Mail To Mail Scenario

Hi
I have a scenario in which i will read mail from a mailbox and forward it to another mailbox. I have done this. But the problem is with the PDF attachment. I can read a text file as attachment and sent to another mailbox as attchment. But i cannot read a PDF, it is either corrupted or some wronf encoding happens or coming as XML output. Please suggest why this happens and how to rectify this.
Regards
Andy

hi,
Have a look into this thread-
Receive mail with PDF attachment into XI and send to ABAP proxy
Also try with Adapter modules..
Regards,
Moorthy

Similar Messages

Is it possible Mail - PCK -File Scenario?

Hi all,
i want to try the scenario in PCK where the mail adapter of PCK will pick the mail from mail server address and it will pass through PCK to the File receiver adapter.
anyone have a related document for this scenario.
Thanks
Ashwin

Hi
PCk -with out XI???
PCk is nothing but enables smaller companies to exchange xml documents with business parter's SAP XI
Business system environment of small business partner is connected via PCk to integration server by means of XI
check this for PCK info
/people/siva.maranani/blog/2005/08/30/pck-cross-sectional-analysis-part-1
/people/siva.maranani/blog/2005/08/30/pck-cross-sectional-analysis-part-2
http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/content.htm
Message was edited by:
Anu Ram
Message was edited by:
Anu Ram

Receiver Determination Problem In Mail to File Scenario.

Hi All,
I am trying to do Mail to File Scenario. I defined two business systems, one s/w component in SLD and in IR I defined a DataType , MessageType and Two MessageInterfaces. In ID these are mail adapter settings I gave :-
Message Protocol :- POP3
Message Protocol :- XIPAYLOAD
MAIL ATTRIBUTES -- Enabled checkbox for "Use Mail Package"
                                Content Encoding - "base64"
                                Enabled checkbox for "Keep Attachments"
DEFAULT XI PARAMTERS --
                                Default Interface Namespace -- http://mtf
                                Default Interface Name         -- mtf_mi1
And in Modules Tab I also defined the "PayloadSwapBean" module and swap.keyName and swap.keyValue.
Infact I followed all the steps specified in /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
But in SXMB_MONI this is the error I am getting :-
<b><?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error></b>
Please help me out.
Thanks All,
Madhu.

Hi,
Please verify letter by letter if you haven't make a typo here:
Default Interface Namespace -- http://mtf
Default Interface Name -- mtf_mi1
please also make a test of your scenario in integration directory
please also do not use best efort quality of service
/wg
Message was edited by:
        Wojciech Gasiorowski

Mail to Proxy scenario with attachment. AF channel error.

Hi,
We are running SAP PI 7.1. I am experiencing the following problem in a Sender Mail adapter.(POP3).Mail to Proxy Scenario.
I have configured a sender mail adapter channel as POP3. This channel is configured to use the Mail Package and to Keep attachments. When I send a mail with an attachment to the mailbox that is being monitored by this channel, then the channel collects it from the mailbox.
In channel monitoring it indicates that the message was successfully delivered. However when I click on the message ID the view the audit Log it gives an error: u201CTransmitting the message to endpoint http://HOSTNAME:8101/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.io.IOException: Error writing to server.u201D The message never arrives at the integration sever to be view in sxmb_moni.
Also when I sent a message without an attachment the message does go through. Or if I send a message with a text attachment the the message goes through, but not the attachment.
Any help would be most welcome.
Regards
Willie Hugo

Hi Willem,
I'm coming back to your original problem: "com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.io.IOException: Error writing to server.u201D
Actually I had the same problem here and found a solution for it. In this case it was a file to Proxy scenario. The file send was large. After structure conversion the file size was more then 100 MB as indicated in the Audit Log of the message "2009-03-02 09:27:06 Information Send binary file "<File_Name>" from ftp server "<ftpuser>", size 106706248 bytes with QoS EO.
The ICM restricts all HTTP requests larger then 102 MB via the parameter icm/HTTP/max_request_size_KB which has a default value of 102400 (100 MB). Therefore it rejects the requests and your error is thrown.
There are two ways of avoiding this:
1) Increase the parameter:
Increasing the parameter implies a risk since large messages can overload the system (e.g. during the mapping). Therefore it is good to have these safety measurement in place.
2) Split the request:
Depending on the scenario it might be possible to split the request to restrict the max. number of records for a given file. This is the prefered option because it ensures better stability of the system and also better performance.
I think this situation applies to you as well - but I'm not sure since you did not specify the request size and the size of the attachement.
Best regards,
Mike

Mail to proxy scenario with condition

Hi Experts,
I am using mail to proxy scenario.
The mail box is having differnt files suppose:
BOOKING_REF_DELIVERYNO_WB.pdf
BOOKING_REF_SALESORDER_WB.PDF
BOOKING_REF_CUSDECNO_WB.PDF
DELIVERYNO_WB.pdf
SALESORDER_WB.PDF
CUSDECNO_WB.PDF
BOOKING_REF_WB.pdf
BOOKING_REF_DELIVERYNO_BOLCOPY.PDF
BOOKING_REF_SALESORDER_BOLCOPY.PDF
BOOKING_REF_CUSDECNO_BOLCOPY.PDF
BOOKING_REF_BOLCOPY.PDF
DELIEVERYNO_BOLCOPY.PDF
CUSDECNO_BOLCOPY.PDF
SALESORDER_BOLCOPY.PDF
BOOKING_REF_AWB.PDF*
DELIVERYNO_AWB.PDF
SALESORDER_AWB.PDF
CUSDECNO_AWB.PDF
Depending upon the file name in the mail box, the file needs to be attached via proxy with particular code:(x for case 1, y for case 2 , z for case 3)..for attachment abap code wrtiiten for proxy.
how to compare the file name from the mail?
DO i need to write a UDF..mapped with filename field of the sender XSD?How to do that?
Please suggest.
Thanks,
Sushama

You can use the other UDF
public String Get_Input_File_Name(Container container) throws StreamTransformationException
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String SourceFileName = conf.get(key);
return SourceFileName;
the previous one was for XI 3.0 , may be some differnt requiement I am not sure.
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
regards
Ninad

Mail-to-Mail scenario - Problem with comm. channel not reading message

Good day,
I am setting up a Mail-to-Mail scenario, where a received e-mail with an attachment is both processed into a file, as well as a monitoring e-mail needs to be send. The attachment processing is an existing process and is still working properly, but my e-mail isn't send. I am using Java mapping to create the destination e-mail based on the source e-mail. Everything is set up in the Directory as well, and through the Test Configuration feature I have tested my new addition to the existing process, I am seeing the result that I am expecting. I have sent a test message and XI picks it up just fine and processes it which is tested by both SXMB_MONI and the resulting file from the attachment.
However, the monitoring e-mail is not sent. Using the runtime workbench, there is an error in the receiver communication channel, being the following error from the Audit Log:
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: com.sap.aii.messaging.util.XMLScanException: java.lang.NullPointerException; nested exception caused by: java.io.IOException: Parsing an empty source. Root element expected!
Looking through the Message Content, I notice there is a SOAP document describing the source message and two payloads. The first payload being the source message in XML format, the second payload is entirely empty. I suspect this empty second payload is causing the NullPointerException, but I am at a loss as to why the payload is empty. The Test Configuration showed me that the message gets through just fine, so what is going wrong?
Here is a link to the configuration of the communication channel, maybe something is wrong here: [Config of communication channel|http://roald.hoolwerf.net/images/cc-config.png]
My question is: What can I do to find what is causing the communication channel to receive an empty payload, and how can I solve this?
Searching for this issue, or the given error on both Google as these forums hasn't given any related posts, if I did miss them in that case I am sorry for posting and please refer to the related topics.
Thank you in advance for taking time to look at this question.
Kind regards,
Roald Hoolwerf
Edited by: Roald Hoolwerf on Feb 1, 2010 3:57 PM

Try this.
Unchecked the configure use authentication.
and use mail package (base64)

Mail to proxy scenario design

Hello,
In the new requirements, i need to set up mail to proxy scenario in sap PI. The mail comes in with a txt attachment. I can set up a sender mail adapter to fetch the mail and attachment. There are 5 columns in this file attachment. I need to read and map each record to the target message in message mapping. How do I do it? Any helpful answer would be really apprecaited.
Cheers,
Bai

This piece of java code will remove the TAB
//write your code here
StringTokenizer st = new StringTokenizer(record,"\t",false);
String t="";
while (st.hasMoreElements()) t += st.nextElement();
return t;
Edited by: Bai Li on Dec 17, 2010 4:49 AM

MAIL TO FILE SCENARIO--3 MAILINBOX configured in the same Outlook

Hi All,
I have a below requirement :
A vendor is sending an e-mail with attached an invoice (PDF, TIF, etc) to a common Outlook (But can have several mailboxes: eg abc@xxx. com ; xyz@xxx .com)
When a new email arrives in these inboxes (Note : Same Outlook Server ), XI needs to pick up the attachment of the unread mails and place it in the network folder.
I did go through this SDN Link (Mail to File Scenario ) : http://wiki.sdn.sap.com/wiki/display/XI/StepbyStepMailToFileScenario , but have few queries:
- Mail Sender CC should be configured as IMAP4 to read the unread mail , pick up the attachment and place it in network folder.
-Here , how do we configure for several inboxes of same Outlook..?
-Secondarly i believe , mapping is not required in this case as xi just picks up the attachment and place in File location.
Could you please me any info that meets this requirement .
Thanks,
Vara

Here , how do we configure for several inboxes of same Outlook..?
Configure as many sender mail channels as the number of mailboxes.....each pointing to a different mailbox.

Mail to NWBPM Scenario

Hello Experts,
We are working on NetWeaver 7.4 – Process Orchestration.
We have a scenario where on arrival of mail a bpm process gets triggered.
We are using PI mail adapter to trigger the BPM on receiving mail from mail server.
We are able to map process context with mail – sub, message body, from address and other attributes.
Only attachments are missing. We know bpm does not support attachments we need to retrieve the attachments from “pi mail interface’ and save to ECM.
Could anybody help in this matter please?
Thanks

Hi,
how to use mail adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
XI: Dynamic name in the mail attachment - pseudo "variable substitution"
The specified item was not found.
XI: Sender mail adapter - PayloadSwapBean - Step by step
The specified item was not found.
XI: HTML e-mails from the receiver mail adapter ?
The specified item was not found.
Mail Adapter (XI) - how to implement dynamic mail address
The specified item was not found.
S/MIME Security for the MAIL-Adapter within XI
S/MIME Security for the MAIL-Adapter within XI
Configuring sender mail adapter
http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/frameset.htm
XI-MAIL ADAPTER
Basic Spam Protection for XI Mail Adapter
The specified item was not found.
XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
Regards,
Phani

Filter mail account in MAIL to PROXY scenario

Hi all,
I have a MAIL to PROXY scenario, and i would like receive emails only from specific adress.
I try using Mail Package and add a condition in the receiver determination but it doesn´t work.
Is there any way for do this?
Regards,

use xpath in RD to allow only the mail address you want to follow through.
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers

Problem during mail to file scenario

Hi all,
I ve done all configurations but it is showing an error in the Modules tab....
ModuleProcessorException: Error during processing local bean: localejbs/AF_Modulews/PayloadSwapBean caused by:

Hi Sathish,
Go through the links for ur developments.
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
Mail-XI-file scenario
Email Adapter Throwing Error
Error during configuration of Sender Mail Adapter
regards
sreeni

Send attachment (jpg) in scenario Mail to Mail

Hi all,
I have a scenario mail to mail (Mail Adapter) with attachments (jpg image). I receive an email that contains a jpg image and I would like to send it by mail too.
The scenario is working fine, but when the jpg image arrives is destroyed.
I'm using the logic of this blog:
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
but, it doesn't work in my scenario (mail adapter).
Plz help me !!!
Thanks,

Hi,
this document is about a jpg scenario file to mail:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
Hope it helps.
Regards
Patrick

Error: Not able send mail from OWA 2010. When I send mail, the mails go to Drafts Folder.

Error: Not able to send mail from OWA 2010. When I send mail, the mails go to Drafts Folder. I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot: http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
Scenario: I have below configuration of exchange 2010 server Setup:
1. Windows Domain Controller with Global Catalog on Windows Server 2008 which only for Windows 2008 Server Native.
Server Name: WDC2010
Domain: Blazex.Com
2. Hub/Client Access Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Hub/Client Access Exchange role servers.
Server Name: HC2010.blazex.com (This is not a Addition Member server or ADC)
Role: Hub and Client Access Server.
3. Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
4. 2nd Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: 2MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
5. Client Windows 7: It is installed on Windows 7 Ultimate Workstation. As per Microsoft recommendation, I have just installed Windows 7 and then join this computer to Blazex.com.
Workstation Name: WIN7.blazex.com
Role: Workstation
Error Description: I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot (Same As Above): http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
I don't know what I am missing but I think there is some configuration I need to do on Hub/Client Access Server (HC2010). I tried to access the mailbox on XP Client system through OWA. I get the same problem as Win7.
Can someone please help me on this?
Thanks and Regards
Shambhu

Hi Subhash,
I have done the troubleshooting but I didn't find any problem at server side. I will send you mail also with all EXBPA report and as well DC, HC and Mailbox servers' Application Log and System Log.
Below are the questions's answers which was asked by you:
1.     Please check whether you can send email via Outlook.
I am not able to open the MS Outlook. Please check all details in this thread : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
2.     Please run EXBPA to have a health scan.
I have run the EXBPA and didn't see any critical Problem. I have took the screen shot and report. Please have a look in below screen shot link:
a. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/EXBPA.docx                                                                            - Final Report
b. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.BaseLine.200906270226501077.data.xml                        - Baseline Health Check
c. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Connectivity%20Test.200906270223318201.data.xml      - Connectivity Check
d. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Health%20Check.200906270125477730.data.xml            - Health Check with 2 Hr. Baseline option
e. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Permission%20Check.200906270224343377.data.xml      - Permission Report
The error which I received in EXBPA, that allready ignored by you and told that it is bug in EXBPA. Have a look here: http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/d4bb03bb-db84-4a8b-83ba-19937d7dcacf
3.     Please check application log, whether any error event logged there. They could come from ADAccess related error or etc.
I didn't see any ADAccess event on the server. For this I have left my lab PC open and I will check again.
4.     We find that if mail .que gets corrupt, then this issue will occur, please try to move the affected user to another store and then test the issue.
I am facing this problem with all users (7 users). Anyway I moved one user from one server Mailbox Database (2mbx2010) to Other Server Mailbox Database (mbx2010). After that
a) Rebooted the Workstation
b) Login successfully with same user.
c) Delete the Old MS Outlook Profile
d) Create New profile for same user without any problem.
e) Tried to login in MS Outlook and got the same error. : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
f) Open the OWA successfully for Same user.
g) Tried to send mail but again mail went to Drafts Folder.
5.     I noticed that you test the issue after you close outlook. I recommend you to reboot your pc and then access
mailbox via OWA to test the issue.
I tried you suggested option, but sorry it also couldn't help.
6. You also check your disk space.
     All Servers have Enough Disk Space. Check the EXBPA Report.
7. You may run EXTRA to get log information for further troubleshooting.
Need more time for this.
8. Please save application log, system log as *.evt file, then send them with EXTRA,EXBPA report to [email protected] .
   I have sent it as your mentioned mail address OR, you can get the mentioned log from below link also:
   a) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_APPLICATION.evtx           - DC/GC Application Log
   b) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_SYSTEMEVENT.evtx          - DC/GC System Log
   c) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_APPLICATION.evtx              - Hub/Client Application Log
   d) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_SYSTEM.evtx                      - Hub/Client System Log
   e) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_Application.evtx                - Mailbox Application Log
   f) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_System.evtx                      - Mailbox System Log
There will be some error log you will be that the system is not able to communicate with DC/DC, MBX or HC at everyday around 3 AM or some time 6 PM Evening also. These error came because I have installed VM on Windows 7 Workstation and after 45 min or one hrs. if I don't work on PC, then pc goes to sleep. so you may ignore these alerts.
I hope my answer will give you some clue and I expect more help from your side.
With Best Regards
Shambhu Sharma

Options of fetching mails from mail server into PI and also from oracle system

hi All,
Pls extend your help in looking out the possiblity of fetching mails from mail server into SAP PI
and also from oracle system into PI ,earliest help would be appreciated.
and also the types of sources for both the scenarios.
Regards
Vidya Sagar Manda

Hi Vidya,
you can use the email adapter to read/pick up email from mail box.
and use JDBC adapter to read data from table of any database. Please refer the links given to your old thread
Fetch Mails From MailServer using PI and integrate the message into BPM
regards,
Harish

To relocate mail.log, mail.log_current file to specific folder

Hi
We have configured CommSuite 6 in single host. The output of imsimta version:
Sun Java(tm) System Messaging Server 7.0-0.04 32bit (built Jun 20 2008)
libimta.so 7.0-0.04 32bit (built 01:01:00, Jun 20 2008)
Using /opt/sun/comms/messaging/config/imta.cnf
SunOS mail 5.10 Generic_120012-14 i86pc i386 i86pc
Output of imta_tailor file:
IMTA_USER=mailsrv
IMTA_USER_USERNAME=nobody
IMTA_WORLD_GROUP=mail
IMTA_LOG=/logs/messaging/imta
IMTA_PRIMARY_LOG=/logs/messaging/imta/mail.log_current
IMTA_SECONDARY_LOG=/logs/messaging/imta/mail.log_yesterday
IMTA_TERTIARY_LOG=/logs/messaging/imta/mail.log
We need to relocate mail.log, mail.log_current, mail.log_yesterday file to specific folder.
After above setting we cannot be able to relocate above file.
Pl. help us.
Thanks
P.K.

world.group wrote:
We have configured CommSuite 6 in single host. The output of imsimta version:Please note that CommSuite 6 update 1 is now available and it is advisable that you upgrade using the "commpkg upgrade" command.
IMTA_LOG=/logs/messaging/imta
IMTA_PRIMARY_LOG=/logs/messaging/imta/mail.log_current
IMTA_SECONDARY_LOG=/logs/messaging/imta/mail.log_yesterday
IMTA_TERTIARY_LOG=/logs/messaging/imta/mail.logThese parameters are now ignored as per the Messaging Server 7.0 release notes:
http://wikis.sun.com/display/CommSuite6/Messaging+Server+7.0+Release+Notes#MessagingServer7.0ReleaseNotes-Ignoredimtatailorsettings
We need to relocate mail.log, mail.log_current, mail.log_yesterday file to specific folder. You can relocate the MTA log directory through the use of symlinks.
Regards,
Shane.

I downloaded a word file from an inbox mail (the mail app) onto my iPad2, where is this file stored? How can I delete it if it takes up space in my iPad? Any ideas??

I downloaded a word file from an inbox mail (the mail app) onto my iPad, where is this file stored? How can I delete it if it takes up space in my iPad? Any ideas??

Did you ever figure out what happened?
I had the same experience as you did, but in my case it was a big fat pdf that Mail insisted I had to download before I could view it. As happened with you, I saw the file actually downloading, and after a time I was able to view the pdf. It's been my assumption that the pdf is still somewhere on my iPad, but I have no idea where, nor how to delete it if it is still there.
Thanks.

Mail To Mail Scenario

Similar Messages

Maybe you are looking for