Mail to legacy system

The scenario is as follows:
I am getting a e-mail from a SAP system which has Adobe Pdf as an attachment.
How can I extract the contents of the Adobe file at XI so that it can be read and used for mappings at XI side
Plz reply
Edited by: pankaj mathur on Jan 5, 2008 12:06 PM

HI,
Refer the following weblog:
It is for reading data from PDF file in Sender Adapter
/people/sap.user72/blog/2005/07/31/xi-read-data-from-pdf-file-in-sender-adapter
Hope this will help.
Regards,
Amitanshu

Similar Messages

  • Interface from Legacy system to Sap

    Hi all,
    I worked in the functional design and implementation of an interface that works to update sales order from a legacy system to Sap
    Now after some test, i receive the ok to move all the program in production enviroment
    I'd like to know and to be sure of all the step to be checked and needed. The mail one for sure are related  the data. So I checked all the custom table I created for this purpose.
    Please advise me If I'm missing some important step
    Many thanks for your help

    I'd like to know and to be sure of all the step to be checked and needed. The mail one for sure are related the data. So I checked all the custom table I created for this purpose.
    'The mail one for sure': What mail one?
    'Custom tables': Why did you create custom tables? Don't you just use a BAPI to update / create Sales Order?
    What do you mean by interface? An RFC (remote enabled function module)?
    In general: Everything you have developed for this, should be in a transport request. I you want to check this, go to the package you created for this development in transaction SE80. Start from the (RFC) interface and check everything this function module needs to function like data elements, domains, structures etc.
    You do need to create new rfc destinations in SM59 (in case you are updating sales order via RFC interface.
    Haven't you moved it from development to quality before?

  • Subroutine used to send idocs to the legacy system.

    Created a subroutine, which is responsible for creating the IDOCu2019S to be sent to the respective Legacy System
    how to do this pls explain regarding this.
    pls send with examples and links regarding this

    Use Apple's Mail instead. It has templates too, and more of them. Other than that, remember:
    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using

    Hi Experts,
                 I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
               I'll get all the required data with field in an excel file.
                 Does any standard transaction exist for it ? Or how to go ahead with it ?
    Thanks and regards,
    Jyoti Shankar

    Hi
    If you are checking for CREATE option then Sales Doc Type
    For more Info goto SWO1 transaction -> BUS2032 --> DIsplay --> Execute --> There SELECT the method which you want to perform... There you can fine the MANDATORY parameters also....
    Or in DISPLAY mode PLACE Cursor on the Required Method and CLick the PARAMETERS button on toolbar...
    That will show the MANDATORY parameters...
    Reward if helpful....
    Message was edited by:
            Enter the Dragon

  • Uploading data from a view in legacy system to SAP

    Hi,
    I am developing a custom table in sap. The data in this table will be loaded from a view which exists in the clients legacy system (Oracle db).There will be no middleware for the data transfer.
    How can this be done in SAP? Can anybody provide a detailed procedure to do this?
    Thanks in advance !!!!

    Hi
    Is the Legacy system capable of calling 'BAPI' or 'RFC'.
    If yes, than you can create a RFC function module and with in the function module, you can write code to populate values to ZTABLE.
    When the Legacy system calls the RFC with values, your Ztable will be updated
    Regards
    Madhan

  • How to get Acknowledgement from legacy system in an Asynchronous scenario?

    Hello Experts,
    My current scenario is to send an invoice from ECC --> ABAP proxy --> PI --> webservice --> Legacy system & I need acknowledgement back to ECC system from legacy system. How SAP XI acknowledgements work in asynchronous scenarios?
    Please guide.
    Thanks & Regards,
    Nidhi Kukreja

    Hi nidhi,
    please check following link
    http://help.sap.com/saphelp_nw04/helpdata/EN/44/932e8896b610bbe10000000a422035/frameset.htm
    Also check this one.
    http://help.sap.com/saphelp_nw04/helpdata/EN/f4/8620c6b58c422c960c53f3ed71b432/frameset.htm
    hope this helps..
    - Deepak.

  • What is the diff b/w flat file and legacy system?

    Hi everyone,
           when v say v r working on scenario FILE to FILE? which format of file r v usually working on? and what is the diff b/w flat file and legacy system?
    thanx

    Hi,
    <i>when v say v r working on scenario FILE to FILE? which format of file r v usually working on?</i>
    >>>Many a times it will be a Flat file with CSV format,Tab delimited format, fixedlength fields.
    <i>what is the diff b/w flat file and legacy system?</i>
    >>>We can not differeniate like this..
    Flat file may come from any systems, it may be live system or legacy system.
    Legacy system- is something like old, or past one. If you talk about SAP , then older versions of SAP can be  called as a legacy system.
    So it may be a file system, or any system which is old version but it doesnot mean it is not in use,
    Regards,
    Moorthy

  • Migrating Open Sales Order From Legacy System (SAP) To SAP System

    Hi Experts,
                 I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
               I'll get all the required data with field in an excel file.
                 Does any standard transaction exist for it ? Or how to go ahead with it ?
    Thanks and regards,
    Jyoti Shankar

    hi jyothi ,
       there are lot of ways of doing it depending on data upload volume it will be decided .
    1) thru abap bdc program which directly uses XL sheet data and creates SO using bapi/FMs.
    2) using scat.functional consultant should be good enough to use this.
    3)lsmw-laborious procedure but achievable.
      reward if helps !!!!!

  • Down Payment to Sales orders from Legacy system

    Hi
    My client has a few downpayments assigned to sales orders in the legacy system. Could someone tell me how to bring these to SAP, and handle them after go live.
    Thanks,
    Ram

    Try to bring this down payments into SAP same way as you would bring  a customer balance, except for that use the Special gl indicator to bring over the balance of down payment.
    Assign points if helpful

  • Open Internal Orders from legacy system

    Hi,
    Is there a way to bring over open projects (Internal Orders) from legacy system into SAP?, especially the way to bring over legacy cost information collected on such projects.
    Would appreciate any help,
    Ram
    Message was edited by:
            Ram R

    Hi
    As such you cannot do this. You download your Legacy system data to an excel sheet and then upload the PO details into SAP using  an LSMW etc.
    Regards
    Dev

  • *Journal Entries while uploading the vendor master data from legacy system*

    hi SAP Folks,
    can any one of you tell me the journal entries while uploading the vendor master data from legacy system to SAP system.
    Eg: legacy system is having 10000 vendors list, 1 reconciliation account and $ 1000000. while uploading all these data from legacy system to SAP what are the journal entries we get.
    thanks in advance.
    Edited by: ravindranath manikonda on Nov 24, 2008 1:12 PM

    Hi
    you will be having  only one entry logically
    i.e. Opening Bal. clrng A/c Dr.
           To Vendor A/c Cr.
    regards

  • Importing Foreign Currency AR & AP Invoices from Legacy system via DTW

    Hi all,
    We're in the process of importing legacy AP and AR transactions using the DTW (Data Transfer Workbench). We've come across an "interesting" issue which I'm sure other implementers must have come across.
    It's quite straight forward importing Local Currency Invoices using the DTW (in our case the LC is GBP).
    However when we want to import invoices in foriegn currency (in our case either EUR or USD), the customer also has a "set" GBP value for these Invoices, e.g.
    550 USD (Business Partner/Document Currency which is a FC) - this is  is the actual Document value
    330 GBP (Local Currency value at that posting date in the legacy system)
    What basically seems to happen in SAP Business One is that firstly it needs an exchange rate defined for the posting date that it's going into SBO for and secondly, even though we added the additional RowTotalFC column to the DTW template and explicity stated the Sterling value in the LineTotal column, it's STILL translating to LC based on the exchange rate from the posting date.
    There's too many invoices to create manually and ideally these need to go in via the DTW. Have any of you come across a situation such as this when, using the DTW, the Sterling value for imported foreign invoices needs to explicity be a certain value?
    Does anyone how to handle this in the DTW?
    Any help will be appreciated.
    Many thanks,
    Mohsen

    Hi Mohsen,
    In my opinion, it is impractical to duplicate legacy data to B1. You either accept B1's logic or calculate all rates backwards (nearly impossible).
    To match with old system transaction by transaction will not going to work.
    Thanks,
    Gordon

  • Reg:when i was uploading data from legacy system

    Hi All,
    it is any Include  program
    for tcode mpr1
    when i was upload the data for forecast values from
    legacy system to sap system .
    only one record is geting updated
    other records are not updateding
    i have retun logic like this
    code,,,,,,,,
    TYPES: BEGIN OF TY_FILE,
            WERKS LIKE MAPR-WERKS,
            MATNR LIKE MAPR-MATNR,
            PRWRT LIKE PROW-PRWRT,
           END OF TY_FILE.
    DATA: IT_FILE TYPE STANDARD TABLE OF TY_FILE,
          WA_FILE TYPE TY_FILE.
    DATA : IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE,
           IT_MARC LIKE MARC OCCURS 0 WITH HEADER LINE.
    DATA : LV_FILE TYPE STRING.
    LV_FILE = I_MPR1USERPAR.
    CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD
      EXPORTING
        FILENAME                = LV_FILE
        FILETYPE                = 'DAT'
        HAS_FIELD_SEPARATOR     = 'X'
      CHANGING
        DATA_TAB                = IT_FILE
      EXCEPTIONS
        FILE_OPEN_ERROR         = 1
        FILE_READ_ERROR         = 2
        NO_BATCH                = 3
        GUI_REFUSE_FILETRANSFER = 4
        INVALID_TYPE            = 5
        NO_AUTHORITY            = 6
        UNKNOWN_ERROR           = 7
        BAD_DATA_FORMAT         = 8
        HEADER_NOT_ALLOWED      = 9
        SEPARATOR_NOT_ALLOWED   = 10
        HEADER_TOO_LONG         = 11
        UNKNOWN_DP_ERROR        = 12
        ACCESS_DENIED           = 13
        DP_OUT_OF_MEMORY        = 14
        DISK_FULL               = 15
        DP_TIMEOUT              = 16
        NOT_SUPPORTED_BY_GUI    = 17
        ERROR_NO_GUI            = 18
        OTHERS                  = 19
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    LOOP AT T_ARTICLES.
        CLEAR : IT_MARA,IT_MARC.
        SELECT SINGLE * FROM MARA INTO IT_MARA  WHERE MATNR = T_ARTICLES-MATNR.
        SELECT SINGLE * FROM MARC INTO IT_MARC  WHERE MATNR = T_ARTICLES-MATNR
                                                 AND  WERKS = T_ARTICLES-WERKS.
      ENDLOOP.
    LOOP AT IT_FILE INTO WA_FILE .
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          INPUT  = WA_FILE-MATNR
        IMPORTING
          OUTPUT = WA_FILE-MATNR.
      T_FORECAST_VALUES-WERKS = WA_FILE-WERKS.
      T_FORECAST_VALUES-MATNR = WA_FILE-MATNR.
      T_FORECAST_VALUES-PERKZ = IT_MARC-PERKZ.
      T_FORECAST_VALUES-ERTAG = T_ARTICLES-PRDAT_NEW.
      T_FORECAST_VALUES-KOPRW = WA_FILE-PRWRT.
      T_FORECAST_VALUES-MEINS = IT_MARA-MEINS.
      APPEND T_FORECAST_VALUES.
      CLEAR : T_FORECAST_VALUES.
    ENDLOOP.
    thanks
    mars

    For creating/uploading the master data from legacy system to SAP we either use below options
    1. BDC (recording)
    2. BAPI
    3. ALE iDoc.
    I would sugguest you to use BAPI and there's already this post which explains few details about the BAPI:
    Problems with BAPI_PROJECT_MAINTAIN
    Regards
    Sreenivas

  • IDOC/BAPI for Production order creation from Legacy system

    Hi all
    We are using an interface to create Production orders from legacy to SAP. Would you recommend an IDOC or a BAPI to create Production orders. If IDOC or BAPI then could you please mention which one?
    thanks a bunch

    Hi John,
    For your purposes, please use BAPI for production order creation from legacy system. There is no standard inbound IDoc available to use. SAP has an IDoc for outbound interface only (message type LOIPRO).
    If there is an inbound IDoc available, I would recommend to use an IDoc.
    IDoc technology has excellent error handling and will allow you to reprocess an error (if any).
    BAPI is also good approach to use and fast in term of  processing.
    For BAPI approach, you can use BAPI BAPI_PRODORD_CREATE.
    Hope this will help.
    Regards,
    Ferry Lianto

  • Updating REBZG (Invoice Reference) from Legacy system

    Need help with updating REBZG (Invoice Ref.) for credit memos.  We are using the BAPI_ACC_DOCUMENTxx series of function modules to post invoices from our legacy system.  It correctly places a u2018Vu2019 in REBZG.  We would like to replace this with the document number from the original invoice. 
    I can create a table of  all credit memos to be updated, but do not know where to insert code to update this field. (both open & closed invoices)
    Any help would be appreciated.

    i think it is either the user exit or the BTE FM. You can use one of these 2 options to update REBZG. I would prefer to use the BTE then the CMOD user exit.
    Where ever you call the bapi add the REZBG value to extension1. Only when extension1 is populated in the BAPI it will hit the exit or the BTE FM.  Here you can move the extension value to rebzg and set check to N.

Maybe you are looking for