Mainataince/Service Order possible in SRM 7.0 SUS ?

Hi Experts ,
We have SRM7.0 and We have requierment  to access the Mainataince/Service Order  by Supplier in SUS. I am sure that is not a part of Std SUS functinality Order Collaboration in Std SUS system
Can anyone please confirm me wheter any how it is possible ?  If yes , how ?
Thanks in advance
NAP

Hi,
Maintenance Order/Customer Service Order are not setup in XI scenario.
PO/Conf/Invoice etc are setup in XI scenario so that you get(see) those(MM) documents in SUS.
Now if you can tweak XI scenario you can get those documents in SUS.
P.S. All documents from MM generates IDoc. I think you should look for IDocs in MM so that you can setup XI scenario accordingly.
I hope it resolves your doubt.
Regards,
yaniVy
reward if helps

Similar Messages

  • Is ATP check possible in Service Order for Sales Item?

    Hi All,
    My question, is ATP check possible in Service Order for Sales Item? My requirement is that when i create a service order in the web UI with a sales item and drill down to the item level, i see the schedule lines assignment block but w/o any Confirming date, so i want to know whether the ATP check is happening or not. For example wen i create a sales order in web UI with a sales item and drill down into the item level, the schedule line AB shows me the Confirming date checking the ATP. But this is not happening in case of service order. So kindly suggest the reason and clarify my query. Thanks
    Regards
    Sridevi

    Nobody can help me???
    Please.
    Thanks

  • Several service cofirmations can be possible from one service order Item

    Dear Experts,
    We create a service order with one service item and create a service confirmation via follow-up function.
    After saving the service confirmation, the status of the service order Item is changed from "Released" into "Confirmed".
    Even though the status of the service item is "Confirmed", we can create a new service confirmation
    for the same item again and again until we set the status "Completed" in the service order header.
    Is the system working as designed?
    Could anyone advise how we can prevent the users from creating a new service confirmation
    from the service item which has been already confirmed(the service order header status is still "Released")?
    Any information would be highly appreciated.
    F.T.

    Hi Fumi
    In standard process  , multiple confirmations are possible for a single service order. there are number of reasons for this
    1. Mutiple engg are working on single service order. and each engg post separate time and expenses in the confirmation
    2. in case of service order which cannot be completed  in a single day. and engg want to book the time daily
    you can still restrict the user to create multiple confirmations  using code.
    Regards
    Naresh

  • SRM Service Orders and Entry sheets,

    Hi Friends,
    Is SRM service orders able to provide the u2018price changeu2019 field? In the R/3 equivalent Service Order entered with item category Service, the u2018price changeu2019 field is available (table ESLL, field PRS_CHG) and we have a business requirement to have this available when we enter SRM Order Service confirmation sheets in R/3. If a service sheet is created from a SRM PO with item category service, u2018price changeu2019 is greyed out. If a service sheet is created from a service PO entered directly in R/3 the u2018price changeu2019 field is not greyed out for input and can be changed. Please can somebody explain how we can make this field available.
    Previous experiences with using functionality this would be highly welcome.
    Thank you. Steven

    Hi,
    You can assign the service master records administered in your company to different groups, according to their usage. Such a group is described by the service category.
    To characterize the service categories in more detail, the latter are assigned an organization status. The organization status indicates the areas in which service master records are used.
    For example, units of your company may use services provided internally by other units of the company, or procure services externally (from other companies). Your company may also provide services for others.
    AS01: If you select this the service master data is at basic data level. That means basic data about the service will be depicted here.
    AS02: Service master stored at basic and CO level. To maintain the information at CO level this organizational status is required.
    AS03: Service master stored at basic plus purchasing level. For procurement purpose(MM), THIS LEVEL is useful.
    Create a po with service activity number in me21n with account assignment category K & and item category D.
    For the SES, the creation date would still be same. Only field ESSR-BUDAT (posting date) would get changed.
    That shouldn't be a problem, since you would know anyway when the SES was created from ESSR-ERDAT, the SES creation date.
    Also the last change date would also be correctly updated.
    You have another field Doc Date ESSR-BLDAT which records the date the SES was posted
    Thank's
    Raj

  • Is it possible to print service order directly with PDF formular?

    does anybody know:
    is it possible to print service order directly with PDF formular?
    i don't mean to use the SE38 calling PRG RSTXPDFT4 to transfer SAP sript into PDF.
    thanks
    RD

    Not possible directly..
    But you can call this tranzaction to convert to PDF  & print. For this you need development

  • Service order from EBP to SUS

    hi,
    following issue observed for service purchase order creation in EBP (SRM7).
    Service structure is not displaying as like in ECC6.
    when i am creating service order in EBP
    service lines are entered at Item level like material.
    giving multiple PO line items in SUS.
    like in ECC we are entering at item detail level in Services tab
    how to get the same in EBP(like under PO item service lines) for each PO item.
    for trnasaction type i have activate the service
    procurement (Hrchy template HIRE_SRM) in EBP .
    but in SUS PO item disctription is not possible,only service lins are displayed as items.
    can any body help.
    regds
    Rami

    Hi Rami,
    In SRM70 the service hierarchy sturcture is not support in SRM PO, Hence you cant see the same in SUS PO.
    Service Hierarchy is supported in Classic mode only(i,e PO has to  be created in ERP)
    Regards
    Sam

  • SERVICE order option in SHOP in 4 STEPS

    Hi,
    We are on SRm 7 ECS.
    In the SHOP in 4 STEPS,is it possible to display link for service order?We tried chnaging the parameter is_scr_itmchoice-temp_lab to X in badi BBP_SC_MODIFY_UI but tahta didnt help.
    Please advise.

    Hello,
    As per standard, this link won't be available in shop 4 steps.
    As far as I know, BBP_SC_MODIFY_UI would be used only to display default settings link in 4 steps.
    Not sure if service order can be displayed in 4 steps.
    Regards,
    Ricardo

  • How to get CRM service order data in R/3

    Hi,
    I want to retrieve service order data from CRM system to R/3, is there any FM for this. Please help as i am new to CRM
    Thanks
    Bobby

    Hi Bobby,
    It is very much possible to upload CRM service orders to SAP R/3 or SAP ECC via standard CRM middleware.
    Please refer to the below SAP help document for complete list of configuration activities for service order upload.
    http://help.sap.com/saphelp_crm50/helpdata/en/f0/5d583c65399965e10000000a114084/frameset.htm
    <b>Do not forget to reward if it helps</b>
    Regards,
    Paul Kondaveeti

  • Travel Expenses settlements against Service Order/WBS Element/Project Ord

    Hi Experts,
    I have one req. in Travel Expenses, i.e. need to settle travel expneses against Service Order/WBS Element/Project Order.
    Can you guide me how to do this req.
    Thanks & Regards
    Rajesh

    Hye mate,
    This is possible for sure what you need to do is to go at travel request . In travel Request there is an option of Enhanced Travel cost/ Alternative master cost center. if you click on it . you would find an option of cost assignmnet click on it
    there you would have option , like an excel sheet like fields of  the cost centre, wbs element, profit center, order number what eve is requred and save it.
    now the cot of trip would go that particulat cost center or der numbe or WBS rather then the cost center assigned at master data in ifototype 0027.
    Regards
    Waqas Anwar

  • Restrict Deletion of Components from Service Order

    Hello All,
    I noticed that I am able to delete the components from the Components tab of a Service Order even after I have completely issued the components.
    Is there a possible way to prevent deletion of components that have already been issued..?
    I think I can use the Business Transaction RMKL in the system status GMPS. But I guess this will prevent deletion of those components which have not been issued to the service order.
    What would be the best way to prevent deletion of components that have already been issued...?
    Thanks
    Jensibo

    Hello All,
    I don't know if you all received the last reply I posted against this thread... coz I am not able to find it in the thread. I had asked for your comments on any repercussions that may occur because of this config.
    Anyway, the thing is, I followed Narashiman's suggestion and although I did not use the exact config he pointed me to, I used the config in the following nodes:
    1.) Production --> Shop Floor Control --> System Modifications --> Define System Message Attributes
    2.) Production Planning & Process Industries --> Process Order --> System Modifications --> Define System Message Attributes
    and added an entry: Application Area = CN, Message No. = 750-Component & item & was already withdrawn and Category = E.
    Having done this, the system did display the "Component & item & was already withdrawn" message when I tried to delete a component that was issued to a service order, but it did not delete the component from the service order. I was able to save the service order with the issued component still in the components tab.
    Narashiman,
    to specifically respond to your latest reply, I did find the node you pointed me to. But the trouble was that it did not have an entry for CN750 in it. When I tried to add an entry, the system did not let me do so and displayed the error message "Please specify a legal value".
    So I went around opening each system message control node and finally found the two that I mentioned earlier that did work for me.
    Thanks
    Jensi

  • SRVR(Service Request) and SRVO(Service Order) are not appearing in IC_Agent

    Dear friends,
    We are planning to implement Service Requests and Service Orders in CRM 7.0 Interaction Center
    The Service Transactions(Service Order/Service Request) are available in 'Service Professional' business role but not available in 'IC_AGENT' role.
    The things i have observed
    1. Without the channel the Transaction Type was not appearing in SAP GUI (CRMD_ORDER)
    2. Even after maintaining the Channels the BUS2000223 (Service Request) did not appear in CRMD_ORDER but the SRVO- Service Order transaction type appeared.(BUS2000116 Service Process)
    3. Have maintained the SRVO and SRVR transaction types as dependent transaction types in the 'Business Transaction Profile'; still when clieck on the Service Request or Service Order create I am getting the below error
    'No transaction type is available for creating a transaction'
    Below is the diagnosis
    Diagnosis
    No transaction type is available when creating a transaction. This can be due to the following reasons:
    No transaction type is available according to Customizing
    The user has no authorization for the transaction type
    System Response
    It is not possible to create the transaction.
    Procedure
    Make sure that:
    The transaction type is set up in Customizing
    The user has authorization for the transaction type
    Can you please guide me where the actual issue is
    Regards
    Raj

    Hi Raj,
    As per your quarries and requirement please go through the link, it will help you in understandable way
    http://help.sap.com/saap/sap_bp/BBLibrary/Documentation/C35_CRM701_BB_ConfigGuide_EN_XX.doc
    Please reward points,
    Cheers,
    Sunil

  • Service Order as follow up document for Service Ticket

    Hi,
    we are using CRM 2005 and the IC-Webclient for the service callcenter.
    Is it somehow possible to create a service order as follow up document out of a service ticket in IC-Webclient?
    Thanks a lot.
    Best regards
    Manfred

    Hi,
    The Service Ticket itself is Service Order. The difference between them is that the Service Ticket does not have Item Category which is present in the Service Order.
    Between your transaction code maintian the copy controls.
    Hope it helps.
    Regards,
    Rajiv

  • Service Orders ,Complaints,Sales Orders,Service Requests, data in Accoun fact sheet screen?

    Hi Team,
    Account related data is not populated in the service order data view and sales order data view and service request view in the account fact sheet screeen?
    We are using account factsheet BP_ACCOUNT_FS...In this account sheet,data is not populated .Service order assignment blocks is not populated..
    Thanks
    Kalpana

    Hi Arden,
    Thanks For your reply.
    They are maintainig the account fact sheet ZCC_FS_ACT in work center ,PFCG role id - SAP_CRM_UIU_IC_AGENT ,.Now account fact sheet is avialbe in work center of icagent.Now if we open any account- then click account fact sheet there is no data is not displayed in assignment blocks of service orders,service sales and ibase all....
    Data is not populating in accoutn fact sheet..,..if  you possible tell me steps and how to do it.?and if you share any information its great and help ful for me?
    Thanks
    kalpana

  • How to raise invoice against a service order

    I would like to raise multiple invoices against one service order. is it possible. i assume service order as a service contract.
    how to do it
    Thanks

    Hi Arul,
    It is possible to create more than one invoice against one service order, if the sum of all the invoices didn´t pass the total of the order.
    Regards,
    Ibai Peñ

  • IW31 Service Order created with reference order,sold to party not populated

    Hello
    If one decides to create a new service order with IW31 but based on an old one using reference order field, not all data's are popullated to the new document:
    It works for some data's like :
    - operations
    - components
    It does not work for the following data's:
    - service order description
    - sold to party
    - main workcenter
    Does someone know if it is possible in the customizing to determine "copy rules"  in order popullating values from the reference document to the new?
    Is it a bug or a SAP standard behaviour?
    Kind regards
    Chris

    Hello,
    The behaviour you have described is correct - Description, partners, main work center are not copied from reference order. See note 197581.
    -Paul

Maybe you are looking for