as gmail will change the address when sending from one account through another account's server.
Go into Mail's preferences under Accounts. Highlight each account and make sure the correct outgoing server is listed for that account with the correct user name and password. Each account should have their own. Check the box to use only that server with that account. Do this for all accounts.
If you don't check the box and the server fails, it will move on to the next one in the list. Then you will get the address from that server even though you're sending from a different account.
If the server does fail, you will get a selection box to try again or select another server.

Mail not sending - this works for me...

I have what seems to be an increasingly common problem with Mail in SL. Suddenly not sending. I've read all the advice, which is great and helpful, but the problem here is that this is suddenly happening. No change to any settings, ISP has no problem with the port, I can send from a Mac Pro running Leopard. What seems to work (don't ask me why) is shutting down Mail for at least a minute. I know it makes no sense, and it's doubly annoying, because [it appears] that solutions to problems with Macs are getting closer to the old solutions for wintel - shut down, restart and hope. If possible, sacrifice a chicken simultaneously.
Shame. I was enjoying the Mac experience!

I don't have any problem sending, and using several different SMTP.
If this is only with your laptop, I suspect that in moving from place to place and likely using the Default Port list for the SMTP that it is getting switched from time to time between ports in the list, and not finding the right one sometimes.
If you have a SMTP that will work on, say Port 587 or 465, and never need Port 25, change to Use Custom Port and directly enter the needed port, rather than use the Default list. If, however, your home venue requires Port 25, but moving about requires one of the others, then not a good workaround.
Ernie

Mail not send opened got lotsof code

hi , does anyone know?
mail didnt send then
saying was not connecting once it did
code was going on and on nostop
so i force quit mail.
what does this mean?
Thanks!

props.put("mail.smtp.host", SMTP_HOST_NAME);
props.put("mail.smtp.host", "true");Remove the second line...
Christian

Mail not send when subroutine is call in dynamic actions

Hi Friends,
I have facing a problem in sending a mail through dynamic actions . In this mail is not send to specific user mail-id.
Suggest me . What to be exactly done .
Regards,
Anish

First you have to understand what should be done...
ask your functional consulatant where exactly the Mails need to be retrived For example...
in infotype 0105 subtype '010' generally we have email ids avaialable of the employeee....
may be this helps or not give full specification some one can revert back.
Regards
sas

Why will mail not send when it will receive?

Mail receives correspondence on all accounts, but will not send on the grounds that the server forbids retransmission. However it does work with wegbmail like yahoo and g accessed through safari. How can I resolve this?

Did you check the outgoing mail server setting in each account? Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Notification mail not send

Hi All,
I have an issue in PR workflow.A notification mail is send to user to approve a PR,but the user says that he did not receive that notification mail.He manually goes to transaction & approve the PR & workflow gets completed.
Please let me know how to find out the cause of this problem.In my workflow log it shows workitem approved by the user.
What can be the cause that notification mail is not send.The user email id is maintained in su01.
Please help.
Thanks in advance

Hello,
You wrote:
"As he executed that step manually ,automatically the workitem got deleted from the user inbox"
This is not something that happens automatically. Is the workflow listeing out for an event which tells it that the activity represented by the step has already been done?
I assume you mean the user performed the operation that was supposed to be done via the workflow step, not that he performed the workflow step itself. If the workflow log shows that he did perform the step, then the user is mistaken.
regards
Rick Bakker
Hanabi Technology

Mail not sending pics correctly

why does my apple mail program send pics that can't be opened by PC users. sometimes if I send pictures as "icons" they will open on the other end but that only works once in a while. Any pictures I receive from anyone else open on my end but I have had problems sending pictures ever since I got a Mac. Is something set wrong on my mail program?? Thanks for any help. jetRed

Hello,
Please confirm whether you are in fact running 10.2.x (Jaguar)? Any advice anyone can provide will have to be in relation to that.
Assuming your info is correct, let me suggest that you consider several things:
Is this a new message or a forward?
Are you placing all photo attachments last in the message, and NOT typing or using the Return key between them or after the last one?
Are you using a Signature? If so, does your Signature have any HTML within it?
Have the photos been saved to include a Mac type Preview or Thumbnail? If so try saving without any such specialized metadata.
Keep in mind this forum is for Mail 2.0 and later, and you might get better answers in this forum:
http://discussions.apple.com/forum.jspa?forumID=740
However, let me know if you post a new Topic in that forum, and I will follow you there with other thoughts, if needed.
Ernie

Mail not send to CC persons

Similar Messages

Maybe you are looking for